atapi_wdc.c revision 1.24 1 1.24 bouyer /* $NetBSD: atapi_wdc.c,v 1.24 1999/08/06 12:00:26 bouyer Exp $ */
2 1.2 bouyer
3 1.2 bouyer /*
4 1.2 bouyer * Copyright (c) 1998 Manuel Bouyer.
5 1.2 bouyer *
6 1.2 bouyer * Redistribution and use in source and binary forms, with or without
7 1.2 bouyer * modification, are permitted provided that the following conditions
8 1.2 bouyer * are met:
9 1.2 bouyer * 1. Redistributions of source code must retain the above copyright
10 1.2 bouyer * notice, this list of conditions and the following disclaimer.
11 1.2 bouyer * 2. Redistributions in binary form must reproduce the above copyright
12 1.2 bouyer * notice, this list of conditions and the following disclaimer in the
13 1.2 bouyer * documentation and/or other materials provided with the distribution.
14 1.2 bouyer * 3. All advertising materials mentioning features or use of this software
15 1.2 bouyer * must display the following acknowledgement:
16 1.2 bouyer * This product includes software developed by the University of
17 1.2 bouyer * California, Berkeley and its contributors.
18 1.2 bouyer * 4. Neither the name of the University nor the names of its contributors
19 1.2 bouyer * may be used to endorse or promote products derived from this software
20 1.2 bouyer * without specific prior written permission.
21 1.2 bouyer *
22 1.2 bouyer * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23 1.2 bouyer * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 1.2 bouyer * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 1.2 bouyer * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26 1.2 bouyer * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27 1.2 bouyer * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28 1.2 bouyer * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29 1.2 bouyer * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30 1.2 bouyer * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31 1.2 bouyer * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32 1.2 bouyer * SUCH DAMAGE.
33 1.2 bouyer *
34 1.2 bouyer */
35 1.2 bouyer
36 1.18 hubertf #ifndef WDCDEBUG
37 1.2 bouyer #define WDCDEBUG
38 1.18 hubertf #endif /* WDCDEBUG */
39 1.2 bouyer
40 1.2 bouyer #include <sys/param.h>
41 1.2 bouyer #include <sys/systm.h>
42 1.2 bouyer #include <sys/kernel.h>
43 1.2 bouyer #include <sys/file.h>
44 1.2 bouyer #include <sys/stat.h>
45 1.2 bouyer #include <sys/buf.h>
46 1.2 bouyer #include <sys/malloc.h>
47 1.2 bouyer #include <sys/device.h>
48 1.2 bouyer #include <sys/syslog.h>
49 1.2 bouyer #include <sys/proc.h>
50 1.2 bouyer
51 1.2 bouyer #include <vm/vm.h>
52 1.2 bouyer
53 1.2 bouyer #include <machine/intr.h>
54 1.2 bouyer #include <machine/bus.h>
55 1.2 bouyer
56 1.2 bouyer #ifndef __BUS_SPACE_HAS_STREAM_METHODS
57 1.2 bouyer #define bus_space_write_multi_stream_2 bus_space_write_multi_2
58 1.2 bouyer #define bus_space_write_multi_stream_4 bus_space_write_multi_4
59 1.2 bouyer #define bus_space_read_multi_stream_2 bus_space_read_multi_2
60 1.2 bouyer #define bus_space_read_multi_stream_4 bus_space_read_multi_4
61 1.2 bouyer #endif /* __BUS_SPACE_HAS_STREAM_METHODS */
62 1.2 bouyer
63 1.2 bouyer #include <dev/ata/atareg.h>
64 1.2 bouyer #include <dev/ata/atavar.h>
65 1.2 bouyer #include <dev/ic/wdcreg.h>
66 1.2 bouyer #include <dev/ic/wdcvar.h>
67 1.2 bouyer #include <dev/scsipi/scsipi_all.h>
68 1.2 bouyer #include <dev/scsipi/scsipiconf.h>
69 1.2 bouyer #include <dev/scsipi/atapiconf.h>
70 1.2 bouyer
71 1.2 bouyer #define DEBUG_INTR 0x01
72 1.2 bouyer #define DEBUG_XFERS 0x02
73 1.2 bouyer #define DEBUG_STATUS 0x04
74 1.2 bouyer #define DEBUG_FUNCS 0x08
75 1.2 bouyer #define DEBUG_PROBE 0x10
76 1.2 bouyer #ifdef WDCDEBUG
77 1.3 bouyer int wdcdebug_atapi_mask = 0;
78 1.2 bouyer #define WDCDEBUG_PRINT(args, level) \
79 1.2 bouyer if (wdcdebug_atapi_mask & (level)) \
80 1.2 bouyer printf args
81 1.2 bouyer #else
82 1.2 bouyer #define WDCDEBUG_PRINT(args, level)
83 1.2 bouyer #endif
84 1.2 bouyer
85 1.2 bouyer #define ATAPI_DELAY 10 /* 10 ms, this is used only before sending a cmd */
86 1.2 bouyer
87 1.2 bouyer void wdc_atapi_minphys __P((struct buf *bp));
88 1.2 bouyer void wdc_atapi_start __P((struct channel_softc *,struct wdc_xfer *));
89 1.20 bouyer int wdc_atapi_intr __P((struct channel_softc *, struct wdc_xfer *, int));
90 1.20 bouyer int wdc_atapi_ctrl __P((struct channel_softc *, struct wdc_xfer *, int));
91 1.2 bouyer void wdc_atapi_done __P((struct channel_softc *, struct wdc_xfer *));
92 1.2 bouyer void wdc_atapi_reset __P((struct channel_softc *, struct wdc_xfer *));
93 1.2 bouyer int wdc_atapi_send_cmd __P((struct scsipi_xfer *sc_xfer));
94 1.2 bouyer
95 1.2 bouyer #define MAX_SIZE MAXPHYS
96 1.2 bouyer
97 1.2 bouyer void
98 1.2 bouyer wdc_atapibus_attach(chp)
99 1.2 bouyer struct channel_softc *chp;
100 1.2 bouyer {
101 1.2 bouyer struct wdc_softc *wdc = chp->wdc;
102 1.2 bouyer int channel = chp->channel;
103 1.2 bouyer struct ata_atapi_attach aa_link;
104 1.2 bouyer
105 1.9 thorpej /*
106 1.9 thorpej * Fill in the adapter.
