Makefile.in revision 46845023
1# Makefile.in generated by automake 1.16.2 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2020 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# Copyright 2005 Adam Jackson. 18# 19# Permission is hereby granted, free of charge, to any person obtaining a 20# copy of this software and associated documentation files (the "Software"), 21# to deal in the Software without restriction, including without limitation 22# on the rights to use, copy, modify, merge, publish, distribute, sub 23# license, and/or sell copies of the Software, and to permit persons to whom 24# the Software is furnished to do so, subject to the following conditions: 25# 26# The above copyright notice and this permission notice (including the next 27# paragraph) shall be included in all copies or substantial portions of the 28# Software. 29# 30# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 31# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 32# FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL 33# ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER 34# IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 35# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 36VPATH = @srcdir@ 37am__is_gnu_make = { \ 38 if test -z '$(MAKELEVEL)'; then \ 39 false; \ 40 elif test -n '$(MAKE_HOST)'; then \ 41 true; \ 42 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ 43 true; \ 44 else \ 45 false; \ 46 fi; \ 47} 48am__make_running_with_option = \ 49 case $${target_option-} in \ 50 ?) ;; \ 51 *) echo "am__make_running_with_option: internal error: invalid" \ 52 "target option '$${target_option-}' specified" >&2; \ 53 exit 1;; \ 54 esac; \ 55 has_opt=no; \ 56 sane_makeflags=$$MAKEFLAGS; \ 57 if $(am__is_gnu_make); then \ 58 sane_makeflags=$$MFLAGS; \ 59 else \ 60 case $$MAKEFLAGS in \ 61 *\\[\ \ ]*) \ 62 bs=\\; \ 63 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 64 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 65 esac; \ 66 fi; \ 67 skip_next=no; \ 68 strip_trailopt () \ 69 { \ 70 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 71 }; \ 72 for flg in $$sane_makeflags; do \ 73 test $$skip_next = yes && { skip_next=no; continue; }; \ 74 case $$flg in \ 75 *=*|--*) continue;; \ 76 -*I) strip_trailopt 'I'; skip_next=yes;; \ 77 -*I?*) strip_trailopt 'I';; \ 78 -*O) strip_trailopt 'O'; skip_next=yes;; \ 79 -*O?*) strip_trailopt 'O';; \ 80 -*l) strip_trailopt 'l'; skip_next=yes;; \ 81 -*l?*) strip_trailopt 'l';; \ 82 -[dEDm]) skip_next=yes;; \ 83 -[JT]) skip_next=yes;; \ 84 esac; \ 85 case $$flg in \ 86 *$$target_option*) has_opt=yes; break;; \ 87 esac; \ 88 done; \ 89 test $$has_opt = yes 90am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 91am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 92pkgdatadir = $(datadir)/@PACKAGE@ 93pkgincludedir = $(includedir)/@PACKAGE@ 94pkglibdir = $(libdir)/@PACKAGE@ 95pkglibexecdir = $(libexecdir)/@PACKAGE@ 96am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 97install_sh_DATA = $(install_sh) -c -m 644 98install_sh_PROGRAM = $(install_sh) -c 99install_sh_SCRIPT = $(install_sh) -c 100INSTALL_HEADER = $(INSTALL_DATA) 101transform = $(program_transform_name) 102NORMAL_INSTALL = : 103PRE_INSTALL = : 104POST_INSTALL = : 105NORMAL_UNINSTALL = : 106PRE_UNINSTALL = : 107POST_UNINSTALL = : 108build_triplet = @build@ 109host_triplet = @host@ 110subdir = . 111ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 112am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ 113 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ 114 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ 115 $(top_srcdir)/configure.ac 116am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 117 $(ACLOCAL_M4) 118DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ 119 $(am__configure_deps) $(am__DIST_COMMON) 120am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 121 configure.lineno config.status.lineno 122mkinstalldirs = $(install_sh) -d 123CONFIG_HEADER = config.h 124CONFIG_CLEAN_FILES = 125CONFIG_CLEAN_VPATH_FILES = 126AM_V_P = $(am__v_P_@AM_V@) 127am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 128am__v_P_0 = false 129am__v_P_1 = : 130AM_V_GEN = $(am__v_GEN_@AM_V@) 131am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 132am__v_GEN_0 = @echo " GEN " $@; 133am__v_GEN_1 = 134AM_V_at = $(am__v_at_@AM_V@) 135am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 136am__v_at_0 = @ 137am__v_at_1 = 138SOURCES = 139DIST_SOURCES = 140RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 141 ctags-recursive dvi-recursive html-recursive info-recursive \ 142 install-data-recursive install-dvi-recursive \ 143 install-exec-recursive install-html-recursive \ 144 install-info-recursive install-pdf-recursive \ 145 install-ps-recursive install-recursive installcheck-recursive \ 146 installdirs-recursive pdf-recursive ps-recursive \ 147 tags-recursive uninstall-recursive 148am__can_run_installinfo = \ 149 case $$AM_UPDATE_INFO_DIR in \ 150 n|no|NO) false;; \ 151 *) (install-info --version) >/dev/null 2>&1;; \ 152 esac 153RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 154 distclean-recursive maintainer-clean-recursive 155am__recursive_targets = \ 156 $(RECURSIVE_TARGETS) \ 157 $(RECURSIVE_CLEAN_TARGETS) \ 158 $(am__extra_recursive_targets) 159AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 160 cscope distdir distdir-am dist dist-all distcheck 161am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \ 162 config.h.in 163# Read a list of newline-separated strings from the standard input, 164# and print each of them once, without duplicates. Input order is 165# *not* preserved. 166am__uniquify_input = $(AWK) '\ 167 BEGIN { nonempty = 0; } \ 168 { items[$$0] = 1; nonempty = 1; } \ 169 END { if (nonempty) { for (i in items) print i; }; } \ 170' 171# Make sure the list of sources is unique. This is necessary because, 172# e.g., the same source file might be shared among _SOURCES variables 173# for different programs/libraries. 174am__define_uniq_tagged_files = \ 175 list='$(am__tagged_files)'; \ 176 unique=`for i in $$list; do \ 177 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 178 done | $(am__uniquify_input)` 179ETAGS = etags 180CTAGS = ctags 181CSCOPE = cscope 182DIST_SUBDIRS = $(SUBDIRS) 183am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in COPYING \ 184 ChangeLog INSTALL compile config.guess config.sub install-sh \ 185 ltmain.sh missing 186DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 187distdir = $(PACKAGE)-$(VERSION) 188top_distdir = $(distdir) 189am__remove_distdir = \ 190 if test -d "$(distdir)"; then \ 191 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 192 && rm -rf "$(distdir)" \ 193 || { sleep 5 && rm -rf "$(distdir)"; }; \ 194 else :; fi 195am__post_remove_distdir = $(am__remove_distdir) 196am__relativize = \ 197 dir0=`pwd`; \ 198 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 199 sed_rest='s,^[^/]*/*,,'; \ 200 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 201 sed_butlast='s,/*[^/]*$$,,'; \ 202 while test -n "$$dir1"; do \ 203 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 204 if test "$$first" != "."; then \ 205 if test "$$first" = ".."; then \ 206 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 207 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 208 else \ 209 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 210 if test "$$first2" = "$$first"; then \ 211 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 212 else \ 213 dir2="../$$dir2"; \ 214 fi; \ 215 dir0="$$dir0"/"$$first"; \ 216 fi; \ 217 fi; \ 218 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 219 done; \ 220 reldir="$$dir2" 221DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 222GZIP_ENV = --best 223DIST_TARGETS = dist-bzip2 dist-gzip 224distuninstallcheck_listfiles = find . -type f -print 225am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 226 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 227distcleancheck_listfiles = find . -type f -print 228ACLOCAL = @ACLOCAL@ 229ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ 230ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ 231AMTAR = @AMTAR@ 232AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 233APP_MAN_DIR = @APP_MAN_DIR@ 234APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ 235AR = @AR@ 236AUTOCONF = @AUTOCONF@ 237AUTOHEADER = @AUTOHEADER@ 238AUTOMAKE = @AUTOMAKE@ 239AWK = @AWK@ 240BASE_CFLAGS = @BASE_CFLAGS@ 241CC = @CC@ 242CCDEPMODE = @CCDEPMODE@ 243CFLAGS = @CFLAGS@ 244CHANGELOG_CMD = @CHANGELOG_CMD@ 245CPP = @CPP@ 246CPPFLAGS = @CPPFLAGS@ 247CWARNFLAGS = @CWARNFLAGS@ 248CYGPATH_W = @CYGPATH_W@ 249DEFS = @DEFS@ 250DEPDIR = @DEPDIR@ 251DLLTOOL = @DLLTOOL@ 252DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ 253DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ 254DRIVER_NAME = @DRIVER_NAME@ 255DSYMUTIL = @DSYMUTIL@ 256DUMPBIN = @DUMPBIN@ 257ECHO_C = @ECHO_C@ 258ECHO_N = @ECHO_N@ 259ECHO_T = @ECHO_T@ 260EGREP = @EGREP@ 261EXEEXT = @EXEEXT@ 262FGREP = @FGREP@ 263FILE_MAN_DIR = @FILE_MAN_DIR@ 264FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ 265GBM_CFLAGS = @GBM_CFLAGS@ 266GBM_LIBS = @GBM_LIBS@ 267GREP = @GREP@ 268INSTALL = @INSTALL@ 269INSTALL_CMD = @INSTALL_CMD@ 270INSTALL_DATA = @INSTALL_DATA@ 271INSTALL_PROGRAM = @INSTALL_PROGRAM@ 272INSTALL_SCRIPT = @INSTALL_SCRIPT@ 273INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 274LD = @LD@ 275LDFLAGS = @LDFLAGS@ 276LIBDRM_AMDGPU_CFLAGS = @LIBDRM_AMDGPU_CFLAGS@ 277LIBDRM_AMDGPU_LIBS = @LIBDRM_AMDGPU_LIBS@ 278LIBDRM_CFLAGS = @LIBDRM_CFLAGS@ 279LIBDRM_LIBS = @LIBDRM_LIBS@ 280LIBGLAMOR_CFLAGS = @LIBGLAMOR_CFLAGS@ 281LIBGLAMOR_EGL_CFLAGS = @LIBGLAMOR_EGL_CFLAGS@ 282LIBGLAMOR_EGL_LIBS = @LIBGLAMOR_EGL_LIBS@ 283LIBGLAMOR_LIBS = @LIBGLAMOR_LIBS@ 284LIBGL_CFLAGS = @LIBGL_CFLAGS@ 285LIBGL_LIBS = @LIBGL_LIBS@ 286LIBOBJS = @LIBOBJS@ 287LIBS = @LIBS@ 288LIBTOOL = @LIBTOOL@ 289LIBUDEV_CFLAGS = @LIBUDEV_CFLAGS@ 290LIBUDEV_LIBS = @LIBUDEV_LIBS@ 291LIB_MAN_DIR = @LIB_MAN_DIR@ 292LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ 293LIPO = @LIPO@ 294LN_S = @LN_S@ 295LTLIBOBJS = @LTLIBOBJS@ 296LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ 297MAKEINFO = @MAKEINFO@ 298MANIFEST_TOOL = @MANIFEST_TOOL@ 299MAN_SUBSTS = @MAN_SUBSTS@ 300MISC_MAN_DIR = @MISC_MAN_DIR@ 301MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ 302MKDIR_P = @MKDIR_P@ 303NM = @NM@ 304NMEDIT = @NMEDIT@ 305OBJDUMP = @OBJDUMP@ 306OBJEXT = @OBJEXT@ 307OTOOL = @OTOOL@ 308OTOOL64 = @OTOOL64@ 309PACKAGE = @PACKAGE@ 310PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 311PACKAGE_NAME = @PACKAGE_NAME@ 312PACKAGE_STRING = @PACKAGE_STRING@ 313PACKAGE_TARNAME = @PACKAGE_TARNAME@ 314PACKAGE_URL = @PACKAGE_URL@ 315PACKAGE_VERSION = @PACKAGE_VERSION@ 316PATH_SEPARATOR = @PATH_SEPARATOR@ 317PKG_CONFIG = @PKG_CONFIG@ 318PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ 319PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ 320RANLIB = @RANLIB@ 321SED = @SED@ 322SET_MAKE = @SET_MAKE@ 323SHELL = @SHELL@ 324STRICT_CFLAGS = @STRICT_CFLAGS@ 325STRIP = @STRIP@ 326VERSION = @VERSION@ 327XEXT_CFLAGS = @XEXT_CFLAGS@ 328XEXT_LIBS = @XEXT_LIBS@ 329XORG_CFLAGS = @XORG_CFLAGS@ 330XORG_LIBS = @XORG_LIBS@ 331XORG_MAN_PAGE = @XORG_MAN_PAGE@ 332abs_builddir = @abs_builddir@ 333abs_srcdir = @abs_srcdir@ 334abs_top_builddir = @abs_top_builddir@ 335abs_top_srcdir = @abs_top_srcdir@ 336ac_ct_AR = @ac_ct_AR@ 337ac_ct_CC = @ac_ct_CC@ 338ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 339am__include = @am__include@ 340am__leading_dot = @am__leading_dot@ 341am__quote = @am__quote@ 342am__tar = @am__tar@ 343am__untar = @am__untar@ 344bindir = @bindir@ 345build = @build@ 346build_alias = @build_alias@ 347build_cpu = @build_cpu@ 348build_os = @build_os@ 349build_vendor = @build_vendor@ 350builddir = @builddir@ 351configdir = @configdir@ 352datadir = @datadir@ 353datarootdir = @datarootdir@ 354docdir = @docdir@ 355dvidir = @dvidir@ 356exec_prefix = @exec_prefix@ 357host = @host@ 358host_alias = @host_alias@ 359host_cpu = @host_cpu@ 360host_os = @host_os@ 361host_vendor = @host_vendor@ 362htmldir = @htmldir@ 363includedir = @includedir@ 364infodir = @infodir@ 365install_sh = @install_sh@ 366libdir = @libdir@ 367libexecdir = @libexecdir@ 368localedir = @localedir@ 369localstatedir = @localstatedir@ 370mandir = @mandir@ 371mkdir_p = @mkdir_p@ 372moduledir = @moduledir@ 373oldincludedir = @oldincludedir@ 