1# Makefile.in generated by automake 1.16.5 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2021 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17#
18#  Copyright © 2003 Keith Packard, Noah Levitt
19#
20#  Permission to use, copy, modify, distribute, and sell this software and its
21#  documentation for any purpose is hereby granted without fee, provided that
22#  the above copyright notice appear in all copies and that both that
23#  copyright notice and this permission notice appear in supporting
24#  documentation, and that the name of Keith Packard not be used in
25#  advertising or publicity pertaining to distribution of the software without
26#  specific, written prior permission.  Keith Packard makes no
27#  representations about the suitability of this software for any purpose.  It
28#  is provided "as is" without express or implied warranty.
29#
30#  KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
31#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
32#  EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR
33#  CONSEQUENTIAL COMPOSITES OR ANY COMPOSITES WHATSOEVER RESULTING FROM LOSS OF USE,
34#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
35#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
36#  PERFORMANCE OF THIS SOFTWARE.
37
38VPATH = @srcdir@
39am__is_gnu_make = { \
40  if test -z '$(MAKELEVEL)'; then \
41    false; \
42  elif test -n '$(MAKE_HOST)'; then \
43    true; \
44  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
45    true; \
46  else \
47    false; \
48  fi; \
49}
50am__make_running_with_option = \
51  case $${target_option-} in \
52      ?) ;; \
53      *) echo "am__make_running_with_option: internal error: invalid" \
54              "target option '$${target_option-}' specified" >&2; \
55         exit 1;; \
56  esac; \
57  has_opt=no; \
58  sane_makeflags=$$MAKEFLAGS; \
59  if $(am__is_gnu_make); then \
60    sane_makeflags=$$MFLAGS; \
61  else \
62    case $$MAKEFLAGS in \
63      *\\[\ \	]*) \
64        bs=\\; \
65        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
66          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
67    esac; \
68  fi; \
69  skip_next=no; \
70  strip_trailopt () \
71  { \
72    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
73  }; \
74  for flg in $$sane_makeflags; do \
75    test $$skip_next = yes && { skip_next=no; continue; }; \
76    case $$flg in \
77      *=*|--*) continue;; \
78        -*I) strip_trailopt 'I'; skip_next=yes;; \
79      -*I?*) strip_trailopt 'I';; \
80        -*O) strip_trailopt 'O'; skip_next=yes;; \
81      -*O?*) strip_trailopt 'O';; \
82        -*l) strip_trailopt 'l'; skip_next=yes;; \
83      -*l?*) strip_trailopt 'l';; \
84      -[dEDm]) skip_next=yes;; \
85      -[JT]) skip_next=yes;; \
86    esac; \
87    case $$flg in \
88      *$$target_option*) has_opt=yes; break;; \
89    esac; \
90  done; \
91  test $$has_opt = yes
92am__make_dryrun = (target_option=n; $(am__make_running_with_option))
93am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
94pkgdatadir = $(datadir)/@PACKAGE@
95pkgincludedir = $(includedir)/@PACKAGE@
96pkglibdir = $(libdir)/@PACKAGE@
97pkglibexecdir = $(libexecdir)/@PACKAGE@
98am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
99install_sh_DATA = $(install_sh) -c -m 644
100install_sh_PROGRAM = $(install_sh) -c
101install_sh_SCRIPT = $(install_sh) -c
102INSTALL_HEADER = $(INSTALL_DATA)
103transform = $(program_transform_name)
104NORMAL_INSTALL = :
105PRE_INSTALL = :
106POST_INSTALL = :
107NORMAL_UNINSTALL = :
108PRE_UNINSTALL = :
109POST_UNINSTALL = :
110build_triplet = @build@
111host_triplet = @host@
112subdir = .
113ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
114am__aclocal_m4_deps = $(top_srcdir)/configure.ac
115am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
116	$(ACLOCAL_M4)
117DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
118	$(am__configure_deps) $(am__DIST_COMMON)
119am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
120 configure.lineno config.status.lineno
121mkinstalldirs = $(install_sh) -d
122CONFIG_HEADER = config.h
123CONFIG_CLEAN_FILES = xcomposite.pc
124CONFIG_CLEAN_VPATH_FILES =
125AM_V_P = $(am__v_P_@AM_V@)
126am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
127am__v_P_0 = false
128am__v_P_1 = :
129AM_V_GEN = $(am__v_GEN_@AM_V@)
130am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
131am__v_GEN_0 = @echo "  GEN     " $@;
132am__v_GEN_1 = 
133AM_V_at = $(am__v_at_@AM_V@)
134am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
135am__v_at_0 = @
136am__v_at_1 = 
137SOURCES =
138DIST_SOURCES =
139RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
140	ctags-recursive dvi-recursive html-recursive info-recursive \
141	install-data-recursive install-dvi-recursive \
142	install-exec-recursive install-html-recursive \
143	install-info-recursive install-pdf-recursive \
144	install-ps-recursive install-recursive installcheck-recursive \
145	installdirs-recursive pdf-recursive ps-recursive \
146	tags-recursive uninstall-recursive
147am__can_run_installinfo = \
148  case $$AM_UPDATE_INFO_DIR in \
149    n|no|NO) false;; \
150    *) (install-info --version) >/dev/null 2>&1;; \
151  esac
152am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
153am__vpath_adj = case $$p in \
154    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
155    *) f=$$p;; \
156  esac;
157am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
158am__install_max = 40
159am__nobase_strip_setup = \
160  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
161am__nobase_strip = \
162  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
163am__nobase_list = $(am__nobase_strip_setup); \
164  for p in $$list; do echo "$$p $$p"; done | \
165  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
166  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
167    if (++n[$$2] == $(am__install_max)) \
168      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
169    END { for (dir in files) print dir, files[dir] }'
170am__base_list = \
171  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
172  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
173am__uninstall_files_from_dir = { \
174  test -z "$$files" \
175    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
176    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
177         $(am__cd) "$$dir" && rm -f $$files; }; \
178  }
179am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
180DATA = $(pkgconfig_DATA)
181RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
182  distclean-recursive maintainer-clean-recursive
183am__recursive_targets = \
184  $(RECURSIVE_TARGETS) \
185  $(RECURSIVE_CLEAN_TARGETS) \
186  $(am__extra_recursive_targets)
187AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
188	cscope distdir distdir-am dist dist-all distcheck
189am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
190	config.h.in
191# Read a list of newline-separated strings from the standard input,
192# and print each of them once, without duplicates.  Input order is
193# *not* preserved.
194am__uniquify_input = $(AWK) '\
195  BEGIN { nonempty = 0; } \
196  { items[$$0] = 1; nonempty = 1; } \
197  END { if (nonempty) { for (i in items) print i; }; } \
198'
199# Make sure the list of sources is unique.  This is necessary because,
200# e.g., the same source file might be shared among _SOURCES variables
201# for different programs/libraries.
202am__define_uniq_tagged_files = \
203  list='$(am__tagged_files)'; \
204  unique=`for i in $$list; do \
205    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
206  done | $(am__uniquify_input)`
207DIST_SUBDIRS = $(SUBDIRS)
208am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
209	$(srcdir)/xcomposite.pc.in AUTHORS COPYING ChangeLog INSTALL \
210	README.md compile config.guess config.sub install-sh ltmain.sh \
211	missing
212DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
213distdir = $(PACKAGE)-$(VERSION)
214top_distdir = $(distdir)
215am__remove_distdir = \
216  if test -d "$(distdir)"; then \
217    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
218      && rm -rf "$(distdir)" \
219      || { sleep 5 && rm -rf "$(distdir)"; }; \
220  else :; fi
221am__post_remove_distdir = $(am__remove_distdir)
222am__relativize = \
223  dir0=`pwd`; \
224  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
225  sed_rest='s,^[^/]*/*,,'; \
226  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
227  sed_butlast='s,/*[^/]*$$,,'; \
228  while test -n "$$dir1"; do \
229    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
230    if test "$$first" != "."; then \
231      if test "$$first" = ".."; then \
232        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
233        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
234      else \
235        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
236        if test "$$first2" = "$$first"; then \
237          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
238        else \
239          dir2="../$$dir2"; \
240        fi; \
241        dir0="$$dir0"/"$$first"; \
242      fi; \
243    fi; \
244    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
245  done; \
246  reldir="$$dir2"
247DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
248GZIP_ENV = --best
249DIST_TARGETS = dist-xz dist-gzip
250# Exists only to be overridden by the user if desired.
