init_main.c revision 1.333 1 /* $NetBSD: init_main.c,v 1.333 2007/12/26 16:01:35 ad Exp $ */
2
3 /*
4 * Copyright (c) 1982, 1986, 1989, 1991, 1992, 1993
5 * The Regents of the University of California. All rights reserved.
6 * (c) UNIX System Laboratories, Inc.
7 * All or some portions of this file are derived from material licensed
8 * to the University of California by American Telephone and Telegraph
9 * Co. or Unix System Laboratories, Inc. and are reproduced herein with
10 * the permission of UNIX System Laboratories, Inc.
11 *
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
14 * are met:
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions and the following disclaimer.
17 * 2. Redistributions in binary form must reproduce the above copyright
18 * notice, this list of conditions and the following disclaimer in the
19 * documentation and/or other materials provided with the distribution.
20 * 3. Neither the name of the University nor the names of its contributors
21 * may be used to endorse or promote products derived from this software
22 * without specific prior written permission.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
25 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
30 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
31 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
32 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
33 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34 * SUCH DAMAGE.
35 *
36 * @(#)init_main.c 8.16 (Berkeley) 5/14/95
37 */
38
39 /*
40 * Copyright (c) 1995 Christopher G. Demetriou. All rights reserved.
41 *
42 * Redistribution and use in source and binary forms, with or without
43 * modification, are permitted provided that the following conditions
44 * are met:
45 * 1. Redistributions of source code must retain the above copyright
46 * notice, this list of conditions and the following disclaimer.
47 * 2. Redistributions in binary form must reproduce the above copyright
48 * notice, this list of conditions and the following disclaimer in the
49 * documentation and/or other materials provided with the distribution.
50 * 3. All advertising materials mentioning features or use of this software
51 * must display the following acknowledgement:
52 * This product includes software developed by the University of
53 * California, Berkeley and its contributors.
54 * 4. Neither the name of the University nor the names of its contributors
55 * may be used to endorse or promote products derived from this software
56 * without specific prior written permission.
57 *
58 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
59 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
60 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
61 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
62 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
63 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
64 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
65 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
66 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
67 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
68 * SUCH DAMAGE.
69 *
70 * @(#)init_main.c 8.16 (Berkeley) 5/14/95
71 */
72
73 #include <sys/cdefs.h>
74 __KERNEL_RCSID(0, "$NetBSD: init_main.c,v 1.333 2007/12/26 16:01:35 ad Exp $");
75
76 #include "opt_ipsec.h"
77 #include "opt_ntp.h"
78 #include "opt_pipe.h"
79 #include "opt_posix.h"
80 #include "opt_syscall_debug.h"
81 #include "opt_sysv.h"
82 #include "opt_systrace.h"
83 #include "opt_fileassoc.h"
84 #include "opt_ktrace.h"
85 #include "opt_pax.h"
86
87 #include "rnd.h"
88 #include "sysmon_envsys.h"
89 #include "sysmon_power.h"
90 #include "sysmon_taskq.h"
91 #include "sysmon_wdog.h"
92 #include "veriexec.h"
93
94 #include <sys/param.h>