374pdfdir = @pdfdir@ 375prefix = @prefix@ 376program_transform_name = @program_transform_name@ 377psdir = @psdir@ 378sbindir = @sbindir@ 379sharedstatedir = @sharedstatedir@ 380srcdir = @srcdir@ 381sysconfdir = @sysconfdir@ 382target_alias = @target_alias@ 383top_build_prefix = @top_build_prefix@ 384top_builddir = @top_builddir@ 385top_srcdir = @top_srcdir@ 386SUBDIRS = src man conf 387MAINTAINERCLEANFILES = ChangeLog INSTALL 388ACLOCAL_AMFLAGS = -I m4 389EXTRA_DIST = ChangeLog INSTALL README.md 390all: config.h 391 $(MAKE) $(AM_MAKEFLAGS) all-recursive 392 393.SUFFIXES: 394am--refresh: Makefile 395 @: 396$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 397 @for dep in $?; do \ 398 case '$(am__configure_deps)' in \ 399 *$$dep*) \ 400 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 401 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 402 && exit 0; \ 403 exit 1;; \ 404 esac; \ 405 done; \ 406 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 407 $(am__cd) $(top_srcdir) && \ 408 $(AUTOMAKE) --foreign Makefile 409Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 410 @case '$?' in \ 411 *config.status*) \ 412 echo ' $(SHELL) ./config.status'; \ 413 $(SHELL) ./config.status;; \ 414 *) \ 415 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ 416 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ 417 esac; 418 419$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 420 $(SHELL) ./config.status --recheck 421 422$(top_srcdir)/configure: $(am__configure_deps) 423 $(am__cd) $(srcdir) && $(AUTOCONF) 424$(ACLOCAL_M4): $(am__aclocal_m4_deps) 425 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 426$(am__aclocal_m4_deps): 427 428config.h: stamp-h1 429 @test -f $@ || rm -f stamp-h1 430 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 431 432stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 433 @rm -f stamp-h1 434 cd $(top_builddir) && $(SHELL) ./config.status config.h 435$(srcdir)/config.h.in: $(am__configure_deps) 436 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 437 rm -f stamp-h1 438 touch $@ 439 440distclean-hdr: 441 -rm -f config.h stamp-h1 442 443mostlyclean-libtool: 444 -rm -f *.lo 445 446clean-libtool: 447 -rm -rf .libs _libs 448 449distclean-libtool: 450 -rm -f libtool config.lt 451 452# This directory's subdirectories are mostly independent; you can cd 453# into them and run 'make' without going through this Makefile. 454# To change the values of 'make' variables: instead of editing Makefiles, 455# (1) if the variable is set in 'config.status', edit 'config.status' 456# (which will cause the Makefiles to be regenerated when you run 'make'); 457# (2) otherwise, pass the desired values on the 'make' command line. 458$(am__recursive_targets): 459 @fail=; \ 460 if $(am__make_keepgoing); then \ 461 failcom='fail=yes'; \ 462 else \ 463 failcom='exit 1'; \ 464 fi; \ 465 dot_seen=no; \ 466 target=`echo $@ | sed s/-recursive//`; \ 467 case "$@" in \ 468 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 469 *) list='$(SUBDIRS)' ;; \ 470 esac; \ 471 for subdir in $$list; do \ 472 echo "Making $$target in $$subdir"; \ 473 if test "$$subdir" = "."; then \ 474 dot_seen=yes; \ 475 local_target="$$target-am"; \ 476 else \ 477 local_target="$$target"; \ 478 fi; \ 479 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 480 || eval $$failcom; \ 481 done; \ 482 if test "$$dot_seen" = "no"; then \ 483 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 484 fi; test -z "$$fail" 485 486ID: $(am__tagged_files) 487 $(am__define_uniq_tagged_files); mkid -fID $$unique 488tags: tags-recursive 489TAGS: tags 490 491tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 492 set x; \ 493 here=`pwd`; \ 494 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 495 include_option=--etags-include; \ 496 empty_fix=.; \ 497 else \ 498 include_option=--include; \ 499 empty_fix=; \ 500 fi; \ 501 list='$(SUBDIRS)'; for subdir in $$list; do \ 502 if test "$$subdir" = .; then :; else \ 503 test ! -f $$subdir/TAGS || \ 504 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 505 fi; \ 506 done; \ 507 $(am__define_uniq_tagged_files); \ 508 shift; \ 509 