Makefile.in revision cd34e0e1
1# Makefile.in generated by automake 1.15 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2014 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# Copyright 2005 Adam Jackson. 18# 19# Permission is hereby granted, free of charge, to any person obtaining a 20# copy of this software and associated documentation files (the "Software"), 21# to deal in the Software without restriction, including without limitation 22# on the rights to use, copy, modify, merge, publish, distribute, sub 23# license, and/or sell copies of the Software, and to permit persons to whom 24# the Software is furnished to do so, subject to the following conditions: 25# 26# The above copyright notice and this permission notice (including the next 27# paragraph) shall be included in all copies or substantial portions of the 28# Software. 29# 30# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 31# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 32# FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL 33# ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER 34# IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 35# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 36VPATH = @srcdir@ 37am__is_gnu_make = { \ 38 if test -z '$(MAKELEVEL)'; then \ 39 false; \ 40 elif test -n '$(MAKE_HOST)'; then \ 41 true; \ 42 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ 43 true; \ 44 else \ 45 false; \ 46 fi; \ 47} 48am__make_running_with_option = \ 49 case $${target_option-} in \ 50 ?) ;; \ 51 *) echo "am__make_running_with_option: internal error: invalid" \ 52 "target option '$${target_option-}' specified" >&2; \ 53 exit 1;; \ 54 esac; \ 55 has_opt=no; \ 56 sane_makeflags=$$MAKEFLAGS; \ 57 if $(am__is_gnu_make); then \ 58 sane_makeflags=$$MFLAGS; \ 59 else \ 60 case $$MAKEFLAGS in \ 61 *\\[\ \ ]*) \ 62 bs=\\; \ 63 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 64 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 65 esac; \ 66 fi; \ 67 skip_next=no; \ 68 strip_trailopt () \ 69 { \ 70 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 71 }; \ 72 for flg in $$sane_makeflags; do \ 73 test $$skip_next = yes && { skip_next=no; continue; }; \ 74 case $$flg in \ 75 *=*|--*) continue;; \ 76 -*I) strip_trailopt 'I'; skip_next=yes;; \ 77 -*I?*) strip_trailopt 'I';; \ 78 -*O) strip_trailopt 'O'; skip_next=yes;; \ 79 -*O?*) strip_trailopt 'O';; \ 80 -*l) strip_trailopt 'l'; skip_next=yes;; \ 81 -*l?*) strip_trailopt 'l';; \ 82 -[dEDm]) skip_next=yes;; \ 83 -[JT]) skip_next=yes;; \ 84 esac; \ 85 case $$flg in \ 86 *$$target_option*) has_opt=yes; break;; \ 87 esac; \ 88 done; \ 89 test $$has_opt = yes 90am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 91am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 92pkgdatadir = $(datadir)/@PACKAGE@ 93pkgincludedir = $(includedir)/@PACKAGE@ 94pkglibdir = $(libdir)/@PACKAGE@ 95pkglibexecdir = $(libexecdir)/@PACKAGE@ 96am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 97install_sh_DATA = $(install_sh) -c -m 644 98install_sh_PROGRAM = $(install_sh) -c 99install_sh_SCRIPT = $(install_sh) -c 100INSTALL_HEADER = $(INSTALL_DATA) 101transform = $(program_transform_name) 102NORMAL_INSTALL = : 103PRE_INSTALL = : 104POST_INSTALL = : 105NORMAL_UNINSTALL = : 106PRE_UNINSTALL = : 107POST_UNINSTALL = : 108build_triplet = @build@ 109host_triplet = @host@ 110subdir = . 111ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 112am__aclocal_m4_deps = $(top_srcdir)/configure.ac 113am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 114 $(ACLOCAL_M4) 115DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ 116 $(am__configure_deps) $(am__DIST_COMMON) 117am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 118 configure.lineno config.status.lineno 119mkinstalldirs = $(install_sh) -d 120CONFIG_HEADER = config.h 121CONFIG_CLEAN_FILES = 122CONFIG_CLEAN_VPATH_FILES = 123AM_V_P = $(am__v_P_@AM_V@) 124am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 125am__v_P_0 = false 126am__v_P_1 = : 127AM_V_GEN = $(am__v_GEN_@AM_V@) 