95 #include <sys/acct.h>
96 #include <sys/filedesc.h>
97 #include <sys/file.h>
98 #include <sys/errno.h>
99 #include <sys/callout.h>
100 #include <sys/cpu.h>
101 #include <sys/kernel.h>
102 #include <sys/kmem.h>
103 #include <sys/mount.h>
104 #include <sys/proc.h>
105 #include <sys/kthread.h>
106 #include <sys/resourcevar.h>
107 #include <sys/signalvar.h>
108 #include <sys/systm.h>
109 #include <sys/vnode.h>
110 #include <sys/fstrans.h>
111 #include <sys/tty.h>
112 #include <sys/conf.h>
113 #include <sys/disklabel.h>
114 #include <sys/buf.h>
115 #include <sys/device.h>
116 #include <sys/exec.h>
117 #include <sys/socketvar.h>
118 #include <sys/protosw.h>
119 #include <sys/reboot.h>
120 #include <sys/user.h>
121 #include <sys/sysctl.h>
122 #include <sys/event.h>
123 #include <sys/mbuf.h>
124 #include <sys/sched.h>
125 #include <sys/sleepq.h>
126 #include <sys/iostat.h>
127 #include <sys/vmem.h>
128 #include <sys/uuid.h>
129 #include <sys/extent.h>
130 #include <sys/disk.h>
131 #include <sys/mqueue.h>
132 #include <sys/msgbuf.h>
133 #ifdef FAST_IPSEC
134 #include <netipsec/ipsec.h>
135 #endif
136 #ifdef SYSVSHM
137 #include <sys/shm.h>
138 #endif
139 #ifdef SYSVSEM
140 #include <sys/sem.h>
141 #endif
142 #ifdef SYSVMSG
143 #include <sys/msg.h>
144 #endif
145 #ifdef SYSTRACE
146 #include <sys/systrace.h>
147 #endif
148 #ifdef P1003_1B_SEMAPHORE
149 #include <sys/ksem.h>
150 #endif
151 #include <sys/domain.h>
152 #include <sys/namei.h>
153 #if NRND > 0
154 #include <sys/rnd.h>
155 #endif
156 #include <sys/pipe.h>
157 #ifdef LKM
158 #include <sys/lkm.h>
159 #endif
160 #if NVERIEXEC > 0
161 #include <sys/verified_exec.h>
162 #endif /* NVERIEXEC > 0 */
163 #ifdef KTRACE
164 #include <sys/ktrace.h>
165 #endif
166 #include <sys/kauth.h>
167 #include <net80211/ieee80211_netbsd.h>
168
169 #include <sys/syscall.h>
170 #include <sys/syscallargs.h>
171
172 #if defined(PAX_MPROTECT) || defined(PAX_SEGVGUARD)
173 #include <sys/pax.h>
174 #endif /* PAX_MPROTECT || PAX_SEGVGUARD */
175 #include <ufs/ufs/quota.h>
176
177 #include <miscfs/genfs/genfs.h>
178 #include <miscfs/syncfs/syncfs.h>
179
180 #include <sys/cpu.h>
181
182 #include <uvm/uvm.h>
183
184 #if NSYSMON_TASKQ > 0
185 #include <dev/sysmon/sysmon_taskq.h>
186 #endif
187
188 #include <dev/cons.h>
189
190 #if NSYSMON_ENVSYS > 0 || NSYSMON_POWER > 0 || NSYSMON_WDOG > 0
191 #include <dev/sysmon/sysmonvar.h>
192 #endif
193
194 #include <net/if.h>
195 #include <net/raw_cb.h>
196
197 #include <secmodel/secmodel.h>
198
199 extern struct proc proc0;
200 extern struct lwp lwp0;
201 extern struct cwdinfo cwdi0;
202 extern time_t rootfstime;
203
204 #ifndef curlwp
205 struct lwp *curlwp = &lwp0;
206 #endif
207 struct proc *initproc;
208
209 struct vnode *rootvp, *swapdev_vp;
210 int boothowto;
211 int cold = 1; /* still working on startup */
212 struct timeval boottime; /* time at system startup - will only follow settime deltas */
213
214 volatile int start_init_exec; /* semaphore for start_init() */
215
216 static void check_console(struct lwp *l);
217 static void start_init(void *);
218 void main(void);
219
220 #if defined(__SSP__) || defined(__SSP_ALL__)
221 long __stack_chk_guard[8] = {0, 0, 0, 0, 0, 0, 0, 0};
222 void __stack_chk_fail(void);
223
224 void
225 __stack_chk_fail(void)
226 {
227 panic("stack overflow detected; terminated");
228 }
229 #endif
230
231 void __secmodel_none(void);
232 __weak_alias(secmodel_start,__secmodel_none);
233 void
234 __secmodel_none(void)
235 {
236 return;
237 }
238
239 /*
240 * System startup; initialize the world, create process 0, mount root
241 * filesystem, and fork to create init and pagedaemon. Most of the
242 * hard work is done in the lower-level initialization routines including
243 * startup(), which does memory initialization and autoconfiguration.
