atapi_wdc.c revision 1.21 1 1.21 bouyer /* $NetBSD: atapi_wdc.c,v 1.21 1999/04/08 11:29:01 bouyer Exp $ */
2 1.2 bouyer
3 1.2 bouyer /*
4 1.2 bouyer * Copyright (c) 1998 Manuel Bouyer.
5 1.2 bouyer *
6 1.2 bouyer * Redistribution and use in source and binary forms, with or without
7 1.2 bouyer * modification, are permitted provided that the following conditions
8 1.2 bouyer * are met:
9 1.2 bouyer * 1. Redistributions of source code must retain the above copyright
10 1.2 bouyer * notice, this list of conditions and the following disclaimer.
11 1.2 bouyer * 2. Redistributions in binary form must reproduce the above copyright
12 1.2 bouyer * notice, this list of conditions and the following disclaimer in the
13 1.2 bouyer * documentation and/or other materials provided with the distribution.
14 1.2 bouyer * 3. All advertising materials mentioning features or use of this software
15 1.2 bouyer * must display the following acknowledgement:
16 1.2 bouyer * This product includes software developed by the University of
17 1.2 bouyer * California, Berkeley and its contributors.
18 1.2 bouyer * 4. Neither the name of the University nor the names of its contributors
19 1.2 bouyer * may be used to endorse or promote products derived from this software
20 1.2 bouyer * without specific prior written permission.
21 1.2 bouyer *
22 1.2 bouyer * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23 1.2 bouyer * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 1.2 bouyer * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 1.2 bouyer * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26 1.2 bouyer * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27 1.2 bouyer * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28 1.2 bouyer * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29 1.2 bouyer * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30 1.2 bouyer * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31 1.2 bouyer * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32 1.2 bouyer * SUCH DAMAGE.
33 1.2 bouyer *
34 1.2 bouyer */
35 1.2 bouyer
36 1.18 hubertf #ifndef WDCDEBUG
37 1.2 bouyer #define WDCDEBUG
38 1.18 hubertf #endif /* WDCDEBUG */
39 1.2 bouyer
40 1.2 bouyer #include <sys/param.h>
41 1.2 bouyer #include <sys/systm.h>
42 1.2 bouyer #include <sys/kernel.h>
43 1.2 bouyer #include <sys/file.h>
44 1.2 bouyer #include <sys/stat.h>
45 1.2 bouyer #include <sys/buf.h>
46 1.2 bouyer #include <sys/malloc.h>
47 1.2 bouyer #include <sys/device.h>
48 1.2 bouyer #include <sys/syslog.h>
49 1.2 bouyer #include <sys/proc.h>
50 1.2 bouyer
51 1.2 bouyer #include <vm/vm.h>
52 1.2 bouyer
53 1.2 bouyer #include <machine/intr.h>
54 1.2 bouyer #include <machine/bus.h>
55 1.2 bouyer
56 1.2 bouyer #ifndef __BUS_SPACE_HAS_STREAM_METHODS
57 1.2 bouyer #define bus_space_write_multi_stream_2 bus_space_write_multi_2
58 1.2 bouyer #define bus_space_write_multi_stream_4 bus_space_write_multi_4
59 1.2 bouyer #define bus_space_read_multi_stream_2 bus_space_read_multi_2
60 1.2 bouyer #define bus_space_read_multi_stream_4 bus_space_read_multi_4
61 1.2 bouyer #endif /* __BUS_SPACE_HAS_STREAM_METHODS */
62 1.2 bouyer
63 1.2 bouyer #include <dev/ata/atareg.h>
64 1.2 bouyer #include <dev/ata/atavar.h>
65 1.2 bouyer #include <dev/ic/wdcreg.h>
66 1.2 bouyer #include <dev/ic/wdcvar.h>
67 1.2 bouyer #include <dev/scsipi/scsipi_all.h>
68 1.2 bouyer #include <dev/scsipi/scsipiconf.h>
69 1.2 bouyer #include <dev/scsipi/atapiconf.h>
70 1.2 bouyer
71 1.2 bouyer #define DEBUG_INTR 0x01
72 1.2 bouyer #define DEBUG_XFERS 0x02
73 1.2 bouyer #define DEBUG_STATUS 0x04
74 1.2 bouyer #define DEBUG_FUNCS 0x08
75 1.2 bouyer #define DEBUG_PROBE 0x10
76 1.2 bouyer #ifdef WDCDEBUG
77 1.3 bouyer int wdcdebug_atapi_mask = 0;
78 1.2 bouyer #define WDCDEBUG_PRINT(args, level) \
79 1.2 bouyer if (wdcdebug_atapi_mask & (level)) \
80 1.2 bouyer printf args
81 1.2 bouyer #else
82 1.2 bouyer #define WDCDEBUG_PRINT(args, level)
83 1.2 bouyer #endif
84 1.2 bouyer
85 1.2 bouyer #define ATAPI_DELAY 10 /* 10 ms, this is used only before sending a cmd */
86 1.2 bouyer
87 1.2 bouyer void wdc_atapi_minphys __P((struct buf *bp));
88 1.2 bouyer void wdc_atapi_start __P((struct channel_softc *,struct wdc_xfer *));
89 1.20 bouyer int wdc_atapi_intr __P((struct channel_softc *, struct wdc_xfer *, int));
90 1.20 bouyer int wdc_atapi_ctrl __P((struct channel_softc *, struct wdc_xfer *, int));
91 1.2 bouyer void wdc_atapi_done __P((struct channel_softc *, struct wdc_xfer *));
92 1.2 bouyer void wdc_atapi_reset __P((struct channel_softc *, struct wdc_xfer *));
93 1.2 bouyer int wdc_atapi_send_cmd __P((struct scsipi_xfer *sc_xfer));
94 1.2 bouyer
95 1.2 bouyer #define MAX_SIZE MAXPHYS
96 1.2 bouyer
97 1.2 bouyer void
98 1.2 bouyer wdc_atapibus_attach(chp)
99 1.2 bouyer struct channel_softc *chp;
100 1.2 bouyer {
101 1.2 bouyer struct wdc_softc *wdc = chp->wdc;
102 1.2 bouyer int channel = chp->channel;
103 1.2 bouyer struct ata_atapi_attach aa_link;
104 1.2 bouyer
105 1.9 thorpej /*
106 1.9 thorpej * Fill in the adapter.
