Makefile.in revision 11bf0794
1# Makefile.in generated by automake 1.15 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2014 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# Copyright 2005 Adam Jackson. 18# 19# Permission is hereby granted, free of charge, to any person obtaining a 20# copy of this software and associated documentation files (the "Software"), 21# to deal in the Software without restriction, including without limitation 22# on the rights to use, copy, modify, merge, publish, distribute, sub 23# license, and/or sell copies of the Software, and to permit persons to whom 24# the Software is furnished to do so, subject to the following conditions: 25# 26# The above copyright notice and this permission notice (including the next 27# paragraph) shall be included in all copies or substantial portions of the 28# Software. 29# 30# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 31# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 32# FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL 33# ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER 34# IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 35# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 36VPATH = @srcdir@ 37am__is_gnu_make = { \ 38 if test -z '$(MAKELEVEL)'; then \ 39 false; \ 40 elif test -n '$(MAKE_HOST)'; then \ 41 true; \ 42 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ 43 true; \ 44 else \ 45 false; \ 46 fi; \ 47} 48am__make_running_with_option = \ 49 case $${target_option-} in \ 50 ?) ;; \ 51 *) echo "am__make_running_with_option: internal error: invalid" \ 52 "target option '$${target_option-}' specified" >&2; \ 53 exit 1;; \ 54 esac; \ 55 has_opt=no; \ 56 sane_makeflags=$$MAKEFLAGS; \ 57 if $(am__is_gnu_make); then \ 58 sane_makeflags=$$MFLAGS; \ 59 else \ 60 case $$MAKEFLAGS in \ 61 *\\[\ \ ]*) \ 62 bs=\\; \ 63 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 64 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 65 esac; \ 66 fi; \ 67 skip_next=no; \ 68 strip_trailopt () \ 69 { \ 70 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 71 }; \ 72 for flg in $$sane_makeflags; do \ 73 test $$skip_next = yes && { skip_next=no; continue; }; \ 74 case $$flg in \ 75 *=*|--*) continue;; \ 76 -*I) strip_trailopt 'I'; skip_next=yes;; \ 77 -*I?*) strip_trailopt 'I';; \ 78 -*O) strip_trailopt 'O'; skip_next=yes;; \ 79 -*O?*) strip_trailopt 'O';; \ 80 -*l) strip_trailopt 'l'; skip_next=yes;; \ 81 -*l?*) strip_trailopt 'l';; \ 82 -[dEDm]) skip_next=yes;; \ 83 -[JT]) skip_next=yes;; \ 84 esac; \ 85 case $$flg in \ 86 *$$target_option*) has_opt=yes; break;; \ 87 esac; \ 88 done; \ 89 test $$has_opt = yes 90am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 91am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 92pkgdatadir = $(datadir)/@PACKAGE@ 93pkgincludedir = $(includedir)/@PACKAGE@ 94pkglibdir = $(libdir)/@PACKAGE@ 95pkglibexecdir = $(libexecdir)/@PACKAGE@ 96am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 97install_sh_DATA = $(install_sh) -c -m 644 98install_sh_PROGRAM = $(install_sh) -c 99install_sh_SCRIPT = $(install_sh) -c 100INSTALL_HEADER = $(INSTALL_DATA) 101transform = $(program_transform_name) 102NORMAL_INSTALL = : 103PRE_INSTALL = : 104POST_INSTALL = : 105NORMAL_UNINSTALL = : 106PRE_UNINSTALL = : 107POST_UNINSTALL = : 108build_triplet = @build@ 109host_triplet = @host@ 110subdir = . 111ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 112am__aclocal_m4_deps = $(top_srcdir)/configure.ac 113am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 114 $(ACLOCAL_M4) 115DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ 116 $(am__configure_deps) $(am__DIST_COMMON) 117am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 118 configure.lineno config.status.lineno 119mkinstalldirs = $(install_sh) -d 120CONFIG_HEADER = config.h 121CONFIG_CLEAN_FILES = 122CONFIG_CLEAN_VPATH_FILES = 123AM_V_P = $(am__v_P_@AM_V@) 124am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 125am__v_P_0 = false 126am__v_P_1 = : 127AM_V_GEN = $(am__v_GEN_@AM_V@) 128am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 