atapi_wdc.c revision 1.35 1 1.35 bouyer /* $NetBSD: atapi_wdc.c,v 1.35 2000/05/15 08:48:25 bouyer Exp $ */
2 1.2 bouyer
3 1.2 bouyer /*
4 1.2 bouyer * Copyright (c) 1998 Manuel Bouyer.
5 1.2 bouyer *
6 1.2 bouyer * Redistribution and use in source and binary forms, with or without
7 1.2 bouyer * modification, are permitted provided that the following conditions
8 1.2 bouyer * are met:
9 1.2 bouyer * 1. Redistributions of source code must retain the above copyright
10 1.2 bouyer * notice, this list of conditions and the following disclaimer.
11 1.2 bouyer * 2. Redistributions in binary form must reproduce the above copyright
12 1.2 bouyer * notice, this list of conditions and the following disclaimer in the
13 1.2 bouyer * documentation and/or other materials provided with the distribution.
14 1.2 bouyer * 3. All advertising materials mentioning features or use of this software
15 1.2 bouyer * must display the following acknowledgement:
16 1.2 bouyer * This product includes software developed by the University of
17 1.2 bouyer * California, Berkeley and its contributors.
18 1.2 bouyer * 4. Neither the name of the University nor the names of its contributors
19 1.2 bouyer * may be used to endorse or promote products derived from this software
20 1.2 bouyer * without specific prior written permission.
21 1.2 bouyer *
22 1.35 bouyer * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
23 1.35 bouyer * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
24 1.35 bouyer * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
25 1.35 bouyer * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
26 1.35 bouyer * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27 1.35 bouyer * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28 1.35 bouyer * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29 1.35 bouyer * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 1.35 bouyer * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31 1.35 bouyer * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32 1.2 bouyer *
33 1.2 bouyer */
34 1.2 bouyer
35 1.18 hubertf #ifndef WDCDEBUG
36 1.2 bouyer #define WDCDEBUG
37 1.18 hubertf #endif /* WDCDEBUG */
38 1.2 bouyer
39 1.2 bouyer #include <sys/param.h>
40 1.2 bouyer #include <sys/systm.h>
41 1.2 bouyer #include <sys/kernel.h>
42 1.2 bouyer #include <sys/file.h>
43 1.2 bouyer #include <sys/stat.h>
44 1.2 bouyer #include <sys/buf.h>
45 1.2 bouyer #include <sys/malloc.h>
46 1.2 bouyer #include <sys/device.h>
47 1.2 bouyer #include <sys/syslog.h>
48 1.2 bouyer #include <sys/proc.h>
49 1.2 bouyer
50 1.2 bouyer #include <vm/vm.h>
51 1.2 bouyer
52 1.2 bouyer #include <machine/intr.h>
53 1.2 bouyer #include <machine/bus.h>
54 1.2 bouyer
55 1.2 bouyer #ifndef __BUS_SPACE_HAS_STREAM_METHODS
56 1.2 bouyer #define bus_space_write_multi_stream_2 bus_space_write_multi_2
57 1.2 bouyer #define bus_space_write_multi_stream_4 bus_space_write_multi_4
58 1.2 bouyer #define bus_space_read_multi_stream_2 bus_space_read_multi_2
59 1.2 bouyer #define bus_space_read_multi_stream_4 bus_space_read_multi_4
60 1.2 bouyer #endif /* __BUS_SPACE_HAS_STREAM_METHODS */
61 1.2 bouyer
62 1.2 bouyer #include <dev/ata/atareg.h>
63 1.2 bouyer #include <dev/ata/atavar.h>
64 1.2 bouyer #include <dev/ic/wdcreg.h>
65 1.2 bouyer #include <dev/ic/wdcvar.h>
66 1.2 bouyer
67 1.2 bouyer #define DEBUG_INTR 0x01
68 1.2 bouyer #define DEBUG_XFERS 0x02
69 1.2 bouyer #define DEBUG_STATUS 0x04
70 1.2 bouyer #define DEBUG_FUNCS 0x08
71 1.2 bouyer #define DEBUG_PROBE 0x10
72 1.2 bouyer #ifdef WDCDEBUG
73 1.3 bouyer int wdcdebug_atapi_mask = 0;
74 1.2 bouyer #define WDCDEBUG_PRINT(args, level) \
75 1.2 bouyer if (wdcdebug_atapi_mask & (level)) \
76 1.2 bouyer printf args
77 1.2 bouyer #else
78 1.2 bouyer #define WDCDEBUG_PRINT(args, level)
79 1.2 bouyer #endif
80 1.2 bouyer
81 1.2 bouyer #define ATAPI_DELAY 10 /* 10 ms, this is used only before sending a cmd */
82 1.2 bouyer
83 1.2 bouyer void wdc_atapi_minphys __P((struct buf *bp));
84 1.2 bouyer void wdc_atapi_start __P((struct channel_softc *,struct wdc_xfer *));
85 1.20 bouyer int wdc_atapi_intr __P((struct channel_softc *, struct wdc_xfer *, int));
86 1.28 enami void wdc_atapi_kill_xfer __P((struct channel_softc *, struct wdc_xfer *));
87 1.20 bouyer int wdc_atapi_ctrl __P((struct channel_softc *, struct wdc_xfer *, int));
88 1.2 bouyer void wdc_atapi_done __P((struct channel_softc *, struct wdc_xfer *));
89 1.2 bouyer void wdc_atapi_reset __P((struct channel_softc *, struct wdc_xfer *));
90 1.33 bouyer int wdc_atapi_get_params __P((struct scsipi_link *, u_int8_t, int,
91 1.33 bouyer struct ataparams *));
92 1.33 bouyer void wdc_atapi_probedev __P(( struct atapibus_softc *, int));
93 1.2 bouyer int wdc_atapi_send_cmd __P((struct scsipi_xfer *sc_xfer));
94 1.2 bouyer
95 1.2 bouyer #define MAX_SIZE MAXPHYS
96 1.2 bouyer
97 1.2 bouyer void
98 1.2 bouyer wdc_atapibus_attach(chp)
99 1.2 bouyer struct channel_softc *chp;
100 1.2 bouyer {
101 1.2 bouyer struct wdc_softc *wdc = chp->wdc;
102 1.2 bouyer int channel = chp->channel;
103 1.2 bouyer struct ata_atapi_attach aa_link;
104 1.2 bouyer
105 1.9 thorpej /*
106 1.9 thorpej * Fill in the adapter.
107 1.9 thorpej */
108 1.33 bouyer wdc->sc_atapi_adapter._generic.scsipi_cmd = wdc_atapi_send_cmd;
109 1.33 bouyer wdc->sc_atapi_adapter._generic.scsipi_minphys = wdc_atapi_minphys;
110 1.33 bouyer wdc->sc_atapi_adapter.atapi_probedev = wdc_atapi_probedev;
111 1.34 augustss wdc->sc_atapi_adapter.atapi_kill_pending = atapi_kill_pending;
112 1.9 thorpej
113 1.2 bouyer memset(&aa_link, 0, sizeof(struct ata_atapi_attach));
114 1.2 bouyer aa_link.aa_type = T_ATAPI;
115 1.2 bouyer aa_link.aa_channel = channel;
116 1.2 bouyer aa_link.aa_openings = 1;
117 1.2 bouyer aa_link.aa_drv_data = chp->ch_drive; /* pass the whole array */
118 1.9 thorpej aa_link.aa_bus_private = &wdc->sc_atapi_adapter;
119 1.26 enami chp->atapibus = config_found(&wdc->sc_dev, (void *)&aa_link,
120 1.26 enami atapi_print);
121 1.2 bouyer }
122 1.2 bouyer
123 1.2 bouyer void
124 1.2 bouyer wdc_atapi_minphys (struct buf *bp)
125 1.2 bouyer {
126 1.2 bouyer if(bp->b_bcount > MAX_SIZE)
127 1.2 bouyer bp->b_bcount = MAX_SIZE;
128 1.2 bouyer minphys(bp);
129 1.2 bouyer }
130 1.2 bouyer
131 1.28 enami /*
132 1.28 enami * Kill off all pending xfers for a scsipi_link.