107 1.9 thorpej */
108 1.9 thorpej wdc->sc_atapi_adapter.scsipi_cmd = wdc_atapi_send_cmd;
109 1.9 thorpej wdc->sc_atapi_adapter.scsipi_minphys = wdc_atapi_minphys;
110 1.9 thorpej
111 1.2 bouyer memset(&aa_link, 0, sizeof(struct ata_atapi_attach));
112 1.2 bouyer aa_link.aa_type = T_ATAPI;
113 1.2 bouyer aa_link.aa_channel = channel;
114 1.2 bouyer aa_link.aa_openings = 1;
115 1.2 bouyer aa_link.aa_drv_data = chp->ch_drive; /* pass the whole array */
116 1.9 thorpej aa_link.aa_bus_private = &wdc->sc_atapi_adapter;
117 1.2 bouyer (void)config_found(&wdc->sc_dev, (void *)&aa_link, atapi_print);
118 1.2 bouyer }
119 1.2 bouyer
120 1.2 bouyer void
121 1.2 bouyer wdc_atapi_minphys (struct buf *bp)
122 1.2 bouyer {
123 1.2 bouyer if(bp->b_bcount > MAX_SIZE)
124 1.2 bouyer bp->b_bcount = MAX_SIZE;
125 1.2 bouyer minphys(bp);
126 1.2 bouyer }
127 1.2 bouyer
128 1.2 bouyer int
129 1.2 bouyer wdc_atapi_get_params(ab_link, drive, flags, id)
130 1.2 bouyer struct scsipi_link *ab_link;
131 1.2 bouyer u_int8_t drive;
132 1.2 bouyer int flags;
133 1.2 bouyer struct ataparams *id;
134 1.2 bouyer {
135 1.2 bouyer struct wdc_softc *wdc = (void*)ab_link->adapter_softc;
136 1.2 bouyer struct channel_softc *chp =
137 1.10 drochner wdc->channels[ab_link->scsipi_atapi.channel];
138 1.2 bouyer struct wdc_command wdc_c;
139 1.2 bouyer
140 1.2 bouyer /* if no ATAPI device detected at wdc attach time, skip */
141 1.2 bouyer /*
142 1.2 bouyer * XXX this will break scsireprobe if this is of any interest for
143 1.2 bouyer * ATAPI devices one day.
144 1.2 bouyer */
145 1.2 bouyer if ((chp->ch_drive[drive].drive_flags & DRIVE_ATAPI) == 0) {
146 1.2 bouyer WDCDEBUG_PRINT(("wdc_atapi_get_params: drive %d not present\n",
147 1.2 bouyer drive), DEBUG_PROBE);
148 1.2 bouyer return -1;
149 1.2 bouyer }
150 1.2 bouyer memset(&wdc_c, 0, sizeof(struct wdc_command));
151 1.2 bouyer wdc_c.r_command = ATAPI_SOFT_RESET;
152 1.2 bouyer wdc_c.r_st_bmask = 0;
153 1.2 bouyer wdc_c.r_st_pmask = 0;
154 1.2 bouyer wdc_c.flags = AT_POLL;
155 1.2 bouyer wdc_c.timeout = WDC_RESET_WAIT;
156 1.2 bouyer if (wdc_exec_command(&chp->ch_drive[drive], &wdc_c) != WDC_COMPLETE) {
157 1.2 bouyer printf("wdc_atapi_get_params: ATAPI_SOFT_RESET failed for"
158 1.2 bouyer " drive %s:%d:%d: driver failed\n",
159 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, drive);
160 1.2 bouyer panic("wdc_atapi_get_params");
161 1.2 bouyer }
162 1.2 bouyer if (wdc_c.flags & (AT_ERROR | AT_TIMEOU | AT_DF)) {
163 1.2 bouyer WDCDEBUG_PRINT(("wdc_atapi_get_params: ATAPI_SOFT_RESET "
164 1.2 bouyer "failed for drive %s:%d:%d: error 0x%x\n",
165 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, drive,
166 1.2 bouyer wdc_c.r_error), DEBUG_PROBE);
167 1.2 bouyer return -1;
168 1.2 bouyer }
169 1.2 bouyer chp->ch_drive[drive].state = 0;
170 1.2 bouyer
171 1.2 bouyer bus_space_read_1(chp->cmd_iot, chp->cmd_ioh, wd_status);
172 1.2 bouyer
173 1.2 bouyer /* Some ATAPI devices need a bit more time after software reset. */
174 1.2 bouyer delay(5000);
175 1.2 bouyer if (ata_get_params(&chp->ch_drive[drive], AT_POLL, id) != 0) {
176 1.2 bouyer WDCDEBUG_PRINT(("wdc_atapi_get_params: ATAPI_IDENTIFY_DEVICE "
177 1.2 bouyer "failed for drive %s:%d:%d: error 0x%x\n",
178 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, drive,
179 1.2 bouyer wdc_c.r_error), DEBUG_PROBE);
180 1.2 bouyer return -1;
181 1.2 bouyer }
182 1.2 bouyer return COMPLETE;
183 1.2 bouyer }
184 1.2 bouyer
185 1.2 bouyer int
186 1.2 bouyer wdc_atapi_send_cmd(sc_xfer)
187 1.2 bouyer struct scsipi_xfer *sc_xfer;
188 1.2 bouyer {
189 1.12 bouyer struct wdc_softc *wdc = (void*)sc_xfer->sc_link->adapter_softc;
190 1.2 bouyer struct wdc_xfer *xfer;
191 1.2 bouyer int flags = sc_xfer->flags;
192 1.2 bouyer int channel = sc_xfer->sc_link->scsipi_atapi.channel;
193 1.2 bouyer int drive = sc_xfer->sc_link->scsipi_atapi.drive;
194 1.2 bouyer int s, ret;
195 1.2 bouyer
196 1.5 bouyer WDCDEBUG_PRINT(("wdc_atapi_send_cmd %s:%d:%d\n",
197 1.5 bouyer wdc->sc_dev.dv_xname, channel, drive), DEBUG_XFERS);
198 1.2 bouyer
199 1.2 bouyer xfer = wdc_get_xfer(flags & SCSI_NOSLEEP ? WDC_NOSLEEP : WDC_CANSLEEP);
200 1.2 bouyer if (xfer == NULL) {
201 1.2 bouyer return TRY_AGAIN_LATER;
202 1.2 bouyer }
203 1.2 bouyer if (sc_xfer->flags & SCSI_POLL)
204 1.2 bouyer xfer->c_flags |= C_POLL;
205 1.2 bouyer xfer->drive = drive;
206 1.2 bouyer xfer->c_flags |= C_ATAPI;
207 1.2 bouyer xfer->cmd = sc_xfer;
208 1.2 bouyer xfer->databuf = sc_xfer->data;
209 1.2 bouyer xfer->c_bcount = sc_xfer->datalen;
210 1.2 bouyer xfer->c_start = wdc_atapi_start;
211 1.2 bouyer xfer->c_intr = wdc_atapi_intr;
212 1.2 bouyer s = splbio();
213 1.10 drochner wdc_exec_xfer(wdc->channels[channel], xfer);
214 1.2 bouyer #ifdef DIAGNOSTIC
215 1.2 bouyer if ((sc_xfer->flags & SCSI_POLL) != 0 &&
216 1.2 bouyer (sc_xfer->flags & ITSDONE) == 0)
217 1.2 bouyer panic("wdc_atapi_send_cmd: polled command not done");
218 1.2 bouyer #endif