129am__v_GEN_0 = @echo " GEN " $@; 130am__v_GEN_1 = 131AM_V_at = $(am__v_at_@AM_V@) 132am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 133am__v_at_0 = @ 134am__v_at_1 = 135SOURCES = 136DIST_SOURCES = 137RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 138 ctags-recursive dvi-recursive html-recursive info-recursive \ 139 install-data-recursive install-dvi-recursive \ 140 install-exec-recursive install-html-recursive \ 141 install-info-recursive install-pdf-recursive \ 142 install-ps-recursive install-recursive installcheck-recursive \ 143 installdirs-recursive pdf-recursive ps-recursive \ 144 tags-recursive uninstall-recursive 145am__can_run_installinfo = \ 146 case $$AM_UPDATE_INFO_DIR in \ 147 n|no|NO) false;; \ 148 *) (install-info --version) >/dev/null 2>&1;; \ 149 esac 150RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 151 distclean-recursive maintainer-clean-recursive 152am__recursive_targets = \ 153 $(RECURSIVE_TARGETS) \ 154 $(RECURSIVE_CLEAN_TARGETS) \ 155 $(am__extra_recursive_targets) 156AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 157 cscope distdir dist dist-all distcheck 158am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ 159 $(LISP)config.h.in 160# Read a list of newline-separated strings from the standard input, 161# and print each of them once, without duplicates. Input order is 162# *not* preserved. 163am__uniquify_input = $(AWK) '\ 164 BEGIN { nonempty = 0; } \ 165 { items[$$0] = 1; nonempty = 1; } \ 166 END { if (nonempty) { for (i in items) print i; }; } \ 167' 168# Make sure the list of sources is unique. This is necessary because, 169# e.g., the same source file might be shared among _SOURCES variables 170# for different programs/libraries. 171am__define_uniq_tagged_files = \ 172 list='$(am__tagged_files)'; \ 173 unique=`for i in $$list; do \ 174 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 175 done | $(am__uniquify_input)` 176ETAGS = etags 177CTAGS = ctags 178CSCOPE = cscope 179DIST_SUBDIRS = $(SUBDIRS) 180am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in COPYING \ 181 ChangeLog INSTALL README compile config.guess config.sub \ 182 install-sh ltmain.sh missing 183DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 184distdir = $(PACKAGE)-$(VERSION) 185top_distdir = $(distdir) 186am__remove_distdir = \ 187 if test -d "$(distdir)"; then \ 188 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 189 && rm -rf "$(distdir)" \ 190 || { sleep 5 && rm -rf "$(distdir)"; }; \ 191 else :; fi 192am__post_remove_distdir = $(am__remove_distdir) 193am__relativize = \ 194 dir0=`pwd`; \ 195 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 196 sed_rest='s,^[^/]*/*,,'; \ 197 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 198 sed_butlast='s,/*[^/]*$$,,'; \ 199 while test -n "$$dir1"; do \ 200 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 201 if test "$$first" != "."; then \ 202 if test "$$first" = ".."; then \ 203 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 204 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 205 else \ 206 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 207 if test "$$first2" = "$$first"; then \ 208 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 209 else \ 210 dir2="../$$dir2"; \ 211 fi; \ 212 dir0="$$dir0"/"$$first"; \ 213 fi; \ 214 fi; \ 215 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 216 done; \ 217 reldir="$$dir2" 218DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 219GZIP_ENV = --best 220DIST_TARGETS = dist-bzip2 dist-gzip 221distuninstallcheck_listfiles = find . -type f -print 222am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 223 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 224distcleancheck_listfiles = find . -type f -print 225ACLOCAL = @ACLOCAL@ 226ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ 227ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ 228AMTAR = @AMTAR@ 229AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 230APP_MAN_DIR = @APP_MAN_DIR@ 231APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ 232AR = @AR@ 233AUTOCONF = @AUTOCONF@ 234AUTOHEADER = @AUTOHEADER@ 235AUTOMAKE = @AUTOMAKE@ 236AWK = @AWK@ 237BASE_CFLAGS = @BASE_CFLAGS@ 238CC = @CC@ 239CCDEPMODE = @CCDEPMODE@ 240CFLAGS = @CFLAGS@ 241CHANGELOG_CMD = @CHANGELOG_CMD@ 242CPP = @CPP@ 243CPPFLAGS = @CPPFLAGS@ 244CWARNFLAGS = @CWARNFLAGS@ 245CYGPATH_W = @CYGPATH_W@ 246DEFS = @DEFS@ 247DEPDIR = @DEPDIR@ 248DLLTOOL = @DLLTOOL@ 249DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ 250DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ 251DRIVER_NAME = @DRIVER_NAME@ 252DSYMUTIL = @DSYMUTIL@ 253DUMPBIN = @DUMPBIN@ 254ECHO_C = @ECHO_C@ 255ECHO_N = @ECHO_N@ 256ECHO_T = @ECHO_T@ 257EGREP = @EGREP@ 258EXEEXT = @EXEEXT@ 259FGREP = @FGREP@ 260FILE_MAN_DIR = @FILE_MAN_DIR@ 261FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ 262GBM_CFLAGS = @GBM_CFLAGS@ 263GBM_LIBS = @GBM_LIBS@ 264GREP = @GREP@ 265INSTALL = @INSTALL@ 266INSTALL_CMD = @INSTALL_CMD@ 267INSTALL_DATA = @INSTALL_DATA@ 268INSTALL_PROGRAM = @INSTALL_PROGRAM@ 269INSTALL_SCRIPT = @INSTALL_SCRIPT@ 270INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 271LD = @LD@ 272LDFLAGS = @LDFLAGS@ 273LIBDRM_AMDGPU_CFLAGS = @LIBDRM_AMDGPU_CFLAGS@ 274LIBDRM_AMDGPU_LIBS = @LIBDRM_AMDGPU_LIBS@ 275LIBDRM_CFLAGS = @LIBDRM_CFLAGS@ 276LIBDRM_LIBS = @LIBDRM_LIBS@ 277LIBGLAMOR_CFLAGS = @LIBGLAMOR_CFLAGS@ 278LIBGLAMOR_EGL_CFLAGS = @LIBGLAMOR_EGL_CFLAGS@ 279LIBGLAMOR_EGL_LIBS = @LIBGLAMOR_EGL_LIBS@ 280LIBGLAMOR_LIBS = @LIBGLAMOR_LIBS@ 281LIBGL_CFLAGS = @LIBGL_CFLAGS@ 282LIBGL_LIBS = @LIBGL_LIBS@ 283LIBOBJS = @LIBOBJS@ 284LIBS = @LIBS@ 285LIBTOOL = @LIBTOOL@ 286LIBUDEV_CFLAGS = @LIBUDEV_CFLAGS@ 287LIBUDEV_LIBS = @LIBUDEV_LIBS@ 288LIB_MAN_DIR = @LIB_MAN_DIR@ 289LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ 290LIPO = @LIPO@ 291LN_S = @LN_S@ 292LTLIBOBJS = @LTLIBOBJS@ 293LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ 294MAKEINFO = @MAKEINFO@ 295MANIFEST_TOOL = @MANIFEST_TOOL@ 296MAN_SUBSTS = @MAN_SUBSTS@ 297MISC_MAN_DIR = @MISC_MAN_DIR@ 298MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ 299MKDIR_P = @MKDIR_P@ 300NM = @NM@ 301NMEDIT = @NMEDIT@ 302OBJDUMP = @OBJDUMP@ 303OBJEXT = @OBJEXT@ 304OTOOL = @OTOOL@ 305OTOOL64 = @OTOOL64@ 306PACKAGE = @PACKAGE@ 307PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 308PACKAGE_NAME = @PACKAGE_NAME@ 309PACKAGE_STRING = @PACKAGE_STRING@ 310PACKAGE_TARNAME = @PACKAGE_TARNAME@ 311PACKAGE_URL = @PACKAGE_URL@ 312PACKAGE_VERSION = @PACKAGE_VERSION@ 313PATH_SEPARATOR = @PATH_SEPARATOR@ 314PKG_CONFIG = @PKG_CONFIG@ 315PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ 316PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ 317RANLIB = @RANLIB@ 318SED = @SED@ 319SET_MAKE = @SET_MAKE@ 320SHELL = @SHELL@ 321STRICT_CFLAGS = @STRICT_CFLAGS@ 322STRIP = @STRIP@ 323VERSION = @VERSION@ 324XEXT_CFLAGS = @XEXT_CFLAGS@ 325XEXT_LIBS = @XEXT_LIBS@ 326XORG_CFLAGS = @XORG_CFLAGS@ 327XORG_LIBS = @XORG_LIBS@ 328XORG_MAN_PAGE = @XORG_MAN_PAGE@ 329abs_builddir = @abs_builddir@ 330abs_srcdir = @abs_srcdir@ 331abs_top_builddir = @abs_top_builddir@ 332abs_top_srcdir = @abs_top_srcdir@ 333ac_ct_AR = @ac_ct_AR@ 334ac_ct_CC = @ac_ct_CC@ 335ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 336am__include = @am__include@ 337am__leading_dot = @am__leading_dot@ 338am__quote = @am__quote@ 339am__tar = @am__tar@ 340am__untar = @am__untar@ 341bindir = @bindir@ 342build = @build@ 343build_alias = @build_alias@ 344build_cpu = @build_cpu@ 345build_os = @build_os@ 346build_vendor = @build_vendor@ 347builddir = @builddir@ 348configdir = @configdir@ 349datadir = @datadir@ 350datarootdir = @datarootdir@ 351docdir = @docdir@ 352dvidir = @dvidir@ 353exec_prefix = @exec_prefix@ 354host = @host@ 355host_alias = @host_alias@ 356host_cpu = @host_cpu@ 357host_os = @host_os@ 358host_vendor = @host_vendor@ 359htmldir = @htmldir@ 360includedir = @includedir@ 361infodir = @infodir@ 362install_sh = @install_sh@ 363libdir = @libdir@ 364libexecdir = @libexecdir@ 365localedir = @localedir@ 366localstatedir = @localstatedir@ 367mandir = @mandir@ 368mkdir_p = @mkdir_p@ 369moduledir = @moduledir@ 