1# Makefile.in generated by automake 1.16.5 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2021 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17#
18#  Copyright 2005  Red Hat, Inc.
19#
20#  Permission to use, copy, modify, distribute, and sell this software and its
21#  documentation for any purpose is hereby granted without fee, provided that
22#  the above copyright notice appear in all copies and that both that
23#  copyright notice and this permission notice appear in supporting
24#  documentation, and that the name of Red Hat not be used in
25#  advertising or publicity pertaining to distribution of the software without
26#  specific, written prior permission.  Red Hat makes no
27#  representations about the suitability of this software for any purpose.  It
28#  is provided "as is" without express or implied warranty.
29#
30#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
31#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
32#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
33#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
34#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
35#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
36#  PERFORMANCE OF THIS SOFTWARE.
37
38VPATH = @srcdir@
39am__is_gnu_make = { \
40  if test -z '$(MAKELEVEL)'; then \
41    false; \
42  elif test -n '$(MAKE_HOST)'; then \
43    true; \
44  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
45    true; \
46  else \
47    false; \
48  fi; \
49}
50am__make_running_with_option = \
51  case $${target_option-} in \
52      ?) ;; \
53      *) echo "am__make_running_with_option: internal error: invalid" \
54              "target option '$${target_option-}' specified" >&2; \
55         exit 1;; \
56  esac; \
57  has_opt=no; \
58  sane_makeflags=$$MAKEFLAGS; \
59  if $(am__is_gnu_make); then \
60    sane_makeflags=$$MFLAGS; \
61  else \
62    case $$MAKEFLAGS in \
63      *\\[\ \	]*) \
64        bs=\\; \
65        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
66          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
67    esac; \
68  fi; \
69  skip_next=no; \
70  strip_trailopt () \
71  { \
72    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
73  }; \
74  for flg in $$sane_makeflags; do \
75    test $$skip_next = yes && { skip_next=no; continue; }; \
76    case $$flg in \
77      *=*|--*) continue;; \
78        -*I) strip_trailopt 'I'; skip_next=yes;; \
79      -*I?*) strip_trailopt 'I';; \
80        -*O) strip_trailopt 'O'; skip_next=yes;; \
81      -*O?*) strip_trailopt 'O';; \
82        -*l) strip_trailopt 'l'; skip_next=yes;; \
83      -*l?*) strip_trailopt 'l';; \
84      -[dEDm]) skip_next=yes;; \
85      -[JT]) skip_next=yes;; \
86    esac; \
87    case $$flg in \
88      *$$target_option*) has_opt=yes; break;; \
89    esac; \
90  done; \
91  test $$has_opt = yes
92am__make_dryrun = (target_option=n; $(am__make_running_with_option))
93am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
94pkgdatadir = $(datadir)/@PACKAGE@
95pkgincludedir = $(includedir)/@PACKAGE@
96pkglibdir = $(libdir)/@PACKAGE@
97pkglibexecdir = $(libexecdir)/@PACKAGE@
98am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
99install_sh_DATA = $(install_sh) -c -m 644
100install_sh_PROGRAM = $(install_sh) -c
101install_sh_SCRIPT = $(install_sh) -c
102INSTALL_HEADER = $(INSTALL_DATA)
103transform = $(program_transform_name)
104NORMAL_INSTALL = :
105PRE_INSTALL = :
106POST_INSTALL = :
107NORMAL_UNINSTALL = :
108PRE_UNINSTALL = :
109POST_UNINSTALL = :
110build_triplet = @build@
111host_triplet = @host@
112bin_PROGRAMS = fstobdf$(EXEEXT)
113subdir = .
114ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
115am__aclocal_m4_deps = $(top_srcdir)/configure.ac
116am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
117	$(ACLOCAL_M4)
118DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
119	$(am__configure_deps) $(am__DIST_COMMON)
120am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
121 configure.lineno config.status.lineno
122mkinstalldirs = $(install_sh) -d
123CONFIG_HEADER = config.h
124CONFIG_CLEAN_FILES =
125CONFIG_CLEAN_VPATH_FILES =
126am__installdirs = "$(DESTDIR)$(bindir)"
127PROGRAMS = $(bin_PROGRAMS)
128am_fstobdf_OBJECTS = chars.$(OBJEXT) fstobdf.$(OBJEXT) \
129	header.$(OBJEXT) props.$(OBJEXT)
130fstobdf_OBJECTS = $(am_fstobdf_OBJECTS)
131am__DEPENDENCIES_1 =
132fstobdf_DEPENDENCIES = $(am__DEPENDENCIES_1)
133AM_V_P = $(am__v_P_@AM_V@)
134am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
135am__v_P_0 = false
136am__v_P_1 = :
137AM_V_GEN = $(am__v_GEN_@AM_V@)
138am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
139am__v_GEN_0 = @echo "  GEN     " $@;
140am__v_GEN_1 = 
141AM_V_at = $(am__v_at_@AM_V@)
142am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
143am__v_at_0 = @
144am__v_at_1 = 
145DEFAULT_INCLUDES = -I.@am__isrc@
146depcomp = $(SHELL) $(top_srcdir)/depcomp
147am__maybe_remake_depfiles = depfiles
148am__depfiles_remade = ./$(DEPDIR)/chars.Po ./$(DEPDIR)/fstobdf.Po \
149	./$(DEPDIR)/header.Po ./$(DEPDIR)/props.Po
150am__mv = mv -f
151COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
152	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
153AM_V_CC = $(am__v_CC_@AM_V@)
154am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
155am__v_CC_0 = @echo "  CC      " $@;
156am__v_CC_1 = 
157CCLD = $(CC)
158LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
159AM_V_CCLD = $(am__v_CCLD_@AM_V@)
160am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
161am__v_CCLD_0 = @echo "  CCLD    " $@;
162am__v_CCLD_1 = 
163SOURCES = $(fstobdf_SOURCES)
164DIST_SOURCES = $(fstobdf_SOURCES)
165RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
166	ctags-recursive dvi-recursive html-recursive info-recursive \
167	install-data-recursive install-dvi-recursive \
168	install-exec-recursive install-html-recursive \
169	install-info-recursive install-pdf-recursive \
170	install-ps-recursive install-recursive installcheck-recursive \
171	installdirs-recursive pdf-recursive ps-recursive \
172	tags-recursive uninstall-recursive
173am__can_run_installinfo = \
174  case $$AM_UPDATE_INFO_DIR in \
175    n|no|NO) false;; \
176    *) (install-info --version) >/dev/null 2>&1;; \
177  esac
178RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
179  distclean-recursive maintainer-clean-recursive
180am__recursive_targets = \
181  $(RECURSIVE_TARGETS) \
182  $(RECURSIVE_CLEAN_TARGETS) \
183  $(am__extra_recursive_targets)
184AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
185	cscope distdir distdir-am dist dist-all distcheck
186am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
187	config.h.in
188# Read a list of newline-separated strings from the standard input,
189# and print each of them once, without duplicates.  Input order is
190# *not* preserved.
191am__uniquify_input = $(AWK) '\
192  BEGIN { nonempty = 0; } \
193  { items[$$0] = 1; nonempty = 1; } \
194  END { if (nonempty) { for (i in items) print i; }; } \
195'
196# Make sure the list of sources is unique.  This is necessary because,
197# e.g., the same source file might be shared among _SOURCES variables
198# for different programs/libraries.