219 1.2 bouyer ret = (sc_xfer->flags & ITSDONE) ? COMPLETE : SUCCESSFULLY_QUEUED;
220 1.2 bouyer splx(s);
221 1.2 bouyer return ret;
222 1.2 bouyer }
223 1.2 bouyer
224 1.2 bouyer void
225 1.2 bouyer wdc_atapi_start(chp, xfer)
226 1.2 bouyer struct channel_softc *chp;
227 1.2 bouyer struct wdc_xfer *xfer;
228 1.2 bouyer {
229 1.2 bouyer struct scsipi_xfer *sc_xfer = xfer->cmd;
230 1.2 bouyer struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
231 1.2 bouyer
232 1.5 bouyer WDCDEBUG_PRINT(("wdc_atapi_start %s:%d:%d, scsi flags 0x%x \n",
233 1.5 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, drvp->drive,
234 1.5 bouyer sc_xfer->flags), DEBUG_XFERS);
235 1.19 bouyer /* Adjust C_DMA, it may have changed if we are requesting sense */
236 1.19 bouyer if ((drvp->drive_flags & (DRIVE_DMA | DRIVE_UDMA)) &&
237 1.19 bouyer (sc_xfer->datalen > 0 || (xfer->c_flags & C_SENSE)))
238 1.19 bouyer xfer->c_flags |= C_DMA;
239 1.19 bouyer else
240 1.19 bouyer xfer->c_flags &= ~C_DMA;
241 1.24 bouyer /* start timeout machinery */
242 1.24 bouyer if ((sc_xfer->flags & SCSI_POLL) == 0)
243 1.24 bouyer timeout(wdctimeout, chp, sc_xfer->timeout * hz / 1000);
244 1.2 bouyer /* Do control operations specially. */
245 1.2 bouyer if (drvp->state < READY) {
246 1.2 bouyer if (drvp->state != PIOMODE) {
247 1.2 bouyer printf("%s:%d:%d: bad state %d in wdc_atapi_start\n",
248 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel,
249 1.2 bouyer xfer->drive, drvp->state);
250 1.2 bouyer panic("wdc_atapi_start: bad state");
251 1.2 bouyer }
252 1.20 bouyer wdc_atapi_ctrl(chp, xfer, 0);
253 1.2 bouyer return;
254 1.2 bouyer }
255 1.2 bouyer bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, wd_sdh,
256 1.2 bouyer WDSD_IBM | (xfer->drive << 4));
257 1.2 bouyer if (wait_for_unbusy(chp, ATAPI_DELAY) < 0) {
258 1.2 bouyer printf("wdc_atapi_start: not ready, st = %02x\n",
259 1.2 bouyer chp->ch_status);
260 1.3 bouyer sc_xfer->error = XS_TIMEOUT;
261 1.2 bouyer wdc_atapi_reset(chp, xfer);
262 1.2 bouyer return;
263 1.2 bouyer }
264 1.2 bouyer
265 1.2 bouyer /*
266 1.2 bouyer * Even with WDCS_ERR, the device should accept a command packet
267 1.2 bouyer * Limit length to what can be stuffed into the cylinder register
268 1.2 bouyer * (16 bits). Some CD-ROMs seem to interpret '0' as 65536,
269 1.2 bouyer * but not all devices do that and it's not obvious from the
270 1.2 bouyer * ATAPI spec that that behaviour should be expected. If more
271 1.2 bouyer * data is necessary, multiple data transfer phases will be done.
272 1.2 bouyer */
273 1.5 bouyer
274 1.2 bouyer wdccommand(chp, xfer->drive, ATAPI_PKT_CMD,
275 1.2 bouyer sc_xfer->datalen <= 0xffff ? sc_xfer->datalen : 0xffff,
276 1.2 bouyer 0, 0, 0,
277 1.2 bouyer (xfer->c_flags & C_DMA) ? ATAPI_PKT_CMD_FTRE_DMA : 0);
278 1.2 bouyer
279 1.2 bouyer /*
280 1.2 bouyer * If there is no interrupt for CMD input, busy-wait for it (done in
281 1.2 bouyer * the interrupt routine. If it is a polled command, call the interrupt
282 1.2 bouyer * routine until command is done.
283 1.2 bouyer */
284 1.21 bouyer if ((sc_xfer->sc_link->scsipi_atapi.cap & ATAPI_CFG_DRQ_MASK) !=
285 1.21 bouyer ATAPI_CFG_IRQ_DRQ || (sc_xfer->flags & SCSI_POLL)) {
286 1.2 bouyer /* Wait for at last 400ns for status bit to be valid */
287 1.20 bouyer DELAY(1);
288 1.20 bouyer wdc_atapi_intr(chp, xfer, 0);
289 1.21 bouyer } else {
290 1.21 bouyer chp->ch_flags |= WDCF_IRQ_WAIT;
291 1.2 bouyer }
292 1.2 bouyer if (sc_xfer->flags & SCSI_POLL) {
293 1.2 bouyer while ((sc_xfer->flags & ITSDONE) == 0) {
294 1.2 bouyer /* Wait for at last 400ns for status bit to be valid */
295 1.20 bouyer DELAY(1);
296 1.20 bouyer wdc_atapi_intr(chp, xfer, 0);
297 1.2 bouyer }
298 1.2 bouyer }
299 1.2 bouyer }
300 1.2 bouyer
301 1.2 bouyer int
302 1.20 bouyer wdc_atapi_intr(chp, xfer, irq)
303 1.2 bouyer struct channel_softc *chp;
304 1.2 bouyer struct wdc_xfer *xfer;
305 1.20 bouyer int irq;
306 1.2 bouyer {
307 1.2 bouyer struct scsipi_xfer *sc_xfer = xfer->cmd;
308 1.2 bouyer struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
309 1.2 bouyer int len, phase, i, retries=0;
310 1.2 bouyer int ire, dma_err = 0;
311 1.2 bouyer int dma_flags = 0;
312 1.8 bouyer struct scsipi_generic _cmd_reqsense;
313 1.8 bouyer struct scsipi_sense *cmd_reqsense =
314 1.8 bouyer (struct scsipi_sense *)&_cmd_reqsense;
315 1.8 bouyer void *cmd;
316 1.2 bouyer
317 1.5 bouyer WDCDEBUG_PRINT(("wdc_atapi_intr %s:%d:%d\n",
318 1.5 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, drvp->drive), DEBUG_INTR);
319 1.2 bouyer
320 1.2 bouyer /* Is it not a transfer, but a control operation? */
321 1.2 bouyer if (drvp->state < READY) {
322 1.2 bouyer printf("%s:%d:%d: bad state %d in wdc_atapi_intr\n",
323 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
324 1.2 bouyer drvp->state);
325 1.2 bouyer panic("wdc_atapi_intr: bad state\n");
326 1.2 bouyer }
327 1.24 bouyer /*
328 1.24 bouyer * If we missed an interrupt in a PIO transfer, reset and restart.