370oldincludedir = @oldincludedir@ 371pdfdir = @pdfdir@ 372prefix = @prefix@ 373program_transform_name = @program_transform_name@ 374psdir = @psdir@ 375runstatedir = @runstatedir@ 376sbindir = @sbindir@ 377sharedstatedir = @sharedstatedir@ 378srcdir = @srcdir@ 379sysconfdir = @sysconfdir@ 380target_alias = @target_alias@ 381top_build_prefix = @top_build_prefix@ 382top_builddir = @top_builddir@ 383top_srcdir = @top_srcdir@ 384SUBDIRS = src man conf 385MAINTAINERCLEANFILES = ChangeLog INSTALL 386EXTRA_DIST = ChangeLog INSTALL 387all: config.h 388 $(MAKE) $(AM_MAKEFLAGS) all-recursive 389 390.SUFFIXES: 391am--refresh: Makefile 392 @: 393$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 394 @for dep in $?; do \ 395 case '$(am__configure_deps)' in \ 396 *$$dep*) \ 397 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 398 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 399 && exit 0; \ 400 exit 1;; \ 401 esac; \ 402 done; \ 403 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 404 $(am__cd) $(top_srcdir) && \ 405 $(AUTOMAKE) --foreign Makefile 406Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 407 @case '$?' in \ 408 *config.status*) \ 409 echo ' $(SHELL) ./config.status'; \ 410 $(SHELL) ./config.status;; \ 411 *) \ 412 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ 413 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ 414 esac; 415 416$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 417 $(SHELL) ./config.status --recheck 418 419$(top_srcdir)/configure: $(am__configure_deps) 420 $(am__cd) $(srcdir) && $(AUTOCONF) 421$(ACLOCAL_M4): $(am__aclocal_m4_deps) 422 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 423$(am__aclocal_m4_deps): 424 425config.h: stamp-h1 426 @test -f $@ || rm -f stamp-h1 427 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 428 429stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 430 @rm -f stamp-h1 431 cd $(top_builddir) && $(SHELL) ./config.status config.h 432$(srcdir)/config.h.in: $(am__configure_deps) 433 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 434 rm -f stamp-h1 435 touch $@ 436 437distclean-hdr: 438 -rm -f config.h stamp-h1 439 440mostlyclean-libtool: 441 -rm -f *.lo 442 443clean-libtool: 444 -rm -rf .libs _libs 445 446distclean-libtool: 447 -rm -f libtool config.lt 448 449# This directory's subdirectories are mostly independent; you can cd 450# into them and run 'make' without going through this Makefile. 451# To change the values of 'make' variables: instead of editing Makefiles, 452# (1) if the variable is set in 'config.status', edit 'config.status' 453# (which will cause the Makefiles to be regenerated when you run 'make'); 454# (2) otherwise, pass the desired values on the 'make' command line. 455$(am__recursive_targets): 456 @fail=; \ 457 if $(am__make_keepgoing); then \ 458 failcom='fail=yes'; \ 459 else \ 460 failcom='exit 1'; \ 461 fi; \ 462 dot_seen=no; \ 463 target=`echo $@ | sed s/-recursive//`; \ 464 case "$@" in \ 465 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 466 *) list='$(SUBDIRS)' ;; \ 467 esac; \ 468 for subdir in $$list; do \ 469 echo "Making $$target in $$subdir"; \ 470 if test "$$subdir" = "."; then \ 471 dot_seen=yes; \ 472 local_target="$$target-am"; \ 473 else \ 474 local_target="$$target"; \ 475 fi; \ 476 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 477 || eval $$failcom; \ 478 done; \ 479 if test "$$dot_seen" = "no"; then \ 480 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 481 fi; test -z "$$fail" 482 483ID: $(am__tagged_files) 484 $(am__define_uniq_tagged_files); mkid -fID $$unique 485tags: tags-recursive 486TAGS: tags 487 488tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 489 set x; \ 490 here=`pwd`; \ 491 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 492 include_option=--etags-include; \ 493 empty_fix=.; \ 494 else \ 495 include_option=--include; \ 496 empty_fix=; \ 497 fi; \ 498 list='$(SUBDIRS)'; for subdir in $$list; do \ 499 if test "$$subdir" = .; then :; else \ 500 test ! -f $$subdir/TAGS || \ 501 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 