Makefile.in revision 84bf8334
1# Makefile.in generated by automake 1.14.1 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2013 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# Copyright 2005 Adam Jackson. 18# 19# Permission is hereby granted, free of charge, to any person obtaining a 20# copy of this software and associated documentation files (the "Software"), 21# to deal in the Software without restriction, including without limitation 22# on the rights to use, copy, modify, merge, publish, distribute, sub 23# license, and/or sell copies of the Software, and to permit persons to whom 24# the Software is furnished to do so, subject to the following conditions: 25# 26# The above copyright notice and this permission notice (including the next 27# paragraph) shall be included in all copies or substantial portions of the 28# Software. 29# 30# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 31# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 32# FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL 33# ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER 34# IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 35# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 36 37VPATH = @srcdir@ 38am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' 39am__make_running_with_option = \ 40 case $${target_option-} in \ 41 ?) ;; \ 42 *) echo "am__make_running_with_option: internal error: invalid" \ 43 "target option '$${target_option-}' specified" >&2; \ 44 exit 1;; \ 45 esac; \ 46 has_opt=no; \ 47 sane_makeflags=$$MAKEFLAGS; \ 48 if $(am__is_gnu_make); then \ 49 sane_makeflags=$$MFLAGS; \ 50 else \ 51 case $$MAKEFLAGS in \ 52 *\\[\ \ ]*) \ 53 bs=\\; \ 54 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 55 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 56 esac; \ 57 fi; \ 58 skip_next=no; \ 59 strip_trailopt () \ 60 { \ 61 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 62 }; \ 63 for flg in $$sane_makeflags; do \ 64 test $$skip_next = yes && { skip_next=no; continue; }; \ 65 case $$flg in \ 66 *=*|--*) continue;; \ 67 -*I) strip_trailopt 'I'; skip_next=yes;; \ 68 -*I?*) strip_trailopt 'I';; \ 69 -*O) strip_trailopt 'O'; skip_next=yes;; \ 70 -*O?*) strip_trailopt 'O';; \ 71 -*l) strip_trailopt 'l'; skip_next=yes;; \ 72 -*l?*) strip_trailopt 'l';; \ 73 -[dEDm]) skip_next=yes;; \ 74 -[JT]) skip_next=yes;; \ 75 esac; \ 76 case $$flg in \ 77 *$$target_option*) has_opt=yes; break;; \ 78 esac; \ 79 done; \ 80 test $$has_opt = yes 81am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 82am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 83pkgdatadir = $(datadir)/@PACKAGE@ 84pkgincludedir = $(includedir)/@PACKAGE@ 85pkglibdir = $(libdir)/@PACKAGE@ 86pkglibexecdir = $(libexecdir)/@PACKAGE@ 87am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 88install_sh_DATA = $(install_sh) -c -m 644 89install_sh_PROGRAM = $(install_sh) -c 90install_sh_SCRIPT = $(install_sh) -c 91INSTALL_HEADER = $(INSTALL_DATA) 92transform = $(program_transform_name) 93NORMAL_INSTALL = : 94PRE_INSTALL = : 95POST_INSTALL = : 96NORMAL_UNINSTALL = : 97PRE_UNINSTALL = : 98POST_UNINSTALL = : 99build_triplet = @build@ 100host_triplet = @host@ 101subdir = . 102DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ 103 $(top_srcdir)/configure $(am__configure_deps) \ 104 $(srcdir)/config.h.in $(srcdir)/xorg-mouse.pc.in COPYING \ 105 ChangeLog INSTALL README compile config.guess config.sub \ 106 install-sh missing ltmain.sh 107ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 108am__aclocal_m4_deps = $(top_srcdir)/configure.ac 109am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 110 $(ACLOCAL_M4) 111am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 112 configure.lineno config.status.lineno 113mkinstalldirs = $(install_sh) -d 114CONFIG_HEADER = config.h 115CONFIG_CLEAN_FILES = xorg-mouse.pc 116CONFIG_CLEAN_VPATH_FILES = 117AM_V_P = $(am__v_P_@AM_V@) 118am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 119am__v_P_0 = false 120am__v_P_1 = : 121AM_V_GEN = $(am__v_GEN_@AM_V@) 122am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 123am__v_GEN_0 = @echo " GEN " $@; 124am__v_GEN_1 = 125AM_V_at = $(am__v_at_@AM_V@) 126am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 127am__v_at_0 = @ 128am__v_at_1 = 129SOURCES = 130DIST_SOURCES = 131RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 132 ctags-recursive dvi-recursive html-recursive info-recursive \ 133 install-data-recursive install-dvi-recursive \ 134 install-exec-recursive install-html-recursive \ 135 install-info-recursive install-pdf-recursive \ 136 install-ps-recursive install-recursive installcheck-recursive \ 137 installdirs-recursive pdf-recursive ps-recursive \ 138 tags-recursive uninstall-recursive 139am__can_run_installinfo = \ 140 case $$AM_UPDATE_INFO_DIR in \ 141 n|no|NO) false;; \ 142 *) (install-info --version) >/dev/null 2>&1;; \ 143 esac 144am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; 145am__vpath_adj = case $$p in \ 146 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ 147 *) f=$$p;; \ 148 esac; 149am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; 150am__install_max = 40 151am__nobase_strip_setup = \ 152 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` 153am__nobase_strip = \ 154 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" 155am__nobase_list = $(am__nobase_strip_setup); \ 156 for p in $$list; do echo "$$p $$p"; done | \ 157 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ 158 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ 159 if (++n[$$2] == $(am__install_max)) \ 160 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ 161 END { for (dir in files) print dir, files[dir] }' 162am__base_list = \ 163 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ 164 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' 165am__uninstall_files_from_dir = { \ 166 test -z "$$files" \ 167 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ 168 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ 169 $(am__cd) "$$dir" && rm -f $$files; }; \ 170 } 171am__installdirs = "$(DESTDIR)$(pkgconfigdir)" 172DATA = $(pkgconfig_DATA) 173RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 174 distclean-recursive maintainer-clean-recursive 175am__recursive_targets = \ 176 $(RECURSIVE_TARGETS) \ 177 $(RECURSIVE_CLEAN_TARGETS) \ 178 $(am__extra_recursive_targets) 179AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 180 cscope distdir dist dist-all distcheck 181am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ 182 $(LISP)config.h.in 183# Read a list of newline-separated strings from the standard input, 184# and print each of them once, without duplicates. Input order is 185# *not* preserved. 186am__uniquify_input = $(AWK) '\ 187 BEGIN { nonempty = 0; } \ 188 { items[$$0] = 1; nonempty = 1; } \ 189 END { if (nonempty) { for (i in items) print i; }; } \ 190' 191# Make sure the list of sources is unique. This is necessary because, 192# e.g., the same source file might be shared among _SOURCES variables 193# for different programs/libraries. 