199am__define_uniq_tagged_files = \
200  list='$(am__tagged_files)'; \
201  unique=`for i in $$list; do \
202    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
203  done | $(am__uniquify_input)`
204DIST_SUBDIRS = $(SUBDIRS)
205am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in COPYING \
206	ChangeLog INSTALL README.md compile config.guess config.sub \
207	depcomp install-sh missing
208DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
209distdir = $(PACKAGE)-$(VERSION)
210top_distdir = $(distdir)
211am__remove_distdir = \
212  if test -d "$(distdir)"; then \
213    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
214      && rm -rf "$(distdir)" \
215      || { sleep 5 && rm -rf "$(distdir)"; }; \
216  else :; fi
217am__post_remove_distdir = $(am__remove_distdir)
218am__relativize = \
219  dir0=`pwd`; \
220  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
221  sed_rest='s,^[^/]*/*,,'; \
222  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
223  sed_butlast='s,/*[^/]*$$,,'; \
224  while test -n "$$dir1"; do \
225    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
226    if test "$$first" != "."; then \
227      if test "$$first" = ".."; then \
228        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
229        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
230      else \
231        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
232        if test "$$first2" = "$$first"; then \
233          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
234        else \
235          dir2="../$$dir2"; \
236        fi; \
237        dir0="$$dir0"/"$$first"; \
238      fi; \
239    fi; \
240    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
241  done; \
242  reldir="$$dir2"
243DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
244GZIP_ENV = --best
245DIST_TARGETS = dist-xz dist-gzip
246# Exists only to be overridden by the user if desired.
247AM_DISTCHECK_DVI_TARGET = dvi
248distuninstallcheck_listfiles = find . -type f -print
249am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
250  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
251distcleancheck_listfiles = find . -type f -print
252ACLOCAL = @ACLOCAL@
253ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
254ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
255AMTAR = @AMTAR@
256AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
257APP_MAN_DIR = @APP_MAN_DIR@
258APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
259AUTOCONF = @AUTOCONF@
260AUTOHEADER = @AUTOHEADER@
261AUTOMAKE = @AUTOMAKE@
262AWK = @AWK@
263BASE_CFLAGS = @BASE_CFLAGS@
264CC = @CC@
265CCDEPMODE = @CCDEPMODE@
266CFLAGS = @CFLAGS@
267CHANGELOG_CMD = @CHANGELOG_CMD@
268CPPFLAGS = @CPPFLAGS@
269CSCOPE = @CSCOPE@
270CTAGS = @CTAGS@
271CWARNFLAGS = @CWARNFLAGS@
272CYGPATH_W = @CYGPATH_W@
273DEFS = @DEFS@
274DEPDIR = @DEPDIR@
275DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
276DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
277ECHO_C = @ECHO_C@
278ECHO_N = @ECHO_N@
279ECHO_T = @ECHO_T@
280ETAGS = @ETAGS@
281EXEEXT = @EXEEXT@
282FILE_MAN_DIR = @FILE_MAN_DIR@
283FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
284FSTOBDF_CFLAGS = @FSTOBDF_CFLAGS@
285FSTOBDF_LIBS = @FSTOBDF_LIBS@
286INSTALL = @INSTALL@
287INSTALL_CMD = @INSTALL_CMD@
288INSTALL_DATA = @INSTALL_DATA@
289INSTALL_PROGRAM = @INSTALL_PROGRAM@
290INSTALL_SCRIPT = @INSTALL_SCRIPT@
291INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
292LDFLAGS = @LDFLAGS@
293LIBOBJS = @LIBOBJS@
294LIBS = @LIBS@
295LIB_MAN_DIR = @LIB_MAN_DIR@
296LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
297LTLIBOBJS = @LTLIBOBJS@
298MAKEINFO = @MAKEINFO@
299MAN_SUBSTS = @MAN_SUBSTS@
300MISC_MAN_DIR = @MISC_MAN_DIR@
301MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
302MKDIR_P = @MKDIR_P@
303OBJEXT = @OBJEXT@
304PACKAGE = @PACKAGE@
305PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
306PACKAGE_NAME = @PACKAGE_NAME@
307PACKAGE_STRING = @PACKAGE_STRING@
308PACKAGE_TARNAME = @PACKAGE_TARNAME@
309PACKAGE_URL = @PACKAGE_URL@
310PACKAGE_VERSION = @PACKAGE_VERSION@
311PATH_SEPARATOR = @PATH_SEPARATOR@
312PKG_CONFIG = @PKG_CONFIG@
313PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
314PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
315SED = @SED@
316SET_MAKE = @SET_MAKE@
317SHELL = @SHELL@
318STRICT_CFLAGS = @STRICT_CFLAGS@
319STRIP = @STRIP@
320VERSION = @VERSION@
321XORG_MAN_PAGE = @XORG_MAN_PAGE@
322abs_builddir = @abs_builddir@
323abs_srcdir = @abs_srcdir@
324abs_top_builddir = @abs_top_builddir@
325abs_top_srcdir = @abs_top_srcdir@
326ac_ct_CC = @ac_ct_CC@
327am__include = @am__include@
