1# Makefile.in generated by automake 1.16.5 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2021 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17#  Copyright 2005 Adam Jackson.
18#
19#  Permission is hereby granted, free of charge, to any person obtaining a
20#  copy of this software and associated documentation files (the "Software"),
21#  to deal in the Software without restriction, including without limitation
22#  on the rights to use, copy, modify, merge, publish, distribute, sub
23#  license, and/or sell copies of the Software, and to permit persons to whom
24#  the Software is furnished to do so, subject to the following conditions:
25#
26#  The above copyright notice and this permission notice (including the next
27#  paragraph) shall be included in all copies or substantial portions of the
28#  Software.
29#
30#  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
31#  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
32#  FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.  IN NO EVENT SHALL
33#  ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
34#  IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
35#  CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
36VPATH = @srcdir@
37am__is_gnu_make = { \
38  if test -z '$(MAKELEVEL)'; then \
39    false; \
40  elif test -n '$(MAKE_HOST)'; then \
41    true; \
42  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
43    true; \
44  else \
45    false; \
46  fi; \
47}
48am__make_running_with_option = \
49  case $${target_option-} in \
50      ?) ;; \
51      *) echo "am__make_running_with_option: internal error: invalid" \
52              "target option '$${target_option-}' specified" >&2; \
53         exit 1;; \
54  esac; \
55  has_opt=no; \
56  sane_makeflags=$$MAKEFLAGS; \
57  if $(am__is_gnu_make); then \
58    sane_makeflags=$$MFLAGS; \
59  else \
60    case $$MAKEFLAGS in \
61      *\\[\ \	]*) \
62        bs=\\; \
63        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
64          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
65    esac; \
66  fi; \
67  skip_next=no; \
68  strip_trailopt () \
69  { \
70    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
71  }; \
72  for flg in $$sane_makeflags; do \
73    test $$skip_next = yes && { skip_next=no; continue; }; \
74    case $$flg in \
75      *=*|--*) continue;; \
76        -*I) strip_trailopt 'I'; skip_next=yes;; \
77      -*I?*) strip_trailopt 'I';; \
78        -*O) strip_trailopt 'O'; skip_next=yes;; \
79      -*O?*) strip_trailopt 'O';; \
80        -*l) strip_trailopt 'l'; skip_next=yes;; \
81      -*l?*) strip_trailopt 'l';; \
82      -[dEDm]) skip_next=yes;; \
83      -[JT]) skip_next=yes;; \
84    esac; \
85    case $$flg in \
86      *$$target_option*) has_opt=yes; break;; \
87    esac; \
88  done; \
89  test $$has_opt = yes
90am__make_dryrun = (target_option=n; $(am__make_running_with_option))
91am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
92pkgdatadir = $(datadir)/@PACKAGE@
93pkgincludedir = $(includedir)/@PACKAGE@
94pkglibdir = $(libdir)/@PACKAGE@
95pkglibexecdir = $(libexecdir)/@PACKAGE@
96am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
97install_sh_DATA = $(install_sh) -c -m 644
98install_sh_PROGRAM = $(install_sh) -c
99install_sh_SCRIPT = $(install_sh) -c
100INSTALL_HEADER = $(INSTALL_DATA)
101transform = $(program_transform_name)
102NORMAL_INSTALL = :
103PRE_INSTALL = :
104POST_INSTALL = :
105NORMAL_UNINSTALL = :
106PRE_UNINSTALL = :
107POST_UNINSTALL = :
108build_triplet = @build@
109host_triplet = @host@
110subdir = .
111ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
112am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
113	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
114	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
115	$(top_srcdir)/configure.ac
116am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
117	$(ACLOCAL_M4)
118DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
119	$(am__configure_deps) $(am__DIST_COMMON)
120am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
121 configure.lineno config.status.lineno
122mkinstalldirs = $(install_sh) -d
123CONFIG_HEADER = config.h
124CONFIG_CLEAN_FILES =
125CONFIG_CLEAN_VPATH_FILES =
126AM_V_P = $(am__v_P_@AM_V@)
127am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
128am__v_P_0 = false
129am__v_P_1 = :
130AM_V_GEN = $(am__v_GEN_@AM_V@)
131am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
132am__v_GEN_0 = @echo "  GEN     " $@;
133am__v_GEN_1 = 
134AM_V_at = $(am__v_at_@AM_V@)
135am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
136am__v_at_0 = @
137am__v_at_1 = 
138SOURCES =
139DIST_SOURCES =
140RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
141	ctags-recursive dvi-recursive html-recursive info-recursive \
142	install-data-recursive install-dvi-recursive \
143	install-exec-recursive install-html-recursive \
144	install-info-recursive install-pdf-recursive \
145	install-ps-recursive install-recursive installcheck-recursive \
146	installdirs-recursive pdf-recursive ps-recursive \
147	tags-recursive uninstall-recursive
148am__can_run_installinfo = \
149  case $$AM_UPDATE_INFO_DIR in \
150    n|no|NO) false;; \
151    *) (install-info --version) >/dev/null 2>&1;; \
152  esac
153RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
154  distclean-recursive maintainer-clean-recursive
155am__recursive_targets = \
156  $(RECURSIVE_TARGETS) \
157  $(RECURSIVE_CLEAN_TARGETS) \
158  $(am__extra_recursive_targets)
159AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
160	cscope distdir distdir-am dist dist-all distcheck
161am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
162	config.h.in
163# Read a list of newline-separated strings from the standard input,
164# and print each of them once, without duplicates.  Input order is
165# *not* preserved.
166am__uniquify_input = $(AWK) '\
167  BEGIN { nonempty = 0; } \
168  { items[$$0] = 1; nonempty = 1; } \
169  END { if (nonempty) { for (i in items) print i; }; } \
170'
171# Make sure the list of sources is unique.  This is necessary because,
172# e.g., the same source file might be shared among _SOURCES variables
173# for different programs/libraries.
174am__define_uniq_tagged_files = \
175  list='$(am__tagged_files)'; \
176  unique=`for i in $$list; do \
177    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
178  done | $(am__uniquify_input)`
179DIST_SUBDIRS = $(SUBDIRS)
180am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in COPYING \
181	ChangeLog INSTALL compile config.guess config.sub install-sh \
182	ltmain.sh missing
183DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
184distdir = $(PACKAGE)-$(VERSION)
185top_distdir = $(distdir)
186am__remove_distdir = \
187  if test -d "$(distdir)"; then \
188    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
189      && rm -rf "$(distdir)" \
190      || { sleep 5 && rm -rf "$(distdir)"; }; \
191  else :; fi
192am__post_remove_distdir = $(am__remove_distdir)
193am__relativize = \
194  dir0=`pwd`; \
195  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
196  sed_rest='s,^[^/]*/*,,'; \
197  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
198  sed_butlast='s,/*[^/]*$$,,'; \
199  while test -n "$$dir1"; do \
200    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
201    if test "$$first" != "."; then \
202      if test "$$first" = ".."; then \
203        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
204        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
205      else \
206        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
207        if test "$$first2" = "$$first"; then \
208          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
209        else \
210          dir2="../$$dir2"; \
211        fi; \
212        dir0="$$dir0"/"$$first"; \
213      fi; \
214    fi; \
215    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
216  done; \
217  reldir="$$dir2"
218DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
219GZIP_ENV = --best
220DIST_TARGETS = dist-xz dist-gzip
221# Exists only to be overridden by the user if desired.