329 1.24 bouyer * Don't try to continue transfer, we may have missed cycles.
330 1.24 bouyer */
331 1.24 bouyer if ((xfer->c_flags & (C_TIMEOU | C_DMA)) == C_TIMEOU) {
332 1.24 bouyer sc_xfer->error = XS_TIMEOUT;
333 1.24 bouyer wdc_atapi_reset(chp, xfer);
334 1.24 bouyer }
335 1.24 bouyer
336 1.2 bouyer /* Ack interrupt done in wait_for_unbusy */
337 1.2 bouyer bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, wd_sdh,
338 1.2 bouyer WDSD_IBM | (xfer->drive << 4));
339 1.19 bouyer if (wait_for_unbusy(chp,
340 1.20 bouyer (irq == 0) ? sc_xfer->timeout : 0) != 0) {
341 1.20 bouyer if (irq && (xfer->c_flags & C_TIMEOU) == 0)
342 1.19 bouyer return 0; /* IRQ was not for us */
343 1.16 bouyer printf("%s:%d:%d: device timeout, c_bcount=%d, c_skip=%d\n",
344 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
345 1.2 bouyer xfer->c_bcount, xfer->c_skip);
346 1.11 bouyer if (xfer->c_flags & C_DMA)
347 1.19 bouyer drvp->n_dmaerrs++;
348 1.3 bouyer sc_xfer->error = XS_TIMEOUT;
349 1.2 bouyer wdc_atapi_reset(chp, xfer);
350 1.2 bouyer return 1;
351 1.2 bouyer }
352 1.19 bouyer /* If we missed an IRQ and were using DMA, flag it as a DMA error */
353 1.19 bouyer if ((xfer->c_flags & C_TIMEOU) && (xfer->c_flags & C_DMA))
354 1.19 bouyer drvp->n_dmaerrs++;
355 1.8 bouyer /*
356 1.8 bouyer * if the request sense command was aborted, report the short sense
357 1.8 bouyer * previously recorded, else continue normal processing
358 1.8 bouyer */
359 1.8 bouyer
360 1.8 bouyer if ((xfer->c_flags & C_SENSE) != 0 &&
361 1.8 bouyer (chp->ch_status & WDCS_ERR) != 0 &&
362 1.2 bouyer (chp->ch_error & WDCE_ABRT) != 0) {
363 1.8 bouyer WDCDEBUG_PRINT(("wdc_atapi_intr: request_sense aborted, "
364 1.8 bouyer "calling wdc_atapi_done(), sense 0x%x\n",
365 1.8 bouyer sc_xfer->sense.atapi_sense), DEBUG_INTR);
366 1.2 bouyer wdc_atapi_done(chp, xfer);
367 1.2 bouyer return 1;
368 1.2 bouyer }
369 1.2 bouyer
370 1.2 bouyer if (xfer->c_flags & C_DMA) {
371 1.19 bouyer dma_flags = ((sc_xfer->flags & SCSI_DATA_IN) ||
372 1.19 bouyer (xfer->c_flags & C_SENSE)) ? WDC_DMA_READ : 0;
373 1.2 bouyer dma_flags |= sc_xfer->flags & SCSI_POLL ? WDC_DMA_POLL : 0;
374 1.2 bouyer }
375 1.2 bouyer again:
376 1.2 bouyer len = bus_space_read_1(chp->cmd_iot, chp->cmd_ioh, wd_cyl_lo) +
377 1.2 bouyer 256 * bus_space_read_1(chp->cmd_iot, chp->cmd_ioh, wd_cyl_hi);
378 1.2 bouyer ire = bus_space_read_1(chp->cmd_iot, chp->cmd_ioh, wd_ireason);
379 1.2 bouyer phase = (ire & (WDCI_CMD | WDCI_IN)) | (chp->ch_status & WDCS_DRQ);
380 1.2 bouyer WDCDEBUG_PRINT(("wdc_atapi_intr: c_bcount %d len %d st 0x%x err 0x%x "
381 1.2 bouyer "ire 0x%x :", xfer->c_bcount,
382 1.2 bouyer len, chp->ch_status, chp->ch_error, ire), DEBUG_INTR);
383 1.2 bouyer
384 1.2 bouyer switch (phase) {
385 1.2 bouyer case PHASE_CMDOUT:
386 1.8 bouyer if (xfer->c_flags & C_SENSE) {
387 1.8 bouyer memset(cmd_reqsense, 0, sizeof(struct scsipi_generic));
388 1.8 bouyer cmd_reqsense->opcode = REQUEST_SENSE;
389 1.8 bouyer cmd_reqsense->length = xfer->c_bcount;
390 1.8 bouyer cmd = cmd_reqsense;
391 1.8 bouyer } else {
392 1.8 bouyer cmd = sc_xfer->cmd;
393 1.8 bouyer }
394 1.2 bouyer WDCDEBUG_PRINT(("PHASE_CMDOUT\n"), DEBUG_INTR);
395 1.2 bouyer /* Init the DMA channel if necessary */
396 1.2 bouyer if (xfer->c_flags & C_DMA) {
397 1.2 bouyer if ((*chp->wdc->dma_init)(chp->wdc->dma_arg,
398 1.2 bouyer chp->channel, xfer->drive,
399 1.8 bouyer xfer->databuf, xfer->c_bcount, dma_flags) != 0) {
400 1.2 bouyer sc_xfer->error = XS_DRIVER_STUFFUP;
401 1.2 bouyer break;
402 1.2 bouyer }
403 1.2 bouyer }
404 1.2 bouyer /* send packet command */
405 1.2 bouyer /* Commands are 12 or 16 bytes long. It's 32-bit aligned */
406 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM)) {
407 1.2 bouyer if (drvp->drive_flags & DRIVE_CAP32) {
408 1.2 bouyer bus_space_write_multi_4(chp->data32iot,
409 1.2 bouyer chp->data32ioh, 0,
410 1.8 bouyer (u_int32_t *)cmd,
411 1.2 bouyer sc_xfer->cmdlen >> 2);
412 1.2 bouyer } else {
413 1.2 bouyer bus_space_write_multi_2(chp->cmd_iot,
414 1.2 bouyer chp->cmd_ioh, wd_data,
415 1.8 bouyer (u_int16_t *)cmd,
416 1.2 bouyer sc_xfer->cmdlen >> 1);
417 1.2 bouyer }
418 1.2 bouyer } else {