133 1.28 enami *
134 1.28 enami * Must be called at splbio().
135 1.28 enami */
136 1.28 enami void
137 1.28 enami atapi_kill_pending(sc_link)
138 1.28 enami struct scsipi_link *sc_link;
139 1.28 enami {
140 1.28 enami struct wdc_softc *wdc = (void *)sc_link->adapter_softc;
141 1.28 enami struct channel_softc *chp =
142 1.28 enami wdc->channels[sc_link->scsipi_atapi.channel];
143 1.28 enami
144 1.28 enami wdc_kill_pending(chp);
145 1.28 enami }
146 1.28 enami
147 1.28 enami void
148 1.28 enami wdc_atapi_kill_xfer(chp, xfer)
149 1.28 enami struct channel_softc *chp;
150 1.28 enami struct wdc_xfer *xfer;
151 1.28 enami {
152 1.28 enami struct scsipi_xfer *sc_xfer = xfer->cmd;
153 1.28 enami
154 1.32 thorpej callout_stop(&chp->ch_callout);
155 1.28 enami /* remove this command from xfer queue */
156 1.28 enami wdc_free_xfer(chp, xfer);
157 1.28 enami sc_xfer->xs_status |= XS_STS_DONE;
158 1.28 enami sc_xfer->error = XS_DRIVER_STUFFUP;
159 1.28 enami scsipi_done(sc_xfer);
160 1.28 enami }
161 1.28 enami
162 1.2 bouyer int
163 1.2 bouyer wdc_atapi_get_params(ab_link, drive, flags, id)
164 1.2 bouyer struct scsipi_link *ab_link;
165 1.2 bouyer u_int8_t drive;
166 1.2 bouyer int flags;
167 1.2 bouyer struct ataparams *id;
168 1.2 bouyer {
169 1.2 bouyer struct wdc_softc *wdc = (void*)ab_link->adapter_softc;
170 1.2 bouyer struct channel_softc *chp =
171 1.10 drochner wdc->channels[ab_link->scsipi_atapi.channel];
172 1.2 bouyer struct wdc_command wdc_c;
173 1.2 bouyer
174 1.2 bouyer /* if no ATAPI device detected at wdc attach time, skip */
175 1.2 bouyer /*
176 1.2 bouyer * XXX this will break scsireprobe if this is of any interest for
177 1.2 bouyer * ATAPI devices one day.
178 1.2 bouyer */
179 1.2 bouyer if ((chp->ch_drive[drive].drive_flags & DRIVE_ATAPI) == 0) {
180 1.2 bouyer WDCDEBUG_PRINT(("wdc_atapi_get_params: drive %d not present\n",
181 1.2 bouyer drive), DEBUG_PROBE);
182 1.2 bouyer return -1;
183 1.2 bouyer }
184 1.2 bouyer memset(&wdc_c, 0, sizeof(struct wdc_command));
185 1.2 bouyer wdc_c.r_command = ATAPI_SOFT_RESET;
186 1.2 bouyer wdc_c.r_st_bmask = 0;
187 1.2 bouyer wdc_c.r_st_pmask = 0;
188 1.2 bouyer wdc_c.flags = AT_POLL;
189 1.2 bouyer wdc_c.timeout = WDC_RESET_WAIT;
190 1.2 bouyer if (wdc_exec_command(&chp->ch_drive[drive], &wdc_c) != WDC_COMPLETE) {
191 1.2 bouyer printf("wdc_atapi_get_params: ATAPI_SOFT_RESET failed for"
192 1.2 bouyer " drive %s:%d:%d: driver failed\n",
193 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, drive);
194 1.2 bouyer panic("wdc_atapi_get_params");
195 1.2 bouyer }
196 1.2 bouyer if (wdc_c.flags & (AT_ERROR | AT_TIMEOU | AT_DF)) {
197 1.2 bouyer WDCDEBUG_PRINT(("wdc_atapi_get_params: ATAPI_SOFT_RESET "
198 1.2 bouyer "failed for drive %s:%d:%d: error 0x%x\n",
199 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, drive,
200 1.2 bouyer wdc_c.r_error), DEBUG_PROBE);
201 1.2 bouyer return -1;
202 1.2 bouyer }
203 1.2 bouyer chp->ch_drive[drive].state = 0;
204 1.2 bouyer
205 1.2 bouyer bus_space_read_1(chp->cmd_iot, chp->cmd_ioh, wd_status);
206 1.2 bouyer
207 1.2 bouyer /* Some ATAPI devices need a bit more time after software reset. */
208 1.2 bouyer delay(5000);
209 1.2 bouyer if (ata_get_params(&chp->ch_drive[drive], AT_POLL, id) != 0) {
210 1.2 bouyer WDCDEBUG_PRINT(("wdc_atapi_get_params: ATAPI_IDENTIFY_DEVICE "
211 1.2 bouyer "failed for drive %s:%d:%d: error 0x%x\n",
212 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, drive,
213 1.2 bouyer wdc_c.r_error), DEBUG_PROBE);
214 1.2 bouyer return -1;
215 1.2 bouyer }
216 1.2 bouyer return COMPLETE;
217 1.2 bouyer }
218 1.2 bouyer
219 1.33 bouyer void
220 1.33 bouyer wdc_atapi_probedev(atapi, target)
221 1.33 bouyer struct atapibus_softc *atapi;
222 1.33 bouyer int target;
223 1.33 bouyer {
224 1.33 bouyer struct scsipi_link *sc_link;
225 1.33 bouyer struct scsipibus_attach_args sa;
226 1.33 bouyer struct ataparams ids;
227 1.33 bouyer struct ataparams *id = &ids;
228 1.33 bouyer struct ata_drive_datas *drvp = &atapi->sc_drvs[target];
229 1.33 bouyer char serial_number[21], model[41], firmware_revision[9];
230 1.33 bouyer
231 1.33 bouyer if (atapi->sc_link[target])
232 1.33 bouyer return;
233 1.33 bouyer if (wdc_atapi_get_params(atapi->adapter_link, target,
234 1.33 bouyer XS_CTL_POLL|XS_CTL_NOSLEEP, id) == COMPLETE) {
235 1.33 bouyer #ifdef ATAPI_DEBUG_PROBE
236 1.33 bouyer printf("%s drive %d: cmdsz 0x%x drqtype 0x%x\n",
237 1.33 bouyer atapi->sc_dev.dv_xname, target,
238 1.33 bouyer id->atap_config & ATAPI_CFG_CMD_MASK,
239 1.33 bouyer id->atap_config & ATAPI_CFG_DRQ_MASK);
240 1.33 bouyer #endif
241 1.33 bouyer /*
242 1.33 bouyer * Allocate a device link and try and attach
243 1.33 bouyer * a driver to this device. If we fail, free
244 1.33 bouyer * the link.