244 */
245 void
246 main(void)
247 {
248 #ifdef __HAVE_TIMECOUNTER
249 struct timeval time;
250 #endif
251 struct lwp *l;
252 struct proc *p;
253 struct pdevinit *pdev;
254 int s, error;
255 extern struct pdevinit pdevinit[];
256 #ifdef NVNODE_IMPLICIT
257 int usevnodes;
258 #endif
259 CPU_INFO_ITERATOR cii;
260 struct cpu_info *ci;
261
262 l = &lwp0;
263 #ifndef LWP0_CPU_INFO
264 l->l_cpu = curcpu();
265 #endif
266
267 /*
268 * XXX This is a temporary check to be removed before
269 * NetBSD 5.0 is released.
270 */
271 #if !defined(__i386__ ) && !defined(__x86_64__)
272 if (curlwp != l) {
273 printf("NOTICE: curlwp should be set before main()\n");
274 DELAY(250000);
275 curlwp = l;
276 }
277 #endif
278
279 /*
280 * Attempt to find console and initialize
281 * in case of early panic or other messages.
282 */
283 consinit();
284
285 kernel_lock_init();
286
287 uvm_init();
288
289 kmem_init();
290
291 /* Initialize the extent manager. */
292 extent_init();
293
294 /* Do machine-dependent initialization. */
295 cpu_startup();
296
297 /* Initialize callouts, part 1. */
298 callout_startup();
299
300 /*
301 * Initialize the kernel authorization subsystem and start the
302 * default security model, if any. We need to do this early
303 * enough so that subsystems relying on any of the aforementioned
304 * can work properly. Since the security model may dictate the
305 * credential inheritance policy, it is needed at least before
306 * any process is created, specifically proc0.
307 */
308 kauth_init();
309 secmodel_start();
310
311 /* Initialize the buffer cache */
312 bufinit();
313
314 /*
315 * Initialize mbuf's. Do this now because we might attempt to
316 * allocate mbufs or mbuf clusters during autoconfiguration.
317 */
318 mbinit();
319
320 /* Initialize sockets. */
321 soinit();
322
323 /*
324 * The following things must be done before autoconfiguration.
325 */
326 evcnt_init(); /* initialize event counters */
327 #if NRND > 0
328 rnd_init(); /* initialize RNG */
329 #endif
330
331 /* Initialize process and pgrp structures. */
332 procinit();
333 lwpinit();
334
335 /* Initialize signal-related data structures. */
336 signal_init();
337
338 /* Initialize resource management. */
339 resource_init();
340
341 /* Create process 0 (the swapper). */
342 proc0_init();
343
344 /* Initialize the UID hash table. */
345 uid_init();
346
347 /* Charge root for one process. */
348 (void)chgproccnt(0, 1);
349
350 /* Initialize timekeeping. */
351 time_init();
352
353 /* Initialize the run queues, turnstiles and sleep queues. */
354 mutex_init(&cpu_lock, MUTEX_DEFAULT, IPL_NONE);
355 sched_rqinit();
356 turnstile_init();
357 sleeptab_init(&sleeptab);
358
359 /* MI initialization of the boot cpu */
360 error = mi_cpu_attach(curcpu());
361 KASSERT(error == 0);
362
363 /* Initialize the sysctl subsystem. */
364 sysctl_init();
365
366 /* Initialize I/O statistics. */
367 iostat_init();
368
369 /* Initialize the log device. */
370 loginit();
371
372 /* Initialize the file systems. */
373 #ifdef NVNODE_IMPLICIT
374 /*
375 * If maximum number of vnodes in namei vnode cache is not explicitly
376 * defined in kernel config, adjust the number such as we use roughly
377 * 1.0% of memory for vnode cache (but not less than NVNODE vnodes).
