1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (c) 2017, The Linux Foundation. All rights reserved. 4 */ 5 6 #include <dt-bindings/interrupt-controller/arm-gic.h> 7 #include <dt-bindings/clock/qcom,gcc-ipq8074.h> 8 9 / { 10 model = "Qualcomm Technologies, Inc. IPQ8074"; 11 compatible = "qcom,ipq8074"; 12 13 clocks { 14 sleep_clk: sleep_clk { 15 compatible = "fixed-clock"; 16 clock-frequency = <32000>; 17 #clock-cells = <0>; 18 }; 19 20 xo: xo { 21 compatible = "fixed-clock"; 22 clock-frequency = <19200000>; 23 #clock-cells = <0>; 24 }; 25 }; 26 27 cpus { 28 #address-cells = <0x1>; 29 #size-cells = <0x0>; 30 31 CPU0: cpu@0 { 32 device_type = "cpu"; 33 compatible = "arm,cortex-a53"; 34 reg = <0x0>; 35 next-level-cache = <&L2_0>; 36 enable-method = "psci"; 37 }; 38 39 CPU1: cpu@1 { 40 device_type = "cpu"; 41 compatible = "arm,cortex-a53"; 42 enable-method = "psci"; 43 reg = <0x1>; 44 next-level-cache = <&L2_0>; 45 }; 46 47 CPU2: cpu@2 { 48 device_type = "cpu"; 49 compatible = "arm,cortex-a53"; 50 enable-method = "psci"; 51 reg = <0x2>; 52 next-level-cache = <&L2_0>; 53 }; 54 55 CPU3: cpu@3 { 56 device_type = "cpu"; 57 compatible = "arm,cortex-a53"; 58 enable-method = "psci"; 59 reg = <0x3>; 60 next-level-cache = <&L2_0>; 61 }; 62 63 L2_0: l2-cache { 64 compatible = "cache"; 65 cache-level = <0x2>; 66 }; 67 }; 68 69 pmu { 70 compatible = "arm,cortex-a53-pmu"; 71 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 72 }; 73 74 psci { 75 compatible = "arm,psci-1.0"; 76 method = "smc"; 77 }; 78 79 firmware { 80 scm { 81 compatible = "qcom,scm-ipq8074", "qcom,scm"; 82 }; 83 }; 84 85 soc: soc { 86 #address-cells = <0x1>; 87 #size-cells = <0x1>; 88 ranges = <0 0 0 0xffffffff>; 89 compatible = "simple-bus"; 90 91 ssphy_1: phy@58000 { 92 compatible = "qcom,ipq8074-qmp-usb3-phy"; 93 reg = <0x00058000 0x1c4>; 94 #clock-cells = <1>; 95 #address-cells = <1>; 96 #size-cells = <1>; 97 ranges; 98 99 clocks = <&gcc GCC_USB1_AUX_CLK>, 100 <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, 101 <&xo>; 102 clock-names = "aux", "cfg_ahb", "ref"; 103 104 resets = <&gcc GCC_USB1_PHY_BCR>, 105 <&gcc GCC_USB3PHY_1_PHY_BCR>; 106 reset-names = "phy","common"; 107 status = "disabled"; 108 109 usb1_ssphy: lane@58200 { 110 reg = <0x00058200 0x130>, /* Tx */ 111 <0x00058400 0x200>, /* Rx */ 112 <0x00058800 0x1f8>, /* PCS */ 113 <0x00058600 0x044>; /* PCS misc*/ 114 #phy-cells = <0>; 115 clocks = <&gcc GCC_USB1_PIPE_CLK>; 116 clock-names = "pipe0"; 117 clock-output-names = "gcc_usb1_pipe_clk_src"; 118 }; 119 }; 120 121 qusb_phy_1: phy@59000 { 122 compatible = "qcom,ipq8074-qusb2-phy"; 123 reg = <0x00059000 0x180>; 124 #phy-cells = <0>; 125 126 clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, 127 <&xo>; 128 clock-names = "cfg_ahb", "ref"; 129 130 resets = <&gcc GCC_QUSB2_1_PHY_BCR>; 131 status = "disabled"; 132 }; 133 134 ssphy_0: phy@78000 { 135 compatible = "qcom,ipq8074-qmp-usb3-phy"; 136 reg = <0x00078000 0x1c4>; 137 #clock-cells = <1>; 138 #address-cells = <1>; 139 #size-cells = <1>; 140 ranges; 141 142 clocks = <&gcc GCC_USB0_AUX_CLK>, 143 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, 144 <&xo>; 145 clock-names = "aux", "cfg_ahb", "ref"; 146 147 resets = <&gcc GCC_USB0_PHY_BCR>, 148 <&gcc GCC_USB3PHY_0_PHY_BCR>; 149 reset-names = "phy","common"; 150 status = "disabled"; 151 152 usb0_ssphy: lane@78200 { 153 reg = <0x00078200 0x130>, /* Tx */ 154 <0x00078400 0x200>, /* Rx */ 155 <0x00078800 0x1f8>, /* PCS */ 156 <0x00078600 0x044>; /* PCS misc*/ 157 #phy-cells = <0>; 158 clocks = <&gcc GCC_USB0_PIPE_CLK>; 159 clock-names = "pipe0"; 160 clock-output-names = "gcc_usb0_pipe_clk_src"; 161 }; 162 }; 163 164 qusb_phy_0: phy@79000 { 165 compatible = "qcom,ipq8074-qusb2-phy"; 166 reg = <0x00079000 0x180>; 167 #phy-cells = <0>; 168 169 clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, 170 <&xo>; 171 clock-names = "cfg_ahb", "ref"; 172 173 resets = <&gcc GCC_QUSB2_0_PHY_BCR>; 174 status = "disabled"; 175 }; 176 177 pcie_phy0: phy@86000 { 178 compatible = "qcom,ipq8074-qmp-pcie-phy"; 179 reg = <0x00086000 0x1000>; 180 #phy-cells = <0>; 181 clocks = <&gcc GCC_PCIE0_PIPE_CLK>; 182 clock-names = "pipe_clk"; 183 clock-output-names = "pcie20_phy0_pipe_clk"; 184 185 resets = <&gcc GCC_PCIE0_PHY_BCR>, 186 <&gcc GCC_PCIE0PHY_PHY_BCR>; 187 reset-names = "phy", 188 "common"; 189 status = "disabled"; 190 }; 191 192 pcie_phy1: phy@8e000 { 193 compatible = "qcom,ipq8074-qmp-pcie-phy"; 194 reg = <0x0008e000 0x1000>; 195 #phy-cells = <0>; 196 clocks = <&gcc GCC_PCIE1_PIPE_CLK>; 197 clock-names = "pipe_clk"; 198 clock-output-names = "pcie20_phy1_pipe_clk"; 199 200 resets = <&gcc GCC_PCIE1_PHY_BCR>, 201 <&gcc GCC_PCIE1PHY_PHY_BCR>; 202 reset-names = "phy", 203 "common"; 204 status = "disabled"; 205 }; 206 207 prng: rng@e3000 { 208 compatible = "qcom,prng-ee"; 209 reg = <0x000e3000 0x1000>; 210 clocks = <&gcc GCC_PRNG_AHB_CLK>; 211 clock-names = "core"; 212 status = "disabled"; 213 }; 214 215 cryptobam: dma@704000 { 216 compatible = "qcom,bam-v1.7.0"; 217 reg = <0x00704000 0x20000>; 218 interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; 219 clocks = <&gcc GCC_CRYPTO_AHB_CLK>; 220 clock-names = "bam_clk"; 221 #dma-cells = <1>; 222 qcom,ee = <1>; 223 qcom,controlled-remotely = <1>; 224 status = "disabled"; 225 }; 226 227 crypto: crypto@73a000 { 228 compatible = "qcom,crypto-v5.1"; 229 reg = <0x0073a000 0x6000>; 230 clocks = <&gcc GCC_CRYPTO_AHB_CLK>, 231 <&gcc GCC_CRYPTO_AXI_CLK>, 232 <&gcc GCC_CRYPTO_CLK>; 233 clock-names = "iface", "bus", "core"; 234 dmas = <&cryptobam 2>, <&cryptobam 3>; 235 dma-names = "rx", "tx"; 236 status = "disabled"; 237 }; 238 239 tlmm: pinctrl@1000000 { 240 compatible = "qcom,ipq8074-pinctrl"; 241 reg = <0x01000000 0x300000>; 242 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; 243 gpio-controller; 244 gpio-ranges = <&tlmm 0 0 70>; 245 #gpio-cells = <0x2>; 246 interrupt-controller; 247 #interrupt-cells = <0x2>; 248 249 serial_4_pins: serial4-pinmux { 250 pins = "gpio23", "gpio24"; 251 function = "blsp4_uart1"; 252 drive-strength = <8>; 253 bias-disable; 254 }; 255 256 i2c_0_pins: i2c-0-pinmux { 257 pins = "gpio42", "gpio43"; 258 function = "blsp1_i2c"; 259 drive-strength = <8>; 260 bias-disable; 261 }; 262 263 spi_0_pins: spi-0-pins { 264 pins = "gpio38", "gpio39", "gpio40", "gpio41"; 265 function = "blsp0_spi"; 266 drive-strength = <8>; 267 bias-disable; 268 }; 269 270 hsuart_pins: hsuart-pins { 271 pins = "gpio46", "gpio47", "gpio48", "gpio49"; 272 function = "blsp2_uart"; 273 drive-strength = <8>; 274 bias-disable; 275 }; 276 277 qpic_pins: qpic-pins { 278 pins = "gpio1", "gpio3", "gpio4", 