502 fi; \ 503 done; \ 504 $(am__define_uniq_tagged_files); \ 505 shift; \ 506 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 507 test -n "$$unique" || unique=$$empty_fix; \ 508 if test $$# -gt 0; then \ 509 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 510 "$$@" $$unique; \ 511 else \ 512 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 513 $$unique; \ 514 fi; \ 515 fi 516ctags: ctags-recursive 517 518CTAGS: ctags 519ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 520 $(am__define_uniq_tagged_files); \ 521 test -z "$(CTAGS_ARGS)$$unique" \ 522 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 523 $$unique 524 525GTAGS: 526 here=`$(am__cd) $(top_builddir) && pwd` \ 527 && $(am__cd) $(top_srcdir) \ 528 && gtags -i $(GTAGS_ARGS) "$$here" 529cscope: cscope.files 530 test ! -s cscope.files \ 531 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 532clean-cscope: 533 -rm -f cscope.files 534cscope.files: clean-cscope cscopelist 535cscopelist: cscopelist-recursive 536 537cscopelist-am: $(am__tagged_files) 538 list='$(am__tagged_files)'; \ 539 case "$(srcdir)" in \ 540 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 541 *) sdir=$(subdir)/$(srcdir) ;; \ 542 esac; \ 543 for i in $$list; do \ 544 if test -f "$$i"; then \ 545 echo "$(subdir)/$$i"; \ 546 else \ 547 echo "$$sdir/$$i"; \ 548 fi; \ 549 done >> $(top_builddir)/cscope.files 550 551distclean-tags: 552 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 553 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 554 555distdir: $(DISTFILES) 556 $(am__remove_distdir) 557 test -d "$(distdir)" || mkdir "$(distdir)" 558 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 559 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 560 list='$(DISTFILES)'; \ 561 dist_files=`for file in $$list; do echo $$file; done | \ 562 sed -e "s|^$$srcdirstrip/||;t" \ 563 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 564 case $$dist_files in \ 565 */*) $(MKDIR_P) `echo "$$dist_files" | \ 566 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 567 sort -u` ;; \ 568 esac; \ 569 for file in $$dist_files; do \ 570 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 571 if test -d $$d/$$file; then \ 572 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 573 if test -d "$(distdir)/$$file"; then \ 574 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 575 fi; \ 576 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 577 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 578 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 579 fi; \ 580 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 581 else \ 582 test -f "$(distdir)/$$file" \ 583 || cp -p $$d/$$file "$(distdir)/$$file" \ 584 || exit 1; \ 585 fi; \ 586 done 587 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 588 if test "$$subdir" = .; then :; else \ 589 $(am__make_dryrun) \ 590 || test -d "$(distdir)/$$subdir" \ 591 || $(MKDIR_P) "$(distdir)/$$subdir" \ 592 || exit 1; \ 593 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 594 $(am__relativize); \ 595 new_distdir=$$reldir; \ 596 dir1=$$subdir; dir2="$(top_distdir)"; \ 597 $(am__relativize); \ 598 new_top_distdir=$$reldir; \ 599 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 600 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 601 ($(am__cd) $$subdir && \ 602 $(MAKE) $(AM_MAKEFLAGS) \ 603 top_distdir="$$new_top_distdir" \ 604 distdir="$$new_distdir" \ 605 am__remove_distdir=: \ 606 am__skip_length_check=: \ 607 am__skip_mode_fix=: \ 608 distdir) \ 609 || exit 1; \ 610 fi; \ 611 done 612 -test -n "$(am__skip_mode_fix)" \ 613 || find "$(distdir)" -type d ! -perm -755 \ 614 -exec chmod u+rwx,go+rx {} \; -o \ 615 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 616 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 617 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 618 || chmod -R a+r "$(distdir)" 619dist-gzip: distdir 620 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz 621 $(am__post_remove_distdir) 622dist-bzip2: distdir 623 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 