419 1.2 bouyer if (drvp->drive_flags & DRIVE_CAP32) {
420 1.2 bouyer bus_space_write_multi_stream_4(chp->data32iot,
421 1.2 bouyer chp->data32ioh, 0,
422 1.8 bouyer (u_int32_t *)cmd,
423 1.2 bouyer sc_xfer->cmdlen >> 2);
424 1.2 bouyer } else {
425 1.2 bouyer bus_space_write_multi_stream_2(chp->cmd_iot,
426 1.2 bouyer chp->cmd_ioh, wd_data,
427 1.8 bouyer (u_int16_t *)cmd,
428 1.2 bouyer sc_xfer->cmdlen >> 1);
429 1.2 bouyer }
430 1.2 bouyer }
431 1.2 bouyer /* Start the DMA channel if necessary */
432 1.2 bouyer if (xfer->c_flags & C_DMA) {
433 1.2 bouyer (*chp->wdc->dma_start)(chp->wdc->dma_arg,
434 1.2 bouyer chp->channel, xfer->drive, dma_flags);
435 1.2 bouyer }
436 1.2 bouyer
437 1.2 bouyer if ((sc_xfer->flags & SCSI_POLL) == 0) {
438 1.2 bouyer chp->ch_flags |= WDCF_IRQ_WAIT;
439 1.2 bouyer }
440 1.2 bouyer return 1;
441 1.2 bouyer
442 1.2 bouyer case PHASE_DATAOUT:
443 1.2 bouyer /* write data */
444 1.2 bouyer WDCDEBUG_PRINT(("PHASE_DATAOUT\n"), DEBUG_INTR);
445 1.2 bouyer if ((sc_xfer->flags & SCSI_DATA_OUT) == 0 ||
446 1.2 bouyer (xfer->c_flags & C_DMA) != 0) {
447 1.15 bouyer printf("wdc_atapi_intr: bad data phase DATAOUT\n");
448 1.2 bouyer if (xfer->c_flags & C_DMA) {
449 1.11 bouyer (*chp->wdc->dma_finish)(chp->wdc->dma_arg,
450 1.11 bouyer chp->channel, xfer->drive, dma_flags);
451 1.11 bouyer drvp->n_dmaerrs++;
452 1.2 bouyer }
453 1.3 bouyer sc_xfer->error = XS_TIMEOUT;
454 1.2 bouyer wdc_atapi_reset(chp, xfer);
455 1.2 bouyer return 1;
456 1.2 bouyer }
457 1.2 bouyer if (xfer->c_bcount < len) {
458 1.2 bouyer printf("wdc_atapi_intr: warning: write only "
459 1.2 bouyer "%d of %d requested bytes\n", xfer->c_bcount, len);
460 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM)) {
461 1.2 bouyer bus_space_write_multi_2(chp->cmd_iot,
462 1.2 bouyer chp->cmd_ioh, wd_data,
463 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
464 1.14 thorpej xfer->c_skip),
465 1.2 bouyer xfer->c_bcount >> 1);
466 1.2 bouyer } else {
467 1.2 bouyer bus_space_write_multi_stream_2(chp->cmd_iot,
468 1.2 bouyer chp->cmd_ioh, wd_data,
469 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
470 1.14 thorpej xfer->c_skip),
471 1.2 bouyer xfer->c_bcount >> 1);
472 1.2 bouyer }
473 1.2 bouyer for (i = xfer->c_bcount; i < len; i += 2)
474 1.2 bouyer bus_space_write_2(chp->cmd_iot, chp->cmd_ioh,
475 1.2 bouyer wd_data, 0);
476 1.2 bouyer xfer->c_skip += xfer->c_bcount;
477 1.2 bouyer xfer->c_bcount = 0;
478 1.2 bouyer } else {
479 1.2 bouyer if (drvp->drive_flags & DRIVE_CAP32) {
480 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM))
481 1.2 bouyer bus_space_write_multi_4(chp->data32iot,
482 1.2 bouyer chp->data32ioh, 0,
483 1.14 thorpej (u_int32_t *)((char *)xfer->databuf +
484 1.14 thorpej xfer->c_skip),
485 1.13 augustss len >> 2);
486 1.2 bouyer else
487 1.12 bouyer bus_space_write_multi_stream_4(chp->data32iot,
488 1.12 bouyer chp->data32ioh, wd_data,
489 1.14 thorpej (u_int32_t *)((char *)xfer->databuf +
490 1.14 thorpej xfer->c_skip),
491 1.13 augustss len >> 2);
492 1.2 bouyer
493 1.2 bouyer xfer->c_skip += len & 0xfffffffc;
494 1.2 bouyer xfer->c_bcount -= len & 0xfffffffc;
495 1.2 bouyer len = len & 0x03;
496 1.2 bouyer }
497 1.2 bouyer if (len > 0) {
498 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM))
499 1.2 bouyer bus_space_write_multi_2(chp->cmd_iot,
500 1.2 bouyer chp->cmd_ioh, wd_data,
501 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
502 1.14 thorpej xfer->c_skip),
503 1.13 augustss len >> 1);
504 1.2 bouyer else
505 1.2 bouyer bus_space_write_multi_stream_2(chp->cmd_iot,
506 1.2 bouyer chp->cmd_ioh, wd_data,
507 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
508 1.14 thorpej xfer->c_skip),
509 1.13 augustss len >> 1);
510 1.2 bouyer xfer->c_skip += len;
511 1.2 bouyer xfer->c_bcount -= len;
512 1.2 bouyer }
513 1.2 bouyer }
514 1.2 bouyer if ((sc_xfer->flags & SCSI_POLL) == 0) {
515 1.2 bouyer chp->ch_flags |= WDCF_IRQ_WAIT;
516 1.2 bouyer }
517 1.2 bouyer return 1;
518 1.2 bouyer
519 1.2 bouyer case PHASE_DATAIN:
520 1.2 bouyer /* Read data */
521 1.2 bouyer WDCDEBUG_PRINT(("PHASE_DATAIN\n"), DEBUG_INTR);
522 1.8 bouyer if (((sc_xfer->flags & SCSI_DATA_IN) == 0 &&