245 1.33 bouyer */
246 1.33 bouyer sc_link = malloc(sizeof(*sc_link), M_DEVBUF, M_NOWAIT);
247 1.33 bouyer if (sc_link == NULL) {
248 1.33 bouyer printf("%s: can't allocate link for drive %d\n",
249 1.33 bouyer atapi->sc_dev.dv_xname, target);
250 1.33 bouyer return;
251 1.33 bouyer }
252 1.33 bouyer /* fill in the link (IDE-specific part) */
253 1.33 bouyer *sc_link = *atapi->adapter_link;
254 1.33 bouyer if ((id->atap_config & ATAPI_CFG_CMD_MASK) == ATAPI_CFG_CMD_16)
255 1.33 bouyer sc_link->scsipi_atapi.cap |= ACAP_LEN;
256 1.33 bouyer sc_link->scsipi_atapi.cap |=
257 1.33 bouyer (id->atap_config & ATAPI_CFG_DRQ_MASK);
258 1.33 bouyer sa.sa_sc_link = sc_link;
259 1.33 bouyer sa.sa_inqbuf.type = ATAPI_CFG_TYPE(id->atap_config);
260 1.33 bouyer sa.sa_inqbuf.removable =
261 1.33 bouyer id->atap_config & ATAPI_CFG_REMOV ? T_REMOV : T_FIXED;
262 1.33 bouyer if (sa.sa_inqbuf.removable)
263 1.33 bouyer sc_link->flags |= SDEV_REMOVABLE;
264 1.33 bouyer scsipi_strvis(model, 40, id->atap_model, 40);
265 1.33 bouyer scsipi_strvis(serial_number, 20, id->atap_serial, 20);
266 1.33 bouyer scsipi_strvis(firmware_revision, 8, id->atap_revision, 8);
267 1.33 bouyer sa.sa_inqbuf.vendor = model;
268 1.33 bouyer sa.sa_inqbuf.product = serial_number;
269 1.33 bouyer sa.sa_inqbuf.revision = firmware_revision;
270 1.33 bouyer sa.sa_inqptr = NULL;
271 1.33 bouyer drvp->drv_softc = atapi_probedev(atapi, target, sc_link, &sa);
272 1.33 bouyer if (drvp->drv_softc) {
273 1.33 bouyer wdc_probe_caps(drvp);
274 1.33 bouyer return;
275 1.33 bouyer }
276 1.33 bouyer }
277 1.33 bouyer }
278 1.33 bouyer
279 1.2 bouyer int
280 1.2 bouyer wdc_atapi_send_cmd(sc_xfer)
281 1.2 bouyer struct scsipi_xfer *sc_xfer;
282 1.2 bouyer {
283 1.12 bouyer struct wdc_softc *wdc = (void*)sc_xfer->sc_link->adapter_softc;
284 1.2 bouyer struct wdc_xfer *xfer;
285 1.27 thorpej int flags = sc_xfer->xs_control;
286 1.2 bouyer int channel = sc_xfer->sc_link->scsipi_atapi.channel;
287 1.2 bouyer int drive = sc_xfer->sc_link->scsipi_atapi.drive;
288 1.2 bouyer int s, ret;
289 1.2 bouyer
290 1.5 bouyer WDCDEBUG_PRINT(("wdc_atapi_send_cmd %s:%d:%d\n",
291 1.5 bouyer wdc->sc_dev.dv_xname, channel, drive), DEBUG_XFERS);
292 1.31 enami
293 1.31 enami if ((wdc->sc_dev.dv_flags & DVF_ACTIVE) == 0) {
294 1.31 enami sc_xfer->xs_status |= XS_STS_DONE;
295 1.31 enami sc_xfer->error = XS_DRIVER_STUFFUP;
296 1.31 enami scsipi_done(sc_xfer);
297 1.31 enami if ((sc_xfer->xs_control & XS_CTL_POLL) == 0)
298 1.31 enami return (SUCCESSFULLY_QUEUED);
299 1.31 enami else
300 1.31 enami return (COMPLETE);
301 1.31 enami }
302 1.2 bouyer
303 1.27 thorpej xfer = wdc_get_xfer((flags & XS_CTL_NOSLEEP) ?
304 1.27 thorpej WDC_NOSLEEP : WDC_CANSLEEP);
305 1.2 bouyer if (xfer == NULL) {
306 1.2 bouyer return TRY_AGAIN_LATER;
307 1.2 bouyer }
308 1.27 thorpej if (sc_xfer->xs_control & XS_CTL_POLL)
309 1.2 bouyer xfer->c_flags |= C_POLL;
310 1.2 bouyer xfer->drive = drive;
311 1.2 bouyer xfer->c_flags |= C_ATAPI;
312 1.2 bouyer xfer->cmd = sc_xfer;
313 1.2 bouyer xfer->databuf = sc_xfer->data;
314 1.2 bouyer xfer->c_bcount = sc_xfer->datalen;
315 1.2 bouyer xfer->c_start = wdc_atapi_start;
316 1.2 bouyer xfer->c_intr = wdc_atapi_intr;
317 1.28 enami xfer->c_kill_xfer = wdc_atapi_kill_xfer;
318 1.2 bouyer s = splbio();
319 1.10 drochner wdc_exec_xfer(wdc->channels[channel], xfer);
320 1.2 bouyer #ifdef DIAGNOSTIC
321 1.27 thorpej if ((sc_xfer->xs_control & XS_CTL_POLL) != 0 &&
322 1.27 thorpej (sc_xfer->xs_status & XS_STS_DONE) == 0)
323 1.2 bouyer panic("wdc_atapi_send_cmd: polled command not done");
324 1.2 bouyer #endif
325 1.27 thorpej ret = (sc_xfer->xs_status & XS_STS_DONE) ?