378 */
379 usevnodes = (ptoa((unsigned)physmem) / 100) / sizeof(struct vnode);
380 if (usevnodes > desiredvnodes)
381 desiredvnodes = usevnodes;
382 #endif
383 vfsinit();
384
385 /* Initialize fstrans. */
386 fstrans_init();
387
388 /* Initialize the file descriptor system. */
389 filedesc_init();
390
391 /* Initialize the select()/poll() system calls. */
392 selsysinit();
393
394 /* Initialize asynchronous I/O. */
395 aio_sysinit();
396
397 /* Initialize message queues. */
398 mqueue_sysinit();
399
400 /* Initialize the system monitor subsystems. */
401 #if NSYSMON_TASKQ > 0
402 sysmon_task_queue_preinit();
403 #endif
404
405 #if NSYSMON_ENVSYS > 0
406 sysmon_envsys_init();
407 #endif
408
409 #if NSYSMON_POWER > 0
410 sysmon_power_init();
411 #endif
412
413 #if NSYSMON_WDOG > 0
414 sysmon_wdog_init();
415 #endif
416
417 #ifdef __HAVE_TIMECOUNTER
418 inittimecounter();
419 ntp_init();
420 #endif /* __HAVE_TIMECOUNTER */
421
422 /* Initialize the device switch tables. */
423 devsw_init();
424
425 /* Initialize tty subsystem. */
426 tty_init();
427 ttyldisc_init();
428
429 /* Initialize the disk wedge subsystem. */
430 dkwedge_init();
431
432 /* Configure the system hardware. This will enable interrupts. */
433 configure();
434
435 #if defined(__SSP__) || defined(__SSP_ALL__)
436 {
437 #ifdef DIAGNOSTIC
438 printf("Initializing SSP:");
439 #endif
440 /*
441 * We initialize ssp here carefully:
442 * 1. after we got some entropy
443 * 2. without calling a function
444 */
445 size_t i;
446 long guard[__arraycount(__stack_chk_guard)];
447
448 arc4randbytes(guard, sizeof(guard));
449 for (i = 0; i < __arraycount(guard); i++)
450 __stack_chk_guard[i] = guard[i];
451 #ifdef DIAGNOSTIC
452 for (i = 0; i < __arraycount(guard); i++)
453 printf("%lx ", guard[i]);
454 printf("\n");
455 #endif
456 }
457 #endif
458 ubc_init(); /* must be after autoconfig */
459
460 /* Lock the kernel on behalf of proc0. */
461 KERNEL_LOCK(1, l);
462
463 #ifdef SYSTRACE
464 systrace_init();
465 #endif
466
467 #ifdef SYSVSHM
468 /* Initialize System V style shared memory. */
469 shminit();
470 #endif
471
472 #ifdef SYSVSEM
473 /* Initialize System V style semaphores. */
474 seminit();
475 #endif
476
477 #ifdef SYSVMSG
478 /* Initialize System V style message queues. */
479 msginit();
480 #endif
481
482 #ifdef P1003_1B_SEMAPHORE
483 /* Initialize posix semaphores */
484 ksem_init();
485 #endif
486
487 #if NVERIEXEC > 0
488 /*
489 * Initialise the Veriexec subsystem.
490 */
491 veriexec_init();
492 #endif /* NVERIEXEC > 0 */
493
494 #if defined(PAX_MPROTECT) || defined(PAX_SEGVGUARD)
495 pax_init();
496 #endif /* PAX_MPROTECT || PAX_SEGVGUARD */
497
498 /* Attach pseudo-devices. */
499 for (pdev = pdevinit; pdev->pdev_attach != NULL; pdev++)
500 (*pdev->pdev_attach)(pdev->pdev_count);
501
502 #ifdef FAST_IPSEC
503 /* Attach network crypto subsystem */
504 ipsec_attach();
505 #endif
506
507 /*
508 * Initialize protocols. Block reception of incoming packets
509 * until everything is ready.