107 1.9 thorpej */
108 1.9 thorpej wdc->sc_atapi_adapter.scsipi_cmd = wdc_atapi_send_cmd;
109 1.9 thorpej wdc->sc_atapi_adapter.scsipi_minphys = wdc_atapi_minphys;
110 1.9 thorpej
111 1.2 bouyer memset(&aa_link, 0, sizeof(struct ata_atapi_attach));
112 1.2 bouyer aa_link.aa_type = T_ATAPI;
113 1.2 bouyer aa_link.aa_channel = channel;
114 1.2 bouyer aa_link.aa_openings = 1;
115 1.2 bouyer aa_link.aa_drv_data = chp->ch_drive; /* pass the whole array */
116 1.9 thorpej aa_link.aa_bus_private = &wdc->sc_atapi_adapter;
117 1.2 bouyer (void)config_found(&wdc->sc_dev, (void *)&aa_link, atapi_print);
118 1.2 bouyer }
119 1.2 bouyer
120 1.2 bouyer void
121 1.2 bouyer wdc_atapi_minphys (struct buf *bp)
122 1.2 bouyer {
123 1.2 bouyer if(bp->b_bcount > MAX_SIZE)
124 1.2 bouyer bp->b_bcount = MAX_SIZE;
125 1.2 bouyer minphys(bp);
126 1.2 bouyer }
127 1.2 bouyer
128 1.2 bouyer int
129 1.2 bouyer wdc_atapi_get_params(ab_link, drive, flags, id)
130 1.2 bouyer struct scsipi_link *ab_link;
131 1.2 bouyer u_int8_t drive;
132 1.2 bouyer int flags;
133 1.2 bouyer struct ataparams *id;
134 1.2 bouyer {
135 1.2 bouyer struct wdc_softc *wdc = (void*)ab_link->adapter_softc;
136 1.2 bouyer struct channel_softc *chp =
137 1.10 drochner wdc->channels[ab_link->scsipi_atapi.channel];
138 1.2 bouyer struct wdc_command wdc_c;
139 1.2 bouyer
140 1.2 bouyer /* if no ATAPI device detected at wdc attach time, skip */
141 1.2 bouyer /*
142 1.2 bouyer * XXX this will break scsireprobe if this is of any interest for
143 1.2 bouyer * ATAPI devices one day.
144 1.2 bouyer */
145 1.2 bouyer if ((chp->ch_drive[drive].drive_flags & DRIVE_ATAPI) == 0) {
146 1.2 bouyer WDCDEBUG_PRINT(("wdc_atapi_get_params: drive %d not present\n",
147 1.2 bouyer drive), DEBUG_PROBE);
148 1.2 bouyer return -1;
149 1.2 bouyer }
150 1.2 bouyer memset(&wdc_c, 0, sizeof(struct wdc_command));
151 1.2 bouyer wdc_c.r_command = ATAPI_SOFT_RESET;
152 1.2 bouyer wdc_c.r_st_bmask = 0;
153 1.2 bouyer wdc_c.r_st_pmask = 0;
154 1.2 bouyer wdc_c.flags = AT_POLL;
155 1.2 bouyer wdc_c.timeout = WDC_RESET_WAIT;
156 1.2 bouyer if (wdc_exec_command(&chp->ch_drive[drive], &wdc_c) != WDC_COMPLETE) {
157 1.2 bouyer printf("wdc_atapi_get_params: ATAPI_SOFT_RESET failed for"
158 1.2 bouyer " drive %s:%d:%d: driver failed\n",
159 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, drive);
160 1.2 bouyer panic("wdc_atapi_get_params");
161 1.2 bouyer }
162 1.2 bouyer if (wdc_c.flags & (AT_ERROR | AT_TIMEOU | AT_DF)) {
163 1.2 bouyer WDCDEBUG_PRINT(("wdc_atapi_get_params: ATAPI_SOFT_RESET "
164 1.2 bouyer "failed for drive %s:%d:%d: error 0x%x\n",
165 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, drive,
166 1.2 bouyer wdc_c.r_error), DEBUG_PROBE);
167 1.2 bouyer return -1;
168 1.2 bouyer }
169 1.2 bouyer chp->ch_drive[drive].state = 0;
170 1.2 bouyer
171 1.2 bouyer bus_space_read_1(chp->cmd_iot, chp->cmd_ioh, wd_status);
172 1.2 bouyer
173 1.2 bouyer /* Some ATAPI devices need a bit more time after software reset. */
174 1.2 bouyer delay(5000);
175 1.2 bouyer if (ata_get_params(&chp->ch_drive[drive], AT_POLL, id) != 0) {
176 1.2 bouyer WDCDEBUG_PRINT(("wdc_atapi_get_params: ATAPI_IDENTIFY_DEVICE "
177 1.2 bouyer "failed for drive %s:%d:%d: error 0x%x\n",
178 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, drive,
179 1.2 bouyer wdc_c.r_error), DEBUG_PROBE);
180 1.2 bouyer return -1;
181 1.2 bouyer }
182 1.2 bouyer return COMPLETE;
183 1.2 bouyer }
184 1.2 bouyer
185 1.2 bouyer int
186 1.2 bouyer wdc_atapi_send_cmd(sc_xfer)
187 1.2 bouyer struct scsipi_xfer *sc_xfer;
188 1.2 bouyer {
189 1.12 bouyer struct wdc_softc *wdc = (void*)sc_xfer->sc_link->adapter_softc;
190 1.2 bouyer struct wdc_xfer *xfer;
191 1.2 bouyer int flags = sc_xfer->flags;
192 1.2 bouyer int channel = sc_xfer->sc_link->scsipi_atapi.channel;
193 1.2 bouyer int drive = sc_xfer->sc_link->scsipi_atapi.drive;
194 1.2 bouyer int s, ret;
195 1.2 bouyer