128am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 129am__v_GEN_0 = @echo " GEN " $@; 130am__v_GEN_1 = 131AM_V_at = $(am__v_at_@AM_V@) 132am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 133am__v_at_0 = @ 134am__v_at_1 = 135SOURCES = 136DIST_SOURCES = 137RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 138 ctags-recursive dvi-recursive html-recursive info-recursive \ 139 install-data-recursive install-dvi-recursive \ 140 install-exec-recursive install-html-recursive \ 141 install-info-recursive install-pdf-recursive \ 142 install-ps-recursive install-recursive installcheck-recursive \ 143 installdirs-recursive pdf-recursive ps-recursive \ 144 tags-recursive uninstall-recursive 145am__can_run_installinfo = \ 146 case $$AM_UPDATE_INFO_DIR in \ 147 n|no|NO) false;; \ 148 *) (install-info --version) >/dev/null 2>&1;; \ 149 esac 150RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 151 distclean-recursive maintainer-clean-recursive 152am__recursive_targets = \ 153 $(RECURSIVE_TARGETS) \ 154 $(RECURSIVE_CLEAN_TARGETS) \ 155 $(am__extra_recursive_targets) 156AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 157 cscope distdir dist dist-all distcheck 158am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ 159 $(LISP)config.h.in 160# Read a list of newline-separated strings from the standard input, 161# and print each of them once, without duplicates. Input order is 162# *not* preserved. 163am__uniquify_input = $(AWK) '\ 164 BEGIN { nonempty = 0; } \ 165 { items[$$0] = 1; nonempty = 1; } \ 166 END { if (nonempty) { for (i in items) print i; }; } \ 167' 168# Make sure the list of sources is unique. This is necessary because, 169# e.g., the same source file might be shared among _SOURCES variables 170# for different programs/libraries. 171am__define_uniq_tagged_files = \ 172 list='$(am__tagged_files)'; \ 173 unique=`for i in $$list; do \ 174 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 175 done | $(am__uniquify_input)` 176ETAGS = etags 177CTAGS = ctags 178CSCOPE = cscope 179DIST_SUBDIRS = $(SUBDIRS) 180am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in COPYING \ 181 ChangeLog INSTALL compile config.guess config.sub install-sh \ 182 ltmain.sh missing 183DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 184distdir = $(PACKAGE)-$(VERSION) 185top_distdir = $(distdir) 186am__remove_distdir = \ 187 if test -d "$(distdir)"; then \ 188 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 189 && rm -rf "$(distdir)" \ 190 || { sleep 5 && rm -rf "$(distdir)"; }; \ 191 else :; fi 192am__post_remove_distdir = $(am__remove_distdir) 193am__relativize = \ 194 dir0=`pwd`; \ 195 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 196 sed_rest='s,^[^/]*/*,,'; \ 197 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 198 sed_butlast='s,/*[^/]*$$,,'; \ 199 while test -n "$$dir1"; do \ 200 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 201 if test "$$first" != "."; then \ 202 if test "$$first" = ".."; then \ 203 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 204 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 205 else \ 206 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 207 if test "$$first2" = "$$first"; then \ 208 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 209 else \ 210 dir2="../$$dir2"; \ 211 fi; \ 212 dir0="$$dir0"/"$$first"; \ 213 fi; \ 214 fi; \ 215 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 216 done; \ 217 reldir="$$dir2" 218DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 219GZIP_ENV = --best 220DIST_TARGETS = dist-bzip2 dist-gzip 221distuninstallcheck_listfiles = find . -type f -print 222am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 223 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 224distcleancheck_listfiles = find . -type f -print 225ACLOCAL = @ACLOCAL@ 226ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ 227ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ 228AMTAR = @AMTAR@ 229AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 230APP_MAN_DIR = @APP_MAN_DIR@ 231APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ 232AR = @AR@ 233AUTOCONF = @AUTOCONF@ 234AUTOHEADER = @AUTOHEADER@ 235AUTOMAKE = @AUTOMAKE@ 236AWK = @AWK@ 237BASE_CFLAGS = @BASE_CFLAGS@ 238CC = @CC@ 239CCDEPMODE = @CCDEPMODE@ 240CFLAGS = @CFLAGS@ 241CHANGELOG_CMD = @CHANGELOG_CMD@ 242CPP = @CPP@ 243CPPFLAGS = @CPPFLAGS@ 244CWARNFLAGS = @CWARNFLAGS@ 245CYGPATH_W = @CYGPATH_W@ 246DEFS = @DEFS@ 247DEPDIR = @DEPDIR@ 248DLLTOOL = @DLLTOOL@ 249DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ 250DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ 251DRIVER_NAME = @DRIVER_NAME@ 252DSYMUTIL = @DSYMUTIL@ 253DUMPBIN = @DUMPBIN@ 254ECHO_C = @ECHO_C@ 255ECHO_N = @ECHO_N@ 256ECHO_T = @ECHO_T@ 257EGREP = @EGREP@ 258EXEEXT = @EXEEXT@ 259FGREP = @FGREP@ 260FILE_MAN_DIR = @FILE_MAN_DIR@ 261FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ 262GREP = @GREP@ 263INSTALL = @INSTALL@ 264INSTALL_CMD = @INSTALL_CMD@ 265INSTALL_DATA = @INSTALL_DATA@ 266INSTALL_PROGRAM = @INSTALL_PROGRAM@ 267INSTALL_SCRIPT = @INSTALL_SCRIPT@ 268INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 269LD = @LD@ 270LDFLAGS = @LDFLAGS@ 271LIBDRM_CFLAGS = @LIBDRM_CFLAGS@ 272LIBDRM_LIBS = @LIBDRM_LIBS@ 273LIBDRM_NOUVEAU_CFLAGS = @LIBDRM_NOUVEAU_CFLAGS@ 274LIBDRM_NOUVEAU_LIBS = @LIBDRM_NOUVEAU_LIBS@ 275LIBOBJS = @LIBOBJS@ 276LIBS = @LIBS@ 277LIBTOOL = @LIBTOOL@ 278LIBUDEV_CFLAGS = @LIBUDEV_CFLAGS@ 279LIBUDEV_LIBS = @LIBUDEV_LIBS@ 280LIB_MAN_DIR = @LIB_MAN_DIR@ 281LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ 282LIPO = @LIPO@ 283LN_S = @LN_S@ 284LTLIBOBJS = @LTLIBOBJS@ 285LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ 286MAKEINFO = @MAKEINFO@ 287MANIFEST_TOOL = @MANIFEST_TOOL@ 288MAN_SUBSTS = @MAN_SUBSTS@ 289MISC_MAN_DIR = @MISC_MAN_DIR@ 290MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ 291MKDIR_P = @MKDIR_P@ 292NM = @NM@ 293NMEDIT = @NMEDIT@ 294OBJDUMP = @OBJDUMP@ 295OBJEXT = @OBJEXT@ 296OTOOL = @OTOOL@ 297OTOOL64 = @OTOOL64@ 298PACKAGE = @PACKAGE@ 299PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 300PACKAGE_NAME = @PACKAGE_NAME@ 301PACKAGE_STRING = @PACKAGE_STRING@ 302PACKAGE_TARNAME = @PACKAGE_TARNAME@ 303PACKAGE_URL = @PACKAGE_URL@ 304PACKAGE_VERSION = @PACKAGE_VERSION@ 305PATH_SEPARATOR = @PATH_SEPARATOR@ 306PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@ 307PCIACCESS_LIBS = @PCIACCESS_LIBS@ 308PKG_CONFIG = @PKG_CONFIG@ 309PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ 310PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ 311RANLIB = @RANLIB@ 312SED = @SED@ 313SET_MAKE = @SET_MAKE@ 314SHELL = @SHELL@ 315STRICT_CFLAGS = @STRICT_CFLAGS@ 316STRIP = @STRIP@ 317VERSION = @VERSION@ 318XEXT_CFLAGS = @XEXT_CFLAGS@ 319XEXT_LIBS = @XEXT_LIBS@ 320XORG_CFLAGS = @XORG_CFLAGS@ 321XORG_LIBS = @XORG_LIBS@ 322XORG_MAN_PAGE = @XORG_MAN_PAGE@ 323abs_builddir = @abs_builddir@ 324abs_srcdir = @abs_srcdir@ 325abs_top_builddir = @abs_top_builddir@ 326abs_top_srcdir = @abs_top_srcdir@ 327ac_ct_AR = @ac_ct_AR@ 328ac_ct_CC = @ac_ct_CC@ 329ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 330am__include = @am__include@ 331am__leading_dot = @am__leading_dot@ 332am__quote = @am__quote@ 333am__tar = @am__tar@ 334am__untar = @am__untar@ 335bindir = @bindir@ 336build = @build@ 337build_alias = @build_alias@ 338build_cpu = @build_cpu@ 339build_os = @build_os@ 340build_vendor = @build_vendor@ 341builddir = @builddir@ 342datadir = @datadir@ 343datarootdir = @datarootdir@ 344docdir = @docdir@ 345dvidir = @dvidir@ 346exec_prefix = @exec_prefix@ 347host = @host@ 348host_alias = @host_alias@ 349host_cpu = @host_cpu@ 350host_os = @host_os@ 351host_vendor = @host_vendor@ 352htmldir = @htmldir@ 353includedir = @includedir@ 354infodir = @infodir@ 355install_sh = @install_sh@ 356libdir = @libdir@ 357libexecdir = @libexecdir@ 358localedir = @localedir@ 359localstatedir = @localstatedir@ 360mandir = @mandir@ 361mkdir_p = @mkdir_p@ 362moduledir = @moduledir@ 363oldincludedir = @oldincludedir@ 364pdfdir = @pdfdir@ 365prefix = @prefix@ 366program_transform_name = @program_transform_name@ 