Makefile.in revision 88de56cc
1# Makefile.in generated by automake 1.11.1 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 5# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, 6# Inc. 7# This Makefile.in is free software; the Free Software Foundation 8# gives unlimited permission to copy and/or distribute it, 9# with or without modifications, as long as this notice is preserved. 10 11# This program is distributed in the hope that it will be useful, 12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 14# PARTICULAR PURPOSE. 15 16@SET_MAKE@ 17VPATH = @srcdir@ 18pkgdatadir = $(datadir)/@PACKAGE@ 19pkgincludedir = $(includedir)/@PACKAGE@ 20pkglibdir = $(libdir)/@PACKAGE@ 21pkglibexecdir = $(libexecdir)/@PACKAGE@ 22am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 23install_sh_DATA = $(install_sh) -c -m 644 24install_sh_PROGRAM = $(install_sh) -c 25install_sh_SCRIPT = $(install_sh) -c 26INSTALL_HEADER = $(INSTALL_DATA) 27transform = $(program_transform_name) 28NORMAL_INSTALL = : 29PRE_INSTALL = : 30POST_INSTALL = : 31NORMAL_UNINSTALL = : 32PRE_UNINSTALL = : 33POST_UNINSTALL = : 34build_triplet = @build@ 35host_triplet = @host@ 36subdir = specs 37DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in 38ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 39am__aclocal_m4_deps = $(top_srcdir)/m4/ax_define_dir.m4 \ 40 $(top_srcdir)/m4/dolt.m4 $(top_srcdir)/configure.ac 41am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 42 $(ACLOCAL_M4) 43mkinstalldirs = $(install_sh) -d 44CONFIG_HEADER = $(top_builddir)/src/config.h \ 45 $(top_builddir)/include/X11/XlibConf.h 46CONFIG_CLEAN_FILES = 47CONFIG_CLEAN_VPATH_FILES = 48AM_V_GEN = $(am__v_GEN_$(V)) 49am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) 50am__v_GEN_0 = @echo " GEN " $@; 51AM_V_at = $(am__v_at_$(V)) 52am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) 53am__v_at_0 = @ 54SOURCES = 55DIST_SOURCES = 56RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ 57 html-recursive info-recursive install-data-recursive \ 58 install-dvi-recursive install-exec-recursive \ 59 install-html-recursive install-info-recursive \ 60 install-pdf-recursive install-ps-recursive install-recursive \ 61 installcheck-recursive installdirs-recursive pdf-recursive \ 62 ps-recursive uninstall-recursive 63RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 64 distclean-recursive maintainer-clean-recursive 65AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ 66 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ 67 distdir 68ETAGS = etags 69CTAGS = ctags 70DIST_SUBDIRS = $(SUBDIRS) 71DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 72am__relativize = \ 73 dir0=`pwd`; \ 74 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 75 sed_rest='s,^[^/]*/*,,'; \ 76 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 77 sed_butlast='s,/*[^/]*$$,,'; \ 78 while test -n "$$dir1"; do \ 79 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 80 if test "$$first" != "."; then \ 81 if test "$$first" = ".."; then \ 82 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 83 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 84 else \ 85 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 86 if test "$$first2" = "$$first"; then \ 87 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 88 else \ 89 dir2="../$$dir2"; \ 90 fi; \ 91 dir0="$$dir0"/"$$first"; \ 92 fi; \ 93 fi; \ 94 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 95 done; \ 96 reldir="$$dir2" 97ACLOCAL = @ACLOCAL@ 98ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ 99ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ 100AMTAR = @AMTAR@ 101AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 102APP_MAN_DIR = @APP_MAN_DIR@ 103APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ 104AR = @AR@ 105AUTOCONF = @AUTOCONF@ 106AUTOHEADER = @AUTOHEADER@ 107AUTOMAKE = @AUTOMAKE@ 108AWK = @AWK@ 109BIGFONT_CFLAGS = @BIGFONT_CFLAGS@ 