222AM_DISTCHECK_DVI_TARGET = dvi
223distuninstallcheck_listfiles = find . -type f -print
224am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
225  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
226distcleancheck_listfiles = find . -type f -print
227ACLOCAL = @ACLOCAL@
228ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
229ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
230AMTAR = @AMTAR@
231AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
232APP_MAN_DIR = @APP_MAN_DIR@
233APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
234AR = @AR@
235AUTOCONF = @AUTOCONF@
236AUTOHEADER = @AUTOHEADER@
237AUTOMAKE = @AUTOMAKE@
238AWK = @AWK@
239BASE_CFLAGS = @BASE_CFLAGS@
240CC = @CC@
241CCDEPMODE = @CCDEPMODE@
242CFLAGS = @CFLAGS@
243CHANGELOG_CMD = @CHANGELOG_CMD@
244CPPFLAGS = @CPPFLAGS@
245CSCOPE = @CSCOPE@
246CTAGS = @CTAGS@
247CWARNFLAGS = @CWARNFLAGS@
248CYGPATH_W = @CYGPATH_W@
249DEFS = @DEFS@
250DEPDIR = @DEPDIR@
251DLLTOOL = @DLLTOOL@
252DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
253DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
254DRIVER_NAME = @DRIVER_NAME@
255DSYMUTIL = @DSYMUTIL@
256DUMPBIN = @DUMPBIN@
257ECHO_C = @ECHO_C@
258ECHO_N = @ECHO_N@
259ECHO_T = @ECHO_T@
260EGREP = @EGREP@
261ETAGS = @ETAGS@
262EXEEXT = @EXEEXT@
263FGREP = @FGREP@
264FILECMD = @FILECMD@
265FILE_MAN_DIR = @FILE_MAN_DIR@
266FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
267GREP = @GREP@
268INSTALL = @INSTALL@
269INSTALL_CMD = @INSTALL_CMD@
270INSTALL_DATA = @INSTALL_DATA@
271INSTALL_PROGRAM = @INSTALL_PROGRAM@
272INSTALL_SCRIPT = @INSTALL_SCRIPT@
273INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
274LD = @LD@
275LDFLAGS = @LDFLAGS@
276LIBDRM_CFLAGS = @LIBDRM_CFLAGS@
277LIBDRM_LIBS = @LIBDRM_LIBS@
278LIBDRM_NOUVEAU_CFLAGS = @LIBDRM_NOUVEAU_CFLAGS@
279LIBDRM_NOUVEAU_LIBS = @LIBDRM_NOUVEAU_LIBS@
280LIBOBJS = @LIBOBJS@
281LIBS = @LIBS@
282LIBTOOL = @LIBTOOL@
283LIBUDEV_CFLAGS = @LIBUDEV_CFLAGS@
284LIBUDEV_LIBS = @LIBUDEV_LIBS@
285LIB_MAN_DIR = @LIB_MAN_DIR@
286LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
287LIPO = @LIPO@
288LN_S = @LN_S@
289LTLIBOBJS = @LTLIBOBJS@
290LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
291MAKEINFO = @MAKEINFO@
292MANIFEST_TOOL = @MANIFEST_TOOL@
293MAN_SUBSTS = @MAN_SUBSTS@
294MISC_MAN_DIR = @MISC_MAN_DIR@
295MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
296MKDIR_P = @MKDIR_P@
297NM = @NM@
298NMEDIT = @NMEDIT@
299OBJDUMP = @OBJDUMP@
300OBJEXT = @OBJEXT@
301OTOOL = @OTOOL@
302OTOOL64 = @OTOOL64@
303PACKAGE = @PACKAGE@
304PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
305PACKAGE_NAME = @PACKAGE_NAME@
306PACKAGE_STRING = @PACKAGE_STRING@
307PACKAGE_TARNAME = @PACKAGE_TARNAME@
308PACKAGE_URL = @PACKAGE_URL@
309PACKAGE_VERSION = @PACKAGE_VERSION@
310PATH_SEPARATOR = @PATH_SEPARATOR@
311PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
312PCIACCESS_LIBS = @PCIACCESS_LIBS@
313PKG_CONFIG = @PKG_CONFIG@
314PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
315PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
316RANLIB = @RANLIB@
317SED = @SED@
318SET_MAKE = @SET_MAKE@
319SHELL = @SHELL@
320STRICT_CFLAGS = @STRICT_CFLAGS@
321STRIP = @STRIP@
322VERSION = @VERSION@
323XEXT_CFLAGS = @XEXT_CFLAGS@
324XEXT_LIBS = @XEXT_LIBS@
325XORG_CFLAGS = @XORG_CFLAGS@
326XORG_LIBS = @XORG_LIBS@
327XORG_MAN_PAGE = @XORG_MAN_PAGE@
328abs_builddir = @abs_builddir@
329abs_srcdir = @abs_srcdir@
330abs_top_builddir = @abs_top_builddir@
331abs_top_srcdir = @abs_top_srcdir@
332ac_ct_AR = @ac_ct_AR@
333ac_ct_CC = @ac_ct_CC@
334ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
335am__include = @am__include@