328am__leading_dot = @am__leading_dot@
329am__quote = @am__quote@
330am__tar = @am__tar@
331am__untar = @am__untar@
332bindir = @bindir@
333build = @build@
334build_alias = @build_alias@
335build_cpu = @build_cpu@
336build_os = @build_os@
337build_vendor = @build_vendor@
338builddir = @builddir@
339datadir = @datadir@
340datarootdir = @datarootdir@
341docdir = @docdir@
342dvidir = @dvidir@
343exec_prefix = @exec_prefix@
344host = @host@
345host_alias = @host_alias@
346host_cpu = @host_cpu@
347host_os = @host_os@
348host_vendor = @host_vendor@
349htmldir = @htmldir@
350includedir = @includedir@
351infodir = @infodir@
352install_sh = @install_sh@
353libdir = @libdir@
354libexecdir = @libexecdir@
355localedir = @localedir@
356localstatedir = @localstatedir@
357mandir = @mandir@
358mkdir_p = @mkdir_p@
359oldincludedir = @oldincludedir@
360pdfdir = @pdfdir@
361prefix = @prefix@
362program_transform_name = @program_transform_name@
363psdir = @psdir@
364runstatedir = @runstatedir@
365sbindir = @sbindir@
366sharedstatedir = @sharedstatedir@
367srcdir = @srcdir@
368sysconfdir = @sysconfdir@
369target_alias = @target_alias@
370top_build_prefix = @top_build_prefix@
371top_builddir = @top_builddir@
372top_srcdir = @top_srcdir@
373SUBDIRS = man
374AM_CFLAGS = $(FSTOBDF_CFLAGS) $(CWARNFLAGS)
375fstobdf_LDADD = $(FSTOBDF_LIBS)
376fstobdf_SOURCES = \
377        chars.c \
378        fstobdf.c \
379        fstobdf.h \
380        header.c \
381        props.c
382
383MAINTAINERCLEANFILES = ChangeLog INSTALL
384EXTRA_DIST = README.md
385all: config.h
386	$(MAKE) $(AM_MAKEFLAGS) all-recursive
387
388.SUFFIXES:
389.SUFFIXES: .c .o .obj
390am--refresh: Makefile
391	@:
392$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
393	@for dep in $?; do \
394	  case '$(am__configure_deps)' in \
395	    *$$dep*) \
396	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
397	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
398		&& exit 0; \
399	      exit 1;; \
400	  esac; \
401	done; \
402	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
403	$(am__cd) $(top_srcdir) && \
404	  $(AUTOMAKE) --foreign Makefile
405Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
406	@case '$?' in \
407	  *config.status*) \
408	    echo ' $(SHELL) ./config.status'; \
409	    $(SHELL) ./config.status;; \
410	  *) \
411	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
412	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
413	esac;
414
415$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
416	$(SHELL) ./config.status --recheck
417
418$(top_srcdir)/configure:  $(am__configure_deps)
419	$(am__cd) $(srcdir) && $(AUTOCONF)
420$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
421	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
422$(am__aclocal_m4_deps):
423
424config.h: stamp-h1
425	@test -f $@ || rm -f stamp-h1
426	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
427
428stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
429	@rm -f stamp-h1
430	cd $(top_builddir) && $(SHELL) ./config.status config.h
431$(srcdir)/config.h.in:  $(am__configure_deps) 
432	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
433	rm -f stamp-h1
434	touch $@
435
436distclean-hdr:
437	-rm -f config.h stamp-h1
438install-binPROGRAMS: $(bin_PROGRAMS)
439	@$(NORMAL_INSTALL)
440	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
441	if test -n "$$list"; then \
442	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
443	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
444	fi; \
445	for p in $$list; do echo "$$p $$p"; done | \
446	sed 's/$(EXEEXT)$$//' | \
447	while read p p1; do if test -f $$p \
448	  ; then echo "$$p"; echo "$$p"; else :; fi; \
449	done | \
450	sed -e 'p;s,.*/,,;n;h' \
451	    -e 's|.*|.|' \
452	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
453	sed 'N;N;N;s,\n, ,g' | \
454	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
455	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
456	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
457	    else { print "f", $$3 "/" $$4, $$1; } } \
458	  END { for (d in files) print "f", d, files[d] }' | \
459	while read type dir files; do \
460	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
461	    test -z "$$files" || { \
462	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
463	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
464	    } \
465	; done
466
467uninstall-binPROGRAMS:
468	@$(NORMAL_UNINSTALL)
469	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
470	files=`for p in $$list; do echo "$$p"; done | \
471	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
472	      -e 's/$$/$(EXEEXT)/' \
473	`; \