523 1.8 bouyer (xfer->c_flags & C_SENSE) == 0) ||
524 1.2 bouyer (xfer->c_flags & C_DMA) != 0) {
525 1.15 bouyer printf("wdc_atapi_intr: bad data phase DATAIN\n");
526 1.2 bouyer if (xfer->c_flags & C_DMA) {
527 1.11 bouyer (*chp->wdc->dma_finish)(chp->wdc->dma_arg,
528 1.11 bouyer chp->channel, xfer->drive, dma_flags);
529 1.11 bouyer drvp->n_dmaerrs++;
530 1.2 bouyer }
531 1.3 bouyer sc_xfer->error = XS_TIMEOUT;
532 1.2 bouyer wdc_atapi_reset(chp, xfer);
533 1.2 bouyer return 1;
534 1.2 bouyer }
535 1.2 bouyer if (xfer->c_bcount < len) {
536 1.2 bouyer printf("wdc_atapi_intr: warning: reading only "
537 1.2 bouyer "%d of %d bytes\n", xfer->c_bcount, len);
538 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM)) {
539 1.2 bouyer bus_space_read_multi_2(chp->cmd_iot,
540 1.2 bouyer chp->cmd_ioh, wd_data,
541 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
542 1.14 thorpej xfer->c_skip),
543 1.13 augustss xfer->c_bcount >> 1);
544 1.2 bouyer } else {
545 1.2 bouyer bus_space_read_multi_stream_2(chp->cmd_iot,
546 1.2 bouyer chp->cmd_ioh, wd_data,
547 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
548 1.14 thorpej xfer->c_skip),
549 1.13 augustss xfer->c_bcount >> 1);
550 1.2 bouyer }
551 1.2 bouyer wdcbit_bucket(chp, len - xfer->c_bcount);
552 1.2 bouyer xfer->c_skip += xfer->c_bcount;
553 1.2 bouyer xfer->c_bcount = 0;
554 1.2 bouyer } else {
555 1.2 bouyer if (drvp->drive_flags & DRIVE_CAP32) {
556 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM))
557 1.2 bouyer bus_space_read_multi_4(chp->data32iot,
558 1.2 bouyer chp->data32ioh, 0,
559 1.14 thorpej (u_int32_t *)((char *)xfer->databuf +
560 1.14 thorpej xfer->c_skip),
561 1.13 augustss len >> 2);
562 1.2 bouyer else
563 1.12 bouyer bus_space_read_multi_stream_4(chp->data32iot,
564 1.12 bouyer chp->data32ioh, wd_data,
565 1.14 thorpej (u_int32_t *)((char *)xfer->databuf +
566 1.14 thorpej xfer->c_skip),
567 1.13 augustss len >> 2);
568 1.2 bouyer
569 1.2 bouyer xfer->c_skip += len & 0xfffffffc;
570 1.2 bouyer xfer->c_bcount -= len & 0xfffffffc;
571 1.2 bouyer len = len & 0x03;
572 1.2 bouyer }
573 1.2 bouyer if (len > 0) {
574 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM))
575 1.2 bouyer bus_space_read_multi_2(chp->cmd_iot,
576 1.2 bouyer chp->cmd_ioh, wd_data,
577 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
578 1.14 thorpej xfer->c_skip),
579 1.13 augustss len >> 1);
580 1.2 bouyer else
581 1.2 bouyer bus_space_read_multi_stream_2(chp->cmd_iot,
582 1.2 bouyer chp->cmd_ioh, wd_data,
583 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
584 1.14 thorpej xfer->c_skip),
585 1.13 augustss len >> 1);
586 1.2 bouyer xfer->c_skip += len;
587 1.2 bouyer xfer->c_bcount -=len;
588 1.2 bouyer }
589 1.2 bouyer }
590 1.2 bouyer if ((sc_xfer->flags & SCSI_POLL) == 0) {
591 1.2 bouyer chp->ch_flags |= WDCF_IRQ_WAIT;
592 1.2 bouyer }
593 1.2 bouyer return 1;
594 1.2 bouyer
595 1.2 bouyer case PHASE_ABORTED:
596 1.2 bouyer case PHASE_COMPLETED:
597 1.2 bouyer WDCDEBUG_PRINT(("PHASE_COMPLETED\n"), DEBUG_INTR);
598 1.2 bouyer /* turn off DMA channel */
599 1.2 bouyer if (xfer->c_flags & C_DMA) {
600 1.2 bouyer dma_err = (*chp->wdc->dma_finish)(chp->wdc->dma_arg,
601 1.2 bouyer chp->channel, xfer->drive, dma_flags);
602 1.20 bouyer if (xfer->c_flags & C_SENSE)
603 1.20 bouyer xfer->c_bcount -=
604 1.20 bouyer sizeof(sc_xfer->sense.scsi_sense);
605 1.20 bouyer else
606 1.20 bouyer xfer->c_bcount -= sc_xfer->datalen;
607 1.2 bouyer }
608 1.8 bouyer if (xfer->c_flags & C_SENSE) {
609 1.8 bouyer if ((chp->ch_status & WDCS_ERR) || dma_err < 0) {
610 1.8 bouyer /*
611 1.8 bouyer * request sense failed ! it's not suppossed
612 1.8 bouyer * to be possible
613 1.8 bouyer */
614 1.17 bouyer if (dma_err < 0)
615 1.17 bouyer drvp->n_dmaerrs++;
616 1.17 bouyer sc_xfer->error = XS_RESET;
617 1.17 bouyer wdc_atapi_reset(chp, xfer);
618 1.17 bouyer return (1);
619 1.17 bouyer } else if (xfer->c_bcount <
620 1.17 bouyer sizeof(sc_xfer->sense.scsi_sense)) {
621 1.8 bouyer /* use the sense we just read */
622 1.8 bouyer sc_xfer->error = XS_SENSE;
623 1.17 bouyer } else {
624 1.17 bouyer /*
625 1.17 bouyer * command completed, but no data was read.