194am__define_uniq_tagged_files = \ 195 list='$(am__tagged_files)'; \ 196 unique=`for i in $$list; do \ 197 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 198 done | $(am__uniquify_input)` 199ETAGS = etags 200CTAGS = ctags 201CSCOPE = cscope 202DIST_SUBDIRS = $(SUBDIRS) 203DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 204distdir = $(PACKAGE)-$(VERSION) 205top_distdir = $(distdir) 206am__remove_distdir = \ 207 if test -d "$(distdir)"; then \ 208 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 209 && rm -rf "$(distdir)" \ 210 || { sleep 5 && rm -rf "$(distdir)"; }; \ 211 else :; fi 212am__post_remove_distdir = $(am__remove_distdir) 213am__relativize = \ 214 dir0=`pwd`; \ 215 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 216 sed_rest='s,^[^/]*/*,,'; \ 217 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 218 sed_butlast='s,/*[^/]*$$,,'; \ 219 while test -n "$$dir1"; do \ 220 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 221 if test "$$first" != "."; then \ 222 if test "$$first" = ".."; then \ 223 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 224 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 225 else \ 226 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 227 if test "$$first2" = "$$first"; then \ 228 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 229 else \ 230 dir2="../$$dir2"; \ 231 fi; \ 232 dir0="$$dir0"/"$$first"; \ 233 fi; \ 234 fi; \ 235 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 236 done; \ 237 reldir="$$dir2" 238DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 239GZIP_ENV = --best 240DIST_TARGETS = dist-bzip2 dist-gzip 241distuninstallcheck_listfiles = find . -type f -print 242am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 243 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 244distcleancheck_listfiles = find . -type f -print 245ACLOCAL = @ACLOCAL@ 246ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ 247ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ 248AMTAR = @AMTAR@ 249AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 250APP_MAN_DIR = @APP_MAN_DIR@ 251APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ 252AR = @AR@ 253AUTOCONF = @AUTOCONF@ 254AUTOHEADER = @AUTOHEADER@ 255AUTOMAKE = @AUTOMAKE@ 256AWK = @AWK@ 257BASE_CFLAGS = @BASE_CFLAGS@ 258CC = @CC@ 259CCDEPMODE = @CCDEPMODE@ 260CFLAGS = @CFLAGS@ 261CHANGELOG_CMD = @CHANGELOG_CMD@ 262CPP = @CPP@ 263CPPFLAGS = @CPPFLAGS@ 264CWARNFLAGS = @CWARNFLAGS@ 265CYGPATH_W = @CYGPATH_W@ 266DEFS = @DEFS@ 267DEPDIR = @DEPDIR@ 268DLLTOOL = @DLLTOOL@ 269DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ 270DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ 271DRIVER_NAME = @DRIVER_NAME@ 272DSYMUTIL = @DSYMUTIL@ 273DUMPBIN = @DUMPBIN@ 274ECHO_C = @ECHO_C@ 275ECHO_N = @ECHO_N@ 276ECHO_T = @ECHO_T@ 277EGREP = @EGREP@ 278EXEEXT = @EXEEXT@ 279FGREP = @FGREP@ 280FILE_MAN_DIR = @FILE_MAN_DIR@ 281FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ 282GREP = @GREP@ 283INSTALL = @INSTALL@ 284INSTALL_CMD = @INSTALL_CMD@ 285INSTALL_DATA = @INSTALL_DATA@ 286INSTALL_PROGRAM = @INSTALL_PROGRAM@ 287INSTALL_SCRIPT = @INSTALL_SCRIPT@ 288INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 289LD = @LD@ 290LDFLAGS = @LDFLAGS@ 291LIBOBJS = @LIBOBJS@ 292LIBS = @LIBS@ 293LIBTOOL = @LIBTOOL@ 294LIB_MAN_DIR = @LIB_MAN_DIR@ 295LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ 296LINT = @LINT@ 297LINT_FLAGS = @LINT_FLAGS@ 298LIPO = @LIPO@ 299LN_S = @LN_S@ 300LTLIBOBJS = @LTLIBOBJS@ 301MAKEINFO = @MAKEINFO@ 302MANIFEST_TOOL = @MANIFEST_TOOL@ 303MAN_SUBSTS = @MAN_SUBSTS@ 304MISC_MAN_DIR = @MISC_MAN_DIR@ 305MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ 306MKDIR_P = @MKDIR_P@ 307NM = @NM@ 308NMEDIT = @NMEDIT@ 309OBJDUMP = @OBJDUMP@ 310OBJEXT = @OBJEXT@ 311OS_MOUSE_NAME = @OS_MOUSE_NAME@ 312OTOOL = @OTOOL@ 313OTOOL64 = @OTOOL64@ 314PACKAGE = @PACKAGE@ 315PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 316PACKAGE_NAME = @PACKAGE_NAME@ 317PACKAGE_STRING = @PACKAGE_STRING@ 318PACKAGE_TARNAME = @PACKAGE_TARNAME@ 319PACKAGE_URL = @PACKAGE_URL@ 320PACKAGE_VERSION = @PACKAGE_VERSION@ 321PATH_SEPARATOR = @PATH_SEPARATOR@ 322PKG_CONFIG = @PKG_CONFIG@ 323RANLIB = @RANLIB@ 324SED = @SED@ 325SET_MAKE = @SET_MAKE@ 326SHELL = @SHELL@ 327STRICT_CFLAGS = @STRICT_CFLAGS@ 328STRIP = @STRIP@ 329VERSION = @VERSION@ 330XORG_CFLAGS = @XORG_CFLAGS@ 