Makefile.in revision dd52494d
1# Makefile.in generated by automake 1.16.1 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2018 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# Copyright 2005 Adam Jackson. 18# 19# Permission is hereby granted, free of charge, to any person obtaining a 20# copy of this software and associated documentation files (the "Software"), 21# to deal in the Software without restriction, including without limitation 22# on the rights to use, copy, modify, merge, publish, distribute, sub 23# license, and/or sell copies of the Software, and to permit persons to whom 24# the Software is furnished to do so, subject to the following conditions: 25# 26# The above copyright notice and this permission notice (including the next 27# paragraph) shall be included in all copies or substantial portions of the 28# Software. 29# 30# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 31# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 32# FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL 33# ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER 34# IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 35# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 36VPATH = @srcdir@ 37am__is_gnu_make = { \ 38 if test -z '$(MAKELEVEL)'; then \ 39 false; \ 40 elif test -n '$(MAKE_HOST)'; then \ 41 true; \ 42 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ 43 true; \ 44 else \ 45 false; \ 46 fi; \ 47} 48am__make_running_with_option = \ 49 case $${target_option-} in \ 50 ?) ;; \ 51 *) echo "am__make_running_with_option: internal error: invalid" \ 52 "target option '$${target_option-}' specified" >&2; \ 53 exit 1;; \ 54 esac; \ 55 has_opt=no; \ 56 sane_makeflags=$$MAKEFLAGS; \ 57 if $(am__is_gnu_make); then \ 58 sane_makeflags=$$MFLAGS; \ 59 else \ 60 case $$MAKEFLAGS in \ 61 *\\[\ \ ]*) \ 62 bs=\\; \ 63 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 64 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 65 esac; \ 66 fi; \ 67 skip_next=no; \ 68 strip_trailopt () \ 69 { \ 70 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 71 }; \ 72 for flg in $$sane_makeflags; do \ 73 test $$skip_next = yes && { skip_next=no; continue; }; \ 74 case $$flg in \ 75 *=*|--*) continue;; \ 76 -*I) strip_trailopt 'I'; skip_next=yes;; \ 77 -*I?*) strip_trailopt 'I';; \ 78 -*O) strip_trailopt 'O'; skip_next=yes;; \ 79 -*O?*) strip_trailopt 'O';; \ 80 -*l) strip_trailopt 'l'; skip_next=yes;; \ 81 -*l?*) strip_trailopt 'l';; \ 82 -[dEDm]) skip_next=yes;; \ 83 -[JT]) skip_next=yes;; \ 84 esac; \ 85 case $$flg in \ 86 *$$target_option*) has_opt=yes; break;; \ 87 esac; \ 88 done; \ 89 test $$has_opt = yes 90am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 91am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 92pkgdatadir = $(datadir)/@PACKAGE@ 93pkgincludedir = $(includedir)/@PACKAGE@ 94pkglibdir = $(libdir)/@PACKAGE@ 95pkglibexecdir = $(libexecdir)/@PACKAGE@ 96am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 97install_sh_DATA = $(install_sh) -c -m 644 98install_sh_PROGRAM = $(install_sh) -c 99install_sh_SCRIPT = $(install_sh) -c 100INSTALL_HEADER = $(INSTALL_DATA) 101transform = $(program_transform_name) 102NORMAL_INSTALL = : 103PRE_INSTALL = : 104POST_INSTALL = : 105NORMAL_UNINSTALL = : 106PRE_UNINSTALL = : 107POST_UNINSTALL = : 108build_triplet = @build@ 109host_triplet = @host@ 110subdir = . 111ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 112am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ 113 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ 114 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ 115 $(top_srcdir)/configure.ac 116am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 117 $(ACLOCAL_M4) 118DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ 119 $(am__configure_deps) $(am__DIST_COMMON) 120am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 121 configure.lineno config.status.lineno 122mkinstalldirs = $(install_sh) -d 123CONFIG_HEADER = config.h 124CONFIG_CLEAN_FILES = 125CONFIG_CLEAN_VPATH_FILES = 126AM_V_P = $(am__v_P_@AM_V@) 127am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 128am__v_P_0 = false 129am__v_P_1 = : 130AM_V_GEN = $(am__v_GEN_@AM_V@) 131am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 132am__v_GEN_0 = @echo " GEN " $@; 133am__v_GEN_1 = 134AM_V_at = $(am__v_at_@AM_V@) 135am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 136am__v_at_0 = @ 137am__v_at_1 = 138SOURCES = 139DIST_SOURCES = 140RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 141 ctags-recursive dvi-recursive html-recursive info-recursive \ 142 install-data-recursive install-dvi-recursive \ 143 install-exec-recursive install-html-recursive \ 144 install-info-recursive install-pdf-recursive \ 145 install-ps-recursive install-recursive installcheck-recursive \ 146 installdirs-recursive pdf-recursive ps-recursive \ 147 tags-recursive uninstall-recursive 148am__can_run_installinfo = \ 149 case $$AM_UPDATE_INFO_DIR in \ 150 n|no|NO) false;; \ 151 *) (install-info --version) >/dev/null 2>&1;; \ 152 esac 153RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 154 distclean-recursive maintainer-clean-recursive 155am__recursive_targets = \ 156 $(RECURSIVE_TARGETS) \ 157 $(RECURSIVE_CLEAN_TARGETS) \ 158 $(am__extra_recursive_targets) 159AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 160 cscope distdir distdir-am dist dist-all distcheck 161am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ 162 $(LISP)config.h.in 163# Read a list of newline-separated strings from the standard input, 164# and print each of them once, without duplicates. Input order is 165# *not* preserved. 166am__uniquify_input = $(AWK) '\ 167 BEGIN { nonempty = 0; } \ 168 { items[$$0] = 1; nonempty = 1; } \ 169 END { if (nonempty) { for (i in items) print i; }; } \ 170' 171# Make sure the list of sources is unique. This is necessary because, 172# e.g., the same source file might be shared among _SOURCES variables 173# for different programs/libraries. 174am__define_uniq_tagged_files = \ 175 list='$(am__tagged_files)'; \ 176 unique=`for i in $$list; do \ 177 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 178 done | $(am__uniquify_input)` 179ETAGS = etags 180CTAGS = ctags 181CSCOPE = cscope 182DIST_SUBDIRS = $(SUBDIRS) 183am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in COPYING \ 184 ChangeLog INSTALL compile config.guess config.sub install-sh \ 185 ltmain.sh missing 186DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 187distdir = $(PACKAGE)-$(VERSION) 188top_distdir = $(distdir) 189am__remove_distdir = \ 190 if test -d "$(distdir)"; then \ 191 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 192 && rm -rf "$(distdir)" \ 193 || { sleep 5 && rm -rf "$(distdir)"; }; \ 194 else :; fi 195am__post_remove_distdir = $(am__remove_distdir) 196am__relativize = \ 197 dir0=`pwd`; \ 198 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 199 sed_rest='s,^[^/]*/*,,'; \ 200 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 201 sed_butlast='s,/*[^/]*$$,,'; \ 202 while test -n "$$dir1"; do \ 203 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 204 if test "$$first" != "."; then \ 205 if test "$$first" = ".."; then \ 206 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 207 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 208 else \ 209 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 210 if test "$$first2" = "$$first"; then \ 211 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 212 else \ 213 dir2="../$$dir2"; \ 214 fi; \ 215 dir0="$$dir0"/"$$first"; \ 216 fi; \ 217 fi; \ 218 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 219 done; \ 220 reldir="$$dir2" 221DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 222GZIP_ENV = --best 223DIST_TARGETS = dist-bzip2 dist-gzip 