196 1.5 bouyer WDCDEBUG_PRINT(("wdc_atapi_send_cmd %s:%d:%d\n",
197 1.5 bouyer wdc->sc_dev.dv_xname, channel, drive), DEBUG_XFERS);
198 1.2 bouyer
199 1.2 bouyer xfer = wdc_get_xfer(flags & SCSI_NOSLEEP ? WDC_NOSLEEP : WDC_CANSLEEP);
200 1.2 bouyer if (xfer == NULL) {
201 1.2 bouyer return TRY_AGAIN_LATER;
202 1.2 bouyer }
203 1.2 bouyer if (sc_xfer->flags & SCSI_POLL)
204 1.2 bouyer xfer->c_flags |= C_POLL;
205 1.2 bouyer xfer->drive = drive;
206 1.2 bouyer xfer->c_flags |= C_ATAPI;
207 1.2 bouyer xfer->cmd = sc_xfer;
208 1.2 bouyer xfer->databuf = sc_xfer->data;
209 1.2 bouyer xfer->c_bcount = sc_xfer->datalen;
210 1.2 bouyer xfer->c_start = wdc_atapi_start;
211 1.2 bouyer xfer->c_intr = wdc_atapi_intr;
212 1.2 bouyer s = splbio();
213 1.10 drochner wdc_exec_xfer(wdc->channels[channel], xfer);
214 1.2 bouyer #ifdef DIAGNOSTIC
215 1.2 bouyer if ((sc_xfer->flags & SCSI_POLL) != 0 &&
216 1.2 bouyer (sc_xfer->flags & ITSDONE) == 0)
217 1.2 bouyer panic("wdc_atapi_send_cmd: polled command not done");
218 1.2 bouyer #endif
219 1.2 bouyer ret = (sc_xfer->flags & ITSDONE) ? COMPLETE : SUCCESSFULLY_QUEUED;
220 1.2 bouyer splx(s);
221 1.2 bouyer return ret;
222 1.2 bouyer }
223 1.2 bouyer
224 1.2 bouyer void
225 1.2 bouyer wdc_atapi_start(chp, xfer)
226 1.2 bouyer struct channel_softc *chp;
227 1.2 bouyer struct wdc_xfer *xfer;
228 1.2 bouyer {
229 1.2 bouyer struct scsipi_xfer *sc_xfer = xfer->cmd;
230 1.2 bouyer struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
231 1.2 bouyer
232 1.5 bouyer WDCDEBUG_PRINT(("wdc_atapi_start %s:%d:%d, scsi flags 0x%x \n",
233 1.5 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, drvp->drive,
234 1.5 bouyer sc_xfer->flags), DEBUG_XFERS);
235 1.19 bouyer /* Adjust C_DMA, it may have changed if we are requesting sense */
236 1.19 bouyer if ((drvp->drive_flags & (DRIVE_DMA | DRIVE_UDMA)) &&
237 1.19 bouyer (sc_xfer->datalen > 0 || (xfer->c_flags & C_SENSE)))
238 1.19 bouyer xfer->c_flags |= C_DMA;
239 1.19 bouyer else
240 1.19 bouyer xfer->c_flags &= ~C_DMA;
241 1.2 bouyer /* Do control operations specially. */
242 1.2 bouyer if (drvp->state < READY) {
243 1.2 bouyer if (drvp->state != PIOMODE) {
244 1.2 bouyer printf("%s:%d:%d: bad state %d in wdc_atapi_start\n",
245 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel,
246 1.2 bouyer xfer->drive, drvp->state);
247 1.2 bouyer panic("wdc_atapi_start: bad state");
248 1.2 bouyer }
249 1.20 bouyer wdc_atapi_ctrl(chp, xfer, 0);
250 1.2 bouyer return;
251 1.2 bouyer }
252 1.2 bouyer bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, wd_sdh,
253 1.2 bouyer WDSD_IBM | (xfer->drive << 4));
254 1.2 bouyer if (wait_for_unbusy(chp, ATAPI_DELAY) < 0) {
255 1.2 bouyer printf("wdc_atapi_start: not ready, st = %02x\n",
256 1.2 bouyer chp->ch_status);
257 1.3 bouyer sc_xfer->error = XS_TIMEOUT;
258 1.2 bouyer wdc_atapi_reset(chp, xfer);
259 1.2 bouyer return;
260 1.2 bouyer }
261 1.2 bouyer
262 1.2 bouyer /*
263 1.2 bouyer * Even with WDCS_ERR, the device should accept a command packet
264 1.2 bouyer * Limit length to what can be stuffed into the cylinder register
265 1.2 bouyer * (16 bits). Some CD-ROMs seem to interpret '0' as 65536,
266 1.2 bouyer * but not all devices do that and it's not obvious from the
267 1.2 bouyer * ATAPI spec that that behaviour should be expected. If more
268 1.2 bouyer * data is necessary, multiple data transfer phases will be done.
269 1.2 bouyer */
270 1.5 bouyer
271 1.2 bouyer wdccommand(chp, xfer->drive, ATAPI_PKT_CMD,
272 1.2 bouyer sc_xfer->datalen <= 0xffff ? sc_xfer->datalen : 0xffff,
273 1.2 bouyer 0, 0, 0,
274 1.2 bouyer (xfer->c_flags & C_DMA) ? ATAPI_PKT_CMD_FTRE_DMA : 0);
275 1.2 bouyer
276 1.2 bouyer /*
277 1.2 bouyer * If there is no interrupt for CMD input, busy-wait for it (done in
278 1.2 bouyer * the interrupt routine. If it is a polled command, call the interrupt
279 1.2 bouyer * routine until command is done.