626 1.17 bouyer * use the short sense we saved previsouly.
627 1.17 bouyer */
628 1.17 bouyer sc_xfer->error = XS_SHORTSENSE;
629 1.8 bouyer }
630 1.8 bouyer } else {
631 1.23 perry sc_xfer->resid = xfer->c_bcount;
632 1.8 bouyer if (chp->ch_status & WDCS_ERR) {
633 1.8 bouyer /* save the short sense */
634 1.8 bouyer sc_xfer->error = XS_SHORTSENSE;
635 1.8 bouyer sc_xfer->sense.atapi_sense = chp->ch_error;
636 1.12 bouyer if ((sc_xfer->sc_link->quirks &
637 1.12 bouyer ADEV_NOSENSE) == 0) {
638 1.12 bouyer /*
639 1.12 bouyer * let the driver issue a
640 1.12 bouyer * 'request sense'
641 1.12 bouyer */
642 1.12 bouyer xfer->databuf = &sc_xfer->sense;
643 1.12 bouyer xfer->c_bcount =
644 1.12 bouyer sizeof(sc_xfer->sense.scsi_sense);
645 1.23 perry xfer->c_skip = 0;
646 1.12 bouyer xfer->c_flags |= C_SENSE;
647 1.24 bouyer untimeout(wdctimeout, chp);
648 1.12 bouyer wdc_atapi_start(chp, xfer);
649 1.12 bouyer return 1;
650 1.12 bouyer }
651 1.8 bouyer } else if (dma_err < 0) {
652 1.11 bouyer drvp->n_dmaerrs++;
653 1.16 bouyer sc_xfer->error = XS_RESET;
654 1.16 bouyer wdc_atapi_reset(chp, xfer);
655 1.16 bouyer return (1);
656 1.8 bouyer }
657 1.2 bouyer }
658 1.7 bouyer if (xfer->c_bcount != 0) {
659 1.7 bouyer WDCDEBUG_PRINT(("wdc_atapi_intr: bcount value is "
660 1.7 bouyer "%d after io\n", xfer->c_bcount), DEBUG_XFERS);
661 1.7 bouyer }
662 1.2 bouyer #ifdef DIAGNOSTIC
663 1.7 bouyer if (xfer->c_bcount < 0) {
664 1.2 bouyer printf("wdc_atapi_intr warning: bcount value "
665 1.2 bouyer "is %d after io\n", xfer->c_bcount);
666 1.2 bouyer }
667 1.2 bouyer #endif
668 1.2 bouyer break;
669 1.2 bouyer
670 1.2 bouyer default:
671 1.2 bouyer if (++retries<500) {
672 1.2 bouyer DELAY(100);
673 1.2 bouyer chp->ch_status = bus_space_read_1(chp->cmd_iot,
674 1.2 bouyer chp->cmd_ioh, wd_status);
675 1.2 bouyer chp->ch_error = bus_space_read_1(chp->cmd_iot,
676 1.2 bouyer chp->cmd_ioh, wd_error);
677 1.2 bouyer goto again;
678 1.2 bouyer }
679 1.2 bouyer printf("wdc_atapi_intr: unknown phase 0x%x\n", phase);
680 1.2 bouyer if (chp->ch_status & WDCS_ERR) {
681 1.8 bouyer sc_xfer->error = XS_SHORTSENSE;
682 1.2 bouyer sc_xfer->sense.atapi_sense = chp->ch_error;
683 1.2 bouyer } else {
684 1.16 bouyer sc_xfer->error = XS_RESET;
685 1.16 bouyer wdc_atapi_reset(chp, xfer);
686 1.16 bouyer return (1);
687 1.2 bouyer }
688 1.2 bouyer }
689 1.2 bouyer WDCDEBUG_PRINT(("wdc_atapi_intr: wdc_atapi_done() (end), error 0x%x "
690 1.2 bouyer "sense 0x%x\n", sc_xfer->error, sc_xfer->sense.atapi_sense),
691 1.2 bouyer DEBUG_INTR);
692 1.2 bouyer wdc_atapi_done(chp, xfer);
693 1.2 bouyer return (1);
694 1.2 bouyer }
695 1.2 bouyer
696 1.2 bouyer int
697 1.20 bouyer wdc_atapi_ctrl(chp, xfer, irq)
698 1.2 bouyer struct channel_softc *chp;
699 1.2 bouyer struct wdc_xfer *xfer;
700 1.20 bouyer int irq;
701 1.2 bouyer {
702 1.2 bouyer struct scsipi_xfer *sc_xfer = xfer->cmd;
703 1.2 bouyer struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
704 1.2 bouyer char *errstring = NULL;
705 1.20 bouyer int delay = (irq == 0) ? ATAPI_DELAY : 0;
706 1.2 bouyer
707 1.2 bouyer /* Ack interrupt done in wait_for_unbusy */
708 1.2 bouyer again:
709 1.5 bouyer WDCDEBUG_PRINT(("wdc_atapi_ctrl %s:%d:%d state %d\n",
710 1.5 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, drvp->drive, drvp->state),
711 1.4 bouyer DEBUG_INTR | DEBUG_FUNCS);
712 1.2 bouyer bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, wd_sdh,
713 1.2 bouyer WDSD_IBM | (xfer->drive << 4));
714 1.2 bouyer switch (drvp->state) {
715 1.2 bouyer case PIOMODE:
716 1.22 bouyer piomode:
717 1.2 bouyer /* Don't try to set mode if controller can't be adjusted */
718 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_MODE) == 0)
719 1.2 bouyer goto ready;
720 1.6 bouyer /* Also don't try if the drive didn't report its mode */
721 1.6 bouyer if ((drvp->drive_flags & DRIVE_MODE) == 0)
722 1.6 bouyer goto ready;;
723 1.2 bouyer wdccommand(chp, drvp->drive, SET_FEATURES, 0, 0, 0,
724 1.2 bouyer 0x08 | drvp->PIO_mode, WDSF_SET_MODE);
725 1.2 bouyer drvp->state = PIOMODE_WAIT;
726 1.2 bouyer break;
727 1.2 bouyer case PIOMODE_WAIT:
728 1.2 bouyer errstring = "piomode";
729 1.19 bouyer if (wait_for_unbusy(chp, delay))
730 1.2 bouyer goto timeout;
731 1.22 bouyer if (chp->ch_status & WDCS_ERR) {
732 1.22 bouyer if (drvp->PIO_mode < 3) {
733 1.22 bouyer drvp->PIO_mode = 3;
