Makefile.in revision 24b90cf4
1# Makefile.in generated by automake 1.15.1 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2017 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# Copyright 2005 Adam Jackson. 18# 19# Permission is hereby granted, free of charge, to any person obtaining a 20# copy of this software and associated documentation files (the "Software"), 21# to deal in the Software without restriction, including without limitation 22# on the rights to use, copy, modify, merge, publish, distribute, sub 23# license, and/or sell copies of the Software, and to permit persons to whom 24# the Software is furnished to do so, subject to the following conditions: 25# 26# The above copyright notice and this permission notice (including the next 27# paragraph) shall be included in all copies or substantial portions of the 28# Software. 29# 30# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 31# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 32# FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL 33# ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER 34# IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 35# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 36VPATH = @srcdir@ 37am__is_gnu_make = { \ 38 if test -z '$(MAKELEVEL)'; then \ 39 false; \ 40 elif test -n '$(MAKE_HOST)'; then \ 41 true; \ 42 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ 43 true; \ 44 else \ 45 false; \ 46 fi; \ 47} 48am__make_running_with_option = \ 49 case $${target_option-} in \ 50 ?) ;; \ 51 *) echo "am__make_running_with_option: internal error: invalid" \ 52 "target option '$${target_option-}' specified" >&2; \ 53 exit 1;; \ 54 esac; \ 55 has_opt=no; \ 56 sane_makeflags=$$MAKEFLAGS; \ 57 if $(am__is_gnu_make); then \ 58 sane_makeflags=$$MFLAGS; \ 59 else \ 60 case $$MAKEFLAGS in \ 61 *\\[\ \ ]*) \ 62 bs=\\; \ 63 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 64 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 65 esac; \ 66 fi; \ 67 skip_next=no; \ 68 strip_trailopt () \ 69 { \ 70 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 71 }; \ 72 for flg in $$sane_makeflags; do \ 73 test $$skip_next = yes && { skip_next=no; continue; }; \ 74 case $$flg in \ 75 *=*|--*) continue;; \ 76 -*I) strip_trailopt 'I'; skip_next=yes;; \ 77 -*I?*) strip_trailopt 'I';; \ 78 -*O) strip_trailopt 'O'; skip_next=yes;; \ 79 -*O?*) strip_trailopt 'O';; \ 80 -*l) strip_trailopt 'l'; skip_next=yes;; \ 81 -*l?*) strip_trailopt 'l';; \ 82 -[dEDm]) skip_next=yes;; \ 83 -[JT]) skip_next=yes;; \ 84 esac; \ 85 case $$flg in \ 86 *$$target_option*) has_opt=yes; break;; \ 87 esac; \ 88 done; \ 89 test $$has_opt = yes 90am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 91am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 92pkgdatadir = $(datadir)/@PACKAGE@ 93pkgincludedir = $(includedir)/@PACKAGE@ 94pkglibdir = $(libdir)/@PACKAGE@ 95pkglibexecdir = $(libexecdir)/@PACKAGE@ 96am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 97install_sh_DATA = $(install_sh) -c -m 644 98install_sh_PROGRAM = $(install_sh) -c 99install_sh_SCRIPT = $(install_sh) -c 100INSTALL_HEADER = $(INSTALL_DATA) 101transform = $(program_transform_name) 102NORMAL_INSTALL = : 103PRE_INSTALL = : 104POST_INSTALL = : 105NORMAL_UNINSTALL = : 106PRE_UNINSTALL = : 107POST_UNINSTALL = : 108build_triplet = @build@ 109host_triplet = @host@ 110subdir = . 111ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 112am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ 113 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ 114 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ 115 $(top_srcdir)/configure.ac 116am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 117 $(ACLOCAL_M4) 118DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ 119 $(am__configure_deps) $(am__DIST_COMMON) 120am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 121 configure.lineno config.status.lineno 122mkinstalldirs = $(install_sh) -d 123CONFIG_HEADER = config.h 124CONFIG_CLEAN_FILES = 125CONFIG_CLEAN_VPATH_FILES = 126AM_V_P = $(am__v_P_@AM_V@) 127am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 