624 $(am__post_remove_distdir) 625 626dist-lzip: distdir 627 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 628 $(am__post_remove_distdir) 629 630dist-xz: distdir 631 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 632 $(am__post_remove_distdir) 633 634dist-tarZ: distdir 635 @echo WARNING: "Support for distribution archives compressed with" \ 636 "legacy program 'compress' is deprecated." >&2 637 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 638 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 639 $(am__post_remove_distdir) 640 641dist-shar: distdir 642 @echo WARNING: "Support for shar distribution archives is" \ 643 "deprecated." >&2 644 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 645 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz 646 $(am__post_remove_distdir) 647 648dist-zip: distdir 649 -rm -f $(distdir).zip 650 zip -rq $(distdir).zip $(distdir) 651 $(am__post_remove_distdir) 652 653dist dist-all: 654 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 655 $(am__post_remove_distdir) 656 657# This target untars the dist file and tries a VPATH configuration. Then 658# it guarantees that the distribution is self-contained by making another 659# tarfile. 660distcheck: dist 661 case '$(DIST_ARCHIVES)' in \ 662 *.tar.gz*) \ 663 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ 664 *.tar.bz2*) \ 665 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 666 *.tar.lz*) \ 667 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 668 *.tar.xz*) \ 669 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 670 *.tar.Z*) \ 671 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 672 *.shar.gz*) \ 673 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ 674 *.zip*) \ 675 unzip $(distdir).zip ;;\ 676 esac 677 chmod -R a-w $(distdir) 678 chmod u+w $(distdir) 679 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst 680 chmod a-w $(distdir) 681 test -d $(distdir)/_build || exit 0; \ 682 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 683 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 684 && am__cwd=`pwd` \ 685 && $(am__cd) $(distdir)/_build/sub \ 686 && ../../configure \ 687 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 688 $(DISTCHECK_CONFIGURE_FLAGS) \ 689 --srcdir=../.. --prefix="$$dc_install_base" \ 690 && $(MAKE) $(AM_MAKEFLAGS) \ 691 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 692 && $(MAKE) $(AM_MAKEFLAGS) check \ 693 && $(MAKE) $(AM_MAKEFLAGS) install \ 694 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 695 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 696 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 697 distuninstallcheck \ 698 && chmod -R a-w "$$dc_install_base" \ 699 && ({ \ 700 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 701 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 702 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 703 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 704 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 705 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 706 && rm -rf "$$dc_destdir" \ 707 && $(MAKE) $(AM_MAKEFLAGS) dist \ 708 && rm -rf $(DIST_ARCHIVES) \ 709 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 710 && cd "$$am__cwd" \ 711 || exit 1 712 $(am__post_remove_distdir) 713 @(echo "$(distdir) archives ready for distribution: "; \ 714 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 715 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 716distuninstallcheck: 717 @test -n '$(distuninstallcheck_dir)' || { \ 718 echo 'ERROR: trying to run $@ with an empty' \ 719 '$$(distuninstallcheck_dir)' >&2; \ 720 exit 1; \ 721 }; \ 722 $(am__cd) '$(distuninstallcheck_dir)' || { \ 723 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 724 exit 1; \ 725 }; \ 726 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 727 || { echo "ERROR: files left after uninstall:" ; \ 728 if test -n "$(DESTDIR)"; then \ 729 echo " (check DESTDIR support)"; \ 730 fi ; \ 731 $(distuninstallcheck_listfiles) ; \ 732 exit 1; } >&2 733distcleancheck: distclean 