367psdir = @psdir@ 368sbindir = @sbindir@ 369sharedstatedir = @sharedstatedir@ 370srcdir = @srcdir@ 371sysconfdir = @sysconfdir@ 372target_alias = @target_alias@ 373top_build_prefix = @top_build_prefix@ 374top_builddir = @top_builddir@ 375top_srcdir = @top_srcdir@ 376AUTOMAKE_OPTIONS = foreign 377SUBDIRS = src man 378MAINTAINERCLEANFILES = ChangeLog INSTALL 379EXTRA_DIST = ChangeLog INSTALL 380all: config.h 381 $(MAKE) $(AM_MAKEFLAGS) all-recursive 382 383.SUFFIXES: 384am--refresh: Makefile 385 @: 386$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 387 @for dep in $?; do \ 388 case '$(am__configure_deps)' in \ 389 *$$dep*) \ 390 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 391 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 392 && exit 0; \ 393 exit 1;; \ 394 esac; \ 395 done; \ 396 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 397 $(am__cd) $(top_srcdir) && \ 398 $(AUTOMAKE) --foreign Makefile 399Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 400 @case '$?' in \ 401 *config.status*) \ 402 echo ' $(SHELL) ./config.status'; \ 403 $(SHELL) ./config.status;; \ 404 *) \ 405 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ 406 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ 407 esac; 408 409$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 410 $(SHELL) ./config.status --recheck 411 412$(top_srcdir)/configure: $(am__configure_deps) 413 $(am__cd) $(srcdir) && $(AUTOCONF) 414$(ACLOCAL_M4): $(am__aclocal_m4_deps) 415 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 416$(am__aclocal_m4_deps): 417 418config.h: stamp-h1 419 @test -f $@ || rm -f stamp-h1 420 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 421 422stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 423 @rm -f stamp-h1 424 cd $(top_builddir) && $(SHELL) ./config.status config.h 425$(srcdir)/config.h.in: $(am__configure_deps) 426 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 427 rm -f stamp-h1 428 touch $@ 429 430distclean-hdr: 431 -rm -f config.h stamp-h1 432 433mostlyclean-libtool: 434 -rm -f *.lo 435 436clean-libtool: 437 -rm -rf .libs _libs 438 439distclean-libtool: 440 -rm -f libtool config.lt 441 442# This directory's subdirectories are mostly independent; you can cd 443# into them and run 'make' without going through this Makefile. 444# To change the values of 'make' variables: instead of editing Makefiles, 445# (1) if the variable is set in 'config.status', edit 'config.status' 446# (which will cause the Makefiles to be regenerated when you run 'make'); 447# (2) otherwise, pass the desired values on the 'make' command line. 448$(am__recursive_targets): 449 @fail=; \ 450 if $(am__make_keepgoing); then \ 451 failcom='fail=yes'; \ 452 else \ 453 failcom='exit 1'; \ 454 fi; \ 455 dot_seen=no; \ 456 target=`echo $@ | sed s/-recursive//`; \ 457 case "$@" in \ 458 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 459 *) list='$(SUBDIRS)' ;; \ 460 esac; \ 461 for subdir in $$list; do \ 462 echo "Making $$target in $$subdir"; \ 463 if test "$$subdir" = "."; then \ 464 dot_seen=yes; \ 465 local_target="$$target-am"; \ 466 else \ 467 local_target="$$target"; \ 468 fi; \ 469 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 470 || eval $$failcom; \ 471 done; \ 472 if test "$$dot_seen" = "no"; then \ 473 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 474 fi; test -z "$$fail" 475 476ID: $(am__tagged_files) 477 $(am__define_uniq_tagged_files); mkid -fID $$unique 478tags: tags-recursive 479TAGS: tags 480 481tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 482 set x; \ 483 here=`pwd`; \ 484 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 485 include_option=--etags-include; \ 486 empty_fix=.; \ 487 else \ 488 include_option=--include; \ 489 empty_fix=; \ 490 fi; \ 491 list='$(SUBDIRS)'; for subdir in $$list; do \ 492 if test "$$subdir" = .; then :; else \ 493 test ! -f $$subdir/TAGS || \ 494 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 495 fi; \ 496 done; \ 497 $(am__define_uniq_tagged_files); \ 498 shift; \ 499 