Home | History | Annotate | Line # | Download | only in dts 
      1 // SPDX-License-Identifier: GPL-2.0+
      2 /*
      3  * Xilinx ZC770 XM010 board DTS
      4  *
      5  * Copyright (C) 2013-2018 Xilinx, Inc.
      6  */
      7 /dts-v1/;
      8 #include "zynq-7000.dtsi"
      9 
     10 / {
     11 	model = "Xilinx ZC770 XM010 board";
     12 	compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
     13 
     14 	aliases {
     15 		ethernet0 = &gem0;
     16 		i2c0 = &i2c0;
     17 		serial0 = &uart1;
     18 		spi1 = &spi1;
     19 	};
     20 
     21 	chosen {
     22 		bootargs = "";
     23 		stdout-path = "serial0:115200n8";
     24 	};
     25 
     26 	memory@0 {
     27 		device_type = "memory";
     28 		reg = <0x0 0x40000000>;
     29 	};
     30 
     31 	usb_phy0: phy0 {
     32 		compatible = "usb-nop-xceiv";
     33 		#phy-cells = <0>;
     34 	};
     35 };
     36 
     37 &can0 {
     38 	status = "okay";
     39 };
     40 
     41 &gem0 {
     42 	status = "okay";
     43 	phy-mode = "rgmii-id";
     44 	phy-handle = <&ethernet_phy>;
     45 
     46 	ethernet_phy: ethernet-phy@7 {
     47 		reg = <7>;
     48 		device_type = "ethernet-phy";
     49 	};
     50 };
     51 
     52 &i2c0 {
     53 	status = "okay";
     54 	clock-frequency = <400000>;
     55 
     56 	eeprom: eeprom@52 {
     57 		compatible = "atmel,24c02";
     58 		reg = <0x52>;
     59 	};
     60 
     61 };
     62 
     63 &sdhci0 {
     64 	status = "okay";
     65 };
     66 
     67 &spi1 {
     68 	status = "okay";
     69 	num-cs = <4>;
     70 	is-decoded-cs = <0>;
     71 	flash@1 {
     72 		compatible = "sst25wf080", "jedec,spi-nor";
     73 		reg = <1>;
     74 		spi-max-frequency = <1000000>;
     75 		partitions {
     76 			compatible = "fixed-partitions";
     77 			#address-cells = <1>;
     78 			#size-cells = <1>;
     79 			partition@0 {
     80 				label = "data";
     81 				reg = <0x0 0x100000>;
     82 			};
     83 		};
     84 	};
     85 };
     86 
     87 &uart1 {
     88 	status = "okay";
     89 };
     90 
     91 &usb0 {
     92 	status = "okay";
     93 	dr_mode = "host";
     94 	usb-phy = <&usb_phy0>;
     95 };
     96