251AM_DISTCHECK_DVI_TARGET = dvi
252distuninstallcheck_listfiles = find . -type f -print
253am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
254  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
255distcleancheck_listfiles = find . -type f -print
256ACLOCAL = @ACLOCAL@
257ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
258ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
259AMTAR = @AMTAR@
260AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
261APP_MAN_DIR = @APP_MAN_DIR@
262APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
263AR = @AR@
264AUTOCONF = @AUTOCONF@
265AUTOHEADER = @AUTOHEADER@
266AUTOMAKE = @AUTOMAKE@
267AWK = @AWK@
268BASE_CFLAGS = @BASE_CFLAGS@
269CC = @CC@
270CCDEPMODE = @CCDEPMODE@
271CFLAGS = @CFLAGS@
272CHANGELOG_CMD = @CHANGELOG_CMD@
273COMPOSITEEXT_VERSION = @COMPOSITEEXT_VERSION@
274CPPFLAGS = @CPPFLAGS@
275CSCOPE = @CSCOPE@
276CTAGS = @CTAGS@
277CWARNFLAGS = @CWARNFLAGS@
278CYGPATH_W = @CYGPATH_W@
279DEFS = @DEFS@
280DEPDIR = @DEPDIR@
281DLLTOOL = @DLLTOOL@
282DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
283DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
284DSYMUTIL = @DSYMUTIL@
285DUMPBIN = @DUMPBIN@
286ECHO_C = @ECHO_C@
287ECHO_N = @ECHO_N@
288ECHO_T = @ECHO_T@
289EGREP = @EGREP@
290ETAGS = @ETAGS@
291EXEEXT = @EXEEXT@
292FGREP = @FGREP@
293FILECMD = @FILECMD@
294FILE_MAN_DIR = @FILE_MAN_DIR@
295FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
296GREP = @GREP@
297INSTALL = @INSTALL@
298INSTALL_CMD = @INSTALL_CMD@
299INSTALL_DATA = @INSTALL_DATA@
300INSTALL_PROGRAM = @INSTALL_PROGRAM@
301INSTALL_SCRIPT = @INSTALL_SCRIPT@
302INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
303LD = @LD@
304LDFLAGS = @LDFLAGS@
305LIBOBJS = @LIBOBJS@
306LIBS = @LIBS@
307LIBTOOL = @LIBTOOL@
308LIB_MAN_DIR = @LIB_MAN_DIR@
309LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
310LIPO = @LIPO@
311LN_S = @LN_S@
312LTLIBOBJS = @LTLIBOBJS@
313LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
314MAKEINFO = @MAKEINFO@
315MANIFEST_TOOL = @MANIFEST_TOOL@
316MAN_SUBSTS = @MAN_SUBSTS@
317MISC_MAN_DIR = @MISC_MAN_DIR@
318MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
319MKDIR_P = @MKDIR_P@
320NM = @NM@
321NMEDIT = @NMEDIT@
322OBJDUMP = @OBJDUMP@
323OBJEXT = @OBJEXT@
324OTOOL = @OTOOL@
325OTOOL64 = @OTOOL64@
326PACKAGE = @PACKAGE@
327PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
328PACKAGE_NAME = @PACKAGE_NAME@
329PACKAGE_STRING = @PACKAGE_STRING@
330PACKAGE_TARNAME = @PACKAGE_TARNAME@
331PACKAGE_URL = @PACKAGE_URL@
332PACKAGE_VERSION = @PACKAGE_VERSION@
333PATH_SEPARATOR = @PATH_SEPARATOR@
334PKG_CONFIG = @PKG_CONFIG@
335PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
336PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
337RANLIB = @RANLIB@
338SED = @SED@
339SET_MAKE = @SET_MAKE@
340SHELL = @SHELL@
341STRICT_CFLAGS = @STRICT_CFLAGS@
342STRIP = @STRIP@
343VERSION = @VERSION@
344XCOMPOSITE_CFLAGS = @XCOMPOSITE_CFLAGS@
345XCOMPOSITE_LIBS = @XCOMPOSITE_LIBS@
346XFIXES_CFLAGS = @XFIXES_CFLAGS@
347XFIXES_LIBS = @XFIXES_LIBS@
348XMLTO = @XMLTO@
349XORG_MAN_PAGE = @XORG_MAN_PAGE@
350abs_builddir = @abs_builddir@
351abs_srcdir = @abs_srcdir@
352abs_top_builddir = @abs_top_builddir@
353abs_top_srcdir = @abs_top_srcdir@
354ac_ct_AR = @ac_ct_AR@
355ac_ct_CC = @ac_ct_CC@
356ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
357am__include = @am__include@
358am__leading_dot = @am__leading_dot@
359am__quote = @am__quote@
360am__tar = @am__tar@
361am__untar = @am__untar@
362bindir = @bindir@
363build = @build@
364build_alias = @build_alias@
365build_cpu = @build_cpu@
366build_os = @build_os@
367build_vendor = @build_vendor@
368builddir = @builddir@
369datadir = @datadir@
370datarootdir = @datarootdir@
371docdir = @docdir@
372dvidir = @dvidir@
373exec_prefix = @exec_prefix@
374host = @host@