734 @if test '$(srcdir)' = . ; then \ 735 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 736 exit 1 ; \ 737 fi 738 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 739 || { echo "ERROR: files left in build directory after distclean:" ; \ 740 $(distcleancheck_listfiles) ; \ 741 exit 1; } >&2 742check-am: all-am 743check: check-recursive 744all-am: Makefile config.h 745installdirs: installdirs-recursive 746installdirs-am: 747install: install-recursive 748install-exec: install-exec-recursive 749install-data: install-data-recursive 750uninstall: uninstall-recursive 751 752install-am: all-am 753 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 754 755installcheck: installcheck-recursive 756install-strip: 757 if test -z '$(STRIP)'; then \ 758 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 759 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 760 install; \ 761 else \ 762 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 763 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 764 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 765 fi 766mostlyclean-generic: 767 768clean-generic: 769 770distclean-generic: 771 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 772 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 773 774maintainer-clean-generic: 775 @echo "This command is intended for maintainers to use" 776 @echo "it deletes files that may require special tools to rebuild." 777 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 778clean: clean-recursive 779 780clean-am: clean-generic clean-libtool mostlyclean-am 781 782distclean: distclean-recursive 783 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 784 -rm -f Makefile 785distclean-am: clean-am distclean-generic distclean-hdr \ 786 distclean-libtool distclean-tags 787 788dvi: dvi-recursive 789 790dvi-am: 791 792html: html-recursive 793 794html-am: 795 796info: info-recursive 797 798info-am: 799 800install-data-am: 801 802install-dvi: install-dvi-recursive 803 804install-dvi-am: 805 806install-exec-am: 807 808install-html: install-html-recursive 809 810install-html-am: 811 812install-info: install-info-recursive 813 814install-info-am: 815 816install-man: 817 818install-pdf: install-pdf-recursive 819 820install-pdf-am: 821 822install-ps: install-ps-recursive 823 824install-ps-am: 825 826installcheck-am: 827 828maintainer-clean: maintainer-clean-recursive 829 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 830 -rm -rf $(top_srcdir)/autom4te.cache 831 -rm -f Makefile 832maintainer-clean-am: distclean-am maintainer-clean-generic 833 834mostlyclean: mostlyclean-recursive 835 836mostlyclean-am: mostlyclean-generic mostlyclean-libtool 837 838pdf: pdf-recursive 839 840pdf-am: 841 842ps: ps-recursive 843 844ps-am: 845 846uninstall-am: 847 848.MAKE: $(am__recursive_targets) all install-am install-strip 849 850.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 851 am--refresh check check-am clean clean-cscope clean-generic \ 852 clean-libtool cscope cscopelist-am ctags ctags-am dist \ 853 dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \ 854 dist-xz dist-zip distcheck distclean distclean-generic \ 855 distclean-hdr distclean-libtool distclean-tags distcleancheck \ 856 distdir distuninstallcheck dvi dvi-am html html-am info \ 857 info-am install install-am install-data install-data-am \ 858 install-dvi install-dvi-am install-exec install-exec-am \ 859 install-html install-html-am install-info install-info-am \ 860 install-man install-pdf install-pdf-am install-ps \ 861 install-ps-am install-strip installcheck installcheck-am \ 862 installdirs installdirs-am maintainer-clean \ 863 maintainer-clean-generic mostlyclean mostlyclean-generic \ 864 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ 865 uninstall-am 866 867.PRECIOUS: Makefile 868 869 870.PHONY: ChangeLog INSTALL 871 872INSTALL: 873 $(INSTALL_CMD) 874 875ChangeLog: 876 $(CHANGELOG_CMD) 877 878# Tell versions [3.59,3.63) of GNU make to not export all variables. 879# Otherwise a system limit (for SysV at least) may be exceeded. 880.NOEXPORT: 881