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 510 test -n "$$unique" || unique=$$empty_fix; \ 511 if test $$# -gt 0; then \ 512 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 513 "$$@" $$unique; \ 514 else \ 515 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 516 $$unique; \ 517 fi; \ 518 fi 519ctags: ctags-recursive 520 521CTAGS: ctags 522ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 523 $(am__define_uniq_tagged_files); \ 524 test -z "$(CTAGS_ARGS)$$unique" \ 525 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 526 $$unique 527 528GTAGS: 529 here=`$(am__cd) $(top_builddir) && pwd` \ 530 && $(am__cd) $(top_srcdir) \ 531 && gtags -i $(GTAGS_ARGS) "$$here" 532cscope: cscope.files 533 test ! -s cscope.files \ 534 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 535clean-cscope: 536 -rm -f cscope.files 537cscope.files: clean-cscope cscopelist 538cscopelist: cscopelist-recursive 539 540cscopelist-am: $(am__tagged_files) 541 list='$(am__tagged_files)'; \ 542 case "$(srcdir)" in \ 543 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 544 *) sdir=$(subdir)/$(srcdir) ;; \ 545 esac; \ 546 for i in $$list; do \ 547 if test -f "$$i"; then \ 548 echo "$(subdir)/$$i"; \ 549 else \ 550 echo "$$sdir/$$i"; \ 551 fi; \ 552 done >> $(top_builddir)/cscope.files 553 554distclean-tags: 555 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 556 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 557 558distdir: $(BUILT_SOURCES) 559 $(MAKE) $(AM_MAKEFLAGS) distdir-am 560 561distdir-am: $(DISTFILES) 562 $(am__remove_distdir) 563 test -d "$(distdir)" || mkdir "$(distdir)" 564 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 565 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 566 list='$(DISTFILES)'; \ 567 dist_files=`for file in $$list; do echo $$file; done | \ 568 sed -e "s|^$$srcdirstrip/||;t" \ 569 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 570 case $$dist_files in \ 571 */*) $(MKDIR_P) `echo "$$dist_files" | \ 572 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 573 sort -u` ;; \ 574 esac; \ 575 for file in $$dist_files; do \ 576 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 577 if test -d $$d/$$file; then \ 578 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 579 if test -d "$(distdir)/$$file"; then \ 580 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 581 fi; \ 582 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 583 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 584 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 585 fi; \ 586 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 587 else \ 588 test -f "$(distdir)/$$file" \ 589 || cp -p $$d/$$file "$(distdir)/$$file" \ 590 || exit 1; \ 591 fi; \ 592 done 593 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 594 if test "$$subdir" = .; then :; else \ 595 $(am__make_dryrun) \ 596 || test -d "$(distdir)/$$subdir" \ 597 || $(MKDIR_P) "$(distdir)/$$subdir" \ 598 || exit 1; \ 599 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 600 $(am__relativize); \ 601 new_distdir=$$reldir; \ 602 dir1=$$subdir; dir2="$(top_distdir)"; \ 603 $(am__relativize); \ 604 new_top_distdir=$$reldir; \ 605 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 606 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 607 ($(am__cd) $$subdir && \ 608 $(MAKE) $(AM_MAKEFLAGS) \ 609 top_distdir="$$new_top_distdir" \ 610 distdir="$$new_distdir" \ 611 am__remove_distdir=: \ 612 am__skip_length_check=: \ 613 am__skip_mode_fix=: \ 614 distdir) \ 615 || exit 1; \ 616 fi; \ 617 done 618 -test -n "$(am__skip_mode_fix)" \ 619 || find "$(distdir)" -type d ! -perm -755 \ 620 -exec chmod u+rwx,go+rx {} \; -o \ 621 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 622 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 623 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 624 || chmod -R a+r "$(distdir)" 625dist-gzip: distdir 626 tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz 627 $(am__post_remove_distdir) 628dist-bzip2: distdir 629 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 630 $(am__post_remove_distdir) 631 632dist-lzip: distdir 633 