474	test -n "$$list" || exit 0; \
475	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
476	cd "$(DESTDIR)$(bindir)" && rm -f $$files
477
478clean-binPROGRAMS:
479	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
480
481fstobdf$(EXEEXT): $(fstobdf_OBJECTS) $(fstobdf_DEPENDENCIES) $(EXTRA_fstobdf_DEPENDENCIES) 
482	@rm -f fstobdf$(EXEEXT)
483	$(AM_V_CCLD)$(LINK) $(fstobdf_OBJECTS) $(fstobdf_LDADD) $(LIBS)
484
485mostlyclean-compile:
486	-rm -f *.$(OBJEXT)
487
488distclean-compile:
489	-rm -f *.tab.c
490
491@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/chars.Po@am__quote@ # am--include-marker
492@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fstobdf.Po@am__quote@ # am--include-marker
493@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/header.Po@am__quote@ # am--include-marker
494@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/props.Po@am__quote@ # am--include-marker
495
496$(am__depfiles_remade):
497	@$(MKDIR_P) $(@D)
498	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
499
500am--depfiles: $(am__depfiles_remade)
501
502.c.o:
503@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
504@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
505@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
506@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
507@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
508
509.c.obj:
510@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
511@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
512@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
513@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
514@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
515
516# This directory's subdirectories are mostly independent; you can cd
517# into them and run 'make' without going through this Makefile.
518# To change the values of 'make' variables: instead of editing Makefiles,
519# (1) if the variable is set in 'config.status', edit 'config.status'
520#     (which will cause the Makefiles to be regenerated when you run 'make');
521# (2) otherwise, pass the desired values on the 'make' command line.
522$(am__recursive_targets):
523	@fail=; \
524	if $(am__make_keepgoing); then \
525	  failcom='fail=yes'; \
526	else \
527	  failcom='exit 1'; \
528	fi; \
529	dot_seen=no; \
530	target=`echo $@ | sed s/-recursive//`; \
531	case "$@" in \
532	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
533	  *) list='$(SUBDIRS)' ;; \
534	esac; \
535	for subdir in $$list; do \
536	  echo "Making $$target in $$subdir"; \
537	  if test "$$subdir" = "."; then \
538	    dot_seen=yes; \
539	    local_target="$$target-am"; \
540	  else \
541	    local_target="$$target"; \
542	  fi; \
543	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
544	  || eval $$failcom; \
545	done; \
546	if test "$$dot_seen" = "no"; then \
547	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
548	fi; test -z "$$fail"
549
550ID: $(am__tagged_files)
551	$(am__define_uniq_tagged_files); mkid -fID $$unique
552tags: tags-recursive
553TAGS: tags
554
555tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
556	set x; \
557	here=`pwd`; \
558	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
559	  include_option=--etags-include; \
560	  empty_fix=.; \
561	else \
562	  include_option=--include; \
563	  empty_fix=; \
564	fi; \
565	list='$(SUBDIRS)'; for subdir in $$list; do \
566	  if test "$$subdir" = .; then :; else \
567	    test ! -f $$subdir/TAGS || \
568	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
569	  fi; \
570	done; \
571	$(am__define_uniq_tagged_files); \
572	shift; \
573	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
574	  test -n "$$unique" || unique=$$empty_fix; \
575	  if test $$# -gt 0; then \
576	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
577	      "$$@" $$unique; \
578	  else \
579	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
580	      $$unique; \
581	  fi; \
582	fi
583ctags: ctags-recursive
584
585CTAGS: ctags
586ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
587	$(am__define_uniq_tagged_files); \
588	test -z "$(CTAGS_ARGS)$$unique" \
589	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
590	     $$unique
591
592GTAGS:
593	here=`$(am__cd) $(top_builddir) && pwd` \
594	  && $(am__cd) $(top_srcdir) \
595	  && gtags -i $(GTAGS_ARGS) "$$here"
596cscope: cscope.files
597	test ! -s cscope.files \
598	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
599clean-cscope:
600	-rm -f cscope.files
601cscope.files: clean-cscope cscopelist
602cscopelist: cscopelist-recursive
603
604cscopelist-am: $(am__tagged_files)
605	list='$(am__tagged_files)'; \
606	case "$(srcdir)" in \