336am__leading_dot = @am__leading_dot@
337am__quote = @am__quote@
338am__tar = @am__tar@
339am__untar = @am__untar@
340bindir = @bindir@
341build = @build@
342build_alias = @build_alias@
343build_cpu = @build_cpu@
344build_os = @build_os@
345build_vendor = @build_vendor@
346builddir = @builddir@
347datadir = @datadir@
348datarootdir = @datarootdir@
349docdir = @docdir@
350dvidir = @dvidir@
351exec_prefix = @exec_prefix@
352host = @host@
353host_alias = @host_alias@
354host_cpu = @host_cpu@
355host_os = @host_os@
356host_vendor = @host_vendor@
357htmldir = @htmldir@
358includedir = @includedir@
359infodir = @infodir@
360install_sh = @install_sh@
361libdir = @libdir@
362libexecdir = @libexecdir@
363localedir = @localedir@
364localstatedir = @localstatedir@
365mandir = @mandir@
366mkdir_p = @mkdir_p@
367moduledir = @moduledir@
368oldincludedir = @oldincludedir@
369pdfdir = @pdfdir@
370prefix = @prefix@
371program_transform_name = @program_transform_name@
372psdir = @psdir@
373runstatedir = @runstatedir@
374sbindir = @sbindir@
375sharedstatedir = @sharedstatedir@
376srcdir = @srcdir@
377sysconfdir = @sysconfdir@
378target_alias = @target_alias@
379top_build_prefix = @top_build_prefix@
380top_builddir = @top_builddir@
381top_srcdir = @top_srcdir@
382ACLOCAL_AMFLAGS = -I m4
383SUBDIRS = src man
384MAINTAINERCLEANFILES = ChangeLog INSTALL
385EXTRA_DIST = ChangeLog INSTALL
386all: config.h
387	$(MAKE) $(AM_MAKEFLAGS) all-recursive
388
389.SUFFIXES:
390am--refresh: Makefile
391	@:
392$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
393	@for dep in $?; do \
394	  case '$(am__configure_deps)' in \
395	    *$$dep*) \
396	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
397	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
398		&& exit 0; \
399	      exit 1;; \
400	  esac; \
401	done; \
402	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
403	$(am__cd) $(top_srcdir) && \
404	  $(AUTOMAKE) --foreign Makefile
405Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
406	@case '$?' in \
407	  *config.status*) \
408	    echo ' $(SHELL) ./config.status'; \
409	    $(SHELL) ./config.status;; \
410	  *) \
411	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
412	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
413	esac;
414
415$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
416	$(SHELL) ./config.status --recheck
417
418$(top_srcdir)/configure:  $(am__configure_deps)
419	$(am__cd) $(srcdir) && $(AUTOCONF)
420$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
421	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
422$(am__aclocal_m4_deps):
423
424config.h: stamp-h1
425	@test -f $@ || rm -f stamp-h1
426	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
427
428stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
429	@rm -f stamp-h1
430	cd $(top_builddir) && $(SHELL) ./config.status config.h
431$(srcdir)/config.h.in:  $(am__configure_deps) 
432	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
433	rm -f stamp-h1
434	touch $@
435
436distclean-hdr:
437	-rm -f config.h stamp-h1
438
439mostlyclean-libtool:
440	-rm -f *.lo
441
442clean-libtool:
443	-rm -rf .libs _libs
444
445distclean-libtool:
446	-rm -f libtool config.lt
447
448# This directory's subdirectories are mostly independent; you can cd
449# into them and run 'make' without going through this Makefile.
450# To change the values of 'make' variables: instead of editing Makefiles,
451# (1) if the variable is set in 'config.status', edit 'config.status'
452#     (which will cause the Makefiles to be regenerated when you run 'make');
453# (2) otherwise, pass the desired values on the 'make' command line.