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 634 $(am__post_remove_distdir) 635 636dist-xz: distdir 637 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 638 $(am__post_remove_distdir) 639 640dist-zstd: distdir 641 tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst 642 $(am__post_remove_distdir) 643 644dist-tarZ: distdir 645 @echo WARNING: "Support for distribution archives compressed with" \ 646 "legacy program 'compress' is deprecated." >&2 647 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 648 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 649 $(am__post_remove_distdir) 650 651dist-shar: distdir 652 @echo WARNING: "Support for shar distribution archives is" \ 653 "deprecated." >&2 654 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 655 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz 656 $(am__post_remove_distdir) 657 658dist-zip: distdir 659 -rm -f $(distdir).zip 660 zip -rq $(distdir).zip $(distdir) 661 $(am__post_remove_distdir) 662 663dist dist-all: 664 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 665 $(am__post_remove_distdir) 666 667# This target untars the dist file and tries a VPATH configuration. Then 668# it guarantees that the distribution is self-contained by making another 669# tarfile. 670distcheck: dist 671 case '$(DIST_ARCHIVES)' in \ 672 *.tar.gz*) \ 673 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ 674 *.tar.bz2*) \ 675 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 676 *.tar.lz*) \ 677 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 678 *.tar.xz*) \ 679 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 680 *.tar.Z*) \ 681 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 682 *.shar.gz*) \ 683 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ 684 *.zip*) \ 685 unzip $(distdir).zip ;;\ 686 *.tar.zst*) \ 687 zstd -dc $(distdir).tar.zst | $(am__untar) ;;\ 688 esac 689 chmod -R a-w $(distdir) 690 chmod u+w $(distdir) 691 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst 692 chmod a-w $(distdir) 693 test -d $(distdir)/_build || exit 0; \ 694 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 695 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 696 && am__cwd=`pwd` \ 697 && $(am__cd) $(distdir)/_build/sub \ 698 && ../../configure \ 699 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 700 $(DISTCHECK_CONFIGURE_FLAGS) \ 701 --srcdir=../.. --prefix="$$dc_install_base" \ 702 && $(MAKE) $(AM_MAKEFLAGS) \ 703 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 704 && $(MAKE) $(AM_MAKEFLAGS) check \ 705 && $(MAKE) $(AM_MAKEFLAGS) install \ 706 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 707 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 708 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 709 distuninstallcheck \ 710 && chmod -R a-w "$$dc_install_base" \ 711 && ({ \ 712 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 713 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 714 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 715 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 716 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 717 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 718 && rm -rf "$$dc_destdir" \ 719 && $(MAKE) $(AM_MAKEFLAGS) dist \ 720 && rm -rf $(DIST_ARCHIVES) \ 721 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 722 && cd "$$am__cwd" \ 723 || exit 1 724 $(am__post_remove_distdir) 725 @(echo "$(distdir) archives ready for distribution: "; \ 726 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 727 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 728distuninstallcheck: 729 @test -n '$(distuninstallcheck_dir)' || { \ 730 echo 'ERROR: trying to run $@ with an empty' \ 731 '$$(distuninstallcheck_dir)' >&2; \ 732 exit 1; \ 733 }; \ 734 $(am__cd) '$(distuninstallcheck_dir)' || { \ 735 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 736 exit 1; \ 737 }; \ 738 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 739 || { echo "ERROR: files left after uninstall:" ; \ 740 if test -n "$(DESTDIR)"; then \ 741 echo " (check DESTDIR support)"; \ 742 fi ; \ 743 $(distuninstallcheck_listfiles) ; \ 