375host_alias = @host_alias@
376host_cpu = @host_cpu@
377host_os = @host_os@
378host_vendor = @host_vendor@
379htmldir = @htmldir@
380includedir = @includedir@
381infodir = @infodir@
382install_sh = @install_sh@
383libdir = @libdir@
384libexecdir = @libexecdir@
385localedir = @localedir@
386localstatedir = @localstatedir@
387mandir = @mandir@
388mkdir_p = @mkdir_p@
389oldincludedir = @oldincludedir@
390pdfdir = @pdfdir@
391prefix = @prefix@
392program_transform_name = @program_transform_name@
393psdir = @psdir@
394runstatedir = @runstatedir@
395sbindir = @sbindir@
396sharedstatedir = @sharedstatedir@
397srcdir = @srcdir@
398sysconfdir = @sysconfdir@
399target_alias = @target_alias@
400top_build_prefix = @top_build_prefix@
401top_builddir = @top_builddir@
402top_srcdir = @top_srcdir@
403SUBDIRS = src man
404pkgconfigdir = $(libdir)/pkgconfig
405pkgconfig_DATA = xcomposite.pc
406MAINTAINERCLEANFILES = ChangeLog INSTALL
407EXTRA_DIST = README.md
408all: config.h
409	$(MAKE) $(AM_MAKEFLAGS) all-recursive
410
411.SUFFIXES:
412am--refresh: Makefile
413	@:
414$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
415	@for dep in $?; do \
416	  case '$(am__configure_deps)' in \
417	    *$$dep*) \
418	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
419	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
420		&& exit 0; \
421	      exit 1;; \
422	  esac; \
423	done; \
424	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
425	$(am__cd) $(top_srcdir) && \
426	  $(AUTOMAKE) --foreign Makefile
427Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
428	@case '$?' in \
429	  *config.status*) \
430	    echo ' $(SHELL) ./config.status'; \
431	    $(SHELL) ./config.status;; \
432	  *) \
433	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
434	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
435	esac;
436
437$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
438	$(SHELL) ./config.status --recheck
439
440$(top_srcdir)/configure:  $(am__configure_deps)
441	$(am__cd) $(srcdir) && $(AUTOCONF)
442$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
443	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
444$(am__aclocal_m4_deps):
445
446config.h: stamp-h1
447	@test -f $@ || rm -f stamp-h1
448	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
449
450stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
451	@rm -f stamp-h1
452	cd $(top_builddir) && $(SHELL) ./config.status config.h
453$(srcdir)/config.h.in:  $(am__configure_deps) 
454	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
455	rm -f stamp-h1
456	touch $@
457
458distclean-hdr:
459	-rm -f config.h stamp-h1
460xcomposite.pc: $(top_builddir)/config.status $(srcdir)/xcomposite.pc.in
461	cd $(top_builddir) && $(SHELL) ./config.status $@
462
463mostlyclean-libtool:
464	-rm -f *.lo
465
466clean-libtool:
467	-rm -rf .libs _libs
468
469distclean-libtool:
470	-rm -f libtool config.lt
471install-pkgconfigDATA: $(pkgconfig_DATA)
472	@$(NORMAL_INSTALL)
473	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
474	if test -n "$$list"; then \
475	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
476	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
477	fi; \
478	for p in $$list; do \
479	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
480	  echo "$$d$$p"; \
481	done | $(am__base_list) | \
482	while read files; do \
483	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
484	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
485	done
486
487uninstall-pkgconfigDATA:
488	@$(NORMAL_UNINSTALL)
489	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
490	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
491	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
492
493# This directory's subdirectories are mostly independent; you can cd
494# into them and run 'make' without going through this Makefile.