607	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
608	  *) sdir=$(subdir)/$(srcdir) ;; \
609	esac; \
610	for i in $$list; do \
611	  if test -f "$$i"; then \
612	    echo "$(subdir)/$$i"; \
613	  else \
614	    echo "$$sdir/$$i"; \
615	  fi; \
616	done >> $(top_builddir)/cscope.files
617
618distclean-tags:
619	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
620	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
621distdir: $(BUILT_SOURCES)
622	$(MAKE) $(AM_MAKEFLAGS) distdir-am
623
624distdir-am: $(DISTFILES)
625	$(am__remove_distdir)
626	test -d "$(distdir)" || mkdir "$(distdir)"
627	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
628	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
629	list='$(DISTFILES)'; \
630	  dist_files=`for file in $$list; do echo $$file; done | \
631	  sed -e "s|^$$srcdirstrip/||;t" \
632	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
633	case $$dist_files in \
634	  */*) $(MKDIR_P) `echo "$$dist_files" | \
635			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
636			   sort -u` ;; \
637	esac; \
638	for file in $$dist_files; do \
639	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
640	  if test -d $$d/$$file; then \
641	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
642	    if test -d "$(distdir)/$$file"; then \
643	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
644	    fi; \
645	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
646	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
647	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
648	    fi; \
649	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
650	  else \
651	    test -f "$(distdir)/$$file" \
652	    || cp -p $$d/$$file "$(distdir)/$$file" \
653	    || exit 1; \
654	  fi; \
655	done
656	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
657	  if test "$$subdir" = .; then :; else \
658	    $(am__make_dryrun) \
659	      || test -d "$(distdir)/$$subdir" \
660	      || $(MKDIR_P) "$(distdir)/$$subdir" \
661	      || exit 1; \
662	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
663	    $(am__relativize); \
664	    new_distdir=$$reldir; \
665	    dir1=$$subdir; dir2="$(top_distdir)"; \
666	    $(am__relativize); \
667	    new_top_distdir=$$reldir; \
668	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
669	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
670	    ($(am__cd) $$subdir && \
671	      $(MAKE) $(AM_MAKEFLAGS) \
672	        top_distdir="$$new_top_distdir" \
673	        distdir="$$new_distdir" \
674		am__remove_distdir=: \
675		am__skip_length_check=: \
676		am__skip_mode_fix=: \
677	        distdir) \
678	      || exit 1; \
679	  fi; \
680	done
681	$(MAKE) $(AM_MAKEFLAGS) \
682	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
683	  dist-hook
684	-test -n "$(am__skip_mode_fix)" \
685	|| find "$(distdir)" -type d ! -perm -755 \
686		-exec chmod u+rwx,go+rx {} \; -o \
687	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
688	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
689	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
690	|| chmod -R a+r "$(distdir)"
691dist-gzip: distdir
692	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
693	$(am__post_remove_distdir)
694
695dist-bzip2: distdir
696	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
697	$(am__post_remove_distdir)
698
699dist-lzip: distdir
700	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
701	$(am__post_remove_distdir)
702dist-xz: distdir
703	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
704	$(am__post_remove_distdir)
705
706dist-zstd: distdir
707	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
708	$(am__post_remove_distdir)
709
710dist-tarZ: distdir
711	@echo WARNING: "Support for distribution archives compressed with" \
712		       "legacy program 'compress' is deprecated." >&2
713	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
714	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
715	$(am__post_remove_distdir)
716
717dist-shar: distdir
718	@echo WARNING: "Support for shar distribution archives is" \
719	               "deprecated." >&2
720	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
721	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
722	$(am__post_remove_distdir)
723
724dist-zip: distdir
725	-rm -f $(distdir).zip
726	zip -rq $(distdir).zip $(distdir)
727	$(am__post_remove_distdir)
728
729dist dist-all:
730	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
731	$(am__post_remove_distdir)
732
733# This target untars the dist file and tries a VPATH configuration.  Then
734# it guarantees that the distribution is self-contained by making another
735# tarfile.