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 500 test -n "$$unique" || unique=$$empty_fix; \ 501 if test $$# -gt 0; then \ 502 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 503 "$$@" $$unique; \ 504 else \ 505 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 506 $$unique; \ 507 fi; \ 508 fi 509ctags: ctags-recursive 510 511CTAGS: ctags 512ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 513 $(am__define_uniq_tagged_files); \ 514 test -z "$(CTAGS_ARGS)$$unique" \ 515 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 516 $$unique 517 518GTAGS: 519 here=`$(am__cd) $(top_builddir) && pwd` \ 520 && $(am__cd) $(top_srcdir) \ 521 && gtags -i $(GTAGS_ARGS) "$$here" 522cscope: cscope.files 523 test ! -s cscope.files \ 524 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 525clean-cscope: 526 -rm -f cscope.files 527cscope.files: clean-cscope cscopelist 528cscopelist: cscopelist-recursive 529 530cscopelist-am: $(am__tagged_files) 531 list='$(am__tagged_files)'; \ 532 case "$(srcdir)" in \ 533 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 534 *) sdir=$(subdir)/$(srcdir) ;; \ 535 esac; \ 536 for i in $$list; do \ 537 if test -f "$$i"; then \ 538 echo "$(subdir)/$$i"; \ 539 else \ 540 echo "$$sdir/$$i"; \ 541 fi; \ 542 done >> $(top_builddir)/cscope.files 543 544distclean-tags: 545 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 546 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 547 548distdir: $(DISTFILES) 549 $(am__remove_distdir) 550 test -d "$(distdir)" || mkdir "$(distdir)" 551 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 552 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 553 list='$(DISTFILES)'; \ 554 dist_files=`for file in $$list; do echo $$file; done | \ 555 sed -e "s|^$$srcdirstrip/||;t" \ 556 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 557 case $$dist_files in \ 558 */*) $(MKDIR_P) `echo "$$dist_files" | \ 559 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 560 sort -u` ;; \ 561 esac; \ 562 for file in $$dist_files; do \ 563 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 564 if test -d $$d/$$file; then \ 565 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 566 if test -d "$(distdir)/$$file"; then \ 567 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 568 fi; \ 569 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 570 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 571 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 572 fi; \ 573 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 574 else \ 575 test -f "$(distdir)/$$file" \ 576 || cp -p $$d/$$file "$(distdir)/$$file" \ 577 || exit 1; \ 578 fi; \ 579 done 580 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 581 if test "$$subdir" = .; then :; else \ 582 $(am__make_dryrun) \ 583 || test -d "$(distdir)/$$subdir" \ 584 || $(MKDIR_P) "$(distdir)/$$subdir" \ 585 || exit 1; \ 586 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 587 $(am__relativize); \ 588 new_distdir=$$reldir; \ 589 dir1=$$subdir; dir2="$(top_distdir)"; \ 590 $(am__relativize); \ 591 new_top_distdir=$$reldir; \ 592 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 593 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 594 ($(am__cd) $$subdir && \ 595 $(MAKE) $(AM_MAKEFLAGS) \ 596 top_distdir="$$new_top_distdir" \ 597 distdir="$$new_distdir" \ 598 am__remove_distdir=: \ 599 am__skip_length_check=: \ 600 am__skip_mode_fix=: \ 601 distdir) \ 602 || exit 1; \ 603 fi; \ 604 done 605 -test -n "$(am__skip_mode_fix)" \ 606 || find "$(distdir)" -type d ! -perm -755 \ 607 -exec chmod u+rwx,go+rx {} \; -o \ 608 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 609 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 610 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 611 || chmod -R a+r "$(distdir)" 612dist-gzip: distdir 613 tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz 614 $(am__post_remove_distdir) 615dist-bzip2: distdir 616 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 617 $(am__post_remove_distdir) 618 619dist-lzip: distdir 