495# To change the values of 'make' variables: instead of editing Makefiles,
496# (1) if the variable is set in 'config.status', edit 'config.status'
497#     (which will cause the Makefiles to be regenerated when you run 'make');
498# (2) otherwise, pass the desired values on the 'make' command line.
499$(am__recursive_targets):
500	@fail=; \
501	if $(am__make_keepgoing); then \
502	  failcom='fail=yes'; \
503	else \
504	  failcom='exit 1'; \
505	fi; \
506	dot_seen=no; \
507	target=`echo $@ | sed s/-recursive//`; \
508	case "$@" in \
509	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
510	  *) list='$(SUBDIRS)' ;; \
511	esac; \
512	for subdir in $$list; do \
513	  echo "Making $$target in $$subdir"; \
514	  if test "$$subdir" = "."; then \
515	    dot_seen=yes; \
516	    local_target="$$target-am"; \
517	  else \
518	    local_target="$$target"; \
519	  fi; \
520	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
521	  || eval $$failcom; \
522	done; \
523	if test "$$dot_seen" = "no"; then \
524	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
525	fi; test -z "$$fail"
526
527ID: $(am__tagged_files)
528	$(am__define_uniq_tagged_files); mkid -fID $$unique
529tags: tags-recursive
530TAGS: tags
531
532tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
533	set x; \
534	here=`pwd`; \
535	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
536	  include_option=--etags-include; \
537	  empty_fix=.; \
538	else \
539	  include_option=--include; \
540	  empty_fix=; \
541	fi; \
542	list='$(SUBDIRS)'; for subdir in $$list; do \
543	  if test "$$subdir" = .; then :; else \
544	    test ! -f $$subdir/TAGS || \
545	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
546	  fi; \
547	done; \
548	$(am__define_uniq_tagged_files); \
549	shift; \
550	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
551	  test -n "$$unique" || unique=$$empty_fix; \
552	  if test $$# -gt 0; then \
553	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
554	      "$$@" $$unique; \
555	  else \
556	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
557	      $$unique; \
558	  fi; \
559	fi
560ctags: ctags-recursive
561
562CTAGS: ctags
563ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
564	$(am__define_uniq_tagged_files); \
565	test -z "$(CTAGS_ARGS)$$unique" \
566	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
567	     $$unique
568
569GTAGS:
570	here=`$(am__cd) $(top_builddir) && pwd` \
571	  && $(am__cd) $(top_srcdir) \
572	  && gtags -i $(GTAGS_ARGS) "$$here"
573cscope: cscope.files
574	test ! -s cscope.files \
575	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
576clean-cscope:
577	-rm -f cscope.files
578cscope.files: clean-cscope cscopelist
579cscopelist: cscopelist-recursive
580
581cscopelist-am: $(am__tagged_files)
582	list='$(am__tagged_files)'; \
583	case "$(srcdir)" in \
584	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
585	  *) sdir=$(subdir)/$(srcdir) ;; \
586	esac; \
587	for i in $$list; do \
588	  if test -f "$$i"; then \
589	    echo "$(subdir)/$$i"; \
590	  else \
591	    echo "$$sdir/$$i"; \
592	  fi; \
593	done >> $(top_builddir)/cscope.files
594
595distclean-tags:
596	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
597	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
598distdir: $(BUILT_SOURCES)
599	$(MAKE) $(AM_MAKEFLAGS) distdir-am
600
601distdir-am: $(DISTFILES)
602	$(am__remove_distdir)
603	test -d "$(distdir)" || mkdir "$(distdir)"
604	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
605	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
606	list='$(DISTFILES)'; \
607	  dist_files=`for file in $$list; do echo $$file; done | \
608	  sed -e "s|^$$srcdirstrip/||;t" \
609	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
610	case $$dist_files in \
611	  */*) $(MKDIR_P) `echo "$$dist_files" | \
612			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
613			   sort -u` ;; \
614	esac; \
615	for file in $$dist_files; do \
616	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
617	  if test -d $$d/$$file; then \
618	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
619	    if test -d "$(distdir)/$$file"; then \
620	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
621	    fi; \
622	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
623	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
624	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
625	    fi; \
626	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
627	  else \
628	    test -f "$(distdir)/$$file" \
629	    || cp -p $$d/$$file "$(distdir)/$$file" \
630	    || exit 1; \
631	  fi; \
632	done
633	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
634	  if test "$$subdir" = .; then :; else \
635	    $(am__make_dryrun) \
636	      || test -d "$(distdir)/$$subdir" \
637	      || $(MKDIR_P) "$(distdir)/$$subdir" \
638	      || exit 1; \
639	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
640	    $(am__relativize); \
641	    new_distdir=$$reldir; \