279 "gpio5", "gpio6", "gpio7", 280 "gpio8", "gpio10", "gpio11", 281 "gpio12", "gpio13", "gpio14", 282 "gpio15", "gpio16", "gpio17"; 283 function = "qpic"; 284 drive-strength = <8>; 285 bias-disable; 286 }; 287 }; 288 289 gcc: gcc@1800000 { 290 compatible = "qcom,gcc-ipq8074"; 291 reg = <0x01800000 0x80000>; 292 #clock-cells = <0x1>; 293 #reset-cells = <0x1>; 294 }; 295 296 sdhc_1: sdhci@7824900 { 297 compatible = "qcom,sdhci-msm-v4"; 298 reg = <0x7824900 0x500>, <0x7824000 0x800>; 299 reg-names = "hc_mem", "core_mem"; 300 301 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, 302 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; 303 interrupt-names = "hc_irq", "pwr_irq"; 304 305 clocks = <&xo>, 306 <&gcc GCC_SDCC1_AHB_CLK>, 307 <&gcc GCC_SDCC1_APPS_CLK>; 308 clock-names = "xo", "iface", "core"; 309 max-frequency = <384000000>; 310 mmc-ddr-1_8v; 311 mmc-hs200-1_8v; 312 mmc-hs400-1_8v; 313 bus-width = <8>; 314 315 status = "disabled"; 316 }; 317 318 blsp_dma: dma-controller@7884000 { 319 compatible = "qcom,bam-v1.7.0"; 320 reg = <0x07884000 0x2b000>; 321 interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; 322 clocks = <&gcc GCC_BLSP1_AHB_CLK>; 323 clock-names = "bam_clk"; 324 #dma-cells = <1>; 325 qcom,ee = <0>; 326 }; 327 328 blsp1_uart1: serial@78af000 { 329 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 330 reg = <0x078af000 0x200>; 331 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; 332 clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, 333 <&gcc GCC_BLSP1_AHB_CLK>; 334 clock-names = "core", "iface"; 335 status = "disabled"; 336 }; 337 338 blsp1_uart3: serial@78b1000 { 339 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 340 reg = <0x078b1000 0x200>; 341 interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; 342 clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, 343 <&gcc GCC_BLSP1_AHB_CLK>; 344 clock-names = "core", "iface"; 345 dmas = <&blsp_dma 4>, 346 <&blsp_dma 5>; 347 dma-names = "tx", "rx"; 348 pinctrl-0 = <&hsuart_pins>; 349 pinctrl-names = "default"; 350 status = "disabled"; 351 }; 352 353 blsp1_uart5: serial@78b3000 { 354 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 355 reg = <0x078b3000 0x200>; 356 interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; 357 clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>, 358 <&gcc GCC_BLSP1_AHB_CLK>; 359 clock-names = "core", "iface"; 360 pinctrl-0 = <&serial_4_pins>; 361 pinctrl-names = "default"; 362 status = "disabled"; 363 }; 364 365 blsp1_spi1: spi@78b5000 { 366 compatible = "qcom,spi-qup-v2.2.1"; 367 #address-cells = <1>; 368 #size-cells = <0>; 369 reg = <0x078b5000 0x600>; 370 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 371 spi-max-frequency = <50000000>; 372 clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, 373 <&gcc GCC_BLSP1_AHB_CLK>; 374 clock-names = "core", "iface"; 375 dmas = <&blsp_dma 12>, <&blsp_dma 13>; 376 dma-names = "tx", "rx"; 377 pinctrl-0 = <&spi_0_pins>; 378 pinctrl-names = "default"; 379 status = "disabled"; 380 }; 381 382 blsp1_i2c2: i2c@78b6000 { 383 compatible = "qcom,i2c-qup-v2.2.1"; 384 #address-cells = <1>; 385 #size-cells = <0>; 386 reg = <0x078b6000 0x600>; 387 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 388 clocks = <&gcc GCC_BLSP1_AHB_CLK>, 389 <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; 390 clock-names = "iface", "core"; 391 clock-frequency = <400000>; 392 dmas = <&blsp_dma 15>, <&blsp_dma 14>; 393 dma-names = "rx", "tx"; 394 pinctrl-0 = <&i2c_0_pins>; 395 pinctrl-names = "default"; 396 status = "disabled"; 397 }; 398 399 blsp1_i2c3: i2c@78b7000 { 400 compatible = "qcom,i2c-qup-v2.2.1"; 401 #address-cells = <1>; 402 #size-cells = <0>; 403 reg = <0x078b7000 0x600>; 404 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 405 clocks = <&gcc GCC_BLSP1_AHB_CLK>, 406 <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; 407 clock-names = "iface", "core"; 408 clock-frequency = <100000>; 409 dmas = <&blsp_dma 17>, <&blsp_dma 16>; 410 dma-names = "rx", "tx"; 411 status = "disabled"; 412 }; 413 414 blsp1_i2c6: i2c@78ba000 { 415 compatible = "qcom,i2c-qup-v2.2.1"; 416 #address-cells = <1>; 417 #size-cells = <0>; 418 reg = <0x078ba000 0x600>; 419 interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; 420 clocks = <&gcc GCC_BLSP1_AHB_CLK>, 421 <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; 422 clock-names = "iface", "core"; 423 clock-frequency = <100000>; 424 dmas = <&blsp_dma 23>, <&blsp_dma 22>; 425 dma-names = "rx", "tx"; 426 status = "disabled"; 427 }; 428 429 qpic_bam: dma-controller@7984000 { 430 compatible = "qcom,bam-v1.7.0"; 431 reg = <0x07984000 0x1a000>; 432 interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; 433 clocks = <&gcc GCC_QPIC_AHB_CLK>; 434 clock-names = "bam_clk"; 435 #dma-cells = <1>; 436 qcom,ee = <0>; 437 status = "disabled"; 438 }; 439 440 qpic_nand: nand@79b0000 { 441 compatible = "qcom,ipq8074-nand"; 442 reg = <0x079b0000 0x10000>; 443 #address-cells = <1>; 444 #size-cells = <0>; 445 clocks = <&gcc GCC_QPIC_CLK>, 446 <&gcc GCC_QPIC_AHB_CLK>; 447 clock-names = "core", "aon"; 448 449 dmas = <&qpic_bam 0>, 450 <&qpic_bam 1>, 451 <&qpic_bam 2>; 452 dma-names = "tx", "rx", "cmd"; 453 pinctrl-0 = <&qpic_pins>; 454 pinctrl-names = "default"; 455 status = "disabled"; 456 }; 457 458 usb_0: usb@8af8800 { 459 compatible = "qcom,dwc3"; 460 reg = <0x08af8800 0x400>; 461 #address-cells = <1>; 462 #size-cells = <1>; 463 ranges; 464 465 clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, 466 <&gcc GCC_USB0_MASTER_CLK>, 467 <&gcc GCC_USB0_SLEEP_CLK>, 468 <&gcc GCC_USB0_MOCK_UTMI_CLK>; 469 clock-names = "sys_noc_axi", 470 "master", 471 "sleep", 472 "mock_utmi"; 473 474 assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, 475 <&gcc GCC_USB0_MASTER_CLK>, 476 <&gcc GCC_USB0_MOCK_UTMI_CLK>; 477 assigned-clock-rates = <133330000>, 478 <133330000>, 479 <19200000>; 480 481 resets = <&gcc GCC_USB0_BCR>; 482 status = "disabled"; 483 484 dwc_0: dwc3@8a00000 { 485 compatible = "snps,dwc3"; 486 reg = <0x8a00000 0xcd00>; 487 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; 488 phys = <&qusb_phy_0>, <&usb0_ssphy>; 489 phy-names = "usb2-phy", "usb3-phy"; 490 snps,is-utmi-l1-suspend; 491 snps,hird-threshold = /bits/ 8 <0x0>; 492 snps,dis_u2_susphy_quirk; 493 snps,dis_u3_susphy_quirk; 494 dr_mode = "host"; 495 }; 496 }; 497 498 usb_1: usb@8cf8800 { 499 compatible = "qcom,dwc3"; 500 reg = <0x08cf8800 0x400>; 501 #address-cells = <1>; 502 #size-cells = <1>; 503 ranges; 504 505 clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>, 506 <&gcc GCC_USB1_MASTER_CLK>, 507 <&gcc GCC_USB1_SLEEP_CLK>, 