510 */
511 s = splnet();
512 ifinit();
513 domaininit();
514 if_attachdomain();
515 splx(s);
516
517 #ifdef GPROF
518 /* Initialize kernel profiling. */
519 kmstartup();
520 #endif
521
522 /* Initialize system accouting. */
523 acct_init();
524
525 #ifndef PIPE_SOCKETPAIR
526 /* Initialize pipes. */
527 pipe_init();
528 #endif
529
530 /* Setup the scheduler */
531 sched_init();
532
533 #ifdef KTRACE
534 /* Initialize ktrace. */
535 ktrinit();
536 #endif
537
538 /* Initialize the UUID system calls. */
539 uuid_init();
540
541 /*
542 * Create process 1 (init(8)). We do this now, as Unix has
543 * historically had init be process 1, and changing this would
544 * probably upset a lot of people.
545 *
546 * Note that process 1 won't immediately exec init(8), but will
547 * wait for us to inform it that the root file system has been
548 * mounted.
549 */
550 if (fork1(l, 0, SIGCHLD, NULL, 0, start_init, NULL, NULL, &initproc))
551 panic("fork init");
552
553 /*
554 * Now that device driver threads have been created, wait for
555 * them to finish any deferred autoconfiguration.
556 */
557 while (config_pending)
558 (void) tsleep(&config_pending, PWAIT, "cfpend", hz);
559
560 /*
561 * Finalize configuration now that all real devices have been
562 * found. This needs to be done before the root device is
563 * selected, since finalization may create the root device.
564 */
565 config_finalize();
566
567 /*
568 * Now that autoconfiguration has completed, we can determine
569 * the root and dump devices.
570 */
571 cpu_rootconf();
572 cpu_dumpconf();
573
574 /* Mount the root file system. */
575 do {
576 domountroothook();
577 if ((error = vfs_mountroot())) {
578 printf("cannot mount root, error = %d\n", error);
579 boothowto |= RB_ASKNAME;
580 setroot(root_device,
581 (rootdev != NODEV) ? DISKPART(rootdev) : 0);
582 }
583 } while (error != 0);
584 mountroothook_destroy();
585
586 /*
587 * Initialise the time-of-day clock, passing the time recorded
588 * in the root filesystem (if any) for use by systems that
589 * don't have a non-volatile time-of-day device.
590 */
591 inittodr(rootfstime);
592
593 CIRCLEQ_FIRST(&mountlist)->mnt_flag |= MNT_ROOTFS;
594 CIRCLEQ_FIRST(&mountlist)->mnt_op->vfs_refcount++;
595
596 /*
597 * Get the vnode for '/'. Set filedesc0.fd_fd.fd_cdir to
598 * reference it.
599 */
600 error = VFS_ROOT(CIRCLEQ_FIRST(&mountlist), &rootvnode);
601 if (error)
602 panic("cannot find root vnode, error=%d", error);
603 cwdi0.cwdi_cdir = rootvnode;
604 VREF(cwdi0.cwdi_cdir);
605 VOP_UNLOCK(rootvnode, 0);
606 cwdi0.cwdi_rdir = NULL;
607
608 /*
609 * Now that root is mounted, we can fixup initproc's CWD
610 * info. All other processes are kthreads, which merely
611 * share proc0's CWD info.
612 */
613 initproc->p_cwdi->cwdi_cdir = rootvnode;
614 VREF(initproc->p_cwdi->cwdi_cdir);
615 initproc->p_cwdi->cwdi_rdir = NULL;
616
617 /*
618 * Now can look at time, having had a chance to verify the time
619 * from the file system. Reset l->l_rtime as it may have been
620 * munched in mi_switch() after the time got set.