331XORG_LIBS = @XORG_LIBS@ 332XORG_MAN_PAGE = @XORG_MAN_PAGE@ 333abs_builddir = @abs_builddir@ 334abs_srcdir = @abs_srcdir@ 335abs_top_builddir = @abs_top_builddir@ 336abs_top_srcdir = @abs_top_srcdir@ 337ac_ct_AR = @ac_ct_AR@ 338ac_ct_CC = @ac_ct_CC@ 339ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 340am__include = @am__include@ 341am__leading_dot = @am__leading_dot@ 342am__quote = @am__quote@ 343am__tar = @am__tar@ 344am__untar = @am__untar@ 345bindir = @bindir@ 346build = @build@ 347build_alias = @build_alias@ 348build_cpu = @build_cpu@ 349build_os = @build_os@ 350build_vendor = @build_vendor@ 351builddir = @builddir@ 352datadir = @datadir@ 353datarootdir = @datarootdir@ 354docdir = @docdir@ 355dvidir = @dvidir@ 356exec_prefix = @exec_prefix@ 357host = @host@ 358host_alias = @host_alias@ 359host_cpu = @host_cpu@ 360host_os = @host_os@ 361host_vendor = @host_vendor@ 362htmldir = @htmldir@ 363includedir = @includedir@ 364infodir = @infodir@ 365inputdir = @inputdir@ 366install_sh = @install_sh@ 367libdir = @libdir@ 368libexecdir = @libexecdir@ 369localedir = @localedir@ 370localstatedir = @localstatedir@ 371mandir = @mandir@ 372mkdir_p = @mkdir_p@ 373oldincludedir = @oldincludedir@ 374pdfdir = @pdfdir@ 375prefix = @prefix@ 376program_transform_name = @program_transform_name@ 377psdir = @psdir@ 378sbindir = @sbindir@ 379sdkdir = @sdkdir@ 380sharedstatedir = @sharedstatedir@ 381srcdir = @srcdir@ 382sysconfdir = @sysconfdir@ 383target_alias = @target_alias@ 384top_build_prefix = @top_build_prefix@ 385top_builddir = @top_builddir@ 386top_srcdir = @top_srcdir@ 387SUBDIRS = include src man 388MAINTAINERCLEANFILES = ChangeLog INSTALL 389pkgconfigdir = $(libdir)/pkgconfig 390pkgconfig_DATA = xorg-mouse.pc 391 392# Provide an sdk location that is writable by this module 393DISTCHECK_CONFIGURE_FLAGS = --with-sdkdir='$${includedir}/xorg' 394all: config.h 395 $(MAKE) $(AM_MAKEFLAGS) all-recursive 396 397.SUFFIXES: 398am--refresh: Makefile 399 @: 400$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 401 @for dep in $?; do \ 402 case '$(am__configure_deps)' in \ 403 *$$dep*) \ 404 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 405 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 406 && exit 0; \ 407 exit 1;; \ 408 esac; \ 409 done; \ 410 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 411 $(am__cd) $(top_srcdir) && \ 412 $(AUTOMAKE) --foreign Makefile 413.PRECIOUS: Makefile 414Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 415 @case '$?' in \ 416 *config.status*) \ 417 echo ' $(SHELL) ./config.status'; \ 418 $(SHELL) ./config.status;; \ 419 *) \ 420 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ 421 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ 422 esac; 423 424$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 425 $(SHELL) ./config.status --recheck 426 427$(top_srcdir)/configure: $(am__configure_deps) 428 $(am__cd) $(srcdir) && $(AUTOCONF) 429$(ACLOCAL_M4): $(am__aclocal_m4_deps) 430 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 431$(am__aclocal_m4_deps): 432 433config.h: stamp-h1 434 @test -f $@ || rm -f stamp-h1 435 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 436 437stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 438 @rm -f stamp-h1 439 cd $(top_builddir) && $(SHELL) ./config.status config.h 440$(srcdir)/config.h.in: $(am__configure_deps) 441 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 442 rm -f stamp-h1 443 touch $@ 444 445distclean-hdr: 446 -rm -f config.h stamp-h1 447xorg-mouse.pc: $(top_builddir)/config.status $(srcdir)/xorg-mouse.pc.in 448 cd $(top_builddir) && $(SHELL) ./config.status $@ 449 450mostlyclean-libtool: 451 -rm -f *.lo 452 453clean-libtool: 454 -rm -rf .libs _libs 455 456distclean-libtool: 457 -rm -f libtool config.lt 458install-pkgconfigDATA: $(pkgconfig_DATA) 459 @$(NORMAL_INSTALL) 460 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ 461 if test -n "$$list"; then \ 462 echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ 463 $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ 464 fi; \ 465 for p in $$list; do \ 466 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 467 echo "$$d$$p"; \ 468 done | $(am__base_list) | \ 469 while read files; do \ 470 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ 471 $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ 472 done 473 474uninstall-pkgconfigDATA: 475 @$(NORMAL_UNINSTALL) 476 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ 477 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ 478 dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) 479 480# This directory's subdirectories are mostly independent; you can cd 481# into them and run 'make' without going through this Makefile. 482# To change the values of 'make' variables: instead of editing Makefiles, 483# (1) if the variable is set in 'config.status', edit 'config.status' 484# (which will cause the Makefiles to be regenerated when you run 'make'); 485# (2) otherwise, pass the desired values on the 'make' command line. 486$(am__recursive_targets): 487 @fail=; \ 488 if $(am__make_keepgoing); then \ 489 failcom='fail=yes'; \ 490 else \ 491 failcom='exit 1'; \ 492 fi; \ 493 dot_seen=no; \ 494 target=`echo $@ | sed s/-recursive//`; \ 495 case "$@" in \ 496 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 497 *) list='$(SUBDIRS)' ;; \ 498 esac; \ 499 for subdir in $$list; do \ 500 echo "Making $$target in $$subdir"; \ 501 if test "$$subdir" = "."; then \ 502 dot_seen=yes; \ 503 local_target="$$target-am"; \ 504 else \ 505 local_target="$$target"; \ 506 fi; \ 507 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 508 || eval $$failcom; \ 509 done; \ 510 if test "$$dot_seen" = "no"; then \ 511 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 512 fi; test -z "$$fail" 513 514ID: $(am__tagged_files) 515 $(am__define_uniq_tagged_files); mkid -fID $$unique 516tags: tags-recursive 517TAGS: tags 518 519tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 520 set x; \ 521 here=`pwd`; \ 522 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 523 include_option=--etags-include; \ 524 empty_fix=.; \ 525 else \ 526 include_option=--include; \ 527 empty_fix=; \ 528 fi; \ 529 list='$(SUBDIRS)'; for subdir in $$list; do \ 530 if test "$$subdir" = .; then :; else \ 531 test ! -f $$subdir/TAGS || \ 532 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 533 fi; \ 534 done; \ 535 $(am__define_uniq_tagged_files); \ 536 shift; \ 537 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 538 test -n "$$unique" || unique=$$empty_fix; \ 539 if test $$# -gt 0; then \ 540 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 541 "$$@" $$unique; \ 542 else \ 543 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 544 $$unique; \ 545 fi; \ 546 fi 547ctags: ctags-recursive 548 549CTAGS: ctags 550ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 551 $(am__define_uniq_tagged_files); \ 552 test -z "$(CTAGS_ARGS)$$unique" \ 553 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 554 $$unique 555 556GTAGS: 557 here=`$(am__cd) $(top_builddir) && pwd` \ 558 && $(am__cd) $(top_srcdir) \ 559 && gtags -i $(GTAGS_ARGS) "$$here" 560cscope: cscope.files 561 test ! -s cscope.files \ 562 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 563clean-cscope: 564 -rm -f cscope.files 565cscope.files: clean-cscope cscopelist 566cscopelist: cscopelist-recursive 567 568cscopelist-am: $(am__tagged_files) 569 list='$(am__tagged_files)'; \ 570 case "$(srcdir)" in \ 571 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 572 *) sdir=$(subdir)/$(srcdir) ;; \ 573 esac; \ 574 for i in $$list; do \ 575 