280 1.2 bouyer */
281 1.21 bouyer if ((sc_xfer->sc_link->scsipi_atapi.cap & ATAPI_CFG_DRQ_MASK) !=
282 1.21 bouyer ATAPI_CFG_IRQ_DRQ || (sc_xfer->flags & SCSI_POLL)) {
283 1.2 bouyer /* Wait for at last 400ns for status bit to be valid */
284 1.20 bouyer DELAY(1);
285 1.20 bouyer wdc_atapi_intr(chp, xfer, 0);
286 1.21 bouyer } else {
287 1.21 bouyer chp->ch_flags |= WDCF_IRQ_WAIT;
288 1.21 bouyer timeout(wdctimeout, chp, hz);
289 1.2 bouyer }
290 1.2 bouyer if (sc_xfer->flags & SCSI_POLL) {
291 1.2 bouyer while ((sc_xfer->flags & ITSDONE) == 0) {
292 1.2 bouyer /* Wait for at last 400ns for status bit to be valid */
293 1.20 bouyer DELAY(1);
294 1.20 bouyer wdc_atapi_intr(chp, xfer, 0);
295 1.2 bouyer }
296 1.2 bouyer }
297 1.2 bouyer }
298 1.2 bouyer
299 1.2 bouyer int
300 1.20 bouyer wdc_atapi_intr(chp, xfer, irq)
301 1.2 bouyer struct channel_softc *chp;
302 1.2 bouyer struct wdc_xfer *xfer;
303 1.20 bouyer int irq;
304 1.2 bouyer {
305 1.2 bouyer struct scsipi_xfer *sc_xfer = xfer->cmd;
306 1.2 bouyer struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
307 1.2 bouyer int len, phase, i, retries=0;
308 1.2 bouyer int ire, dma_err = 0;
309 1.2 bouyer int dma_flags = 0;
310 1.8 bouyer struct scsipi_generic _cmd_reqsense;
311 1.8 bouyer struct scsipi_sense *cmd_reqsense =
312 1.8 bouyer (struct scsipi_sense *)&_cmd_reqsense;
313 1.8 bouyer void *cmd;
314 1.2 bouyer
315 1.5 bouyer WDCDEBUG_PRINT(("wdc_atapi_intr %s:%d:%d\n",
316 1.5 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, drvp->drive), DEBUG_INTR);
317 1.2 bouyer
318 1.2 bouyer /* Is it not a transfer, but a control operation? */
319 1.2 bouyer if (drvp->state < READY) {
320 1.2 bouyer printf("%s:%d:%d: bad state %d in wdc_atapi_intr\n",
321 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
322 1.2 bouyer drvp->state);
323 1.2 bouyer panic("wdc_atapi_intr: bad state\n");
324 1.2 bouyer }
325 1.2 bouyer /* Ack interrupt done in wait_for_unbusy */
326 1.2 bouyer bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, wd_sdh,
327 1.2 bouyer WDSD_IBM | (xfer->drive << 4));
328 1.19 bouyer if (wait_for_unbusy(chp,
329 1.20 bouyer (irq == 0) ? sc_xfer->timeout : 0) != 0) {
330 1.20 bouyer if (irq && (xfer->c_flags & C_TIMEOU) == 0)
331 1.19 bouyer return 0; /* IRQ was not for us */
332 1.16 bouyer printf("%s:%d:%d: device timeout, c_bcount=%d, c_skip=%d\n",
333 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
334 1.2 bouyer xfer->c_bcount, xfer->c_skip);
335 1.11 bouyer if (xfer->c_flags & C_DMA)
336 1.19 bouyer drvp->n_dmaerrs++;
337 1.3 bouyer sc_xfer->error = XS_TIMEOUT;
338 1.2 bouyer wdc_atapi_reset(chp, xfer);
339 1.2 bouyer return 1;
340 1.2 bouyer }
341 1.19 bouyer /* If we missed an IRQ and were using DMA, flag it as a DMA error */
342 1.19 bouyer if ((xfer->c_flags & C_TIMEOU) && (xfer->c_flags & C_DMA))
343 1.19 bouyer drvp->n_dmaerrs++;
344 1.8 bouyer /*
345 1.8 bouyer * if the request sense command was aborted, report the short sense
346 1.8 bouyer * previously recorded, else continue normal processing
347 1.8 bouyer */
348 1.8 bouyer
349 1.8 bouyer if ((xfer->c_flags & C_SENSE) != 0 &&
350 1.8 bouyer (chp->ch_status & WDCS_ERR) != 0 &&
351 1.2 bouyer (chp->ch_error & WDCE_ABRT) != 0) {
352 1.8 bouyer WDCDEBUG_PRINT(("wdc_atapi_intr: request_sense aborted, "
353 1.8 bouyer "calling wdc_atapi_done(), sense 0x%x\n",
354 1.8 bouyer sc_xfer->sense.atapi_sense), DEBUG_INTR);
355 1.2 bouyer wdc_atapi_done(chp, xfer);
356 1.2 bouyer return 1;
357 1.2 bouyer }
358 1.2 bouyer
359 1.2 bouyer if (xfer->c_flags & C_DMA) {
360 1.19 bouyer dma_flags = ((sc_xfer->flags & SCSI_DATA_IN) ||
361 1.19 bouyer (xfer->c_flags & C_SENSE)) ? WDC_DMA_READ : 0;
362 1.2 bouyer dma_flags |= sc_xfer->flags & SCSI_POLL ? WDC_DMA_POLL : 0;
363 1.2 bouyer }
364 1.2 bouyer again:
365 1.2 bouyer len = bus_space_read_1(chp->cmd_iot, chp->cmd_ioh, wd_cyl_lo) +
366 1.2 bouyer 256 * bus_space_read_1(chp->cmd_iot, chp->cmd_ioh, wd_cyl_hi);
367 1.2 bouyer ire = bus_space_read_1(chp->cmd_iot, chp->cmd_ioh, wd_ireason);
368 1.2 bouyer phase = (ire & (WDCI_CMD | WDCI_IN)) | (chp->ch_status & WDCS_DRQ);
369 1.2 bouyer WDCDEBUG_PRINT(("wdc_atapi_intr: c_bcount %d len %d st 0x%x err 0x%x "
370 1.2 bouyer "ire 0x%x :", xfer->c_bcount,
371 1.2 bouyer len, chp->ch_status, chp->ch_error, ire), DEBUG_INTR);
372 1.2 bouyer
373 1.2 bouyer switch (phase) {
374 1.2 bouyer case PHASE_CMDOUT:
375 1.8 bouyer if (xfer->c_flags & C_SENSE) {
376 1.8 bouyer memset(cmd_reqsense, 0, sizeof(struct scsipi_generic));
377 1.8 bouyer cmd_reqsense->opcode = REQUEST_SENSE;
378 1.8 bouyer cmd_reqsense->length = xfer->c_bcount;
379 1.8 bouyer cmd = cmd_reqsense;
380 1.8 bouyer } else {
381 1.8 bouyer cmd = sc_xfer->cmd;
382 1.8 bouyer }
383 1.2 bouyer WDCDEBUG_PRINT(("PHASE_CMDOUT\n"), DEBUG_INTR);