736distcheck: dist
737	case '$(DIST_ARCHIVES)' in \
738	*.tar.gz*) \
739	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
740	*.tar.bz2*) \
741	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
742	*.tar.lz*) \
743	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
744	*.tar.xz*) \
745	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
746	*.tar.Z*) \
747	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
748	*.shar.gz*) \
749	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
750	*.zip*) \
751	  unzip $(distdir).zip ;;\
752	*.tar.zst*) \
753	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
754	esac
755	chmod -R a-w $(distdir)
756	chmod u+w $(distdir)
757	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
758	chmod a-w $(distdir)
759	test -d $(distdir)/_build || exit 0; \
760	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
761	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
762	  && am__cwd=`pwd` \
763	  && $(am__cd) $(distdir)/_build/sub \
764	  && ../../configure \
765	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
766	    $(DISTCHECK_CONFIGURE_FLAGS) \
767	    --srcdir=../.. --prefix="$$dc_install_base" \
768	  && $(MAKE) $(AM_MAKEFLAGS) \
769	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
770	  && $(MAKE) $(AM_MAKEFLAGS) check \
771	  && $(MAKE) $(AM_MAKEFLAGS) install \
772	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
773	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
774	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
775	        distuninstallcheck \
776	  && chmod -R a-w "$$dc_install_base" \
777	  && ({ \
778	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
779	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
780	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
781	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
782	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
783	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
784	  && rm -rf "$$dc_destdir" \
785	  && $(MAKE) $(AM_MAKEFLAGS) dist \
786	  && rm -rf $(DIST_ARCHIVES) \
787	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
788	  && cd "$$am__cwd" \
789	  || exit 1
790	$(am__post_remove_distdir)
791	@(echo "$(distdir) archives ready for distribution: "; \
792	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
793	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
794distuninstallcheck:
795	@test -n '$(distuninstallcheck_dir)' || { \
796	  echo 'ERROR: trying to run $@ with an empty' \
797	       '$$(distuninstallcheck_dir)' >&2; \
798	  exit 1; \
799	}; \
800	$(am__cd) '$(distuninstallcheck_dir)' || { \
801	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
802	  exit 1; \
803	}; \
804	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
805	   || { echo "ERROR: files left after uninstall:" ; \
806	        if test -n "$(DESTDIR)"; then \
807	          echo "  (check DESTDIR support)"; \
808	        fi ; \
809	        $(distuninstallcheck_listfiles) ; \
810	        exit 1; } >&2
811distcleancheck: distclean
812	@if test '$(srcdir)' = . ; then \
813	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
814	  exit 1 ; \
815	fi
816	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
817	  || { echo "ERROR: files left in build directory after distclean:" ; \
818	       $(distcleancheck_listfiles) ; \
819	       exit 1; } >&2
820check-am: all-am
821check: check-recursive
822all-am: Makefile $(PROGRAMS) config.h
823installdirs: installdirs-recursive
824installdirs-am:
825	for dir in "$(DESTDIR)$(bindir)"; do \
826	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
827	done
828install: install-recursive
829install-exec: install-exec-recursive
830install-data: install-data-recursive
831uninstall: uninstall-recursive
832
833install-am: all-am
834	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
835
836installcheck: installcheck-recursive
837install-strip:
838	if test -z '$(STRIP)'; then \
839	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
840	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
841	      install; \
842	else \
843	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
844	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
845	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
846	fi
847mostlyclean-generic:
848
849clean-generic:
850
851distclean-generic:
852	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
853	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
854
855maintainer-clean-generic:
856	@echo "This command is intended for maintainers to use"
857	@echo "it deletes files that may require special tools to rebuild."