128am__v_P_0 = false 129am__v_P_1 = : 130AM_V_GEN = $(am__v_GEN_@AM_V@) 131am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 132am__v_GEN_0 = @echo " GEN " $@; 133am__v_GEN_1 = 134AM_V_at = $(am__v_at_@AM_V@) 135am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 136am__v_at_0 = @ 137am__v_at_1 = 138SOURCES = 139DIST_SOURCES = 140RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 141 ctags-recursive dvi-recursive html-recursive info-recursive \ 142 install-data-recursive install-dvi-recursive \ 143 install-exec-recursive install-html-recursive \ 144 install-info-recursive install-pdf-recursive \ 145 install-ps-recursive install-recursive installcheck-recursive \ 146 installdirs-recursive pdf-recursive ps-recursive \ 147 tags-recursive uninstall-recursive 148am__can_run_installinfo = \ 149 case $$AM_UPDATE_INFO_DIR in \ 150 n|no|NO) false;; \ 151 *) (install-info --version) >/dev/null 2>&1;; \ 152 esac 153RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 154 distclean-recursive maintainer-clean-recursive 155am__recursive_targets = \ 156 $(RECURSIVE_TARGETS) \ 157 $(RECURSIVE_CLEAN_TARGETS) \ 158 $(am__extra_recursive_targets) 159AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 160 cscope distdir dist dist-all distcheck 161am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ 162 $(LISP)config.h.in 163# Read a list of newline-separated strings from the standard input, 164# and print each of them once, without duplicates. Input order is 165# *not* preserved. 166am__uniquify_input = $(AWK) '\ 167 BEGIN { nonempty = 0; } \ 168 { items[$$0] = 1; nonempty = 1; } \ 169 END { if (nonempty) { for (i in items) print i; }; } \ 170' 171# Make sure the list of sources is unique. This is necessary because, 172# e.g., the same source file might be shared among _SOURCES variables 173# for different programs/libraries. 174am__define_uniq_tagged_files = \ 175 list='$(am__tagged_files)'; \ 176 unique=`for i in $$list; do \ 177 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 178 done | $(am__uniquify_input)` 179ETAGS = etags 180CTAGS = ctags 181CSCOPE = cscope 182DIST_SUBDIRS = $(SUBDIRS) 183am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in COPYING \ 184 ChangeLog INSTALL README compile config.guess config.sub \ 185 install-sh ltmain.sh missing 186DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 187distdir = $(PACKAGE)-$(VERSION) 188top_distdir = $(distdir) 189am__remove_distdir = \ 190 if test -d "$(distdir)"; then \ 191 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 192 && rm -rf "$(distdir)" \ 193 || { sleep 5 && rm -rf "$(distdir)"; }; \ 194 else :; fi 195am__post_remove_distdir = $(am__remove_distdir) 196am__relativize = \ 197 dir0=`pwd`; \ 198 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 199 sed_rest='s,^[^/]*/*,,'; \ 200 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 201 sed_butlast='s,/*[^/]*$$,,'; \ 202 while test -n "$$dir1"; do \ 203 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 204 if test "$$first" != "."; then \ 205 if test "$$first" = ".."; then \ 206 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 207 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 208 else \ 209 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 210 if test "$$first2" = "$$first"; then \ 211 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 212 else \ 213 dir2="../$$dir2"; \ 214 fi; \ 215 dir0="$$dir0"/"$$first"; \ 216 fi; \ 217 fi; \ 218 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 219 done; \ 220 reldir="$$dir2" 221DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 222GZIP_ENV = --best 223DIST_TARGETS = dist-bzip2 dist-gzip 224distuninstallcheck_listfiles = find . -type f -print 225am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 226 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 227distcleancheck_listfiles = find . -type f -print 228ACLOCAL = @ACLOCAL@ 229ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ 230ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ 231AMTAR = @AMTAR@ 232AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 