621 */
622 #ifdef __HAVE_TIMECOUNTER
623 getmicrotime(&time);
624 #else
625 mono_time = time;
626 #endif
627 boottime = time;
628 mutex_enter(&proclist_lock);
629 LIST_FOREACH(p, &allproc, p_list) {
630 KASSERT((p->p_flag & PK_MARKER) == 0);
631 mutex_enter(&p->p_smutex);
632 p->p_stats->p_start = time;
633 LIST_FOREACH(l, &p->p_lwps, l_sibling) {
634 lwp_lock(l);
635 memset(&l->l_rtime, 0, sizeof(l->l_rtime));
636 lwp_unlock(l);
637 }
638 mutex_exit(&p->p_smutex);
639 }
640 mutex_exit(&proclist_lock);
641 binuptime(&curlwp->l_stime);
642
643 for (CPU_INFO_FOREACH(cii, ci)) {
644 ci->ci_schedstate.spc_lastmod = time_second;
645 }
646
647 /* Create the pageout daemon kernel thread. */
648 uvm_swap_init();
649 if (kthread_create(PRI_PGDAEMON, 0, NULL, uvm_pageout,
650 NULL, NULL, "pgdaemon"))
651 panic("fork pagedaemon");
652
653 /* Create the filesystem syncer kernel thread. */
654 if (kthread_create(PRI_IOFLUSH, 0, NULL, sched_sync, NULL, NULL, "ioflush"))
655 panic("fork syncer");
656
657 /* Create the aiodone daemon kernel thread. */
658 if (workqueue_create(&uvm.aiodone_queue, "aiodoned",
659 uvm_aiodone_worker, NULL, PRI_VM, IPL_BIO, 0))
660 panic("fork aiodoned");
661
662 vmem_rehash_start();
663
664 /* Initialize exec structures */
665 exec_init(1);
666
667 /*
668 * Okay, now we can let init(8) exec! It's off to userland!
669 */
670 start_init_exec = 1;
671 wakeup(&start_init_exec);
672
673 /* The scheduler is an infinite loop. */
674 uvm_scheduler();
675 /* NOTREACHED */
676 }
677
678 static void
679 check_console(struct lwp *l)
680 {
681 struct nameidata nd;
682 int error;
683
684 NDINIT(&nd, LOOKUP, FOLLOW, UIO_SYSSPACE, "/dev/console");
685 error = namei(&nd);
686 if (error == 0)
687 vrele(nd.ni_vp);
688 else if (error == ENOENT)
689 printf("warning: no /dev/console\n");
690 else
691 printf("warning: lookup /dev/console: error %d\n", error);
692 }
693
694 /*
695 * List of paths to try when searching for "init".
696 */
697 static const char * const initpaths[] = {
698 "/sbin/init",
699 "/sbin/oinit",
700 "/sbin/init.bak",
701 NULL,
702 };
703
704 /*
705 * Start the initial user process; try exec'ing each pathname in "initpaths".
706 * The program is invoked with one argument containing the boot flags.
707 */
708 static void
709 start_init(void *arg)
710 {
711 struct lwp *l = arg;
712 struct proc *p = l->l_proc;
713 vaddr_t addr;
714 struct sys_execve_args /* {
715 syscallarg(const char *) path;
716 syscallarg(char * const *) argp;
717 syscallarg(char * const *) envp;
718 } */ args;
719 int options, i, error;
720 register_t retval[2];
721 char flags[4], *flagsp;
722 const char *path, *slash;
723 char *ucp, **uap, *arg0, *arg1 = NULL;
724 char ipath[129];
725 int ipx, len;
726
727 /*
728 * Now in process 1.
729 */
730 strncpy(p->p_comm, "init", MAXCOMLEN);
731
732 /*
733 * Wait for main() to tell us that it's safe to exec.
734 */
735 while (start_init_exec == 0)
736 (void) tsleep(&start_init_exec, PWAIT, "initexec", 0);
737
738 /*
739 * This is not the right way to do this. We really should
740 * hand-craft a descriptor onto /dev/console to hand to init,
741 * but that's a _lot_ more work, and the benefit from this easy
742 * hack makes up for the "good is the enemy of the best" effect.
743 */
744 check_console(l);
745
746 /*
747 * Need just enough stack to hold the faked-up "execve()" arguments.