326 1.27 thorpej COMPLETE : SUCCESSFULLY_QUEUED;
327 1.2 bouyer splx(s);
328 1.2 bouyer return ret;
329 1.2 bouyer }
330 1.2 bouyer
331 1.2 bouyer void
332 1.2 bouyer wdc_atapi_start(chp, xfer)
333 1.2 bouyer struct channel_softc *chp;
334 1.2 bouyer struct wdc_xfer *xfer;
335 1.2 bouyer {
336 1.2 bouyer struct scsipi_xfer *sc_xfer = xfer->cmd;
337 1.2 bouyer struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
338 1.2 bouyer
339 1.5 bouyer WDCDEBUG_PRINT(("wdc_atapi_start %s:%d:%d, scsi flags 0x%x \n",
340 1.5 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, drvp->drive,
341 1.27 thorpej sc_xfer->xs_control), DEBUG_XFERS);
342 1.19 bouyer /* Adjust C_DMA, it may have changed if we are requesting sense */
343 1.19 bouyer if ((drvp->drive_flags & (DRIVE_DMA | DRIVE_UDMA)) &&
344 1.30 bouyer (sc_xfer->datalen > 0 || (xfer->c_flags & C_SENSE))) {
345 1.30 bouyer if (drvp->n_xfers <= NXFER)
346 1.30 bouyer drvp->n_xfers++;
347 1.19 bouyer xfer->c_flags |= C_DMA;
348 1.30 bouyer } else {
349 1.19 bouyer xfer->c_flags &= ~C_DMA;
350 1.30 bouyer }
351 1.24 bouyer /* start timeout machinery */
352 1.27 thorpej if ((sc_xfer->xs_control & XS_CTL_POLL) == 0)
353 1.32 thorpej callout_reset(&chp->ch_callout, sc_xfer->timeout * hz / 1000,
354 1.32 thorpej wdctimeout, chp);
355 1.2 bouyer /* Do control operations specially. */
356 1.2 bouyer if (drvp->state < READY) {
357 1.33 bouyer if (drvp->state != RESET) {
358 1.2 bouyer printf("%s:%d:%d: bad state %d in wdc_atapi_start\n",
359 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel,
360 1.2 bouyer xfer->drive, drvp->state);
361 1.2 bouyer panic("wdc_atapi_start: bad state");
362 1.2 bouyer }
363 1.33 bouyer drvp->state = PIOMODE;
364 1.20 bouyer wdc_atapi_ctrl(chp, xfer, 0);
365 1.2 bouyer return;
366 1.2 bouyer }
367 1.2 bouyer bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, wd_sdh,
368 1.2 bouyer WDSD_IBM | (xfer->drive << 4));
369 1.2 bouyer if (wait_for_unbusy(chp, ATAPI_DELAY) < 0) {
370 1.2 bouyer printf("wdc_atapi_start: not ready, st = %02x\n",
371 1.2 bouyer chp->ch_status);
372 1.3 bouyer sc_xfer->error = XS_TIMEOUT;
373 1.2 bouyer wdc_atapi_reset(chp, xfer);
374 1.2 bouyer return;
375 1.2 bouyer }
376 1.2 bouyer
377 1.2 bouyer /*
378 1.2 bouyer * Even with WDCS_ERR, the device should accept a command packet
379 1.2 bouyer * Limit length to what can be stuffed into the cylinder register
380 1.2 bouyer * (16 bits). Some CD-ROMs seem to interpret '0' as 65536,
381 1.2 bouyer * but not all devices do that and it's not obvious from the
382 1.2 bouyer * ATAPI spec that that behaviour should be expected. If more
383 1.2 bouyer * data is necessary, multiple data transfer phases will be done.
384 1.2 bouyer */
385 1.5 bouyer
386 1.2 bouyer wdccommand(chp, xfer->drive, ATAPI_PKT_CMD,
387 1.29 bouyer xfer->c_bcount <= 0xffff ? xfer->c_bcount : 0xffff,
388 1.2 bouyer 0, 0, 0,
389 1.2 bouyer (xfer->c_flags & C_DMA) ? ATAPI_PKT_CMD_FTRE_DMA : 0);
390 1.2 bouyer
391 1.2 bouyer /*
392 1.2 bouyer * If there is no interrupt for CMD input, busy-wait for it (done in
393 1.2 bouyer * the interrupt routine. If it is a polled command, call the interrupt
394 1.2 bouyer * routine until command is done.
395 1.2 bouyer */
396 1.21 bouyer if ((sc_xfer->sc_link->scsipi_atapi.cap & ATAPI_CFG_DRQ_MASK) !=
397 1.27 thorpej ATAPI_CFG_IRQ_DRQ || (sc_xfer->xs_control & XS_CTL_POLL)) {
398 1.2 bouyer /* Wait for at last 400ns for status bit to be valid */
399 1.20 bouyer DELAY(1);
400 1.20 bouyer wdc_atapi_intr(chp, xfer, 0);
401 1.21 bouyer } else {
402 1.21 bouyer chp->ch_flags |= WDCF_IRQ_WAIT;
403 1.2 bouyer }
404 1.27 thorpej if (sc_xfer->xs_control & XS_CTL_POLL) {
405 1.27 thorpej while ((sc_xfer->xs_status & XS_STS_DONE) == 0) {
406 1.2 bouyer /* Wait for at last 400ns for status bit to be valid */
407 1.20 bouyer DELAY(1);
408 1.33 bouyer if (chp->ch_flags & WDCF_DMA_WAIT) {
409 1.33 bouyer wdc_dmawait(chp, xfer, sc_xfer->timeout);
410 1.33 bouyer chp->ch_flags &= ~WDCF_DMA_WAIT;
411 1.33 bouyer }
412 1.20 bouyer wdc_atapi_intr(chp, xfer, 0);
413 1.2 bouyer }
414 1.2 bouyer }
415 1.2 bouyer }
416 1.2 bouyer
417 1.2 bouyer int
418 1.20 bouyer wdc_atapi_intr(chp, xfer, irq)
419 1.2 bouyer struct channel_softc *chp;
420 1.2 bouyer struct wdc_xfer *xfer;
421 1.20 bouyer int irq;
422 1.2 bouyer {
423 1.2 bouyer struct scsipi_xfer *sc_xfer = xfer->cmd;
424 1.2 bouyer struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
425 1.2 bouyer int len, phase, i, retries=0;
426 1.33 bouyer int ire;
427 1.2 bouyer int dma_flags = 0;
428 1.8 bouyer struct scsipi_generic _cmd_reqsense;
429 1.8 bouyer struct scsipi_sense *cmd_reqsense =
430 1.8 bouyer (struct scsipi_sense *)&_cmd_reqsense;
431 1.8 bouyer void *cmd;
432 1.2 bouyer
433 1.5 bouyer WDCDEBUG_PRINT(("wdc_atapi_intr %s:%d:%d\n",
434 1.5 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, drvp->drive), DEBUG_INTR);
435 1.2 bouyer
436 1.2 bouyer /* Is it not a transfer, but a control operation? */
437 1.2 bouyer if (drvp->state < READY) {
438 1.2 bouyer printf("%s:%d:%d: bad state %d in wdc_atapi_intr\n",
439 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
440 1.2 bouyer drvp->state);
441 1.2 bouyer panic("wdc_atapi_intr: bad state\n");
442 1.2 bouyer }
443 1.24 bouyer /*
444 1.24 bouyer * If we missed an interrupt in a PIO transfer, reset and restart.
445 1.24 bouyer * Don't try to continue transfer, we may have missed cycles.
