qec.c revision 1.41 1 /* $NetBSD: qec.c,v 1.41 2009/03/14 21:04:23 dsl Exp $ */
2
3 /*-
4 * Copyright (c) 1998 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Paul Kranenburg.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 *
19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 * POSSIBILITY OF SUCH DAMAGE.
30 */
31
32 #include <sys/cdefs.h>
33 __KERNEL_RCSID(0, "$NetBSD: qec.c,v 1.41 2009/03/14 21:04:23 dsl Exp $");
34
35 #include <sys/param.h>
36 #include <sys/systm.h>
37 #include <sys/kernel.h>
38 #include <sys/errno.h>
39 #include <sys/device.h>
40 #include <sys/malloc.h>
41
42 #include <sys/bus.h>
43 #include <sys/intr.h>
44 #include <machine/autoconf.h>
45
46 #include <dev/sbus/sbusvar.h>
47 #include <dev/sbus/qecreg.h>
48 #include <dev/sbus/qecvar.h>
49
50 static int qecprint(void *, const char *);
51 static int qecmatch(struct device *, struct cfdata *, void *);
52 static void qecattach(struct device *, struct device *, void *);
53 void qec_init(struct qec_softc *);
54
55 static int qec_bus_map(
56 bus_space_tag_t,
57 bus_addr_t, /*coded slot+offset*/
58 bus_size_t, /*size*/
59 int, /*flags*/
60 vaddr_t, /*preferred virtual address */
61 bus_space_handle_t *);
62 static void *qec_intr_establish(
63 bus_space_tag_t,
64 int, /*bus interrupt priority*/
65 int, /*`device class' interrupt level*/
66 int (*)(void *), /*handler*/
67 void *, /*arg*/
68 void (*)(void)); /*optional fast trap handler*/
69
70 CFATTACH_DECL(qec, sizeof(struct qec_softc),
71 qecmatch, qecattach, NULL, NULL);
72
73 int
74 qecprint(void *aux, const char *busname)
75 {
76 struct sbus_attach_args *sa = aux;
77 bus_space_tag_t t = sa->sa_bustag;
78 struct qec_softc *sc = t->cookie;
79
80 sa->sa_bustag = sc->sc_bustag; /* XXX */
81 sbus_print(aux, busname); /* XXX */
82 sa->sa_bustag = t; /* XXX */
83 return (UNCONF);
84 }
85
86 int
87 qecmatch(struct device *parent, struct cfdata *cf, void *aux)
88 {
89 struct sbus_attach_args *sa = aux;
90
91 return (strcmp(cf->cf_name, sa->sa_name) == 0);
92 }
93
94 /*
95 * Attach all the sub-devices we can find
96 */
97 void
98 qecattach(struct device *parent, struct device *self, void *aux)
99 {
100 struct sbus_attach_args *sa = aux;
101 struct qec_softc *sc = (void *)self;
102 int node;
103 int sbusburst;
104 bus_space_tag_t sbt;
105 bus_space_handle_t bh;
106 int error;
107
108 sc->sc_bustag = sa->sa_bustag;
109 sc->sc_dmatag = sa->sa_dmatag;
110 node = sa->sa_node;
111
112 if (sa->sa_nreg < 2) {
113 printf("%s: only %d register sets\n",
114 device_xname(self), sa->sa_nreg);
115 return;
116 }
117
118 if (sbus_bus_map(sa->sa_bustag,
119 sa->sa_reg[0].oa_space,
120 sa->sa_reg[0].oa_base,
121 sa->sa_reg[0].oa_size,
122 0, &sc->sc_regs) != 0) {
123 aprint_error_dev(self, "attach: cannot map registers\n");
124 return;
125 }
126
127 /*
128 * This device's "register space 1" is just a buffer where the
129 * Lance ring-buffers can be stored. Note the buffer's location
130 * and size, so the child driver can pick them up.