384 1.2 bouyer /* Init the DMA channel if necessary */
385 1.2 bouyer if (xfer->c_flags & C_DMA) {
386 1.2 bouyer if ((*chp->wdc->dma_init)(chp->wdc->dma_arg,
387 1.2 bouyer chp->channel, xfer->drive,
388 1.8 bouyer xfer->databuf, xfer->c_bcount, dma_flags) != 0) {
389 1.2 bouyer sc_xfer->error = XS_DRIVER_STUFFUP;
390 1.2 bouyer break;
391 1.2 bouyer }
392 1.2 bouyer }
393 1.2 bouyer /* send packet command */
394 1.2 bouyer /* Commands are 12 or 16 bytes long. It's 32-bit aligned */
395 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM)) {
396 1.2 bouyer if (drvp->drive_flags & DRIVE_CAP32) {
397 1.2 bouyer bus_space_write_multi_4(chp->data32iot,
398 1.2 bouyer chp->data32ioh, 0,
399 1.8 bouyer (u_int32_t *)cmd,
400 1.2 bouyer sc_xfer->cmdlen >> 2);
401 1.2 bouyer } else {
402 1.2 bouyer bus_space_write_multi_2(chp->cmd_iot,
403 1.2 bouyer chp->cmd_ioh, wd_data,
404 1.8 bouyer (u_int16_t *)cmd,
405 1.2 bouyer sc_xfer->cmdlen >> 1);
406 1.2 bouyer }
407 1.2 bouyer } else {
408 1.2 bouyer if (drvp->drive_flags & DRIVE_CAP32) {
409 1.2 bouyer bus_space_write_multi_stream_4(chp->data32iot,
410 1.2 bouyer chp->data32ioh, 0,
411 1.8 bouyer (u_int32_t *)cmd,
412 1.2 bouyer sc_xfer->cmdlen >> 2);
413 1.2 bouyer } else {
414 1.2 bouyer bus_space_write_multi_stream_2(chp->cmd_iot,
415 1.2 bouyer chp->cmd_ioh, wd_data,
416 1.8 bouyer (u_int16_t *)cmd,
417 1.2 bouyer sc_xfer->cmdlen >> 1);
418 1.2 bouyer }
419 1.2 bouyer }
420 1.2 bouyer /* Start the DMA channel if necessary */
421 1.2 bouyer if (xfer->c_flags & C_DMA) {
422 1.2 bouyer (*chp->wdc->dma_start)(chp->wdc->dma_arg,
423 1.2 bouyer chp->channel, xfer->drive, dma_flags);
424 1.2 bouyer }
425 1.2 bouyer
426 1.2 bouyer if ((sc_xfer->flags & SCSI_POLL) == 0) {
427 1.2 bouyer chp->ch_flags |= WDCF_IRQ_WAIT;
428 1.2 bouyer timeout(wdctimeout, chp, sc_xfer->timeout * hz / 1000);
429 1.2 bouyer }
430 1.2 bouyer return 1;
431 1.2 bouyer
432 1.2 bouyer case PHASE_DATAOUT:
433 1.2 bouyer /* write data */
434 1.2 bouyer WDCDEBUG_PRINT(("PHASE_DATAOUT\n"), DEBUG_INTR);
435 1.2 bouyer if ((sc_xfer->flags & SCSI_DATA_OUT) == 0 ||
436 1.2 bouyer (xfer->c_flags & C_DMA) != 0) {
437 1.15 bouyer printf("wdc_atapi_intr: bad data phase DATAOUT\n");
438 1.2 bouyer if (xfer->c_flags & C_DMA) {
439 1.11 bouyer (*chp->wdc->dma_finish)(chp->wdc->dma_arg,
440 1.11 bouyer chp->channel, xfer->drive, dma_flags);
441 1.11 bouyer drvp->n_dmaerrs++;
442 1.2 bouyer }
443 1.3 bouyer sc_xfer->error = XS_TIMEOUT;
444 1.2 bouyer wdc_atapi_reset(chp, xfer);
445 1.2 bouyer return 1;
446 1.2 bouyer }
447 1.2 bouyer if (xfer->c_bcount < len) {
448 1.2 bouyer printf("wdc_atapi_intr: warning: write only "
449 1.2 bouyer "%d of %d requested bytes\n", xfer->c_bcount, len);
450 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM)) {
451 1.2 bouyer bus_space_write_multi_2(chp->cmd_iot,
452 1.2 bouyer chp->cmd_ioh, wd_data,
453 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
454 1.14 thorpej xfer->c_skip),
455 1.2 bouyer xfer->c_bcount >> 1);
456 1.2 bouyer } else {
457 1.2 bouyer bus_space_write_multi_stream_2(chp->cmd_iot,
458 1.2 bouyer chp->cmd_ioh, wd_data,
459 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
460 1.14 thorpej xfer->c_skip),
461 1.2 bouyer xfer->c_bcount >> 1);
462 1.2 bouyer }
463 1.2 bouyer for (i = xfer->c_bcount; i < len; i += 2)
464 1.2 bouyer bus_space_write_2(chp->cmd_iot, chp->cmd_ioh,
465 1.2 bouyer wd_data, 0);
466 1.2 bouyer xfer->c_skip += xfer->c_bcount;
467 1.2 bouyer xfer->c_bcount = 0;
468 1.2 bouyer } else {
469 1.2 bouyer if (drvp->drive_flags & DRIVE_CAP32) {
470 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM))
471 1.2 bouyer bus_space_write_multi_4(chp->data32iot,
472 1.2 bouyer chp->data32ioh, 0,
473 1.14 thorpej (u_int32_t *)((char *)xfer->databuf +
474 1.14 thorpej xfer->c_skip),
475 1.13 augustss len >> 2);
476 1.2 bouyer else
477 1.12 bouyer bus_space_write_multi_stream_4(chp->data32iot,
478 1.12 bouyer chp->data32ioh, wd_data,
479 1.14 thorpej (u_int32_t *)((char *)xfer->databuf +
480 1.14 thorpej xfer->c_skip),
481 1.13 augustss len >> 2);
482 1.2 bouyer
483 1.2 bouyer xfer->c_skip += len & 0xfffffffc;
484 1.2 bouyer xfer->c_bcount -= len & 0xfffffffc;
485 1.2 bouyer len = len & 0x03;
486 1.2 bouyer }
487 1.2 bouyer if (len > 0) {
488 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM))
489 1.2 bouyer bus_space_write_multi_2(chp->cmd_iot,
490 1.2 bouyer chp->cmd_ioh, wd_data,
491 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
492 1.14 thorpej xfer->c_skip),
493 1.13 augustss len >> 1);
494 1.2 bouyer else
495 1.2 bouyer bus_space_write_multi_stream_2(chp->cmd_iot,
496 1.2 bouyer chp->cmd_ioh, wd_data,
497 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
498 1.14 thorpej xfer->c_skip),
499 1.13 augustss len >> 1);