642	    dir1=$$subdir; dir2="$(top_distdir)"; \
643	    $(am__relativize); \
644	    new_top_distdir=$$reldir; \
645	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
646	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
647	    ($(am__cd) $$subdir && \
648	      $(MAKE) $(AM_MAKEFLAGS) \
649	        top_distdir="$$new_top_distdir" \
650	        distdir="$$new_distdir" \
651		am__remove_distdir=: \
652		am__skip_length_check=: \
653		am__skip_mode_fix=: \
654	        distdir) \
655	      || exit 1; \
656	  fi; \
657	done
658	$(MAKE) $(AM_MAKEFLAGS) \
659	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
660	  dist-hook
661	-test -n "$(am__skip_mode_fix)" \
662	|| find "$(distdir)" -type d ! -perm -755 \
663		-exec chmod u+rwx,go+rx {} \; -o \
664	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
665	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
666	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
667	|| chmod -R a+r "$(distdir)"
668dist-gzip: distdir
669	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
670	$(am__post_remove_distdir)
671
672dist-bzip2: distdir
673	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
674	$(am__post_remove_distdir)
675
676dist-lzip: distdir
677	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
678	$(am__post_remove_distdir)
679dist-xz: distdir
680	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
681	$(am__post_remove_distdir)
682
683dist-zstd: distdir
684	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
685	$(am__post_remove_distdir)
686
687dist-tarZ: distdir
688	@echo WARNING: "Support for distribution archives compressed with" \
689		       "legacy program 'compress' is deprecated." >&2
690	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
691	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
692	$(am__post_remove_distdir)
693
694dist-shar: distdir
695	@echo WARNING: "Support for shar distribution archives is" \
696	               "deprecated." >&2
697	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
698	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
699	$(am__post_remove_distdir)
700
701dist-zip: distdir
702	-rm -f $(distdir).zip
703	zip -rq $(distdir).zip $(distdir)
704	$(am__post_remove_distdir)
705
706dist dist-all:
707	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
708	$(am__post_remove_distdir)
709
710# This target untars the dist file and tries a VPATH configuration.  Then
711# it guarantees that the distribution is self-contained by making another
712# tarfile.
713distcheck: dist
714	case '$(DIST_ARCHIVES)' in \
715	*.tar.gz*) \
716	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
717	*.tar.bz2*) \
718	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
719	*.tar.lz*) \
720	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
721	*.tar.xz*) \
722	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
723	*.tar.Z*) \
724	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
725	*.shar.gz*) \
726	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
727	*.zip*) \
728	  unzip $(distdir).zip ;;\
729	*.tar.zst*) \
730	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
731	esac
732	chmod -R a-w $(distdir)
733	chmod u+w $(distdir)
734	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
735	chmod a-w $(distdir)
736	test -d $(distdir)/_build || exit 0; \
737	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
738	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
739	  && am__cwd=`pwd` \
740	  && $(am__cd) $(distdir)/_build/sub \
741	  && ../../configure \
742	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
743	    $(DISTCHECK_CONFIGURE_FLAGS) \
744	    --srcdir=../.. --prefix="$$dc_install_base" \
745	  && $(MAKE) $(AM_MAKEFLAGS) \
746	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
747	  && $(MAKE) $(AM_MAKEFLAGS) check \
748	  && $(MAKE) $(AM_MAKEFLAGS) install \
749	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
750	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
751	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
752	        distuninstallcheck \
753	  && chmod -R a-w "$$dc_install_base" \
754	  && ({ \
755	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
756	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
757	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
758	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
759	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
760	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
761	  && rm -rf "$$dc_destdir" \
762	  && $(MAKE) $(AM_MAKEFLAGS) dist \
763	  && rm -rf $(DIST_ARCHIVES) \
764	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
765	  && cd "$$am__cwd" \
766	  || exit 1
767	$(am__post_remove_distdir)
768	@(echo "$(distdir) archives ready for distribution: "; \
769	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
770	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
771distuninstallcheck:
772	@test -n '$(distuninstallcheck_dir)' || { \