620 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 621 $(am__post_remove_distdir) 622 623dist-xz: distdir 624 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 625 $(am__post_remove_distdir) 626 627dist-tarZ: distdir 628 @echo WARNING: "Support for distribution archives compressed with" \ 629 "legacy program 'compress' is deprecated." >&2 630 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 631 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 632 $(am__post_remove_distdir) 633 634dist-shar: distdir 635 @echo WARNING: "Support for shar distribution archives is" \ 636 "deprecated." >&2 637 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 638 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz 639 $(am__post_remove_distdir) 640 641dist-zip: distdir 642 -rm -f $(distdir).zip 643 zip -rq $(distdir).zip $(distdir) 644 $(am__post_remove_distdir) 645 646dist dist-all: 647 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 648 $(am__post_remove_distdir) 649 650# This target untars the dist file and tries a VPATH configuration. Then 651# it guarantees that the distribution is self-contained by making another 652# tarfile. 653distcheck: dist 654 case '$(DIST_ARCHIVES)' in \ 655 *.tar.gz*) \ 656 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ 657 *.tar.bz2*) \ 658 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 659 *.tar.lz*) \ 660 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 661 *.tar.xz*) \ 662 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 663 *.tar.Z*) \ 664 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 665 *.shar.gz*) \ 666 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ 667 *.zip*) \ 668 unzip $(distdir).zip ;;\ 669 esac 670 chmod -R a-w $(distdir) 671 chmod u+w $(distdir) 672 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst 673 chmod a-w $(distdir) 674 test -d $(distdir)/_build || exit 0; \ 675 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 676 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 677 && am__cwd=`pwd` \ 678 && $(am__cd) $(distdir)/_build/sub \ 679 && ../../configure \ 680 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 681 $(DISTCHECK_CONFIGURE_FLAGS) \ 682 --srcdir=../.. --prefix="$$dc_install_base" \ 683 && $(MAKE) $(AM_MAKEFLAGS) \ 684 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 685 && $(MAKE) $(AM_MAKEFLAGS) check \ 686 && $(MAKE) $(AM_MAKEFLAGS) install \ 687 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 688 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 689 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 690 distuninstallcheck \ 691 && chmod -R a-w "$$dc_install_base" \ 692 && ({ \ 693 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 694 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 695 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 696 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 697 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 698 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 699 && rm -rf "$$dc_destdir" \ 700 && $(MAKE) $(AM_MAKEFLAGS) dist \ 701 && rm -rf $(DIST_ARCHIVES) \ 702 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 703 && cd "$$am__cwd" \ 704 || exit 1 705 $(am__post_remove_distdir) 706 @(echo "$(distdir) archives ready for distribution: "; \ 707 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 708 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 709distuninstallcheck: 710 @test -n '$(distuninstallcheck_dir)' || { \ 711 echo 'ERROR: trying to run $@ with an empty' \ 712 '$$(distuninstallcheck_dir)' >&2; \ 713 exit 1; \ 714 }; \ 715 $(am__cd) '$(distuninstallcheck_dir)' || { \ 716 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 717 exit 1; \ 718 }; \ 719 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 720 || { echo "ERROR: files left after uninstall:" ; \ 721 if test -n "$(DESTDIR)"; then \ 722 echo " (check DESTDIR support)"; \ 723 fi ; \ 724 $(distuninstallcheck_listfiles) ; \ 725 exit 1; } >&2 726distcleancheck: distclean 727 @if test '$(srcdir)' = . ; then \ 728 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 729 exit 1 ; \ 730 fi 731 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 732 || { echo "ERROR: files left in build directory after distclean:" ; \ 733 $(distcleancheck_listfiles) ; \ 734 exit 1; } >&2 735check-am: all-am 736check: check-recursive 737all-am: Makefile config.h 738installdirs: installdirs-recursive 739installdirs-am: 740install: install-recursive 741install-exec: install-exec-recursive 742install-data: install-data-recursive 743uninstall: uninstall-recursive 744 745install-am: all-am 746 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 747 748installcheck: installcheck-recursive 749install-strip: 750 if test -z '$(STRIP)'; then \ 751 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 752 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 753 install; \ 754 else \ 755 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 756 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 757 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 758 fi 759mostlyclean-generic: 760 761clean-generic: 762 763distclean-generic: 764 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 765 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 766 767maintainer-clean-generic: 768 @echo "This command is intended for maintainers to use" 769 @echo "it deletes files that may require special tools to rebuild." 770 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 771clean: clean-recursive 772 773clean-am: clean-generic clean-libtool mostlyclean-am 774 775distclean: distclean-recursive 776 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 777 -rm -f Makefile 778distclean-am: clean-am distclean-generic distclean-hdr \ 779 distclean-libtool distclean-tags 780 781dvi: dvi-recursive 782 783dvi-am: 784 785html: html-recursive 786 787html-am: 788 789info: info-recursive 790 791info-am: 792 793install-data-am: 794 795install-dvi: install-dvi-recursive 796 797install-dvi-am: 798 799install-exec-am: 800 801install-html: install-html-recursive 802 803install-html-am: 804 805install-info: install-info-recursive 806 807install-info-am: 808 809install-man: 810 811install-pdf: install-pdf-recursive 812 813install-pdf-am: 814 815install-ps: install-ps-recursive 816 817install-ps-am: 818 819installcheck-am: 820 821maintainer-clean: maintainer-clean-recursive 822 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 823 -rm -rf $(top_srcdir)/autom4te.cache 824 -rm -f Makefile 825maintainer-clean-am: distclean-am maintainer-clean-generic 826 827mostlyclean: mostlyclean-recursive 828 829mostlyclean-am: mostlyclean-generic mostlyclean-libtool 830 831pdf: pdf-recursive 832 833pdf-am: 834 835ps: ps-recursive 836 837ps-am: 838 839uninstall-am: 840 841.MAKE: $(am__recursive_targets) all install-am install-strip 842 843.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 844 am--refresh check check-am clean clean-cscope clean-generic \ 845 clean-libtool cscope cscopelist-am ctags ctags-am dist \ 846 dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \ 847 dist-xz dist-zip distcheck distclean distclean-generic \ 848 distclean-hdr distclean-libtool distclean-tags distcleancheck \ 849 distdir distuninstallcheck dvi dvi-am html html-am info \ 850 info-am install install-am install-data install-data-am \ 851 install-dvi install-dvi-am install-exec install-exec-am \ 852 install-html install-html-am install-info install-info-am \ 853 install-man install-pdf install-pdf-am install-ps \ 854 install-ps-am install-strip installcheck installcheck-am \ 855 installdirs installdirs-am maintainer-clean \ 856 maintainer-clean-generic mostlyclean mostlyclean-generic \ 857 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ 858 uninstall-am 859 860.PRECIOUS: Makefile 861 862 863.PHONY: ChangeLog INSTALL 864 865INSTALL: 866 $(INSTALL_CMD) 867 868ChangeLog: 869 $(CHANGELOG_CMD) 870 871# Tell versions [3.59,3.63) of GNU make to not export all variables. 872# Otherwise a system limit (for SysV at least) may be exceeded. 873.NOEXPORT: 874