if test -f "$$i"; then \ 576 echo "$(subdir)/$$i"; \ 577 else \ 578 echo "$$sdir/$$i"; \ 579 fi; \ 580 done >> $(top_builddir)/cscope.files 581 582distclean-tags: 583 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 584 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 585 586distdir: $(DISTFILES) 587 $(am__remove_distdir) 588 test -d "$(distdir)" || mkdir "$(distdir)" 589 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 590 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 591 list='$(DISTFILES)'; \ 592 dist_files=`for file in $$list; do echo $$file; done | \ 593 sed -e "s|^$$srcdirstrip/||;t" \ 594 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 595 case $$dist_files in \ 596 */*) $(MKDIR_P) `echo "$$dist_files" | \ 597 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 598 sort -u` ;; \ 599 esac; \ 600 for file in $$dist_files; do \ 601 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 602 if test -d $$d/$$file; then \ 603 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 604 if test -d "$(distdir)/$$file"; then \ 605 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 606 fi; \ 607 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 608 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 609 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 610 fi; \ 611 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 612 else \ 613 test -f "$(distdir)/$$file" \ 614 || cp -p $$d/$$file "$(distdir)/$$file" \ 615 || exit 1; \ 616 fi; \ 617 done 618 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 619 if test "$$subdir" = .; then :; else \ 620 $(am__make_dryrun) \ 621 || test -d "$(distdir)/$$subdir" \ 622 || $(MKDIR_P) "$(distdir)/$$subdir" \ 623 || exit 1; \ 624 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 625 $(am__relativize); \ 626 new_distdir=$$reldir; \ 627 dir1=$$subdir; dir2="$(top_distdir)"; \ 628 $(am__relativize); \ 629 new_top_distdir=$$reldir; \ 630 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 631 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 632 ($(am__cd) $$subdir && \ 633 $(MAKE) $(AM_MAKEFLAGS) \ 634 top_distdir="$$new_top_distdir" \ 635 distdir="$$new_distdir" \ 636 am__remove_distdir=: \ 637 am__skip_length_check=: \ 638 am__skip_mode_fix=: \ 639 distdir) \ 640 || exit 1; \ 641 fi; \ 642 done 643 $(MAKE) $(AM_MAKEFLAGS) \ 644 top_distdir="$(top_distdir)" distdir="$(distdir)" \ 645 dist-hook 646 -test -n "$(am__skip_mode_fix)" \ 647 || find "$(distdir)" -type d ! -perm -755 \ 648 -exec chmod u+rwx,go+rx {} \; -o \ 649 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 650 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 651 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 652 || chmod -R a+r "$(distdir)" 653dist-gzip: distdir 654 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz 655 $(am__post_remove_distdir) 656dist-bzip2: distdir 657 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 658 $(am__post_remove_distdir) 659 660dist-lzip: distdir 661 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 662 $(am__post_remove_distdir) 663 664dist-xz: distdir 665 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 666 $(am__post_remove_distdir) 667 668dist-tarZ: distdir 669 @echo WARNING: "Support for shar distribution archives is" \ 670 "deprecated." >&2 671 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 672 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 673 $(am__post_remove_distdir) 674 675dist-shar: distdir 676 @echo WARNING: "Support for distribution archives compressed with" \ 677 "legacy program 'compress' is deprecated." >&2 678 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 679 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz 680 $(am__post_remove_distdir) 681 682dist-zip: distdir 683 -rm -f $(distdir).zip 684 zip -rq $(distdir).zip $(distdir) 685 $(am__post_remove_distdir) 686 687dist dist-all: 688 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 689 $(am__post_remove_distdir) 690 691# This target untars the dist file and tries a VPATH configuration. Then 692# it guarantees that the distribution is self-contained by making another 693# tarfile. 