446 1.24 bouyer */
447 1.24 bouyer if ((xfer->c_flags & (C_TIMEOU | C_DMA)) == C_TIMEOU) {
448 1.24 bouyer sc_xfer->error = XS_TIMEOUT;
449 1.24 bouyer wdc_atapi_reset(chp, xfer);
450 1.25 bouyer return 1;
451 1.24 bouyer }
452 1.24 bouyer
453 1.2 bouyer /* Ack interrupt done in wait_for_unbusy */
454 1.2 bouyer bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, wd_sdh,
455 1.2 bouyer WDSD_IBM | (xfer->drive << 4));
456 1.19 bouyer if (wait_for_unbusy(chp,
457 1.20 bouyer (irq == 0) ? sc_xfer->timeout : 0) != 0) {
458 1.20 bouyer if (irq && (xfer->c_flags & C_TIMEOU) == 0)
459 1.19 bouyer return 0; /* IRQ was not for us */
460 1.16 bouyer printf("%s:%d:%d: device timeout, c_bcount=%d, c_skip=%d\n",
461 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
462 1.2 bouyer xfer->c_bcount, xfer->c_skip);
463 1.33 bouyer if (xfer->c_flags & C_DMA) {
464 1.30 bouyer ata_dmaerr(drvp);
465 1.33 bouyer }
466 1.3 bouyer sc_xfer->error = XS_TIMEOUT;
467 1.2 bouyer wdc_atapi_reset(chp, xfer);
468 1.2 bouyer return 1;
469 1.2 bouyer }
470 1.19 bouyer /* If we missed an IRQ and were using DMA, flag it as a DMA error */
471 1.33 bouyer if ((xfer->c_flags & C_TIMEOU) && (xfer->c_flags & C_DMA)) {
472 1.30 bouyer ata_dmaerr(drvp);
473 1.33 bouyer }
474 1.8 bouyer /*
475 1.8 bouyer * if the request sense command was aborted, report the short sense
476 1.8 bouyer * previously recorded, else continue normal processing
477 1.8 bouyer */
478 1.8 bouyer
479 1.8 bouyer if ((xfer->c_flags & C_SENSE) != 0 &&
480 1.8 bouyer (chp->ch_status & WDCS_ERR) != 0 &&
481 1.2 bouyer (chp->ch_error & WDCE_ABRT) != 0) {
482 1.8 bouyer WDCDEBUG_PRINT(("wdc_atapi_intr: request_sense aborted, "
483 1.8 bouyer "calling wdc_atapi_done(), sense 0x%x\n",
484 1.8 bouyer sc_xfer->sense.atapi_sense), DEBUG_INTR);
485 1.2 bouyer wdc_atapi_done(chp, xfer);
486 1.2 bouyer return 1;
487 1.2 bouyer }
488 1.2 bouyer
489 1.33 bouyer if (xfer->c_flags & C_DMA)
490 1.27 thorpej dma_flags = ((sc_xfer->xs_control & XS_CTL_DATA_IN) ||
491 1.19 bouyer (xfer->c_flags & C_SENSE)) ? WDC_DMA_READ : 0;
492 1.2 bouyer again:
493 1.2 bouyer len = bus_space_read_1(chp->cmd_iot, chp->cmd_ioh, wd_cyl_lo) +
494 1.2 bouyer 256 * bus_space_read_1(chp->cmd_iot, chp->cmd_ioh, wd_cyl_hi);
495 1.2 bouyer ire = bus_space_read_1(chp->cmd_iot, chp->cmd_ioh, wd_ireason);
496 1.2 bouyer phase = (ire & (WDCI_CMD | WDCI_IN)) | (chp->ch_status & WDCS_DRQ);
497 1.2 bouyer WDCDEBUG_PRINT(("wdc_atapi_intr: c_bcount %d len %d st 0x%x err 0x%x "
498 1.2 bouyer "ire 0x%x :", xfer->c_bcount,
499 1.2 bouyer len, chp->ch_status, chp->ch_error, ire), DEBUG_INTR);
500 1.2 bouyer
501 1.2 bouyer switch (phase) {
502 1.2 bouyer case PHASE_CMDOUT:
503 1.8 bouyer if (xfer->c_flags & C_SENSE) {
504 1.8 bouyer memset(cmd_reqsense, 0, sizeof(struct scsipi_generic));
505 1.8 bouyer cmd_reqsense->opcode = REQUEST_SENSE;
506 1.8 bouyer cmd_reqsense->length = xfer->c_bcount;
507 1.8 bouyer cmd = cmd_reqsense;
508 1.8 bouyer } else {
509 1.8 bouyer cmd = sc_xfer->cmd;
510 1.8 bouyer }
511 1.2 bouyer WDCDEBUG_PRINT(("PHASE_CMDOUT\n"), DEBUG_INTR);
512 1.2 bouyer /* Init the DMA channel if necessary */
513 1.2 bouyer if (xfer->c_flags & C_DMA) {
514 1.2 bouyer if ((*chp->wdc->dma_init)(chp->wdc->dma_arg,
515 1.2 bouyer chp->channel, xfer->drive,
516 1.8 bouyer xfer->databuf, xfer->c_bcount, dma_flags) != 0) {
517 1.2 bouyer sc_xfer->error = XS_DRIVER_STUFFUP;
518 1.2 bouyer break;
519 1.2 bouyer }
520 1.2 bouyer }
521 1.2 bouyer /* send packet command */
522 1.2 bouyer /* Commands are 12 or 16 bytes long. It's 32-bit aligned */
523 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM)) {
524 1.2 bouyer if (drvp->drive_flags & DRIVE_CAP32) {
525 1.2 bouyer bus_space_write_multi_4(chp->data32iot,
526 1.2 bouyer chp->data32ioh, 0,
527 1.8 bouyer (u_int32_t *)cmd,
528 1.2 bouyer sc_xfer->cmdlen >> 2);
529 1.2 bouyer } else {
530 1.2 bouyer bus_space_write_multi_2(chp->cmd_iot,
531 1.2 bouyer chp->cmd_ioh, wd_data,
532 1.8 bouyer (u_int16_t *)cmd,
533 1.2 bouyer sc_xfer->cmdlen >> 1);
534 1.2 bouyer }
535 1.2 bouyer } else {
536 1.2 bouyer if (drvp->drive_flags & DRIVE_CAP32) {
537 1.2 bouyer bus_space_write_multi_stream_4(chp->data32iot,
538 1.2 bouyer chp->data32ioh, 0,
539 1.8 bouyer (u_int32_t *)cmd,
540 1.2 bouyer sc_xfer->cmdlen >> 2);
541 1.2 bouyer } else {
542 1.2 bouyer bus_space_write_multi_stream_2(chp->cmd_iot,
543 1.2 bouyer chp->cmd_ioh, wd_data,
544 1.8 bouyer (u_int16_t *)cmd,
545 1.2 bouyer sc_xfer->cmdlen >> 1);
546 1.2 bouyer }
547 1.2 bouyer }
548 1.2 bouyer /* Start the DMA channel if necessary */
549 1.2 bouyer if (xfer->c_flags & C_DMA) {
550 1.2 bouyer (*chp->wdc->dma_start)(chp->wdc->dma_arg,
551 1.33 bouyer chp->channel, xfer->drive);
552 1.33 bouyer chp->ch_flags |= WDCF_DMA_WAIT;
553 1.2 bouyer }
554 1.2 bouyer
555 1.27 thorpej if ((sc_xfer->xs_control & XS_CTL_POLL) == 0) {
556 1.2 bouyer chp->ch_flags |= WDCF_IRQ_WAIT;
557 1.2 bouyer }
558 1.2 bouyer return 1;
559 1.2 bouyer
560 1.2 bouyer case PHASE_DATAOUT:
561 1.2 bouyer /* write data */
562 1.2 bouyer WDCDEBUG_PRINT(("PHASE_DATAOUT\n"), DEBUG_INTR);
563 1.27 thorpej if ((sc_xfer->xs_control & XS_CTL_DATA_OUT) == 0 ||
564 1.2 bouyer (xfer->c_flags & C_DMA) != 0) {
565 1.15 bouyer printf("wdc_atapi_intr: bad data phase DATAOUT\n");
566 1.2 bouyer if (xfer->c_flags & C_DMA) {
567 1.30 bouyer ata_dmaerr(drvp);
568 1.2 bouyer }
569 1.3 bouyer sc_xfer->error = XS_TIMEOUT;
570 1.2 bouyer wdc_atapi_reset(chp, xfer);
571 1.2 bouyer return 1;
572 1.2 bouyer }
573 1.2 bouyer if (xfer->c_bcount < len) {
574 1.2 bouyer printf("wdc_atapi_intr: warning: write only "
575 1.2 bouyer "%d of %d requested bytes\n", xfer->c_bcount, len);
576 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM)) {
577 1.2 bouyer bus_space_write_multi_2(chp->cmd_iot,
578 1.2 bouyer chp->cmd_ioh, wd_data,
579 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
580 1.14 thorpej xfer->c_skip),
581 1.2 bouyer xfer->c_bcount >> 1);
582 1.2 bouyer } else {
583 1.2 bouyer bus_space_write_multi_stream_2(chp->cmd_iot,
584 1.2 bouyer chp->cmd_ioh, wd_data,
585 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