734 1.22 bouyer goto piomode;
735 1.22 bouyer } else {
736 1.22 bouyer goto error;
737 1.22 bouyer }
738 1.22 bouyer }
739 1.2 bouyer /* fall through */
740 1.2 bouyer
741 1.2 bouyer case DMAMODE:
742 1.2 bouyer if (drvp->drive_flags & DRIVE_UDMA) {
743 1.2 bouyer wdccommand(chp, drvp->drive, SET_FEATURES, 0, 0, 0,
744 1.2 bouyer 0x40 | drvp->UDMA_mode, WDSF_SET_MODE);
745 1.2 bouyer } else if (drvp->drive_flags & DRIVE_DMA) {
746 1.2 bouyer wdccommand(chp, drvp->drive, SET_FEATURES, 0, 0, 0,
747 1.2 bouyer 0x20 | drvp->DMA_mode, WDSF_SET_MODE);
748 1.2 bouyer } else {
749 1.2 bouyer goto ready;
750 1.2 bouyer }
751 1.2 bouyer drvp->state = DMAMODE_WAIT;
752 1.2 bouyer break;
753 1.2 bouyer case DMAMODE_WAIT:
754 1.2 bouyer errstring = "dmamode";
755 1.19 bouyer if (wait_for_unbusy(chp, delay))
756 1.2 bouyer goto timeout;
757 1.2 bouyer if (chp->ch_status & WDCS_ERR)
758 1.2 bouyer goto error;
759 1.2 bouyer /* fall through */
760 1.2 bouyer
761 1.2 bouyer case READY:
762 1.2 bouyer ready:
763 1.2 bouyer drvp->state = READY;
764 1.2 bouyer xfer->c_intr = wdc_atapi_intr;
765 1.24 bouyer untimeout(wdctimeout, chp);
766 1.2 bouyer wdc_atapi_start(chp, xfer);
767 1.2 bouyer return 1;
768 1.2 bouyer }
769 1.2 bouyer if ((sc_xfer->flags & SCSI_POLL) == 0) {
770 1.2 bouyer chp->ch_flags |= WDCF_IRQ_WAIT;
771 1.2 bouyer xfer->c_intr = wdc_atapi_ctrl;
772 1.2 bouyer } else {
773 1.2 bouyer goto again;
774 1.2 bouyer }
775 1.2 bouyer return 1;
776 1.2 bouyer
777 1.2 bouyer timeout:
778 1.20 bouyer if (irq && (xfer->c_flags & C_TIMEOU) == 0) {
779 1.2 bouyer return 0; /* IRQ was not for us */
780 1.2 bouyer }
781 1.2 bouyer printf("%s:%d:%d: %s timed out\n",
782 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive, errstring);
783 1.3 bouyer sc_xfer->error = XS_TIMEOUT;
784 1.2 bouyer wdc_atapi_reset(chp, xfer);
785 1.2 bouyer return 1;
786 1.2 bouyer error:
787 1.2 bouyer printf("%s:%d:%d: %s ",
788 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
789 1.2 bouyer errstring);
790 1.3 bouyer printf("error (0x%x)\n", chp->ch_error);
791 1.8 bouyer sc_xfer->error = XS_SHORTSENSE;
792 1.2 bouyer sc_xfer->sense.atapi_sense = chp->ch_error;
793 1.3 bouyer wdc_atapi_reset(chp, xfer);
794 1.2 bouyer return 1;
795 1.2 bouyer }
796 1.2 bouyer
797 1.2 bouyer void
798 1.2 bouyer wdc_atapi_done(chp, xfer)
799 1.2 bouyer struct channel_softc *chp;
800 1.2 bouyer struct wdc_xfer *xfer;
801 1.2 bouyer {
802 1.2 bouyer struct scsipi_xfer *sc_xfer = xfer->cmd;
803 1.2 bouyer int need_done = xfer->c_flags & C_NEEDDONE;
804 1.11 bouyer struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
805 1.2 bouyer
806 1.5 bouyer WDCDEBUG_PRINT(("wdc_atapi_done %s:%d:%d: flags 0x%x\n",
807 1.5 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
808 1.5 bouyer (u_int)xfer->c_flags), DEBUG_XFERS);
809 1.24 bouyer untimeout(wdctimeout, chp);
810 1.2 bouyer /* remove this command from xfer queue */
811 1.2 bouyer wdc_free_xfer(chp, xfer);
812 1.2 bouyer sc_xfer->flags |= ITSDONE;
813 1.19 bouyer if (drvp->n_dmaerrs ||
814 1.19 bouyer (sc_xfer->error != XS_NOERROR && sc_xfer->error != XS_SENSE &&
815 1.19 bouyer sc_xfer->error != XS_SHORTSENSE)) {
816 1.11 bouyer drvp->n_dmaerrs = 0;
817 1.11 bouyer wdc_downgrade_mode(drvp);
818 1.11 bouyer }
819 1.11 bouyer
820 1.2 bouyer if (need_done) {
821 1.4 bouyer WDCDEBUG_PRINT(("wdc_atapi_done: scsipi_done\n"), DEBUG_XFERS);
822 1.2 bouyer scsipi_done(sc_xfer);
823 1.2 bouyer }
824 1.2 bouyer WDCDEBUG_PRINT(("wdcstart from wdc_atapi_done, flags 0x%x\n",
825 1.4 bouyer chp->ch_flags), DEBUG_XFERS);
826 1.10 drochner wdcstart(chp);
827 1.2 bouyer }
828 1.2 bouyer
829 1.2 bouyer void
830 1.2 bouyer wdc_atapi_reset(chp, xfer)
831 1.2 bouyer struct channel_softc *chp;
832 1.2 bouyer struct wdc_xfer *xfer;
833 1.2 bouyer {
834 1.2 bouyer struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
835 1.2 bouyer struct scsipi_xfer *sc_xfer = xfer->cmd;
836 1.2 bouyer
837 1.2 bouyer wdccommandshort(chp, xfer->drive, ATAPI_SOFT_RESET);
838 1.2 bouyer drvp->state = 0;
839 1.2 bouyer if (wait_for_unbusy(chp, WDC_RESET_WAIT) != 0) {
840 1.2 bouyer printf("%s:%d:%d: reset failed\n",
841 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel,
842 1.2 bouyer xfer->drive);
843 1.2 bouyer sc_xfer->error = XS_SELTIMEOUT;
844 1.2 bouyer }
845 1.2 bouyer wdc_atapi_done(chp, xfer);
846 1.2 bouyer return;
847 1.2 bouyer }
848