694distcheck: dist 695 case '$(DIST_ARCHIVES)' in \ 696 *.tar.gz*) \ 697 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ 698 *.tar.bz2*) \ 699 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 700 *.tar.lz*) \ 701 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 702 *.tar.xz*) \ 703 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 704 *.tar.Z*) \ 705 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 706 *.shar.gz*) \ 707 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ 708 *.zip*) \ 709 unzip $(distdir).zip ;;\ 710 esac 711 chmod -R a-w $(distdir) 712 chmod u+w $(distdir) 713 mkdir $(distdir)/_build $(distdir)/_inst 714 chmod a-w $(distdir) 715 test -d $(distdir)/_build || exit 0; \ 716 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 717 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 718 && am__cwd=`pwd` \ 719 && $(am__cd) $(distdir)/_build \ 720 && ../configure \ 721 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 722 $(DISTCHECK_CONFIGURE_FLAGS) \ 723 --srcdir=.. --prefix="$$dc_install_base" \ 724 && $(MAKE) $(AM_MAKEFLAGS) \ 725 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 726 && $(MAKE) $(AM_MAKEFLAGS) check \ 727 && $(MAKE) $(AM_MAKEFLAGS) install \ 728 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 729 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 730 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 731 distuninstallcheck \ 732 && chmod -R a-w "$$dc_install_base" \ 733 && ({ \ 734 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 735 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 736 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 737 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 738 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 739 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 740 && rm -rf "$$dc_destdir" \ 741 && $(MAKE) $(AM_MAKEFLAGS) dist \ 742 && rm -rf $(DIST_ARCHIVES) \ 743 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 744 && cd "$$am__cwd" \ 745 || exit 1 746 $(am__post_remove_distdir) 747 @(echo "$(distdir) archives ready for distribution: "; \ 748 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 749 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 750distuninstallcheck: 751 @test -n '$(distuninstallcheck_dir)' || { \ 752 echo 'ERROR: trying to run $@ with an empty' \ 753 '$$(distuninstallcheck_dir)' >&2; \ 754 exit 1; \ 755 }; \ 756 $(am__cd) '$(distuninstallcheck_dir)' || { \ 757 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 758 exit 1; \ 759 }; \ 760 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 761 || { echo "ERROR: files left after uninstall:" ; \ 762 if test -n "$(DESTDIR)"; then \ 763 echo " (check DESTDIR support)"; \ 764 fi ; \ 765 $(distuninstallcheck_listfiles) ; \ 766 exit 1; } >&2 767distcleancheck: distclean 768 @if test '$(srcdir)' = . ; then \ 769 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 770 exit 1 ; \ 771 fi 772 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 773 || { echo "ERROR: files left in build directory after distclean:" ; \ 774 $(distcleancheck_listfiles) ; \ 775 exit 1; } >&2 776check-am: all-am 777check: check-recursive 778all-am: Makefile $(DATA) config.h 779installdirs: installdirs-recursive 780installdirs-am: 781 for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ 782 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ 783 done 784install: install-recursive 785install-exec: install-exec-recursive 