508 <&gcc GCC_USB1_MOCK_UTMI_CLK>; 509 clock-names = "sys_noc_axi", 510 "master", 511 "sleep", 512 "mock_utmi"; 513 514 assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>, 515 <&gcc GCC_USB1_MASTER_CLK>, 516 <&gcc GCC_USB1_MOCK_UTMI_CLK>; 517 assigned-clock-rates = <133330000>, 518 <133330000>, 519 <19200000>; 520 521 resets = <&gcc GCC_USB1_BCR>; 522 status = "disabled"; 523 524 dwc_1: dwc3@8c00000 { 525 compatible = "snps,dwc3"; 526 reg = <0x8c00000 0xcd00>; 527 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; 528 phys = <&qusb_phy_1>, <&usb1_ssphy>; 529 phy-names = "usb2-phy", "usb3-phy"; 530 snps,is-utmi-l1-suspend; 531 snps,hird-threshold = /bits/ 8 <0x0>; 532 snps,dis_u2_susphy_quirk; 533 snps,dis_u3_susphy_quirk; 534 dr_mode = "host"; 535 }; 536 }; 537 538 intc: interrupt-controller@b000000 { 539 compatible = "qcom,msm-qgic2"; 540 interrupt-controller; 541 #interrupt-cells = <0x3>; 542 reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; 543 }; 544 545 timer { 546 compatible = "arm,armv8-timer"; 547 interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 548 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 549 <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 550 <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; 551 }; 552 553 watchdog: watchdog@b017000 { 554 compatible = "qcom,kpss-wdt"; 555 reg = <0xb017000 0x1000>; 556 interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; 557 clocks = <&sleep_clk>; 558 timeout-sec = <30>; 559 }; 560 561 timer@b120000 { 562 #address-cells = <1>; 563 #size-cells = <1>; 564 ranges; 565 compatible = "arm,armv7-timer-mem"; 566 reg = <0x0b120000 0x1000>; 567 clock-frequency = <19200000>; 568 569 frame@b120000 { 570 frame-number = <0>; 571 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, 572 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 573 reg = <0x0b121000 0x1000>, 574 <0x0b122000 0x1000>; 575 }; 576 577 frame@b123000 { 578 frame-number = <1>; 579 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; 580 reg = <0x0b123000 0x1000>; 581 status = "disabled"; 582 }; 583 584 frame@b124000 { 585 frame-number = <2>; 586 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 587 reg = <0x0b124000 0x1000>; 588 status = "disabled"; 589 }; 590 591 frame@b125000 { 592 frame-number = <3>; 593 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; 594 reg = <0x0b125000 0x1000>; 595 status = "disabled"; 596 }; 597 598 frame@b126000 { 599 frame-number = <4>; 600 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 601 reg = <0x0b126000 0x1000>; 602 status = "disabled"; 603 }; 604 605 frame@b127000 { 606 frame-number = <5>; 607 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 608 reg = <0x0b127000 0x1000>; 609 status = "disabled"; 610 }; 611 612 frame@b128000 { 613 frame-number = <6>; 614 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 615 reg = <0x0b128000 0x1000>; 616 status = "disabled"; 617 }; 618 }; 619 620 pcie1: pci@10000000 { 621 compatible = "qcom,pcie-ipq8074"; 622 reg = <0x10000000 0xf1d>, 623 <0x10000f20 0xa8>, 624 <0x00088000 0x2000>, 625 <0x10100000 0x1000>; 626 reg-names = "dbi", "elbi", "parf", "config"; 627 device_type = "pci"; 628 linux,pci-domain = <1>; 629 bus-range = <0x00 0xff>; 630 num-lanes = <1>; 631 #address-cells = <3>; 632 #size-cells = <2>; 633 634 phys = <&pcie_phy1>; 635 phy-names = "pciephy"; 636 637 ranges = <0x81000000 0 0x10200000 0x10200000 638 0 0x100000 /* downstream I/O */ 639 0x82000000 0 0x10300000 0x10300000 640 0 0xd00000>; /* non-prefetchable memory */ 641 642 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; 643 interrupt-names = "msi"; 644 #interrupt-cells = <1>; 645 interrupt-map-mask = <0 0 0 0x7>; 646 interrupt-map = <0 0 0 1 &intc 0 142 647 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ 648 <0 0 0 2 &intc 0 143 649 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ 650 <0 0 0 3 &intc 0 144 651 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ 652 <0 0 0 4 &intc 0 145 653 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ 654 655 clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>, 656 <&gcc GCC_PCIE1_AXI_M_CLK>, 657 <&gcc GCC_PCIE1_AXI_S_CLK>, 658 <&gcc GCC_PCIE1_AHB_CLK>, 659 <&gcc GCC_PCIE1_AUX_CLK>; 660 clock-names = "iface", 661 "axi_m", 662 "axi_s", 663 "ahb", 664 "aux"; 665 resets = <&gcc GCC_PCIE1_PIPE_ARES>, 666 <&gcc GCC_PCIE1_SLEEP_ARES>, 667 <&gcc GCC_PCIE1_CORE_STICKY_ARES>, 668 <&gcc GCC_PCIE1_AXI_MASTER_ARES>, 669 <&gcc GCC_PCIE1_AXI_SLAVE_ARES>, 670 <&gcc GCC_PCIE1_AHB_ARES>, 671 <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>; 672 reset-names = "pipe", 673 "sleep", 674 "sticky", 675 "axi_m", 676 "axi_s", 677 "ahb", 678 "axi_m_sticky"; 679 status = "disabled"; 680 }; 681 682 pcie0: pci@20000000 { 683 compatible = "qcom,pcie-ipq8074"; 684 reg = <0x20000000 0xf1d>, 685 <0x20000f20 0xa8>, 686 <0x00080000 0x2000>, 687 <0x20100000 0x1000>; 688 reg-names = "dbi", "elbi", "parf", "config"; 689 device_type = "pci"; 690 linux,pci-domain = <0>; 691 bus-range = <0x00 0xff>; 692 num-lanes = <1>; 693 #address-cells = <3>; 694 #size-cells = <2>; 695 696 phys = <&pcie_phy0>; 697 phy-names = "pciephy"; 698 699 ranges = <0x81000000 0 0x20200000 0x20200000 700 0 0x100000 /* downstream I/O */ 701 0x82000000 0 0x20300000 0x20300000 702 0 0xd00000>; /* non-prefetchable memory */ 703 704 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; 705 interrupt-names = "msi"; 706 #interrupt-cells = <1>; 707 interrupt-map-mask = <0 0 0 0x7>; 708 interrupt-map = <0 0 0 1 &intc 0 75 709 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ 710 <0 0 0 2 &intc 0 78 711 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ 712 <0 0 0 3 &intc 0 79 713 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ 714 <0 0 0 4 &intc 0 83 715 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ 716 717 clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, 718 <&gcc GCC_PCIE0_AXI_M_CLK>, 719 <&gcc GCC_PCIE0_AXI_S_CLK>, 720 <&gcc GCC_PCIE0_AHB_CLK>, 721 <&gcc GCC_PCIE0_AUX_CLK>; 722 723 clock-names = "iface", 724 "axi_m", 725 "axi_s", 726 "ahb", 727 "aux"; 728 resets = <&gcc GCC_PCIE0_PIPE_ARES>, 729 <&gcc GCC_PCIE0_SLEEP_ARES>, 730 <&gcc GCC_PCIE0_CORE_STICKY_ARES>, 731 <&gcc GCC_PCIE0_AXI_MASTER_ARES>, 732 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, 733 <&gcc GCC_PCIE0_AHB_ARES>, 734 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>; 735 reset-names = "pipe", 736 "sleep", 737 "sticky", 738 "axi_m", 739 "axi_s", 740 "ahb", 741 "axi_m_sticky"; 742 status = "disabled"; 743 }; 744 }; 745 }; 746
Indexes created Sun Oct 12 05:10:08 GMT 2025