454$(am__recursive_targets):
455	@fail=; \
456	if $(am__make_keepgoing); then \
457	  failcom='fail=yes'; \
458	else \
459	  failcom='exit 1'; \
460	fi; \
461	dot_seen=no; \
462	target=`echo $@ | sed s/-recursive//`; \
463	case "$@" in \
464	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
465	  *) list='$(SUBDIRS)' ;; \
466	esac; \
467	for subdir in $$list; do \
468	  echo "Making $$target in $$subdir"; \
469	  if test "$$subdir" = "."; then \
470	    dot_seen=yes; \
471	    local_target="$$target-am"; \
472	  else \
473	    local_target="$$target"; \
474	  fi; \
475	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
476	  || eval $$failcom; \
477	done; \
478	if test "$$dot_seen" = "no"; then \
479	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
480	fi; test -z "$$fail"
481
482ID: $(am__tagged_files)
483	$(am__define_uniq_tagged_files); mkid -fID $$unique
484tags: tags-recursive
485TAGS: tags
486
487tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
488	set x; \
489	here=`pwd`; \
490	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
491	  include_option=--etags-include; \
492	  empty_fix=.; \
493	else \
494	  include_option=--include; \
495	  empty_fix=; \
496	fi; \
497	list='$(SUBDIRS)'; for subdir in $$list; do \
498	  if test "$$subdir" = .; then :; else \
499	    test ! -f $$subdir/TAGS || \
500	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
501	  fi; \
502	done; \
503	$(am__define_uniq_tagged_files); \
504	shift; \
505	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
506	  test -n "$$unique" || unique=$$empty_fix; \
507	  if test $$# -gt 0; then \
508	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
509	      "$$@" $$unique; \
510	  else \
511	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
512	      $$unique; \
513	  fi; \
514	fi
515ctags: ctags-recursive
516
517CTAGS: ctags
518ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
519	$(am__define_uniq_tagged_files); \
520	test -z "$(CTAGS_ARGS)$$unique" \
521	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
522	     $$unique
523
524GTAGS:
525	here=`$(am__cd) $(top_builddir) && pwd` \
526	  && $(am__cd) $(top_srcdir) \
527	  && gtags -i $(GTAGS_ARGS) "$$here"
528cscope: cscope.files
529	test ! -s cscope.files \
530	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
531clean-cscope:
532	-rm -f cscope.files
533cscope.files: clean-cscope cscopelist
534cscopelist: cscopelist-recursive
535
536cscopelist-am: $(am__tagged_files)
537	list='$(am__tagged_files)'; \
538	case "$(srcdir)" in \
539	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
540	  *) sdir=$(subdir)/$(srcdir) ;; \
541	esac; \
542	for i in $$list; do \
543	  if test -f "$$i"; then \
544	    echo "$(subdir)/$$i"; \
545	  else \
546	    echo "$$sdir/$$i"; \
547	  fi; \
548	done >> $(top_builddir)/cscope.files
549
550distclean-tags:
551	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
552	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
553distdir: $(BUILT_SOURCES)
554	$(MAKE) $(AM_MAKEFLAGS) distdir-am
555
556distdir-am: $(DISTFILES)
557	$(am__remove_distdir)
558	test -d "$(distdir)" || mkdir "$(distdir)"
559	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
560	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
561	list='$(DISTFILES)'; \
562	  dist_files=`for file in $$list; do echo $$file; done | \
563	  sed -e "s|^$$srcdirstrip/||;t" \
564	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
565	case $$dist_files in \
566	  */*) $(MKDIR_P) `echo "$$dist_files" | \
567			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
568			   sort -u` ;; \
569	esac; \
570	for file in $$dist_files; do \
571	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
572	  if test -d $$d/$$file; then \
573	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
574	    if test -d "$(distdir)/$$file"; then \
575	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
576	    fi; \
577	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
578	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
579	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
580	    fi; \
581	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
582	  else \
583	    test -f "$(distdir)/$$file" \
584	    || cp -p $$d/$$file "$(distdir)/$$file" \
585	    || exit 1; \
586	  fi; \
587	done
588	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
589	  if test "$$subdir" = .; then :; else \
590	    $(am__make_dryrun) \
591	      || test -d "$(distdir)/$$subdir" \
592	      || $(MKDIR_P) "$(distdir)/$$subdir" \
593	      || exit 1; \
594	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
595	    $(am__relativize); \
596	    new_distdir=$$reldir; \
597	    dir1=$$subdir; dir2="$(top_distdir)"; \
598	    $(am__relativize); \