233APP_MAN_DIR = @APP_MAN_DIR@ 234APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ 235AR = @AR@ 236AUTOCONF = @AUTOCONF@ 237AUTOHEADER = @AUTOHEADER@ 238AUTOMAKE = @AUTOMAKE@ 239AWK = @AWK@ 240BASE_CFLAGS = @BASE_CFLAGS@ 241CC = @CC@ 242CCDEPMODE = @CCDEPMODE@ 243CFLAGS = @CFLAGS@ 244CHANGELOG_CMD = @CHANGELOG_CMD@ 245CPP = @CPP@ 246CPPFLAGS = @CPPFLAGS@ 247CWARNFLAGS = @CWARNFLAGS@ 248CYGPATH_W = @CYGPATH_W@ 249DEFS = @DEFS@ 250DEPDIR = @DEPDIR@ 251DLLTOOL = @DLLTOOL@ 252DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ 253DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ 254DRIVER_NAME = @DRIVER_NAME@ 255DSYMUTIL = @DSYMUTIL@ 256DUMPBIN = @DUMPBIN@ 257ECHO_C = @ECHO_C@ 258ECHO_N = @ECHO_N@ 259ECHO_T = @ECHO_T@ 260EGREP = @EGREP@ 261EXEEXT = @EXEEXT@ 262FGREP = @FGREP@ 263FILE_MAN_DIR = @FILE_MAN_DIR@ 264FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ 265GBM_CFLAGS = @GBM_CFLAGS@ 266GBM_LIBS = @GBM_LIBS@ 267GREP = @GREP@ 268INSTALL = @INSTALL@ 269INSTALL_CMD = @INSTALL_CMD@ 270INSTALL_DATA = @INSTALL_DATA@ 271INSTALL_PROGRAM = @INSTALL_PROGRAM@ 272INSTALL_SCRIPT = @INSTALL_SCRIPT@ 273INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 274LD = @LD@ 275LDFLAGS = @LDFLAGS@ 276LIBDRM_AMDGPU_CFLAGS = @LIBDRM_AMDGPU_CFLAGS@ 277LIBDRM_AMDGPU_LIBS = @LIBDRM_AMDGPU_LIBS@ 278LIBDRM_CFLAGS = @LIBDRM_CFLAGS@ 279LIBDRM_LIBS = @LIBDRM_LIBS@ 280LIBGLAMOR_CFLAGS = @LIBGLAMOR_CFLAGS@ 281LIBGLAMOR_EGL_CFLAGS = @LIBGLAMOR_EGL_CFLAGS@ 282LIBGLAMOR_EGL_LIBS = @LIBGLAMOR_EGL_LIBS@ 283LIBGLAMOR_LIBS = @LIBGLAMOR_LIBS@ 284LIBGL_CFLAGS = @LIBGL_CFLAGS@ 285LIBGL_LIBS = @LIBGL_LIBS@ 286LIBOBJS = @LIBOBJS@ 287LIBS = @LIBS@ 288LIBTOOL = @LIBTOOL@ 289LIBUDEV_CFLAGS = @LIBUDEV_CFLAGS@ 290LIBUDEV_LIBS = @LIBUDEV_LIBS@ 291LIB_MAN_DIR = @LIB_MAN_DIR@ 292LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ 293LIPO = @LIPO@ 294LN_S = @LN_S@ 295LTLIBOBJS = @LTLIBOBJS@ 296LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ 297MAKEINFO = @MAKEINFO@ 298MANIFEST_TOOL = @MANIFEST_TOOL@ 299MAN_SUBSTS = @MAN_SUBSTS@ 300MISC_MAN_DIR = @MISC_MAN_DIR@ 301MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ 302MKDIR_P = @MKDIR_P@ 303NM = @NM@ 304NMEDIT = @NMEDIT@ 305OBJDUMP = @OBJDUMP@ 306OBJEXT = @OBJEXT@ 307OTOOL = @OTOOL@ 308OTOOL64 = @OTOOL64@ 309PACKAGE = @PACKAGE@ 310PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 311PACKAGE_NAME = @PACKAGE_NAME@ 312PACKAGE_STRING = @PACKAGE_STRING@ 313PACKAGE_TARNAME = @PACKAGE_TARNAME@ 314PACKAGE_URL = @PACKAGE_URL@ 315PACKAGE_VERSION = @PACKAGE_VERSION@ 316PATH_SEPARATOR = @PATH_SEPARATOR@ 317PKG_CONFIG = @PKG_CONFIG@ 318PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ 319PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ 320RANLIB = @RANLIB@ 321SED = @SED@ 322SET_MAKE = @SET_MAKE@ 323SHELL = @SHELL@ 324STRICT_CFLAGS = @STRICT_CFLAGS@ 325STRIP = @STRIP@ 326VERSION = @VERSION@ 327XEXT_CFLAGS = @XEXT_CFLAGS@ 328XEXT_LIBS = @XEXT_LIBS@ 329XORG_CFLAGS = @XORG_CFLAGS@ 330XORG_LIBS = @XORG_LIBS@ 331XORG_MAN_PAGE = @XORG_MAN_PAGE@ 332abs_builddir = @abs_builddir@ 333abs_srcdir = @abs_srcdir@ 334abs_top_builddir = @abs_top_builddir@ 335abs_top_srcdir = @abs_top_srcdir@ 336ac_ct_AR = @ac_ct_AR@ 337ac_ct_CC = @ac_ct_CC@ 338ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 339am__include = @am__include@ 340am__leading_dot = @am__leading_dot@ 341am__quote = @am__quote@ 342am__tar = @am__tar@ 343am__untar = @am__untar@ 344bindir = @bindir@ 345build = @build@ 346build_alias = @build_alias@ 347build_cpu = @build_cpu@ 348build_os = @build_os@ 349build_vendor = @build_vendor@ 350builddir = @builddir@ 351configdir = @configdir@ 352datadir = @datadir@ 353datarootdir = @datarootdir@ 354docdir = @docdir@ 355dvidir = @dvidir@ 356exec_prefix = @exec_prefix@ 357host = @host@ 358host_alias = @host_alias@ 359host_cpu = @host_cpu@ 360host_os = @host_os@ 361host_vendor = @host_vendor@ 362htmldir = @htmldir@ 363includedir = @includedir@ 364infodir = @infodir@ 365install_sh = @install_sh@ 366libdir = @libdir@ 367libexecdir = @libexecdir@ 368localedir = @localedir@ 369localstatedir = @localstatedir@ 