586 1.14 thorpej xfer->c_skip),
587 1.2 bouyer xfer->c_bcount >> 1);
588 1.2 bouyer }
589 1.2 bouyer for (i = xfer->c_bcount; i < len; i += 2)
590 1.2 bouyer bus_space_write_2(chp->cmd_iot, chp->cmd_ioh,
591 1.2 bouyer wd_data, 0);
592 1.2 bouyer xfer->c_skip += xfer->c_bcount;
593 1.2 bouyer xfer->c_bcount = 0;
594 1.2 bouyer } else {
595 1.2 bouyer if (drvp->drive_flags & DRIVE_CAP32) {
596 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM))
597 1.2 bouyer bus_space_write_multi_4(chp->data32iot,
598 1.2 bouyer chp->data32ioh, 0,
599 1.14 thorpej (u_int32_t *)((char *)xfer->databuf +
600 1.14 thorpej xfer->c_skip),
601 1.13 augustss len >> 2);
602 1.2 bouyer else
603 1.12 bouyer bus_space_write_multi_stream_4(chp->data32iot,
604 1.12 bouyer chp->data32ioh, wd_data,
605 1.14 thorpej (u_int32_t *)((char *)xfer->databuf +
606 1.14 thorpej xfer->c_skip),
607 1.13 augustss len >> 2);
608 1.2 bouyer
609 1.2 bouyer xfer->c_skip += len & 0xfffffffc;
610 1.2 bouyer xfer->c_bcount -= len & 0xfffffffc;
611 1.2 bouyer len = len & 0x03;
612 1.2 bouyer }
613 1.2 bouyer if (len > 0) {
614 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM))
615 1.2 bouyer bus_space_write_multi_2(chp->cmd_iot,
616 1.2 bouyer chp->cmd_ioh, wd_data,
617 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
618 1.14 thorpej xfer->c_skip),
619 1.13 augustss len >> 1);
620 1.2 bouyer else
621 1.2 bouyer bus_space_write_multi_stream_2(chp->cmd_iot,
622 1.2 bouyer chp->cmd_ioh, wd_data,
623 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
624 1.14 thorpej xfer->c_skip),
625 1.13 augustss len >> 1);
626 1.2 bouyer xfer->c_skip += len;
627 1.2 bouyer xfer->c_bcount -= len;
628 1.2 bouyer }
629 1.2 bouyer }
630 1.27 thorpej if ((sc_xfer->xs_control & XS_CTL_POLL) == 0) {
631 1.2 bouyer chp->ch_flags |= WDCF_IRQ_WAIT;
632 1.2 bouyer }
633 1.2 bouyer return 1;
634 1.2 bouyer
635 1.2 bouyer case PHASE_DATAIN:
636 1.2 bouyer /* Read data */
637 1.2 bouyer WDCDEBUG_PRINT(("PHASE_DATAIN\n"), DEBUG_INTR);
638 1.27 thorpej if (((sc_xfer->xs_control & XS_CTL_DATA_IN) == 0 &&
639 1.8 bouyer (xfer->c_flags & C_SENSE) == 0) ||
640 1.2 bouyer (xfer->c_flags & C_DMA) != 0) {
641 1.15 bouyer printf("wdc_atapi_intr: bad data phase DATAIN\n");
642 1.2 bouyer if (xfer->c_flags & C_DMA) {
643 1.30 bouyer ata_dmaerr(drvp);
644 1.2 bouyer }
645 1.3 bouyer sc_xfer->error = XS_TIMEOUT;
646 1.2 bouyer wdc_atapi_reset(chp, xfer);
647 1.2 bouyer return 1;
648 1.2 bouyer }
649 1.2 bouyer if (xfer->c_bcount < len) {
650 1.2 bouyer printf("wdc_atapi_intr: warning: reading only "
651 1.2 bouyer "%d of %d bytes\n", xfer->c_bcount, len);
652 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM)) {
653 1.2 bouyer bus_space_read_multi_2(chp->cmd_iot,
654 1.2 bouyer chp->cmd_ioh, wd_data,
655 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
656 1.14 thorpej xfer->c_skip),
657 1.13 augustss xfer->c_bcount >> 1);
658 1.2 bouyer } else {
659 1.2 bouyer bus_space_read_multi_stream_2(chp->cmd_iot,
660 1.2 bouyer chp->cmd_ioh, wd_data,
661 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
662 1.14 thorpej xfer->c_skip),
663 1.13 augustss xfer->c_bcount >> 1);
664 1.2 bouyer }
665 1.2 bouyer wdcbit_bucket(chp, len - xfer->c_bcount);
666 1.2 bouyer xfer->c_skip += xfer->c_bcount;
667 1.2 bouyer xfer->c_bcount = 0;
668 1.2 bouyer } else {
669 1.2 bouyer if (drvp->drive_flags & DRIVE_CAP32) {
670 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM))
671 1.2 bouyer bus_space_read_multi_4(chp->data32iot,
672 1.2 bouyer chp->data32ioh, 0,
673 1.14 thorpej (u_int32_t *)((char *)xfer->databuf +
674 1.14 thorpej xfer->c_skip),
675 1.13 augustss len >> 2);
676 1.2 bouyer else
677 1.12 bouyer bus_space_read_multi_stream_4(chp->data32iot,
678 1.12 bouyer chp->data32ioh, wd_data,
679 1.14 thorpej (u_int32_t *)((char *)xfer->databuf +
680 1.14 thorpej xfer->c_skip),
681 1.13 augustss len >> 2);
682 1.2 bouyer
683 1.2 bouyer xfer->c_skip += len & 0xfffffffc;
684 1.2 bouyer xfer->c_bcount -= len & 0xfffffffc;
685 1.2 bouyer len = len & 0x03;
686 1.2 bouyer }
687 1.2 bouyer if (len > 0) {
688 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_ATAPI_NOSTREAM))
689 1.2 bouyer bus_space_read_multi_2(chp->cmd_iot,
690 1.2 bouyer chp->cmd_ioh, wd_data,
691 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
692 1.14 thorpej xfer->c_skip),
693 1.13 augustss len >> 1);
694 1.2 bouyer else
695 1.2 bouyer bus_space_read_multi_stream_2(chp->cmd_iot,
696 1.2 bouyer chp->cmd_ioh, wd_data,
697 1.14 thorpej (u_int16_t *)((char *)xfer->databuf +
698 1.14 thorpej xfer->c_skip),
699 1.13 augustss len >> 1);
700 1.2 bouyer xfer->c_skip += len;
701 1.2 bouyer xfer->c_bcount -=len;
702 1.2 bouyer }
703 1.2 bouyer }
704 1.27 thorpej if ((sc_xfer->xs_control & XS_CTL_POLL) == 0) {
705 1.2 bouyer chp->ch_flags |= WDCF_IRQ_WAIT;
706 1.2 bouyer }
707 1.2 bouyer return 1;
708 1.2 bouyer
709 1.2 bouyer case PHASE_ABORTED:
710 1.2 bouyer case PHASE_COMPLETED:
711 1.2 bouyer WDCDEBUG_PRINT(("PHASE_COMPLETED\n"), DEBUG_INTR);
712 1.2 bouyer /* turn off DMA channel */
713 1.2 bouyer if (xfer->c_flags & C_DMA) {
714 1.20 bouyer if (xfer->c_flags & C_SENSE)
715 1.20 bouyer xfer->c_bcount -=
716 1.20 bouyer sizeof(sc_xfer->sense.scsi_sense);
717 1.20 bouyer else
718 1.20 bouyer xfer->c_bcount -= sc_xfer->datalen;
719 1.2 bouyer }
720 1.8 bouyer if (xfer->c_flags & C_SENSE) {
721 1.33 bouyer if ((chp->ch_status & WDCS_ERR) ||
722 1.33 bouyer (chp->wdc->dma_status &
723 1.33 bouyer (WDC_DMAST_NOIRQ | WDC_DMAST_ERR))) {
724 1.8 bouyer /*
725 1.8 bouyer * request sense failed ! it's not suppossed
726 1.8 bouyer * to be possible
727 1.8 bouyer */
728 1.33 bouyer if (xfer->c_flags & C_DMA) {
729 1.30 bouyer ata_dmaerr(drvp);
730 1.33 bouyer }
731 1.17 bouyer sc_xfer->error = XS_RESET;
732 1.17 bouyer wdc_atapi_reset(chp, xfer);
733 1.17 bouyer return (1);
734 1.17 bouyer } else if (xfer->c_bcount <
735 1.17 bouyer sizeof(sc_xfer->sense.scsi_sense)) {
736 1.8 bouyer /* use the sense we just read */
737 1.8 bouyer sc_xfer->error = XS_SENSE;
738 1.17 bouyer } else {
739 1.17 bouyer /*
740 1.17 bouyer * command completed, but no data was read.