131 */
132 if (sbus_bus_map(sa->sa_bustag,
133 sa->sa_reg[1].oa_space,
134 sa->sa_reg[1].oa_base,
135 sa->sa_reg[1].oa_size,
136 BUS_SPACE_MAP_LINEAR, &bh) != 0) {
137 aprint_error_dev(self, "attach: cannot map registers\n");
138 return;
139 }
140 sc->sc_buffer = (void *)bus_space_vaddr(sa->sa_bustag, bh);
141 sc->sc_bufsiz = (bus_size_t)sa->sa_reg[1].oa_size;
142
143 /* Get number of on-board channels */
144 sc->sc_nchannels = prom_getpropint(node, "#channels", -1);
145 if (sc->sc_nchannels == -1) {
146 printf(": no channels\n");
147 return;
148 }
149
150 /*
151 * Get transfer burst size from PROM
152 */
153 sbusburst = ((struct sbus_softc *)parent)->sc_burst;
154 if (sbusburst == 0)
155 sbusburst = SBUS_BURST_32 - 1; /* 1->16 */
156
157 sc->sc_burst = prom_getpropint(node, "burst-sizes", -1);
158 if (sc->sc_burst == -1)
159 /* take SBus burst sizes */
160 sc->sc_burst = sbusburst;
161
162 /* Clamp at parent's burst sizes */
163 sc->sc_burst &= sbusburst;
164
165 sbus_establish(&sc->sc_sd, &sc->sc_dev);
166
167 /* Allocate a bus tag */
168 sbt = bus_space_tag_alloc(sc->sc_bustag, sc);
169 if (sbt == NULL) {
170 aprint_error_dev(self, "attach: out of memory\n");
171 return;
172 }
173
174 sbt->sparc_bus_map = qec_bus_map;
175 sbt->sparc_intr_establish = qec_intr_establish;
176
177 /*
178 * Collect address translations from the OBP.
179 */
180 error = prom_getprop(node, "ranges", sizeof(struct openprom_range),
181 &sbt->nranges, &sbt->ranges);
182 switch (error) {
183 case 0:
184 break;
185 case ENOENT:
186 default:
187 panic("%s: error getting ranges property", device_xname(self));
188 }
189
190 /*
191 * Save interrupt information for use in our qec_intr_establish()
192 * function below. Apparently, the intr level for the quad
193 * ethernet board (qe) is stored in the QEC node rather than
194 * separately in each of the QE nodes.
195 *
196 * XXX - qe.c should call bus_intr_establish() with `level = 0'..
197 * XXX - maybe we should have our own attach args for all that.
198 */
199 sc->sc_intr = sa->sa_intr;
200
201 printf(": %dK memory\n", sc->sc_bufsiz / 1024);
202
203 qec_init(sc);
204
205 /* search through children */
206 for (node = firstchild(node); node; node = nextsibling(node)) {
207 struct sbus_attach_args sax;
208 sbus_setup_attach_args((struct sbus_softc *)parent,
209 sbt, sc->sc_dmatag, node, &sax);
210 (void)config_found(&sc->sc_dev, (void *)&sax, qecprint);
211 sbus_destroy_attach_args(&sax);
212 }
213 }
214
215 int
216 qec_bus_map(bus_space_tag_t t, bus_addr_t ba, bus_size_t size, int flags, vaddr_t va, bus_space_handle_t *hp)
217 /* va: Ignored */
218 {
219 int error;
220
221 if ((error = bus_space_translate_address_generic(
222 t->ranges, t->nranges, &ba)) != 0)
223 return (error);
224
225 return (bus_space_map(t->parent, ba, size, flags, hp));
226 }
227
228 void *
229 qec_intr_establish(t, pri, level, handler, arg, fastvec)
230 bus_space_tag_t t;
231 int pri;
232 int level;
233 int (*handler)(void *);
234 void *arg;
235 void (*fastvec)(void); /* ignored */
236 {
237 struct qec_softc *sc = t->cookie;
238
239 if (pri == 0) {
240 /*
241 * qe.c calls bus_intr_establish() with `pri == 0'
242 * XXX - see also comment in qec_attach().
243 */
244 if (sc->sc_intr == NULL) {
245 printf("%s: warning: no interrupts\n",
246 device_xname(&sc->sc_dev));
247 return (NULL);
248 }
249 pri = sc->sc_intr->oi_pri;
250 }
251
252 return (bus_intr_establish(t->parent, pri, level, handler, arg));
253 }
254
255 void
256 qec_init(struct qec_softc *sc)
257 {
258 bus_space_tag_t t = sc->sc_bustag;
259 bus_space_handle_t qr = sc->sc_regs;
260 u_int32_t v, burst = 0, psize;
261 int i;
262
263 /* First, reset the controller */
264 bus_space_write_4(t, qr, QEC_QRI_CTRL, QEC_CTRL_RESET);
265 for (i = 0; i < 1000; i++) {
266 DELAY(100);
267 v = bus_space_read_4(t, qr, QEC_QRI_CTRL);
268 if ((v & QEC_CTRL_RESET) == 0)
269 break;
270 }
271
272 /*
273 * Cut available buffer size into receive and transmit buffers.