748 */
749 addr = (vaddr_t)STACK_ALLOC(USRSTACK, PAGE_SIZE);
750 if (uvm_map(&p->p_vmspace->vm_map, &addr, PAGE_SIZE,
751 NULL, UVM_UNKNOWN_OFFSET, 0,
752 UVM_MAPFLAG(UVM_PROT_ALL, UVM_PROT_ALL, UVM_INH_COPY,
753 UVM_ADV_NORMAL,
754 UVM_FLAG_FIXED|UVM_FLAG_OVERLAY|UVM_FLAG_COPYONW)) != 0)
755 panic("init: couldn't allocate argument space");
756 p->p_vmspace->vm_maxsaddr = (void *)STACK_MAX(addr, PAGE_SIZE);
757
758 ipx = 0;
759 while (1) {
760 if (boothowto & RB_ASKNAME) {
761 printf("init path");
762 if (initpaths[ipx])
763 printf(" (default %s)", initpaths[ipx]);
764 printf(": ");
765 len = cngetsn(ipath, sizeof(ipath)-1);
766 if (len == 0) {
767 if (initpaths[ipx])
768 path = initpaths[ipx++];
769 else
770 continue;
771 } else {
772 ipath[len] = '\0';
773 path = ipath;
774 }
775 } else {
776 if ((path = initpaths[ipx++]) == NULL)
777 break;
778 }
779
780 ucp = (char *)USRSTACK;
781
782 /*
783 * Construct the boot flag argument.
784 */
785 flagsp = flags;
786 *flagsp++ = '-';
787 options = 0;
788
789 if (boothowto & RB_SINGLE) {
790 *flagsp++ = 's';
791 options = 1;
792 }
793 #ifdef notyet
794 if (boothowto & RB_FASTBOOT) {
795 *flagsp++ = 'f';
796 options = 1;
797 }
798 #endif
799
800 /*
801 * Move out the flags (arg 1), if necessary.
802 */
803 if (options != 0) {
804 *flagsp++ = '\0';
805 i = flagsp - flags;
806 #ifdef DEBUG
807 printf("init: copying out flags `%s' %d\n", flags, i);
808 #endif
809 arg1 = STACK_ALLOC(ucp, i);
810 ucp = STACK_MAX(arg1, i);
811 (void)copyout((void *)flags, arg1, i);
812 }
813
814 /*
815 * Move out the file name (also arg 0).
816 */
817 i = strlen(path) + 1;
818 #ifdef DEBUG
819 printf("init: copying out path `%s' %d\n", path, i);
820 #else
821 if (boothowto & RB_ASKNAME || path != initpaths[0])
822 printf("init: trying %s\n", path);
823 #endif
824 arg0 = STACK_ALLOC(ucp, i);
825 ucp = STACK_MAX(arg0, i);
826 (void)copyout(path, arg0, i);
827
828 /*
829 * Move out the arg pointers.
830 */
831 ucp = (void *)STACK_ALIGN(ucp, ALIGNBYTES);
832 uap = (char **)STACK_ALLOC(ucp, sizeof(char *) * 3);
833 SCARG(&args, path) = arg0;
834 SCARG(&args, argp) = uap;
835 SCARG(&args, envp) = NULL;
836 slash = strrchr(path, '/');
837 if (slash)
838 (void)suword((void *)uap++,
839 (long)arg0 + (slash + 1 - path));
840 else
841 (void)suword((void *)uap++, (long)arg0);
842 if (options != 0)
843 (void)suword((void *)uap++, (long)arg1);
844 (void)suword((void *)uap++, 0); /* terminator */
845
846 /*
847 * Now try to exec the program. If can't for any reason
848 * other than it doesn't exist, complain.
849 */
850 error = sys_execve(l, &args, retval);
851 if (error == 0 || error == EJUSTRETURN) {
852 KERNEL_UNLOCK_LAST(l);
853 return;
854 }
855 printf("exec %s: error %d\n", path, error);
856 }
857 printf("init: not found\n");
858 panic("no init");
859 }
860