741 1.17 bouyer * use the short sense we saved previsouly.
742 1.17 bouyer */
743 1.17 bouyer sc_xfer->error = XS_SHORTSENSE;
744 1.8 bouyer }
745 1.8 bouyer } else {
746 1.23 perry sc_xfer->resid = xfer->c_bcount;
747 1.8 bouyer if (chp->ch_status & WDCS_ERR) {
748 1.8 bouyer /* save the short sense */
749 1.8 bouyer sc_xfer->error = XS_SHORTSENSE;
750 1.8 bouyer sc_xfer->sense.atapi_sense = chp->ch_error;
751 1.12 bouyer if ((sc_xfer->sc_link->quirks &
752 1.12 bouyer ADEV_NOSENSE) == 0) {
753 1.12 bouyer /*
754 1.12 bouyer * let the driver issue a
755 1.12 bouyer * 'request sense'
756 1.12 bouyer */
757 1.12 bouyer xfer->databuf = &sc_xfer->sense;
758 1.12 bouyer xfer->c_bcount =
759 1.12 bouyer sizeof(sc_xfer->sense.scsi_sense);
760 1.23 perry xfer->c_skip = 0;
761 1.12 bouyer xfer->c_flags |= C_SENSE;
762 1.32 thorpej callout_stop(&chp->ch_callout);
763 1.12 bouyer wdc_atapi_start(chp, xfer);
764 1.12 bouyer return 1;
765 1.12 bouyer }
766 1.33 bouyer } else if (chp->wdc->dma_status &
767 1.33 bouyer (WDC_DMAST_NOIRQ | WDC_DMAST_ERR)) {
768 1.30 bouyer ata_dmaerr(drvp);
769 1.16 bouyer sc_xfer->error = XS_RESET;
770 1.16 bouyer wdc_atapi_reset(chp, xfer);
771 1.16 bouyer return (1);
772 1.8 bouyer }
773 1.2 bouyer }
774 1.7 bouyer if (xfer->c_bcount != 0) {
775 1.7 bouyer WDCDEBUG_PRINT(("wdc_atapi_intr: bcount value is "
776 1.7 bouyer "%d after io\n", xfer->c_bcount), DEBUG_XFERS);
777 1.7 bouyer }
778 1.2 bouyer #ifdef DIAGNOSTIC
779 1.7 bouyer if (xfer->c_bcount < 0) {
780 1.2 bouyer printf("wdc_atapi_intr warning: bcount value "
781 1.2 bouyer "is %d after io\n", xfer->c_bcount);
782 1.2 bouyer }
783 1.2 bouyer #endif
784 1.2 bouyer break;
785 1.2 bouyer
786 1.2 bouyer default:
787 1.2 bouyer if (++retries<500) {
788 1.2 bouyer DELAY(100);
789 1.2 bouyer chp->ch_status = bus_space_read_1(chp->cmd_iot,
790 1.2 bouyer chp->cmd_ioh, wd_status);
791 1.2 bouyer chp->ch_error = bus_space_read_1(chp->cmd_iot,
792 1.2 bouyer chp->cmd_ioh, wd_error);
793 1.2 bouyer goto again;
794 1.2 bouyer }
795 1.2 bouyer printf("wdc_atapi_intr: unknown phase 0x%x\n", phase);
796 1.2 bouyer if (chp->ch_status & WDCS_ERR) {
797 1.8 bouyer sc_xfer->error = XS_SHORTSENSE;
798 1.2 bouyer sc_xfer->sense.atapi_sense = chp->ch_error;
799 1.2 bouyer } else {
800 1.33 bouyer if (xfer->c_flags & C_DMA) {
801 1.30 bouyer ata_dmaerr(drvp);
802 1.33 bouyer }
803 1.16 bouyer sc_xfer->error = XS_RESET;
804 1.16 bouyer wdc_atapi_reset(chp, xfer);
805 1.16 bouyer return (1);
806 1.2 bouyer }
807 1.2 bouyer }
808 1.2 bouyer WDCDEBUG_PRINT(("wdc_atapi_intr: wdc_atapi_done() (end), error 0x%x "
809 1.2 bouyer "sense 0x%x\n", sc_xfer->error, sc_xfer->sense.atapi_sense),
810 1.2 bouyer DEBUG_INTR);
811 1.2 bouyer wdc_atapi_done(chp, xfer);
812 1.2 bouyer return (1);
813 1.2 bouyer }
814 1.2 bouyer
815 1.2 bouyer int
816 1.20 bouyer wdc_atapi_ctrl(chp, xfer, irq)
817 1.2 bouyer struct channel_softc *chp;
818 1.2 bouyer struct wdc_xfer *xfer;
819 1.20 bouyer int irq;
820 1.2 bouyer {
821 1.2 bouyer struct scsipi_xfer *sc_xfer = xfer->cmd;
822 1.2 bouyer struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
823 1.2 bouyer char *errstring = NULL;
824 1.20 bouyer int delay = (irq == 0) ? ATAPI_DELAY : 0;
825 1.2 bouyer
826 1.2 bouyer /* Ack interrupt done in wait_for_unbusy */
827 1.2 bouyer again:
828 1.5 bouyer WDCDEBUG_PRINT(("wdc_atapi_ctrl %s:%d:%d state %d\n",
829 1.5 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, drvp->drive, drvp->state),
830 1.4 bouyer DEBUG_INTR | DEBUG_FUNCS);
831 1.2 bouyer bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, wd_sdh,
832 1.2 bouyer WDSD_IBM | (xfer->drive << 4));
833 1.2 bouyer switch (drvp->state) {
834 1.2 bouyer case PIOMODE:
835 1.22 bouyer piomode:
836 1.2 bouyer /* Don't try to set mode if controller can't be adjusted */
837 1.2 bouyer if ((chp->wdc->cap & WDC_CAPABILITY_MODE) == 0)
838 1.2 bouyer goto ready;
839 1.6 bouyer /* Also don't try if the drive didn't report its mode */
840 1.6 bouyer if ((drvp->drive_flags & DRIVE_MODE) == 0)
841 1.6 bouyer goto ready;;
842 1.2 bouyer wdccommand(chp, drvp->drive, SET_FEATURES, 0, 0, 0,
843 1.2 bouyer 0x08 | drvp->PIO_mode, WDSF_SET_MODE);
844 1.2 bouyer drvp->state = PIOMODE_WAIT;
845 1.2 bouyer break;