274 * XXX - should probably be done in be & qe driver...
275 */
276 v = sc->sc_msize = sc->sc_bufsiz / sc->sc_nchannels;
277 bus_space_write_4(t, qr, QEC_QRI_MSIZE, v);
278
279 v = sc->sc_rsize = sc->sc_bufsiz / (sc->sc_nchannels * 2);
280 bus_space_write_4(t, qr, QEC_QRI_RSIZE, v);
281 bus_space_write_4(t, qr, QEC_QRI_TSIZE, v);
282
283 psize = sc->sc_nchannels == 1 ? QEC_PSIZE_2048 : 0;
284 bus_space_write_4(t, qr, QEC_QRI_PSIZE, psize);
285
286 if (sc->sc_burst & SBUS_BURST_64)
287 burst = QEC_CTRL_B64;
288 else if (sc->sc_burst & SBUS_BURST_32)
289 burst = QEC_CTRL_B32;
290 else
291 burst = QEC_CTRL_B16;
292
293 v = bus_space_read_4(t, qr, QEC_QRI_CTRL);
294 v = (v & QEC_CTRL_MODEMASK) | burst;
295 bus_space_write_4(t, qr, QEC_QRI_CTRL, v);
296 }
297
298 /*
299 * Common routine to initialize the QEC packet ring buffer.
300 * Called from be & qe drivers.
301 */
302 void
303 qec_meminit(struct qec_ring *qr, unsigned int pktbufsz)
304 {
305 bus_addr_t txbufdma, rxbufdma;
306 bus_addr_t dma;
307 void *p;
308 unsigned int ntbuf, nrbuf, i;
309
310 p = qr->rb_membase;
311 dma = qr->rb_dmabase;
312
313 ntbuf = qr->rb_ntbuf;
314 nrbuf = qr->rb_nrbuf;
315
316 /*
317 * Allocate transmit descriptors
318 */
319 qr->rb_txd = (struct qec_xd *)p;
320 qr->rb_txddma = dma;
321 p = (char *)p + QEC_XD_RING_MAXSIZE * sizeof(struct qec_xd);
322 dma += QEC_XD_RING_MAXSIZE * sizeof(struct qec_xd);
323
324 /*
325 * Allocate receive descriptors
326 */
327 qr->rb_rxd = (struct qec_xd *)p;
328 qr->rb_rxddma = dma;
329 p = (char *)p + QEC_XD_RING_MAXSIZE * sizeof(struct qec_xd);
330 dma += QEC_XD_RING_MAXSIZE * sizeof(struct qec_xd);
331
332
333 /*
334 * Allocate transmit buffers
335 */
336 qr->rb_txbuf = p;
337 txbufdma = dma;
338 p = (char *)p + ntbuf * pktbufsz;
339 dma += ntbuf * pktbufsz;
340
341 /*
342 * Allocate receive buffers
343 */
344 qr->rb_rxbuf = p;
345 rxbufdma = dma;
346 p = (char *)p + nrbuf * pktbufsz;
347 dma += nrbuf * pktbufsz;
348
349 /*
350 * Initialize transmit buffer descriptors
351 */
352 for (i = 0; i < QEC_XD_RING_MAXSIZE; i++) {
353 qr->rb_txd[i].xd_addr = (u_int32_t)
354 (txbufdma + (i % ntbuf) * pktbufsz);
355 qr->rb_txd[i].xd_flags = 0;
356 }
357
358 /*
359 * Initialize receive buffer descriptors
360 */
361 for (i = 0; i < QEC_XD_RING_MAXSIZE; i++) {
362 qr->rb_rxd[i].xd_addr = (u_int32_t)
363 (rxbufdma + (i % nrbuf) * pktbufsz);
364 qr->rb_rxd[i].xd_flags = (i < nrbuf)
365 ? QEC_XD_OWN | (pktbufsz & QEC_XD_LENGTH)
366 : 0;
367 }
368
369 qr->rb_tdhead = qr->rb_tdtail = 0;
370 qr->rb_td_nbusy = 0;
371 qr->rb_rdtail = 0;
372 }
373