744 exit 1; } >&2 745distcleancheck: distclean 746 @if test '$(srcdir)' = . ; then \ 747 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 748 exit 1 ; \ 749 fi 750 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 751 || { echo "ERROR: files left in build directory after distclean:" ; \ 752 $(distcleancheck_listfiles) ; \ 753 exit 1; } >&2 754check-am: all-am 755check: check-recursive 756all-am: Makefile config.h 757installdirs: installdirs-recursive 758installdirs-am: 759install: install-recursive 760install-exec: install-exec-recursive 761install-data: install-data-recursive 762uninstall: uninstall-recursive 763 764install-am: all-am 765 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 766 767installcheck: installcheck-recursive 768install-strip: 769 if test -z '$(STRIP)'; then \ 770 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 771 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 772 install; \ 773 else \ 774 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 775 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 776 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 777 fi 778mostlyclean-generic: 779 780clean-generic: 781 782distclean-generic: 783 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 784 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 785 786maintainer-clean-generic: 787 @echo "This command is intended for maintainers to use" 788 @echo "it deletes files that may require special tools to rebuild." 789 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 790clean: clean-recursive 791 792clean-am: clean-generic clean-libtool mostlyclean-am 793 794distclean: distclean-recursive 795 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 796 -rm -f Makefile 797distclean-am: clean-am distclean-generic distclean-hdr \ 798 distclean-libtool distclean-tags 799 800dvi: dvi-recursive 801 802dvi-am: 803 804html: html-recursive 805 806html-am: 807 808info: info-recursive 809 810info-am: 811 812install-data-am: 813 814install-dvi: install-dvi-recursive 815 816install-dvi-am: 817 818install-exec-am: 819 820install-html: install-html-recursive 821 822install-html-am: 823 824install-info: install-info-recursive 825 826install-info-am: 827 828install-man: 829 830install-pdf: install-pdf-recursive 831 832install-pdf-am: 833 834install-ps: install-ps-recursive 835 836install-ps-am: 837 838installcheck-am: 839 840maintainer-clean: maintainer-clean-recursive 841 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 842 -rm -rf $(top_srcdir)/autom4te.cache 843 -rm -f Makefile 844maintainer-clean-am: distclean-am maintainer-clean-generic 845 846mostlyclean: mostlyclean-recursive 847 848mostlyclean-am: mostlyclean-generic mostlyclean-libtool 849 850pdf: pdf-recursive 851 852pdf-am: 853 854ps: ps-recursive 855 856ps-am: 857 858uninstall-am: 859 860.MAKE: $(am__recursive_targets) all install-am install-strip 861 862.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 863 am--refresh check check-am clean clean-cscope clean-generic \ 864 clean-libtool cscope cscopelist-am ctags ctags-am dist \ 865 dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \ 866 dist-xz dist-zip dist-zstd distcheck distclean \ 867 distclean-generic distclean-hdr distclean-libtool \ 868 distclean-tags distcleancheck distdir distuninstallcheck dvi \ 869 dvi-am html html-am info info-am install install-am \ 870 install-data install-data-am install-dvi install-dvi-am \ 871 install-exec install-exec-am install-html install-html-am \ 872 install-info install-info-am install-man install-pdf \ 873 install-pdf-am install-ps install-ps-am install-strip \ 874 installcheck installcheck-am installdirs installdirs-am \ 875 maintainer-clean maintainer-clean-generic mostlyclean \ 876 mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ 877 tags tags-am uninstall uninstall-am 878 879.PRECIOUS: Makefile 880 881 882.PHONY: ChangeLog INSTALL 883 884INSTALL: 885 $(INSTALL_CMD) 886 887ChangeLog: 888 $(CHANGELOG_CMD) 889 890# Tell versions [3.59,3.63) of GNU make to not export all variables. 891# Otherwise a system limit (for SysV at least) may be exceeded. 892.NOEXPORT: 893