110BIGFONT_LIBS = @BIGFONT_LIBS@ 111CC = @CC@ 112CCDEPMODE = @CCDEPMODE@ 113CC_FOR_BUILD = @CC_FOR_BUILD@ 114CFLAGS = @CFLAGS@ 115CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@ 116CHANGELOG_CMD = @CHANGELOG_CMD@ 117CPP = @CPP@ 118CPPFLAGS = @CPPFLAGS@ 119CPPFLAGS_FOR_BUILD = @CPPFLAGS_FOR_BUILD@ 120CWARNFLAGS = @CWARNFLAGS@ 121CYGPATH_W = @CYGPATH_W@ 122DEFS = @DEFS@ 123DEPDIR = @DEPDIR@ 124DOLT_BASH = @DOLT_BASH@ 125DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ 126DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ 127DSYMUTIL = @DSYMUTIL@ 128DUMPBIN = @DUMPBIN@ 129ECHO_C = @ECHO_C@ 130ECHO_N = @ECHO_N@ 131ECHO_T = @ECHO_T@ 132EGREP = @EGREP@ 133EXEEXT = @EXEEXT@ 134FGREP = @FGREP@ 135FILE_MAN_DIR = @FILE_MAN_DIR@ 136FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ 137GREP = @GREP@ 138GROFF = @GROFF@ 139I18N_MODULE_LIBS = @I18N_MODULE_LIBS@ 140INSTALL = @INSTALL@ 141INSTALL_CMD = @INSTALL_CMD@ 142INSTALL_DATA = @INSTALL_DATA@ 143INSTALL_PROGRAM = @INSTALL_PROGRAM@ 144INSTALL_SCRIPT = @INSTALL_SCRIPT@ 145INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 146KEYSYMDEF = @KEYSYMDEF@ 147LAUNCHD = @LAUNCHD@ 148LD = @LD@ 149LDFLAGS = @LDFLAGS@ 150LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@ 151LIBOBJS = @LIBOBJS@ 152LIBS = @LIBS@ 153LIBTOOL = @LIBTOOL@ 154LIB_MAN_DIR = @LIB_MAN_DIR@ 155LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ 156LINT = @LINT@ 157LINTLIB = @LINTLIB@ 158LINT_FLAGS = @LINT_FLAGS@ 159LIPO = @LIPO@ 160LN_S = @LN_S@ 161LTCOMPILE = @LTCOMPILE@ 162LTCXXCOMPILE = @LTCXXCOMPILE@ 163LTLIBOBJS = @LTLIBOBJS@ 164MAINT = @MAINT@ 165MAKEINFO = @MAKEINFO@ 166MALLOC_ZERO_CFLAGS = @MALLOC_ZERO_CFLAGS@ 167MAN_SUBSTS = @MAN_SUBSTS@ 168MISC_MAN_DIR = @MISC_MAN_DIR@ 169MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ 170MKDIR_P = @MKDIR_P@ 171NM = @NM@ 172NMEDIT = @NMEDIT@ 173OBJDUMP = @OBJDUMP@ 174OBJEXT = @OBJEXT@ 175OTOOL = @OTOOL@ 176OTOOL64 = @OTOOL64@ 177PACKAGE = @PACKAGE@ 178PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 179PACKAGE_NAME = @PACKAGE_NAME@ 180PACKAGE_STRING = @PACKAGE_STRING@ 181PACKAGE_TARNAME = @PACKAGE_TARNAME@ 182PACKAGE_URL = @PACKAGE_URL@ 183PACKAGE_VERSION = @PACKAGE_VERSION@ 184PATH_SEPARATOR = @PATH_SEPARATOR@ 185PERL = @PERL@ 186PKG_CONFIG = @PKG_CONFIG@ 187PS2PDF = @PS2PDF@ 188RANLIB = @RANLIB@ 189RAWCPP = @RAWCPP@ 190RAWCPPFLAGS = @RAWCPPFLAGS@ 191SED = @SED@ 192SET_MAKE = @SET_MAKE@ 193SHELL = @SHELL@ 194STRIP = @STRIP@ 195VERSION = @VERSION@ 196WCHAR32 = @WCHAR32@ 197X11_CFLAGS = @X11_CFLAGS@ 198X11_DATADIR = @X11_DATADIR@ 199X11_EXTRA_DEPS = @X11_EXTRA_DEPS@ 200X11_LIBDIR = @X11_LIBDIR@ 201X11_LIBS = @X11_LIBS@ 202X11_LOCALEDATADIR = @X11_LOCALEDATADIR@ 203X11_LOCALEDIR = @X11_LOCALEDIR@ 204X11_LOCALELIBDIR = @X11_LOCALELIBDIR@ 205XDMCP_CFLAGS = @XDMCP_CFLAGS@ 206XDMCP_LIBS = @XDMCP_LIBS@ 207XERRORDB = @XERRORDB@ 208XKBPROTO_REQUIRES = @XKBPROTO_REQUIRES@ 209XKEYSYMDB = @XKEYSYMDB@ 210XLOCALEDATADIR = @XLOCALEDATADIR@ 211XLOCALEDIR = @XLOCALEDIR@ 212XLOCALELIBDIR = @XLOCALELIBDIR@ 213XMALLOC_ZERO_CFLAGS = @XMALLOC_ZERO_CFLAGS@ 214XORG_MAN_PAGE = @XORG_MAN_PAGE@ 215XTHREADLIB = @XTHREADLIB@ 216XTHREAD_CFLAGS = @XTHREAD_CFLAGS@ 217XTMALLOC_ZERO_CFLAGS = @XTMALLOC_ZERO_CFLAGS@ 218abs_builddir = @abs_builddir@ 219abs_srcdir = @abs_srcdir@ 220abs_top_builddir = @abs_top_builddir@ 221abs_top_srcdir = @abs_top_srcdir@ 222ac_ct_CC = @ac_ct_CC@ 223ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 224am__include = @am__include@ 225am__leading_dot = @am__leading_dot@ 226am__quote = @am__quote@ 227am__tar = @am__tar@ 228am__untar = @am__untar@ 229bindir = @bindir@ 230build = @build@ 231build_alias = @build_alias@ 232build_cpu = @build_cpu@ 233build_os = @build_os@ 234build_vendor = @build_vendor@ 235builddir = @builddir@ 236datadir = @datadir@ 237datarootdir = @datarootdir@ 238docdir = @docdir@ 239dvidir = @dvidir@ 240exec_prefix = @exec_prefix@ 241host = @host@ 242host_alias = @host_alias@ 243host_cpu = @host_cpu@ 244host_os = @host_os@ 245host_vendor = @host_vendor@ 246htmldir = @htmldir@ 247includedir = @includedir@ 248infodir = @infodir@ 249install_sh = @install_sh@ 250libdir = @libdir@ 251libexecdir = @libexecdir@ 252localedir = @localedir@ 253localstatedir = @localstatedir@ 254lt_ECHO = @lt_ECHO@ 255mandir = @mandir@ 256mkdir_p = @mkdir_p@ 257oldincludedir = @oldincludedir@ 258pdfdir = @pdfdir@ 259prefix = @prefix@ 260program_transform_name = @program_transform_name@ 261psdir = @psdir@ 262sbindir = @sbindir@ 263sharedstatedir = @sharedstatedir@ 264srcdir = @srcdir@ 265sysconfdir = @sysconfdir@ 266target_alias = @target_alias@ 267top_build_prefix = @top_build_prefix@ 268top_builddir = @top_builddir@ 269top_srcdir = @top_srcdir@ 270SUBDIRS = libX11 i18n XIM 271EXTRA_DIST = troffrules.in macros.t 272all: all-recursive 273 274.SUFFIXES: 275$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) 276 @for dep in $?; do \ 277 case '$(am__configure_deps)' in \ 278 *$$dep*) \ 279 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ 280 && { if test -f $@; then exit 0; else break; fi; }; \ 281 exit 1;; \ 282 esac; \ 283 done; \ 284 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign specs/Makefile'; \ 285 $(am__cd) $(top_srcdir) && \ 286 $(AUTOMAKE) --foreign specs/Makefile 287.PRECIOUS: Makefile 288Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 289 @case '$?' in \ 290 *config.status*) \ 291 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ 292 *) \ 293 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ 294 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ 295 esac; 296 297$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 298 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 299 300$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 301 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 302$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) 303 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 304$(am__aclocal_m4_deps): 305 306mostlyclean-libtool: 307 -rm -f *.lo 308 309clean-libtool: 310 -rm -rf .libs _libs 311 312# This directory's subdirectories are mostly independent; you can cd 313# into them and run `make' without going through this Makefile. 314# To change the values of `make' variables: instead of editing Makefiles, 315# (1) if the variable is set in `config.status', edit `config.status' 316# (which will cause the Makefiles to be regenerated when you run `make'); 317# (2) otherwise, pass the desired values on the `make' command line. 318$(RECURSIVE_TARGETS): 319 @fail= failcom='exit 1'; \ 320 for f in x $$MAKEFLAGS; do \ 321 case $$f in \ 322 *=* | --[!k]*);; \ 323 *k*) failcom='fail=yes';; \ 324 esac; \ 325 done; \ 326 dot_seen=no; \ 327 target=`echo $@ | sed s/-recursive//`; \ 328 list='$(SUBDIRS)'; for subdir in $$list; do \ 329 echo "Making $$target in $$subdir"; \ 330 if test "$$subdir" = "."; then \ 331 dot_seen=yes; \ 332 local_target="$$target-am"; \ 333 else \ 334 local_target="$$target"; \ 335 fi; \ 336 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 337 || eval $$failcom; \ 338 done; \ 339 if test "$$dot_seen" = "no"; then \ 340 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 341 fi; test -z "$$fail" 342 343$(RECURSIVE_CLEAN_TARGETS): 344 @fail= failcom='exit 1'; \ 345 for f in x $$MAKEFLAGS; do \ 346 case $$f in \ 347 *=* | --[!k]*);; \ 348 *k*) failcom='fail=yes';; \ 349 esac; \ 350 done; \ 351 dot_seen=no; \ 352 case "$@" in \ 353 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 354 *) list='$(SUBDIRS)' ;; \ 355 esac; \ 356 rev=''; for subdir in $$list; do \ 357 if test "$$subdir" = "."; then :; else \ 358 rev="$$subdir $$rev"; \ 359 fi; \ 360 done; \ 361 rev="$$rev ."; \ 362 target=`echo $@ | sed s/-recursive//`; \ 363 for subdir in $$rev; do \ 364 echo "Making $$target in $$subdir"; \ 365 if test "$$subdir" = "."; then \ 366 local_target="$$target-am"; \ 367 else \ 368 local_target="$$target"; \ 369 fi; \ 370 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 371 || eval $$failcom; \ 372 done && test -z "$$fail" 373tags-recursive: 374 list='$(SUBDIRS)'; for subdir in $$list; do \ 375 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ 376 done 377ctags-recursive: 378 list='$(SUBDIRS)'; for subdir in $$list; do \ 379 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ 380 done 381 382ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) 383 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 384 unique=`for i in $$list; do \ 385 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 386 done | \ 387 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 388 END { if (nonempty) { for (i in files) print i; }; }'`; \ 389 mkid -fID $$unique 390tags: TAGS 391 392TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ 393 $(TAGS_FILES) $(LISP) 394 set x; \ 395 here=`pwd`; \ 396 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 397 include_option=--etags-include; \ 398 empty_fix=.; \ 399 else \ 400 include_option=--include; \ 401 empty_fix=; \ 402 fi; \ 403 list='$(SUBDIRS)'; for subdir in $$list; do \ 404 if test "$$subdir" = .; then :; else \ 405 test ! -f $$subdir/TAGS || \ 406 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 407 fi; \ 408 done; \ 409 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 410 unique=`for i in $$list; do \ 411 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 412 done | \ 413 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 414 END { if (nonempty) { for (i in files) print i; }; }'`; \ 415 shift; \ 416 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 417 test -n "$$unique" || unique=$$empty_fix; \ 418 if test $$# -gt 0; then \ 419 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 420 "$$@" $$unique; \ 421 else \ 422 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 423 $$unique; \ 424 fi; \ 425 fi 426ctags: CTAGS 427CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ 428 $(TAGS_FILES) $(LISP) 429 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 430 unique=`for i in $$list; do \ 431 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 432 done | \ 433 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 434 END { if (nonempty) { for (i in files) print i; }; }'`; \ 435 test -z "$(CTAGS_ARGS)$$unique" \ 436 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 437 $$unique 438 439GTAGS: 440 here=`$(am__cd) $(top_builddir) && pwd` \ 441 && $(am__cd) $(top_srcdir) \ 442 && gtags -i $(GTAGS_ARGS) "$$here" 443 444distclean-tags: 445 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 446 447distdir: $(DISTFILES) 448 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 449 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 450 list='$(DISTFILES)'; \ 451 dist_files=`for file in $$list; do echo $$file; done | \ 452 sed -e "s|^$$srcdirstrip/||;t" \ 453 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 454 case $$dist_files in \ 455 */*) $(MKDIR_P) `echo "$$dist_files" | \ 456 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 457 sort -u` ;; \ 458 esac; \ 459 for file in $$dist_files; do \ 460 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 461 if test -d $$d/$$file; then \ 462 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 463 if test -d "$(distdir)/$$file"; then \ 464 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 465 fi; \ 466 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 467 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 468 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 469 fi; \ 470 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 471 else \ 472 test -f "$(distdir)/$$file" \ 473 || cp -p $$d/$$file "$(distdir)/$$file" \ 474 || exit 1; \ 475 fi; \ 476 done 477 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 478 if test "$$subdir" = .; then :; else \ 479 test -d "$(distdir)/$$subdir" \ 480 || $(MKDIR_P) "$(distdir)/$$subdir" \ 481 || exit 1; \ 482 fi; \ 483 done 484 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 485 if test "$$subdir" = .; then :; else \ 486 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 487 $(am__relativize); \ 488 new_distdir=$$reldir; \ 489 dir1=$$subdir; dir2="$(top_distdir)"; \ 490 $(am__relativize); \ 491 new_top_distdir=$$reldir; \ 492 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 493 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 494 ($(am__cd) $$subdir && \ 495 $(MAKE) $(AM_MAKEFLAGS) \ 496 top_distdir="$$new_top_distdir" \ 497 distdir="$$new_distdir" \ 498 am__remove_distdir=: \ 499 am__skip_length_check=: \ 500 am__skip_mode_fix=: \ 501 distdir) \ 502 || exit 1; \ 503 fi; \ 504 done 505check-am: all-am 506check: check-recursive 507all-am: Makefile 508installdirs: installdirs-recursive 509installdirs-am: 510install: install-recursive 511install-exec: install-exec-recursive 512install-data: install-data-recursive 513uninstall: uninstall-recursive 514 515install-am: all-am 516 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 517 518installcheck: installcheck-recursive 519install-strip: 520 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 521 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 522 `test -z '$(STRIP)' || \ 523 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install 524mostlyclean-generic: 525 526clean-generic: 527 528distclean-generic: 529 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 530 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 531 532maintainer-clean-generic: 533 @echo "This command is intended for maintainers to use" 534 @echo "it deletes files that may require special tools to rebuild." 535clean: clean-recursive 536 537clean-am: clean-generic clean-libtool mostlyclean-am 538 539distclean: distclean-recursive 540 -rm -f Makefile 541distclean-am: clean-am distclean-generic distclean-tags 542 543dvi: dvi-recursive 544 545dvi-am: 546 547html: html-recursive 548 549html-am: 550 551info: info-recursive 552 553info-am: 554 555install-data-am: 556 557install-dvi: install-dvi-recursive 558 559install-dvi-am: 560 561install-exec-am: 562 563install-html: install-html-recursive 564 565install-html-am: 566 567install-info: install-info-recursive 568 569install-info-am: 570 571install-man: 572 573install-pdf: install-pdf-recursive 574 575install-pdf-am: 576 577install-ps: install-ps-recursive 578 579install-ps-am: 580 581installcheck-am: 582 583maintainer-clean: maintainer-clean-recursive 584 -rm -f Makefile 585maintainer-clean-am: distclean-am maintainer-clean-generic 586 587mostlyclean: mostlyclean-recursive 588 589mostlyclean-am: mostlyclean-generic mostlyclean-libtool 590 591pdf: pdf-recursive 592 593pdf-am: 594 595ps: ps-recursive 596 597ps-am: 598 599uninstall-am: 600 601.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ 602 install-am install-strip tags-recursive 603 604.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ 605 all all-am check check-am clean clean-generic clean-libtool \ 606 ctags ctags-recursive distclean distclean-generic \ 607 distclean-libtool distclean-tags distdir dvi dvi-am html \ 608 html-am info info-am install install-am install-data \ 609 install-data-am install-dvi install-dvi-am install-exec \ 610 install-exec-am install-html install-html-am install-info \ 611 install-info-am install-man install-pdf install-pdf-am \ 612 install-ps install-ps-am install-strip installcheck \ 613 installcheck-am installdirs installdirs-am maintainer-clean \ 614 maintainer-clean-generic mostlyclean mostlyclean-generic \ 615 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ 616 uninstall uninstall-am 617 618 619# Tell versions [3.59,3.63) of GNU make to not export all variables. 620# Otherwise a system limit (for SysV at least) may be exceeded. 621.NOEXPORT: 622