599	    new_top_distdir=$$reldir; \
600	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
601	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
602	    ($(am__cd) $$subdir && \
603	      $(MAKE) $(AM_MAKEFLAGS) \
604	        top_distdir="$$new_top_distdir" \
605	        distdir="$$new_distdir" \
606		am__remove_distdir=: \
607		am__skip_length_check=: \
608		am__skip_mode_fix=: \
609	        distdir) \
610	      || exit 1; \
611	  fi; \
612	done
613	-test -n "$(am__skip_mode_fix)" \
614	|| find "$(distdir)" -type d ! -perm -755 \
615		-exec chmod u+rwx,go+rx {} \; -o \
616	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
617	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
618	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
619	|| chmod -R a+r "$(distdir)"
620dist-gzip: distdir
621	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
622	$(am__post_remove_distdir)
623
624dist-bzip2: distdir
625	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
626	$(am__post_remove_distdir)
627
628dist-lzip: distdir
629	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
630	$(am__post_remove_distdir)
631dist-xz: distdir
632	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
633	$(am__post_remove_distdir)
634
635dist-zstd: distdir
636	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
637	$(am__post_remove_distdir)
638
639dist-tarZ: distdir
640	@echo WARNING: "Support for distribution archives compressed with" \
641		       "legacy program 'compress' is deprecated." >&2
642	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
643	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
644	$(am__post_remove_distdir)
645
646dist-shar: distdir
647	@echo WARNING: "Support for shar distribution archives is" \
648	               "deprecated." >&2
649	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
650	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
651	$(am__post_remove_distdir)
652
653dist-zip: distdir
654	-rm -f $(distdir).zip
655	zip -rq $(distdir).zip $(distdir)
656	$(am__post_remove_distdir)
657
658dist dist-all:
659	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
660	$(am__post_remove_distdir)
661
662# This target untars the dist file and tries a VPATH configuration.  Then
663# it guarantees that the distribution is self-contained by making another
664# tarfile.
665distcheck: dist
666	case '$(DIST_ARCHIVES)' in \
667	*.tar.gz*) \
668	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
669	*.tar.bz2*) \
670	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
671	*.tar.lz*) \
672	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
673	*.tar.xz*) \
674	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
675	*.tar.Z*) \
676	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
677	*.shar.gz*) \
678	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
679	*.zip*) \
680	  unzip $(distdir).zip ;;\
681	*.tar.zst*) \
682	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
683	esac
684	chmod -R a-w $(distdir)
685	chmod u+w $(distdir)
686	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
687	chmod a-w $(distdir)
688	test -d $(distdir)/_build || exit 0; \
689	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
690	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
691	  && am__cwd=`pwd` \
692	  && $(am__cd) $(distdir)/_build/sub \
693	  && ../../configure \
694	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
695	    $(DISTCHECK_CONFIGURE_FLAGS) \
696	    --srcdir=../.. --prefix="$$dc_install_base" \
697	  && $(MAKE) $(AM_MAKEFLAGS) \
698	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
699	  && $(MAKE) $(AM_MAKEFLAGS) check \
700	  && $(MAKE) $(AM_MAKEFLAGS) install \
701	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
702	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
703	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
704	        distuninstallcheck \
705	  && chmod -R a-w "$$dc_install_base" \
706	  && ({ \
707	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
708	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
709	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
710	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
711	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
712	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
713	  && rm -rf "$$dc_destdir" \
714	  && $(MAKE) $(AM_MAKEFLAGS) dist \
715	  && rm -rf $(DIST_ARCHIVES) \
716	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
717	  && cd "$$am__cwd" \
718	  || exit 1
719	$(am__post_remove_distdir)
720	@(echo "$(distdir) archives ready for distribution: "; \
721	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
722	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
723distuninstallcheck:
724	@test -n '$(distuninstallcheck_dir)' || { \
725	  echo 'ERROR: trying to run $@ with an empty' \
726	       '$$(distuninstallcheck_dir)' >&2; \
727	  exit 1; \
728	}; \
729	$(am__cd) '$(distuninstallcheck_dir)' || { \
730	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
731	  exit 1; \
732	}; \
733	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
734	   || { echo "ERROR: files left after uninstall:" ; \
735	        if test -n "$(DESTDIR)"; then \
736	          echo "  (check DESTDIR support)"; \
737	        fi ; \
738	        $(distuninstallcheck_listfiles) ; \
739	        exit 1; } >&2
740distcleancheck: distclean
741	@if test '$(srcdir)' = . ; then \
742	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
743	  exit 1 ; \
744	fi
745	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
746	  || { echo "ERROR: files left in build directory after distclean:" ; \
747	       $(distcleancheck_listfiles) ; \
748	       exit 1; } >&2
749check-am: all-am
750check: check-recursive
751all-am: Makefile config.h
752installdirs: installdirs-recursive
753installdirs-am:
754install: install-recursive
755install-exec: install-exec-recursive
756install-data: install-data-recursive
757uninstall: uninstall-recursive
758
759install-am: all-am
760	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
761
762installcheck: installcheck-recursive
763install-strip:
764	if test -z '$(STRIP)'; then \
765	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
766	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
767	      install; \
768	else \
769	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
770	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
771	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
772	fi
773mostlyclean-generic:
774
775clean-generic:
776
777distclean-generic:
778	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
779	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
780
781maintainer-clean-generic:
782	@echo "This command is intended for maintainers to use"
783	@echo "it deletes files that may require special tools to rebuild."
784	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
785clean: clean-recursive
786
787clean-am: clean-generic clean-libtool mostlyclean-am
788
789distclean: distclean-recursive
790	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
791	-rm -f Makefile
792distclean-am: clean-am distclean-generic distclean-hdr \
793	distclean-libtool distclean-tags
794
795dvi: dvi-recursive
796
797dvi-am:
798
799html: html-recursive
800
801html-am:
802
803info: info-recursive
804
805info-am:
806
807install-data-am:
808
809install-dvi: install-dvi-recursive
810
811install-dvi-am:
812
813install-exec-am:
814
815install-html: install-html-recursive
816
817install-html-am:
818
819install-info: install-info-recursive
820
821install-info-am:
822
823install-man:
824
825install-pdf: install-pdf-recursive
826
827install-pdf-am:
828
829install-ps: install-ps-recursive
830
831install-ps-am:
832
833installcheck-am:
834
835maintainer-clean: maintainer-clean-recursive
836	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
837	-rm -rf $(top_srcdir)/autom4te.cache
838	-rm -f Makefile
839maintainer-clean-am: distclean-am maintainer-clean-generic
840
841mostlyclean: mostlyclean-recursive
842
843mostlyclean-am: mostlyclean-generic mostlyclean-libtool
844
845pdf: pdf-recursive
846
847pdf-am:
848
849ps: ps-recursive
850
851ps-am:
852
853uninstall-am:
854
855.MAKE: $(am__recursive_targets) all install-am install-strip
856
857.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
858	am--refresh check check-am clean clean-cscope clean-generic \
859	clean-libtool cscope cscopelist-am ctags ctags-am dist \
860	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
861	dist-xz dist-zip dist-zstd distcheck distclean \
862	distclean-generic distclean-hdr distclean-libtool \
863	distclean-tags distcleancheck distdir distuninstallcheck dvi \
864	dvi-am html html-am info info-am install install-am \
865	install-data install-data-am install-dvi install-dvi-am \
866	install-exec install-exec-am install-html install-html-am \
867	install-info install-info-am install-man install-pdf \
868	install-pdf-am install-ps install-ps-am install-strip \
869	installcheck installcheck-am installdirs installdirs-am \
870	maintainer-clean maintainer-clean-generic mostlyclean \
871	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
872	tags tags-am uninstall uninstall-am
873
874.PRECIOUS: Makefile
875
876
877.PHONY: ChangeLog INSTALL
878
879INSTALL:
880	$(INSTALL_CMD)
881
882ChangeLog:
883	$(CHANGELOG_CMD)
884
885# Tell versions [3.59,3.63) of GNU make to not export all variables.
886# Otherwise a system limit (for SysV at least) may be exceeded.
887.NOEXPORT:
888