xref: /src/sys/dev/pci/ppb.c

/*	$NetBSD: ppb.c,v 1.1 1996/02/28 01:46:32 cgd Exp $	*/

/*
 * Copyright (c) 1996 Christopher G. Demetriou.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by Christopher G. Demetriou
 *	for the NetBSD Project.
 * 4. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * XXX NOTE:
 * XXX PROPER OPERATION OF DEVICES BEHIND PPB'S WHICH USE INTERRUPTS
 * XXX ON SYSTEMS OTHER THAN THE i386 IS NOT POSSIBLE AT THIS TIME.
 * XXX There needs to be some support for 'swizzling' the interrupt
 * XXX pin.  In general, pci_map_int() has to have a different
 * XXX interface.
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>

#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcidevs.h>
#include <dev/pci/ppbreg.h>

struct ppb_softc {
	struct device sc_dev;

	/*
	 * Primary bus information.
	 */
	pcitag_t	sc_p_tag;		/* tag of this device */

	/*
	 * Secondary bus information.
	 */
	int		sc_s_num;		/* secondary bus number */
};

int	ppbmatch __P((struct device *, void *, void *));
void	ppbattach __P((struct device *, struct device *, void *));

struct cfdriver ppbcd = {
	NULL, "ppb", ppbmatch, ppbattach, DV_DULL, sizeof(struct ppb_softc)
};

static int	ppbprint __P((void *, char *pnp));

int
ppbmatch(parent, match, aux)
	struct device *parent;
	void *match, *aux;
{
	struct cfdata *cf = match;
	struct pci_attach_args *pa = aux;

	/*
	 * Check the ID register to see that it's a PCI bridge.
	 * If it is, we assume that we can deal with it; it _should_
	 * work in a standardized way...
	 */
	if (PCI_CLASS(pa->pa_class) == PCI_CLASS_BRIDGE &&
	    PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_BRIDGE_PCI)
		return (1);

	return (0);
}

void
ppbattach(parent, self, aux)
	struct device *parent, *self;
	void *aux;
{
	struct ppb_softc *sc = (struct ppb_softc *)self;
	struct pci_attach_args *pa = aux;
	struct pcibus_attach_args pba;
	pcireg_t data;
	char devinfo[256];

	sc->sc_p_tag = pa->pa_tag;

	pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo);
	printf(": %s (rev. 0x%02x)\n", devinfo, PCI_REVISION(pa->pa_class));

	data = pci_conf_read(sc->sc_p_tag, PPB_REG_BUSINFO);

	sc->sc_s_num = PPB_BUSINFO_SECONDARY(data);
	if (sc->sc_s_num == 0) {
		printf("%s: not configured by system firmware\n",
		    self->dv_xname);
		return;
	}

#if 0
	/*
	 * XXX can't do this, because we're not given our bus number
	 * (we shouldn't need it) and we can't decompose our tag.
	 */

	/* sanity check. */
	if (pa->pa_bus != PPB_BUSINFO_PRIMARY(data))
		panic("ppbattach: bus in tag (%d) != bus in reg (%d)",
		    pa->pa_bus, PPB_BUSINFO_PRIMARY(data));
#endif

	/*
	 * Attach the PCI bus than hangs off of it.
	 */
	pba.pba_busname = "pci";
	pba.pba_bus = sc->sc_s_num;
	pba.pba_maxndevs = PPB_SECONDARY_DEVICES;

	config_found(self, &pa, ppbprint);
}

static int
ppbprint(aux, pnp)
	void *aux;
	char *pnp;
{
	struct pcibus_attach_args *pba = aux;

	/* only PCIs can attach to PPBs; easy. */
	if (pnp)
		printf("pci at %s", pnp);
	printf(" bus %d", pba->pba_bus);
        return (UNCONF);
}