500 1.2 bouyer xfer->c_skip += len;
501 1.2 bouyer xfer->c_bcount -= len;
502 1.2 bouyer }
503 1.2 bouyer }
504 1.2 bouyer if ((sc_xfer->flags & SCSI_POLL) == 0) {
505 1.2 bouyer chp->ch_flags |= WDCF_IRQ_WAIT;
506 1.2 bouyer timeout(wdctimeout, chp, sc_xfer->timeout * hz / 1000);
507 1.2 bouyer }
508 1.2 bouyer return 1;
509 1.2 bouyer
510 1.2 bouyer case PHASE_DATAIN:
511 1.2 bouyer /* Read data */
512 1.2 bouyer WDCDEBUG_PRINT(("PHASE_DATAIN\n"), DEBUG_INTR);
513 1.8 bouyer if (((sc_xfer->flags & SCSI_DATA_IN) == 0 &&
514 1.8 bouyer (xfer->c_flags & C_SENSE) == 0) ||
515 1.2 bouyer (xfer->c_flags & C_DMA) != 0) {
516 1.15 bouyer printf("wdc_atapi_intr: bad data phase DATAIN\n");
517 1.2 bouyer if (xfer->c_flags & C_DMA) {
518 1.11 bouyer (*chp->wdc->dma_finish)(chp->wdc->dma_arg,
519 1.11 bouyer chp->channel, xfer->drive, dma_flags);
520 1.11 bouyer drvp->n_dmaerrs++;
521 1.2 bouyer }
522 1.3 bouyer sc_xfer->error = XS_TIMEOUT;
523 1.2 bouyer wdc_atapi_reset(chp, xfer);
524 1.2 bouyer return 1;
525 1.2 bouyer }
526 1.2 bouyer if (xfer->c_bcount < len) {
527 1.2 bouyer printf("wdc_atapi_intr: warning: reading only "
528 1.2 bouyer "%d of %d bytes\n", xfer->c_bcount, len);
529 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM)) {
530 1.2 bouyer bus_space_read_multi_2(chp->cmd_iot,
531 1.2 bouyer chp->cmd_ioh, wd_data,
532 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
533 1.14 thorpej xfer->c_skip),
534 1.13 augustss xfer->c_bcount >> 1);
535 1.2 bouyer } else {
536 1.2 bouyer bus_space_read_multi_stream_2(chp->cmd_iot,
537 1.2 bouyer chp->cmd_ioh, wd_data,
538 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
539 1.14 thorpej xfer->c_skip),
540 1.13 augustss xfer->c_bcount >> 1);
541 1.2 bouyer }
542 1.2 bouyer wdcbit_bucket(chp, len - xfer->c_bcount);
543 1.2 bouyer xfer->c_skip += xfer->c_bcount;
544 1.2 bouyer xfer->c_bcount = 0;
545 1.2 bouyer } else {
546 1.2 bouyer if (drvp->drive_flags & DRIVE_CAP32) {
547 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM))
548 1.2 bouyer bus_space_read_multi_4(chp->data32iot,
549 1.2 bouyer chp->data32ioh, 0,
550 1.14 thorpej (u_int32_t *)((char *)xfer->databuf +
551 1.14 thorpej xfer->c_skip),
552 1.13 augustss len >> 2);
553 1.2 bouyer else
554 1.12 bouyer bus_space_read_multi_stream_4(chp->data32iot,
555 1.12 bouyer chp->data32ioh, wd_data,
556 1.14 thorpej (u_int32_t *)((char *)xfer->databuf +
557 1.14 thorpej xfer->c_skip),
558 1.13 augustss len >> 2);
559 1.2 bouyer
560 1.2 bouyer xfer->c_skip += len & 0xfffffffc;
561 1.2 bouyer xfer->c_bcount -= len & 0xfffffffc;
562 1.2 bouyer len = len & 0x03;
563 1.2 bouyer }
564 1.2 bouyer if (len > 0) {
565 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM))
566 1.2 bouyer bus_space_read_multi_2(chp->cmd_iot,
567 1.2 bouyer chp->cmd_ioh, wd_data,
568 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
569 1.14 thorpej xfer->c_skip),
570 1.13 augustss len >> 1);
571 1.2 bouyer else
572 1.2 bouyer bus_space_read_multi_stream_2(chp->cmd_iot,
573 1.2 bouyer chp->cmd_ioh, wd_data,
574 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
575 1.14 thorpej xfer->c_skip),
576 1.13 augustss len >> 1);
577 1.2 bouyer xfer->c_skip += len;
578 1.2 bouyer xfer->c_bcount -=len;
579 1.2 bouyer }
580 1.2 bouyer }
581 1.2 bouyer if ((sc_xfer->flags & SCSI_POLL) == 0) {
582 1.2 bouyer chp->ch_flags |= WDCF_IRQ_WAIT;
583 1.2 bouyer timeout(wdctimeout, chp, sc_xfer->timeout * hz / 1000);
584 1.2 bouyer }
585 1.2 bouyer return 1;
586 1.2 bouyer
587 1.2 bouyer case PHASE_ABORTED:
588 1.2 bouyer case PHASE_COMPLETED:
589 1.2 bouyer WDCDEBUG_PRINT(("PHASE_COMPLETED\n"), DEBUG_INTR);
590 1.2 bouyer /* turn off DMA channel */
591 1.2 bouyer if (xfer->c_flags & C_DMA) {
592 1.2 bouyer dma_err = (*chp->wdc->dma_finish)(chp->wdc->dma_arg,
593 1.2 bouyer chp->channel, xfer->drive, dma_flags);
594 1.20 bouyer if (xfer->c_flags & C_SENSE)
595 1.20 bouyer xfer->c_bcount -=
596 1.20 bouyer sizeof(sc_xfer->sense.scsi_sense);
597 1.20 bouyer else
598 1.20 bouyer xfer->c_bcount -= sc_xfer->datalen;
599 1.2 bouyer }
600 1.8 bouyer if (xfer->c_flags & C_SENSE) {
601 1.8 bouyer if ((chp->ch_status & WDCS_ERR) || dma_err < 0) {
602 1.8 bouyer /*
603 1.8 bouyer * request sense failed ! it's not suppossed
604 1.8 bouyer * to be possible
605 1.8 bouyer */
606 1.17 bouyer if (dma_err < 0)
607 1.17 bouyer drvp->n_dmaerrs++;
608 1.17 bouyer sc_xfer->error = XS_RESET;
609 1.17 bouyer wdc_atapi_reset(chp, xfer);
610 1.17 bouyer return (1);
611 1.17 bouyer } else if (xfer->c_bcount <
612 1.17 bouyer sizeof(sc_xfer->sense.scsi_sense)) {
613 1.8 bouyer /* use the sense we just read */
614 1.8 bouyer sc_xfer->error = XS_SENSE;
615 1.17 bouyer } else {
616 1.17 bouyer /*
617 1.17 bouyer * command completed, but no data was read.