773	  echo 'ERROR: trying to run $@ with an empty' \
774	       '$$(distuninstallcheck_dir)' >&2; \
775	  exit 1; \
776	}; \
777	$(am__cd) '$(distuninstallcheck_dir)' || { \
778	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
779	  exit 1; \
780	}; \
781	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
782	   || { echo "ERROR: files left after uninstall:" ; \
783	        if test -n "$(DESTDIR)"; then \
784	          echo "  (check DESTDIR support)"; \
785	        fi ; \
786	        $(distuninstallcheck_listfiles) ; \
787	        exit 1; } >&2
788distcleancheck: distclean
789	@if test '$(srcdir)' = . ; then \
790	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
791	  exit 1 ; \
792	fi
793	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
794	  || { echo "ERROR: files left in build directory after distclean:" ; \
795	       $(distcleancheck_listfiles) ; \
796	       exit 1; } >&2
797check-am: all-am
798check: check-recursive
799all-am: Makefile $(DATA) config.h
800installdirs: installdirs-recursive
801installdirs-am:
802	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
803	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
804	done
805install: install-recursive
806install-exec: install-exec-recursive
807install-data: install-data-recursive
808uninstall: uninstall-recursive
809
810install-am: all-am
811	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
812
813installcheck: installcheck-recursive
814install-strip:
815	if test -z '$(STRIP)'; then \
816	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
817	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
818	      install; \
819	else \
820	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
821	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
822	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
823	fi
824mostlyclean-generic:
825
826clean-generic:
827
828distclean-generic:
829	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
830	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
831
832maintainer-clean-generic:
833	@echo "This command is intended for maintainers to use"
834	@echo "it deletes files that may require special tools to rebuild."
835	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
836clean: clean-recursive
837
838clean-am: clean-generic clean-libtool mostlyclean-am
839
840distclean: distclean-recursive
841	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
842	-rm -f Makefile
843distclean-am: clean-am distclean-generic distclean-hdr \
844	distclean-libtool distclean-tags
845
846dvi: dvi-recursive
847
848dvi-am:
849
850html: html-recursive
851
852html-am:
853
854info: info-recursive
855
856info-am:
857
858install-data-am: install-pkgconfigDATA
859
860install-dvi: install-dvi-recursive
861
862install-dvi-am:
863
864install-exec-am:
865
866install-html: install-html-recursive
867
868install-html-am:
869
870install-info: install-info-recursive
871
872install-info-am:
873
874install-man:
875
876install-pdf: install-pdf-recursive
877
878install-pdf-am:
879
880install-ps: install-ps-recursive
881
882install-ps-am:
883
884installcheck-am:
885
886maintainer-clean: maintainer-clean-recursive
887	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
888	-rm -rf $(top_srcdir)/autom4te.cache
889	-rm -f Makefile
890maintainer-clean-am: distclean-am maintainer-clean-generic
891
892mostlyclean: mostlyclean-recursive
893
894mostlyclean-am: mostlyclean-generic mostlyclean-libtool
895
896pdf: pdf-recursive
897
898pdf-am:
899
900ps: ps-recursive
901
902ps-am:
903
904uninstall-am: uninstall-pkgconfigDATA
905
906.MAKE: $(am__recursive_targets) all install-am install-strip
907
908.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
909	am--refresh check check-am clean clean-cscope clean-generic \
910	clean-libtool cscope cscopelist-am ctags ctags-am dist \
911	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
912	dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \
913	distclean-generic distclean-hdr distclean-libtool \
914	distclean-tags distcleancheck distdir distuninstallcheck dvi \
915	dvi-am html html-am info info-am install install-am \
916	install-data install-data-am install-dvi install-dvi-am \
917	install-exec install-exec-am install-html install-html-am \
918	install-info install-info-am install-man install-pdf \
919	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
920	install-strip installcheck installcheck-am installdirs \
921	installdirs-am maintainer-clean maintainer-clean-generic \
922	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
923	ps ps-am tags tags-am uninstall uninstall-am \
924	uninstall-pkgconfigDATA
925
926.PRECIOUS: Makefile
927
928
929.PHONY: ChangeLog INSTALL
930
931INSTALL:
932	$(INSTALL_CMD)
933
934ChangeLog:
935	$(CHANGELOG_CMD)
936
937dist-hook: ChangeLog INSTALL
938
939# Tell versions [3.59,3.63) of GNU make to not export all variables.
940# Otherwise a system limit (for SysV at least) may be exceeded.
941.NOEXPORT:
942