846 1.2 bouyer case PIOMODE_WAIT:
847 1.2 bouyer errstring = "piomode";
848 1.19 bouyer if (wait_for_unbusy(chp, delay))
849 1.2 bouyer goto timeout;
850 1.22 bouyer if (chp->ch_status & WDCS_ERR) {
851 1.22 bouyer if (drvp->PIO_mode < 3) {
852 1.22 bouyer drvp->PIO_mode = 3;
853 1.22 bouyer goto piomode;
854 1.22 bouyer } else {
855 1.22 bouyer goto error;
856 1.22 bouyer }
857 1.22 bouyer }
858 1.2 bouyer /* fall through */
859 1.2 bouyer
860 1.2 bouyer case DMAMODE:
861 1.2 bouyer if (drvp->drive_flags & DRIVE_UDMA) {
862 1.2 bouyer wdccommand(chp, drvp->drive, SET_FEATURES, 0, 0, 0,
863 1.2 bouyer 0x40 | drvp->UDMA_mode, WDSF_SET_MODE);
864 1.2 bouyer } else if (drvp->drive_flags & DRIVE_DMA) {
865 1.2 bouyer wdccommand(chp, drvp->drive, SET_FEATURES, 0, 0, 0,
866 1.2 bouyer 0x20 | drvp->DMA_mode, WDSF_SET_MODE);
867 1.2 bouyer } else {
868 1.2 bouyer goto ready;
869 1.2 bouyer }
870 1.2 bouyer drvp->state = DMAMODE_WAIT;
871 1.2 bouyer break;
872 1.2 bouyer case DMAMODE_WAIT:
873 1.2 bouyer errstring = "dmamode";
874 1.19 bouyer if (wait_for_unbusy(chp, delay))
875 1.2 bouyer goto timeout;
876 1.2 bouyer if (chp->ch_status & WDCS_ERR)
877 1.2 bouyer goto error;
878 1.2 bouyer /* fall through */
879 1.2 bouyer
880 1.2 bouyer case READY:
881 1.2 bouyer ready:
882 1.2 bouyer drvp->state = READY;
883 1.2 bouyer xfer->c_intr = wdc_atapi_intr;
884 1.32 thorpej callout_stop(&chp->ch_callout);
885 1.2 bouyer wdc_atapi_start(chp, xfer);
886 1.2 bouyer return 1;
887 1.2 bouyer }
888 1.27 thorpej if ((sc_xfer->xs_control & XS_CTL_POLL) == 0) {
889 1.2 bouyer chp->ch_flags |= WDCF_IRQ_WAIT;
890 1.2 bouyer xfer->c_intr = wdc_atapi_ctrl;
891 1.2 bouyer } else {
892 1.2 bouyer goto again;
893 1.2 bouyer }
894 1.2 bouyer return 1;
895 1.2 bouyer
896 1.2 bouyer timeout:
897 1.20 bouyer if (irq && (xfer->c_flags & C_TIMEOU) == 0) {
898 1.2 bouyer return 0; /* IRQ was not for us */
899 1.2 bouyer }
900 1.2 bouyer printf("%s:%d:%d: %s timed out\n",
901 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive, errstring);
902 1.3 bouyer sc_xfer->error = XS_TIMEOUT;
903 1.2 bouyer wdc_atapi_reset(chp, xfer);
904 1.2 bouyer return 1;
905 1.2 bouyer error:
906 1.2 bouyer printf("%s:%d:%d: %s ",
907 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
908 1.2 bouyer errstring);
909 1.3 bouyer printf("error (0x%x)\n", chp->ch_error);
910 1.8 bouyer sc_xfer->error = XS_SHORTSENSE;
911 1.2 bouyer sc_xfer->sense.atapi_sense = chp->ch_error;
912 1.3 bouyer wdc_atapi_reset(chp, xfer);
913 1.2 bouyer return 1;
914 1.2 bouyer }
915 1.2 bouyer
916 1.2 bouyer void
917 1.2 bouyer wdc_atapi_done(chp, xfer)
918 1.2 bouyer struct channel_softc *chp;
919 1.2 bouyer struct wdc_xfer *xfer;
920 1.2 bouyer {
921 1.2 bouyer struct scsipi_xfer *sc_xfer = xfer->cmd;
922 1.2 bouyer
923 1.5 bouyer WDCDEBUG_PRINT(("wdc_atapi_done %s:%d:%d: flags 0x%x\n",
924 1.5 bouyer chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,
925 1.5 bouyer (u_int)xfer->c_flags), DEBUG_XFERS);
926 1.32 thorpej callout_stop(&chp->ch_callout);
927 1.2 bouyer /* remove this command from xfer queue */
928 1.2 bouyer wdc_free_xfer(chp, xfer);
929 1.27 thorpej sc_xfer->xs_status |= XS_STS_DONE;
930 1.11 bouyer
931 1.25 bouyer WDCDEBUG_PRINT(("wdc_atapi_done: scsipi_done\n"), DEBUG_XFERS);
932 1.25 bouyer scsipi_done(sc_xfer);
933 1.2 bouyer WDCDEBUG_PRINT(("wdcstart from wdc_atapi_done, flags 0x%x\n",
934 1.4 bouyer chp->ch_flags), DEBUG_XFERS);
935 1.10 drochner wdcstart(chp);
936 1.2 bouyer }
937 1.2 bouyer
938 1.2 bouyer void
939 1.2 bouyer wdc_atapi_reset(chp, xfer)
940 1.2 bouyer struct channel_softc *chp;
941 1.2 bouyer struct wdc_xfer *xfer;
942 1.2 bouyer {
943 1.2 bouyer struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];
944 1.2 bouyer struct scsipi_xfer *sc_xfer = xfer->cmd;
945 1.2 bouyer
946 1.2 bouyer wdccommandshort(chp, xfer->drive, ATAPI_SOFT_RESET);
947 1.2 bouyer drvp->state = 0;
948 1.2 bouyer if (wait_for_unbusy(chp, WDC_RESET_WAIT) != 0) {
949 1.2 bouyer printf("%s:%d:%d: reset failed\n",
950 1.2 bouyer chp->wdc->sc_dev.dv_xname, chp->channel,
951 1.2 bouyer xfer->drive);
952 1.2 bouyer sc_xfer->error = XS_SELTIMEOUT;
953 1.2 bouyer }
954 1.2 bouyer wdc_atapi_done(chp, xfer);
955 1.2 bouyer return;
956 1.2 bouyer }
957