370mandir = @mandir@ 371mkdir_p = @mkdir_p@ 372moduledir = @moduledir@ 373oldincludedir = @oldincludedir@ 374pdfdir = @pdfdir@ 375prefix = @prefix@ 376program_transform_name = @program_transform_name@ 377psdir = @psdir@ 378runstatedir = @runstatedir@ 379sbindir = @sbindir@ 380sharedstatedir = @sharedstatedir@ 381srcdir = @srcdir@ 382sysconfdir = @sysconfdir@ 383target_alias = @target_alias@ 384top_build_prefix = @top_build_prefix@ 385top_builddir = @top_builddir@ 386top_srcdir = @top_srcdir@ 387SUBDIRS = src man conf 388MAINTAINERCLEANFILES = ChangeLog INSTALL 389ACLOCAL_AMFLAGS = -I m4 390EXTRA_DIST = ChangeLog INSTALL 391all: config.h 392 $(MAKE) $(AM_MAKEFLAGS) all-recursive 393 394.SUFFIXES: 395am--refresh: Makefile 396 @: 397$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 398 @for dep in $?; do \ 399 case '$(am__configure_deps)' in \ 400 *$$dep*) \ 401 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 402 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 403 && exit 0; \ 404 exit 1;; \ 405 esac; \ 406 done; \ 407 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 408 $(am__cd) $(top_srcdir) && \ 409 $(AUTOMAKE) --foreign Makefile 410Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 411 @case '$?' in \ 412 *config.status*) \ 413 echo ' $(SHELL) ./config.status'; \ 414 $(SHELL) ./config.status;; \ 415 *) \ 416 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ 417 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ 418 esac; 419 420$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 421 $(SHELL) ./config.status --recheck 422 423$(top_srcdir)/configure: $(am__configure_deps) 424 $(am__cd) $(srcdir) && $(AUTOCONF) 425$(ACLOCAL_M4): $(am__aclocal_m4_deps) 426 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 427$(am__aclocal_m4_deps): 428 429config.h: stamp-h1 430 @test -f $@ || rm -f stamp-h1 431 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 432 433stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 434 @rm -f stamp-h1 435 cd $(top_builddir) && $(SHELL) ./config.status config.h 436$(srcdir)/config.h.in: $(am__configure_deps) 437 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 438 rm -f stamp-h1 439 touch $@ 440 441distclean-hdr: 442 -rm -f config.h stamp-h1 443 444mostlyclean-libtool: 445 -rm -f *.lo 446 447clean-libtool: 448 -rm -rf .libs _libs 449 450distclean-libtool: 451 -rm -f libtool config.lt 452 453# This directory's subdirectories are mostly independent; you can cd 454# into them and run 'make' without going through this Makefile. 455# To change the values of 'make' variables: instead of editing Makefiles, 456# (1) if the variable is set in 'config.status', edit 'config.status' 457# (which will cause the Makefiles to be regenerated when you run 'make'); 458# (2) otherwise, pass the desired values on the 'make' command line. 459$(am__recursive_targets): 460 @fail=; \ 461 if $(am__make_keepgoing); then \ 462 failcom='fail=yes'; \ 463 else \ 464 failcom='exit 1'; \ 465 fi; \ 466 dot_seen=no; \ 467 target=`echo $@ | sed s/-recursive//`; \ 468 case "$@" in \ 469 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 470 *) list='$(SUBDIRS)' ;; \ 471 esac; \ 472 for subdir in $$list; do \ 473 echo "Making $$target in $$subdir"; \ 474 if test "$$subdir" = "."; then \ 475 dot_seen=yes; \ 476 local_target="$$target-am"; \ 477 else \ 478 local_target="$$target"; \ 479 fi; \ 480 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 481 || eval $$failcom; \ 482 done; \ 483 if test "$$dot_seen" = "no"; then \ 484 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 485 fi; test -z "$$fail" 486 487ID: $(am__tagged_files) 488 $(am__define_uniq_tagged_files); mkid -fID $$unique 489tags: tags-recursive 490TAGS: tags 491 492tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 493 set x; \ 494 here=`pwd`; \ 495 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 496 include_option=--etags-include; \ 497 empty_fix=.; \ 498 else \ 499 include_option=--include; \ 500 empty_fix=; \ 501 fi; \ 502 list='$(SUBDIRS)'; for subdir in $$list; do \ 503 if test "$$subdir" = .; then :; else \ 504 test ! -f $$subdir/TAGS || \ 505 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 506 fi; \ 507 done; \ 508 $(am__define_uniq_tagged_files); \ 509 shift; \ 510 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 511 test -n "$$unique" || unique=$$empty_fix; \ 512 if test $$# -gt 0; then \ 513 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 514 "$$@" $$unique; \ 515 else \ 516 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 517 $$unique; \ 518 fi; \ 519 fi 520ctags: ctags-recursive 521 522CTAGS: ctags 523ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 524 $(am__define_uniq_tagged_files); \ 525 test -z "$(CTAGS_ARGS)$$unique" \ 526 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 527 $$unique 528 529GTAGS: 530 here=`$(am__cd) $(top_builddir) && pwd` \ 531 && $(am__cd) $(top_srcdir) \ 532 && gtags -i $(GTAGS_ARGS) "$$here" 533cscope: cscope.files 534 test ! -s cscope.files \ 535 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 536clean-cscope: 537 -rm -f cscope.files 538cscope.files: clean-cscope cscopelist 539cscopelist: cscopelist-recursive 540 541cscopelist-am: $(am__tagged_files) 542 list='$(am__tagged_files)'; \ 543 case "$(srcdir)" in \ 544 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 545 *) sdir=$(subdir)/$(srcdir) ;; \ 546 esac; \ 547 for i in $$list; do \ 548 if test -f "$$i"; then \ 549 echo "$(subdir)/$$i"; \ 550 else \ 551 echo "$$sdir/$$i"; \ 552 fi; \ 553 done >> $(top_builddir)/cscope.files 554 555distclean-tags: 556 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 557 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 558 559distdir: $(DISTFILES) 560 $(am__remove_distdir) 561 test -d "$(distdir)" || mkdir "$(distdir)" 562 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 563 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 564 list='$(DISTFILES)'; \ 565 dist_files=`for file in $$list; do echo $$file; done | \ 566 sed -e "s|^$$srcdirstrip/||;t" \ 567 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 568 case $$dist_files in \ 569 */*) $(MKDIR_P) `echo "$$dist_files" | \ 570 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 571 sort -u` ;; \ 572 esac; \ 573 for file in $$dist_files; do \ 574 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 575 if test -d $$d/$$file; then \ 576 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 577 if test -d "$(distdir)/$$file"; then \ 578 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 579 fi; \ 580 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 581 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 582 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 583 fi; \ 584 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 585 else \ 586 test -f "$(distdir)/$$file" \ 587 || cp -p $$d/$$file "$(distdir)/$$file" \ 588 || exit 1; \ 589 fi; \ 590 done 591 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 592 if test "$$subdir" = .; then :; else \ 593 $(am__make_dryrun) \ 594 || test -d "$(distdir)/$$subdir" \ 595 || $(MKDIR_P) "$(distdir)/$$subdir" \ 596 || exit 1; \ 597 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 598 $(am__relativize); \ 599 new_distdir=$$reldir; \ 600 dir1=$$subdir; dir2="$(top_distdir)"; \ 601 $(am__relativize); \ 602 new_top_distdir=$$reldir; \ 603 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 604 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 605 ($(am__cd) $$subdir && \ 606 $(MAKE) $(AM_MAKEFLAGS) \ 607 top_distdir="$$new_top_distdir" \ 608 distdir="$$new_distdir" \ 609 am__remove_distdir=: \ 610 am__skip_length_check=: \ 611 am__skip_mode_fix=: \ 612 distdir) \ 613 || exit 1; \ 614 fi; \ 615 done 616 -test -n "$(am__skip_mode_fix)" \ 617 || find "$(distdir)" -type d ! -perm -755 \ 618 -exec chmod u+rwx,go+rx {} \; -o \ 619 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 620 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 621 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 622 || chmod -R a+r "$(distdir)" 623dist-gzip: distdir 624 tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz 625 $(am__post_remove_distdir) 626dist-bzip2: distdir 