618 1.17 bouyer * use the short sense we saved previsouly.
619 1.17 bouyer */
620 1.17 bouyer sc_xfer->error = XS_SHORTSENSE;
621 1.8 bouyer }
622 1.8 bouyer } else {
623 1.8 bouyer if (chp->ch_status & WDCS_ERR) {
624 1.8 bouyer /* save the short sense */
625 1.8 bouyer sc_xfer->error = XS_SHORTSENSE;
626 1.8 bouyer sc_xfer->sense.atapi_sense = chp->ch_error;
627 1.12 bouyer if ((sc_xfer->sc_link->quirks &
628 1.12 bouyer ADEV_NOSENSE) == 0) {
629 1.12 bouyer /*
630 1.12 bouyer * let the driver issue a
631 1.12 bouyer * 'request sense'
632 1.12 bouyer */
633 1.12 bouyer xfer->databuf = &sc_xfer->sense;
634 1.12 bouyer xfer->c_bcount =
635 1.12 bouyer sizeof(sc_xfer->sense.scsi_sense);
636 1.12 bouyer xfer->c_flags |= C_SENSE;
637 1.12 bouyer wdc_atapi_start(chp, xfer);
638 1.12 bouyer return 1;
639 1.12 bouyer }
640 1.8 bouyer } else if (dma_err < 0) {
641 1.11 bouyer drvp->n_dmaerrs++;
642 1.16 bouyer sc_xfer->error = XS_RESET;
643 1.16 bouyer wdc_atapi_reset(chp, xfer);
644 1.16 bouyer return (1);
645 1.8 bouyer }
646 1.2 bouyer }
647 1.7 bouyer if (xfer->c_bcount != 0) {
648 1.7 bouyer WDCDEBUG_PRINT(("wdc_atapi_intr: bcount value is "
649 1.7 bouyer "%d after io\n", xfer->c_bcount), DEBUG_XFERS);
650 1.7 bouyer }
651 1.2 bouyer #ifdef DIAGNOSTIC
652 1.7 bouyer if (xfer->c_bcount < 0) {
653 1.2 bouyer printf("wdc_atapi_intr warning: bcount value "
654 1.2 bouyer "is %d after io\n", xfer->c_bcount);
655 1.2 bouyer }
656 1.2 bouyer #endif
657 1.2 bouyer break;
658 1.2 bouyer
659 1.2 bouyer default:
660 1.2 bouyer if (++retries<500) {
661 1.2 bouyer DELAY(100);
662 1.2 bouyer chp->ch_status = bus_space_read_1(chp->cmd_iot,
663 1.2 bouyer chp->cmd_ioh, wd_status);
664 1.2 bouyer chp->ch_error = bus_space_read_1(chp->cmd_iot,
665 1.2 bouyer chp->cmd_ioh, wd_error);
666 1.2 bouyer goto again;
667 1.2 bouyer }
668 1.2 bouyer printf("wdc_atapi_intr: unknown phase 0x%x\n", phase);
669 1.2 bouyer if (chp->ch_status & WDCS_ERR) {
670 1.8 bouyer sc_xfer->error = XS_SHORTSENSE;
671 1.2 bouyer sc_xfer->sense.atapi_sense = chp->ch_error;
672 1.2 bouyer } else {
673 1.16 bouyer sc_xfer->error = XS_RESET;
674 1.16 bouyer wdc_atapi_reset(chp, xfer);
675 1.16 bouyer return (1);
676 1.2 bouyer }
677 1.2 bouyer }
678 1.2 bouyer WDCDEBUG_PRINT(("wdc_atapi_intr: wdc_atapi_done() (end), error 0x%x "
679 1.2 bouyer "sense 0x%x\n", sc_xfer->error, sc_xfer->sense.atapi_sense),
680 1.2 bouyer DEBUG_INTR);
681 1.2 bouyer wdc_atapi_done(chp, xfer);
682 1.2 bouyer return (1);
683 1.2 bouyer }
684 1.2 bouyer
685 1.2 bouyer int
686 1.20 bouyer wdc_atapi_ctrl(chp, xfer, irq)
687 1.2 bouyer struct channel_softc *chp;
688 1.2 bouyer struct wdc_xfer *xfer;
689 1.20 bouyer int irq;
690 1.2 bouyer {
691 1.2 bouyer struct scsipi_xfer *sc_xfer = xfer->cmd;
692 1.2 bouyer struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
693 1.2 bouyer char *errstring = NULL;
694 1.20 bouyer int delay = (irq == 0) ? ATAPI_DELAY : 0;
695 1.2 bouyer
696 1.2 bouyer /* Ack interrupt done in wait_for_unbusy */
697 1.2 bouyer again:
698 1.5 bouyer WDCDEBUG_PRINT(("wdc_atapi_ctrl %s:%d:%d state %d\n",
699 1.5 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, drvp->drive, drvp->state),
700 1.4 bouyer DEBUG_INTR | DEBUG_FUNCS);
701 1.2 bouyer bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, wd_sdh,
702 1.2 bouyer WDSD_IBM | (xfer->drive << 4));
703 1.2 bouyer switch (drvp->state) {
704 1.2 bouyer case PIOMODE:
705 1.2 bouyer /* Don't try to set mode if controller can't be adjusted */
706 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_MODE) == 0)
707 1.2 bouyer goto ready;
708 1.6 bouyer /* Also don't try if the drive didn't report its mode */
709 1.6 bouyer if ((drvp->drive_flags & DRIVE_MODE) == 0)
710 1.6 bouyer goto ready;;
711 1.2 bouyer wdccommand(chp, drvp->drive, SET_FEATURES, 0, 0, 0,
712 1.2 bouyer 0x08 | drvp->PIO_mode, WDSF_SET_MODE);
713 1.2 bouyer drvp->state = PIOMODE_WAIT;
714 1.2 bouyer break;
715 1.2 bouyer case PIOMODE_WAIT:
716 1.2 bouyer errstring = "piomode";
717 1.19 bouyer if (wait_for_unbusy(chp, delay))
718 1.2 bouyer goto timeout;
719 1.2 bouyer if (chp->ch_status & WDCS_ERR)
720 1.2 bouyer goto error;
721 1.2 bouyer /* fall through */
722 1.2 bouyer
723 1.2 bouyer case DMAMODE:
724 1.2 bouyer if (drvp->drive_flags & DRIVE_UDMA) {
725 1.2 bouyer wdccommand(chp, drvp->drive, SET_FEATURES, 0, 0, 0,
726 1.2 bouyer 0x40 | drvp->UDMA_mode, WDSF_SET_MODE);
727 1.2 bouyer } else if (drvp->drive_flags & DRIVE_DMA) {
728 1.2 bouyer wdccommand(chp, drvp->drive, SET_FEATURES, 0, 0, 0,
729 1.2 bouyer 0x20 | drvp->DMA_mode, WDSF_SET_MODE);
730 1.2 bouyer } else {
731 1.2 bouyer goto ready;
732 1.2 bouyer }
733 1.2 bouyer drvp->state = DMAMODE_WAIT;
734 1.2 bouyer break;
735 1.2 bouyer case DMAMODE_WAIT:
736 1.2 bouyer errstring = "dmamode";
737 1.19 bouyer if (wait_for_unbusy(chp, delay))
738 1.2 bouyer goto timeout;
739 1.2 bouyer if (chp->ch_status & WDCS_ERR)
740 1.2 bouyer goto error;
741 1.2 bouyer /* fall through */
742 1.2 bouyer
743 1.2 bouyer case READY:
744 1.2 bouyer ready:
745 1.2 bouyer drvp->state = READY;
746 1.2 bouyer xfer->c_intr = wdc_atapi_intr;
747 1.2 bouyer wdc_atapi_start(chp, xfer);
748 1.2 bouyer return 1;
749 1.2 bouyer }
750 1.2 bouyer if ((sc_xfer->flags & SCSI_POLL) == 0) {
751 1.2 bouyer chp->ch_flags |= WDCF_IRQ_WAIT;
752 1.2 bouyer xfer->c_intr = wdc_atapi_ctrl;
753 1.2 bouyer timeout(wdctimeout, chp, sc_xfer->timeout * hz / 1000);
754 1.2 bouyer } else {
755 1.2 bouyer goto again;
756 1.2 bouyer }
757 1.2 bouyer return 1;
758 1.2 bouyer
759 1.2 bouyer timeout:
760 1.20 bouyer if (irq && (xfer->c_flags & C_TIMEOU) == 0) {
761 1.2 bouyer return 0; /* IRQ was not for us */
762 1.2 bouyer }
763 1.2 bouyer printf("%s:%d:%d: %s timed out\n",
764 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive, errstring);
765 1.3 bouyer sc_xfer->error = XS_TIMEOUT;
766 1.2 bouyer wdc_atapi_reset(chp, xfer);
767 1.2 bouyer return 1;
768 1.2 bouyer error:
769 1.2 bouyer printf("%s:%d:%d: %s ",
770 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
771 1.2 bouyer errstring);
772 1.3 bouyer printf("error (0x%x)\n", chp->ch_error);
773 1.8 bouyer sc_xfer->error = XS_SHORTSENSE;
774 1.2 bouyer sc_xfer->sense.atapi_sense = chp->ch_error;
775 1.3 bouyer wdc_atapi_reset(chp, xfer);
776 1.2 bouyer return 1;
777 1.2 bouyer }
778 1.2 bouyer
779 1.2 bouyer void
780 1.2 bouyer wdc_atapi_done(chp, xfer)
781 1.2 bouyer struct channel_softc *chp;
782 1.2 bouyer struct wdc_xfer *xfer;
783 1.2 bouyer {
784 1.2 bouyer struct scsipi_xfer *sc_xfer = xfer->cmd;
785 1.2 bouyer int need_done = xfer->c_flags & C_NEEDDONE;
786 1.11 bouyer struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
787 1.2 bouyer
788 1.5 bouyer WDCDEBUG_PRINT(("wdc_atapi_done %s:%d:%d: flags 0x%x\n",
789 1.5 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
790 1.5 bouyer (u_int)xfer->c_flags), DEBUG_XFERS);
791 1.2 bouyer sc_xfer->resid = xfer->c_bcount;
792 1.2 bouyer /* remove this command from xfer queue */
793 1.2 bouyer xfer->c_skip = 0;
794 1.2 bouyer wdc_free_xfer(chp, xfer);
795 1.2 bouyer sc_xfer->flags |= ITSDONE;
796 1.19 bouyer if (drvp->n_dmaerrs ||
797 1.19 bouyer (sc_xfer->error != XS_NOERROR && sc_xfer->error != XS_SENSE &&
798 1.19 bouyer sc_xfer->error != XS_SHORTSENSE)) {
799 1.11 bouyer drvp->n_dmaerrs = 0;
800 1.11 bouyer wdc_downgrade_mode(drvp);
801 1.11 bouyer }
802 1.11 bouyer
803 1.2 bouyer if (need_done) {
804 1.4 bouyer WDCDEBUG_PRINT(("wdc_atapi_done: scsipi_done\n"), DEBUG_XFERS);
805 1.2 bouyer scsipi_done(sc_xfer);
806 1.2 bouyer }
807 1.2 bouyer WDCDEBUG_PRINT(("wdcstart from wdc_atapi_done, flags 0x%x\n",
808 1.4 bouyer chp->ch_flags), DEBUG_XFERS);
809 1.10 drochner wdcstart(chp);
810 1.2 bouyer }
811 1.2 bouyer
812 1.2 bouyer void
813 1.2 bouyer wdc_atapi_reset(chp, xfer)
814 1.2 bouyer struct channel_softc *chp;
815 1.2 bouyer struct wdc_xfer *xfer;
816 1.2 bouyer {
817 1.2 bouyer struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
818 1.2 bouyer struct scsipi_xfer *sc_xfer = xfer->cmd;
819 1.2 bouyer
820 1.2 bouyer wdccommandshort(chp, xfer->drive, ATAPI_SOFT_RESET);
821 1.2 bouyer drvp->state = 0;
822 1.2 bouyer if (wait_for_unbusy(chp, WDC_RESET_WAIT) != 0) {
823 1.2 bouyer printf("%s:%d:%d: reset failed\n",
824 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel,
825 1.2 bouyer xfer->drive);
826 1.2 bouyer sc_xfer->error = XS_SELTIMEOUT;
827 1.2 bouyer }
828 1.2 bouyer wdc_atapi_done(chp, xfer);
829 1.2 bouyer return;
830 1.2 bouyer }
831