858	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
859clean: clean-recursive
860
861clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
862
863distclean: distclean-recursive
864	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
865		-rm -f ./$(DEPDIR)/chars.Po
866	-rm -f ./$(DEPDIR)/fstobdf.Po
867	-rm -f ./$(DEPDIR)/header.Po
868	-rm -f ./$(DEPDIR)/props.Po
869	-rm -f Makefile
870distclean-am: clean-am distclean-compile distclean-generic \
871	distclean-hdr distclean-tags
872
873dvi: dvi-recursive
874
875dvi-am:
876
877html: html-recursive
878
879html-am:
880
881info: info-recursive
882
883info-am:
884
885install-data-am:
886
887install-dvi: install-dvi-recursive
888
889install-dvi-am:
890
891install-exec-am: install-binPROGRAMS
892
893install-html: install-html-recursive
894
895install-html-am:
896
897install-info: install-info-recursive
898
899install-info-am:
900
901install-man:
902
903install-pdf: install-pdf-recursive
904
905install-pdf-am:
906
907install-ps: install-ps-recursive
908
909install-ps-am:
910
911installcheck-am:
912
913maintainer-clean: maintainer-clean-recursive
914	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
915	-rm -rf $(top_srcdir)/autom4te.cache
916		-rm -f ./$(DEPDIR)/chars.Po
917	-rm -f ./$(DEPDIR)/fstobdf.Po
918	-rm -f ./$(DEPDIR)/header.Po
919	-rm -f ./$(DEPDIR)/props.Po
920	-rm -f Makefile
921maintainer-clean-am: distclean-am maintainer-clean-generic
922
923mostlyclean: mostlyclean-recursive
924
925mostlyclean-am: mostlyclean-compile mostlyclean-generic
926
927pdf: pdf-recursive
928
929pdf-am:
930
931ps: ps-recursive
932
933ps-am:
934
935uninstall-am: uninstall-binPROGRAMS
936
937.MAKE: $(am__recursive_targets) all install-am install-strip
938
939.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
940	am--depfiles am--refresh check check-am clean \
941	clean-binPROGRAMS clean-cscope clean-generic cscope \
942	cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
943	dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
944	dist-zip dist-zstd distcheck distclean distclean-compile \
945	distclean-generic distclean-hdr distclean-tags distcleancheck \
946	distdir distuninstallcheck dvi dvi-am html html-am info \
947	info-am install install-am install-binPROGRAMS install-data \
948	install-data-am install-dvi install-dvi-am install-exec \
949	install-exec-am install-html install-html-am install-info \
950	install-info-am install-man install-pdf install-pdf-am \
951	install-ps install-ps-am install-strip installcheck \
952	installcheck-am installdirs installdirs-am maintainer-clean \
953	maintainer-clean-generic mostlyclean mostlyclean-compile \
954	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
955	uninstall-am uninstall-binPROGRAMS
956
957.PRECIOUS: Makefile
958
959
960.PHONY: ChangeLog INSTALL
961
962INSTALL:
963	$(INSTALL_CMD)
964
965ChangeLog:
966	$(CHANGELOG_CMD)
967
968dist-hook: ChangeLog INSTALL
969
970# Tell versions [3.59,3.63) of GNU make to not export all variables.
971# Otherwise a system limit (for SysV at least) may be exceeded.
972.NOEXPORT:
973