627 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 628 $(am__post_remove_distdir) 629 630dist-lzip: distdir 631 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 632 $(am__post_remove_distdir) 633 634dist-xz: distdir 635 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 636 $(am__post_remove_distdir) 637 638dist-tarZ: distdir 639 @echo WARNING: "Support for distribution archives compressed with" \ 640 "legacy program 'compress' is deprecated." >&2 641 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 642 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 643 $(am__post_remove_distdir) 644 645dist-shar: distdir 646 @echo WARNING: "Support for shar distribution archives is" \ 647 "deprecated." >&2 648 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 649 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz 650 $(am__post_remove_distdir) 651 652dist-zip: distdir 653 -rm -f $(distdir).zip 654 zip -rq $(distdir).zip $(distdir) 655 $(am__post_remove_distdir) 656 657dist dist-all: 658 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 659 $(am__post_remove_distdir) 660 661# This target untars the dist file and tries a VPATH configuration. Then 662# it guarantees that the distribution is self-contained by making another 663# tarfile. 664distcheck: dist 665 case '$(DIST_ARCHIVES)' in \ 666 *.tar.gz*) \ 667 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ 668 *.tar.bz2*) \ 669 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 670 *.tar.lz*) \ 671 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 672 *.tar.xz*) \ 673 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 674 *.tar.Z*) \ 675 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 676 *.shar.gz*) \ 677 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ 678 *.zip*) \ 679 unzip $(distdir).zip ;;\ 680 esac 681 chmod -R a-w $(distdir) 682 chmod u+w $(distdir) 683 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst 684 chmod a-w $(distdir) 685 test -d $(distdir)/_build || exit 0; \ 686 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 687 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 688 && am__cwd=`pwd` \ 689 && $(am__cd) $(distdir)/_build/sub \ 690 && ../../configure \ 691 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 692 $(DISTCHECK_CONFIGURE_FLAGS) \ 693 --srcdir=../.. --prefix="$$dc_install_base" \ 694 && $(MAKE) $(AM_MAKEFLAGS) \ 695 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 696 && $(MAKE) $(AM_MAKEFLAGS) check \ 697 && $(MAKE) $(AM_MAKEFLAGS) install \ 698 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 699 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 700 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 701 distuninstallcheck \ 702 && chmod -R a-w "$$dc_install_base" \ 703 && ({ \ 704 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 705 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 706 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 707 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 708 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 709 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 710 && rm -rf "$$dc_destdir" \ 711 && $(MAKE) $(AM_MAKEFLAGS) dist \ 712 && rm -rf $(DIST_ARCHIVES) \ 713 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 714 && cd "$$am__cwd" \ 715 || exit 1 716 $(am__post_remove_distdir) 717 @(echo "$(distdir) archives ready for distribution: "; \ 718 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 719 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 720distuninstallcheck: 721 @test -n '$(distuninstallcheck_dir)' || { \ 722 echo 'ERROR: trying to run $@ with an empty' \ 723 '$$(distuninstallcheck_dir)' >&2; \ 724 exit 1; \ 725 }; \ 726 $(am__cd) '$(distuninstallcheck_dir)' || { \ 727 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 728 exit 1; \ 729 }; \ 730 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 731 || { echo "ERROR: files left after uninstall:" ; \ 732 if test -n "$(DESTDIR)"; then \ 733 echo " (check DESTDIR support)"; \ 734 fi ; \ 735 $(distuninstallcheck_listfiles) ; \ 736 exit 1; } >&2 