786install-data: install-data-recursive 787uninstall: uninstall-recursive 788 789install-am: all-am 790 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 791 792installcheck: installcheck-recursive 793install-strip: 794 if test -z '$(STRIP)'; then \ 795 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 796 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 797 install; \ 798 else \ 799 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 800 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 801 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 802 fi 803mostlyclean-generic: 804 805clean-generic: 806 807distclean-generic: 808 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 809 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 810 811maintainer-clean-generic: 812 @echo "This command is intended for maintainers to use" 813 @echo "it deletes files that may require special tools to rebuild." 814 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 815clean: clean-recursive 816 817clean-am: clean-generic clean-libtool mostlyclean-am 818 819distclean: distclean-recursive 820 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 821 -rm -f Makefile 822distclean-am: clean-am distclean-generic distclean-hdr \ 823 distclean-libtool distclean-tags 824 825dvi: dvi-recursive 826 827dvi-am: 828 829html: html-recursive 830 831html-am: 832 833info: info-recursive 834 835info-am: 836 837install-data-am: install-pkgconfigDATA 838 839install-dvi: install-dvi-recursive 840 841install-dvi-am: 842 843install-exec-am: 844 845install-html: install-html-recursive 846 847install-html-am: 848 849install-info: install-info-recursive 850 851install-info-am: 852 853install-man: 854 855install-pdf: install-pdf-recursive 856 857install-pdf-am: 858 859install-ps: install-ps-recursive 860 861install-ps-am: 862 863installcheck-am: 864 865maintainer-clean: maintainer-clean-recursive 866 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 867 -rm -rf $(top_srcdir)/autom4te.cache 868 -rm -f Makefile 869maintainer-clean-am: distclean-am maintainer-clean-generic 870 871mostlyclean: mostlyclean-recursive 872 873mostlyclean-am: mostlyclean-generic mostlyclean-libtool 874 875pdf: pdf-recursive 876 877pdf-am: 878 879ps: ps-recursive 880 881ps-am: 882 883uninstall-am: uninstall-pkgconfigDATA 884 885.MAKE: $(am__recursive_targets) all install-am install-strip 886 887.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 888 am--refresh check check-am clean clean-cscope clean-generic \ 889 clean-libtool cscope cscopelist-am ctags ctags-am dist \ 890 dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ 891 dist-tarZ dist-xz dist-zip distcheck distclean \ 892 distclean-generic distclean-hdr distclean-libtool \ 893 distclean-tags distcleancheck distdir distuninstallcheck dvi \ 894 dvi-am html html-am info info-am install install-am \ 895 install-data install-data-am install-dvi install-dvi-am \ 896 install-exec install-exec-am install-html install-html-am \ 897 install-info install-info-am install-man install-pdf \ 898 install-pdf-am install-pkgconfigDATA install-ps install-ps-am \ 899 install-strip installcheck installcheck-am installdirs \ 900 installdirs-am maintainer-clean maintainer-clean-generic \ 901 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ 902 ps ps-am tags tags-am uninstall uninstall-am \ 903 uninstall-pkgconfigDATA 904 905 906.PHONY: ChangeLog INSTALL 907 908INSTALL: 909 $(INSTALL_CMD) 910 911ChangeLog: 912 $(CHANGELOG_CMD) 913 914dist-hook: ChangeLog INSTALL 915 916# Check source code with tools like lint & sparse 917@LINT_TRUE@lint: 918@LINT_TRUE@ (cd src && $(MAKE) $(MAKEFLAGS) lint) 919 920# Tell versions [3.59,3.63) of GNU make to not export all variables. 921# Otherwise a system limit (for SysV at least) may be exceeded. 922.NOEXPORT: 923