737distcleancheck: distclean 738 @if test '$(srcdir)' = . ; then \ 739 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 740 exit 1 ; \ 741 fi 742 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 743 || { echo "ERROR: files left in build directory after distclean:" ; \ 744 $(distcleancheck_listfiles) ; \ 745 exit 1; } >&2 746check-am: all-am 747check: check-recursive 748all-am: Makefile config.h 749installdirs: installdirs-recursive 750installdirs-am: 751install: install-recursive 752install-exec: install-exec-recursive 753install-data: install-data-recursive 754uninstall: uninstall-recursive 755 756install-am: all-am 757 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 758 759installcheck: installcheck-recursive 760install-strip: 761 if test -z '$(STRIP)'; then \ 762 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 763 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 764 install; \ 765 else \ 766 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 767 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 768 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 769 fi 770mostlyclean-generic: 771 772clean-generic: 773 774distclean-generic: 775 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 776 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 777 778maintainer-clean-generic: 779 @echo "This command is intended for maintainers to use" 780 @echo "it deletes files that may require special tools to rebuild." 781 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 782clean: clean-recursive 783 784clean-am: clean-generic clean-libtool mostlyclean-am 785 786distclean: distclean-recursive 787 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 788 -rm -f Makefile 789distclean-am: clean-am distclean-generic distclean-hdr \ 790 distclean-libtool distclean-tags 791 792dvi: dvi-recursive 793 794dvi-am: 795 796html: html-recursive 797 798html-am: 799 800info: info-recursive 801 802info-am: 803 804install-data-am: 805 806install-dvi: install-dvi-recursive 807 808install-dvi-am: 809 810install-exec-am: 811 812install-html: install-html-recursive 813 814install-html-am: 815 816install-info: install-info-recursive 817 818install-info-am: 819 820install-man: 821 822install-pdf: install-pdf-recursive 823 824install-pdf-am: 825 826install-ps: install-ps-recursive 827 828install-ps-am: 829 830installcheck-am: 831 832maintainer-clean: maintainer-clean-recursive 833 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 834 -rm -rf $(top_srcdir)/autom4te.cache 835 -rm -f Makefile 836maintainer-clean-am: distclean-am maintainer-clean-generic 837 838mostlyclean: mostlyclean-recursive 839 840mostlyclean-am: mostlyclean-generic mostlyclean-libtool 841 842pdf: pdf-recursive 843 844pdf-am: 845 846ps: ps-recursive 847 848ps-am: 849 850uninstall-am: 851 852.MAKE: $(am__recursive_targets) all install-am install-strip 853 854.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 855 am--refresh check check-am clean clean-cscope clean-generic \ 856 clean-libtool cscope cscopelist-am ctags ctags-am dist \ 857 dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \ 858 dist-xz dist-zip distcheck distclean distclean-generic \ 859 distclean-hdr distclean-libtool distclean-tags distcleancheck \ 860 distdir distuninstallcheck dvi dvi-am html html-am info \ 861 info-am install install-am install-data install-data-am \ 862 install-dvi install-dvi-am install-exec install-exec-am \ 863 install-html install-html-am install-info install-info-am \ 864 install-man install-pdf install-pdf-am install-ps \ 865 install-ps-am install-strip installcheck installcheck-am \ 866 installdirs installdirs-am maintainer-clean \ 867 maintainer-clean-generic mostlyclean mostlyclean-generic \ 868 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ 869 uninstall-am 870 871.PRECIOUS: Makefile 872 873 874.PHONY: ChangeLog INSTALL 875 876INSTALL: 877 $(INSTALL_CMD) 878 879ChangeLog: 880 $(CHANGELOG_CMD) 881 882# Tell versions [3.59,3.63) of GNU make to not export all variables. 883# Otherwise a system limit (for SysV at least) may be exceeded. 884.NOEXPORT: 885