224distuninstallcheck_listfiles = find . -type f -print 225am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 226 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 227distcleancheck_listfiles = find . -type f -print 228ACLOCAL = @ACLOCAL@ 229ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ 230ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ 231AMTAR = @AMTAR@ 232AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 233APP_MAN_DIR = @APP_MAN_DIR@ 234APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ 235AR = @AR@ 236AUTOCONF = @AUTOCONF@ 237AUTOHEADER = @AUTOHEADER@ 238AUTOMAKE = @AUTOMAKE@ 239AWK = @AWK@ 240BASE_CFLAGS = @BASE_CFLAGS@ 241CC = @CC@ 242CCDEPMODE = @CCDEPMODE@ 243CFLAGS = @CFLAGS@ 244CHANGELOG_CMD = @CHANGELOG_CMD@ 245CPP = @CPP@ 246CPPFLAGS = @CPPFLAGS@ 247CWARNFLAGS = @CWARNFLAGS@ 248CYGPATH_W = @CYGPATH_W@ 249DEFS = @DEFS@ 250DEPDIR = @DEPDIR@ 251DLLTOOL = @DLLTOOL@ 252DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ 253DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ 254DRIVER_NAME = @DRIVER_NAME@ 255DSYMUTIL = @DSYMUTIL@ 256DUMPBIN = @DUMPBIN@ 257ECHO_C = @ECHO_C@ 258ECHO_N = @ECHO_N@ 259ECHO_T = @ECHO_T@ 260EGREP = @EGREP@ 261EXEEXT = @EXEEXT@ 262FGREP = @FGREP@ 263FILE_MAN_DIR = @FILE_MAN_DIR@ 264FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ 265GREP = @GREP@ 266INSTALL = @INSTALL@ 267INSTALL_CMD = @INSTALL_CMD@ 268INSTALL_DATA = @INSTALL_DATA@ 269INSTALL_PROGRAM = @INSTALL_PROGRAM@ 270INSTALL_SCRIPT = @INSTALL_SCRIPT@ 271INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 272LD = @LD@ 273LDFLAGS = @LDFLAGS@ 274LIBDRM_CFLAGS = @LIBDRM_CFLAGS@ 275LIBDRM_LIBS = @LIBDRM_LIBS@ 276LIBDRM_NOUVEAU_CFLAGS = @LIBDRM_NOUVEAU_CFLAGS@ 277LIBDRM_NOUVEAU_LIBS = @LIBDRM_NOUVEAU_LIBS@ 278LIBOBJS = @LIBOBJS@ 279LIBS = @LIBS@ 280LIBTOOL = @LIBTOOL@ 281LIBUDEV_CFLAGS = @LIBUDEV_CFLAGS@ 282LIBUDEV_LIBS = @LIBUDEV_LIBS@ 283LIB_MAN_DIR = @LIB_MAN_DIR@ 284LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ 285LIPO = @LIPO@ 286LN_S = @LN_S@ 287LTLIBOBJS = @LTLIBOBJS@ 288LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ 289MAKEINFO = @MAKEINFO@ 290MANIFEST_TOOL = @MANIFEST_TOOL@ 291MAN_SUBSTS = @MAN_SUBSTS@ 292MISC_MAN_DIR = @MISC_MAN_DIR@ 293MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ 294MKDIR_P = @MKDIR_P@ 295NM = @NM@ 296NMEDIT = @NMEDIT@ 297OBJDUMP = @OBJDUMP@ 298OBJEXT = @OBJEXT@ 299OTOOL = @OTOOL@ 300OTOOL64 = @OTOOL64@ 301PACKAGE = @PACKAGE@ 302PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 303PACKAGE_NAME = @PACKAGE_NAME@ 304PACKAGE_STRING = @PACKAGE_STRING@ 305PACKAGE_TARNAME = @PACKAGE_TARNAME@ 306PACKAGE_URL = @PACKAGE_URL@ 307PACKAGE_VERSION = @PACKAGE_VERSION@ 308PATH_SEPARATOR = @PATH_SEPARATOR@ 309PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@ 310PCIACCESS_LIBS = @PCIACCESS_LIBS@ 311PKG_CONFIG = @PKG_CONFIG@ 312PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ 313PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ 314RANLIB = @RANLIB@ 315SED = @SED@ 316SET_MAKE = @SET_MAKE@ 317SHELL = @SHELL@ 318STRICT_CFLAGS = @STRICT_CFLAGS@ 319STRIP = @STRIP@ 320VERSION = @VERSION@ 321XEXT_CFLAGS = @XEXT_CFLAGS@ 322XEXT_LIBS = @XEXT_LIBS@ 323XORG_CFLAGS = @XORG_CFLAGS@ 324XORG_LIBS = @XORG_LIBS@ 325XORG_MAN_PAGE = @XORG_MAN_PAGE@ 326abs_builddir = @abs_builddir@ 327abs_srcdir = @abs_srcdir@ 328abs_top_builddir = @abs_top_builddir@ 329abs_top_srcdir = @abs_top_srcdir@ 330ac_ct_AR = @ac_ct_AR@ 331ac_ct_CC = @ac_ct_CC@ 332ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 333am__include = @am__include@ 334am__leading_dot = @am__leading_dot@ 335am__quote = @am__quote@ 336am__tar = @am__tar@ 337am__untar = @am__untar@ 338bindir = @bindir@ 339build = @build@ 340build_alias = @build_alias@ 341build_cpu = @build_cpu@ 342build_os = @build_os@ 343build_vendor = @build_vendor@ 344builddir = @builddir@ 345datadir = @datadir@ 346datarootdir = @datarootdir@ 347docdir = @docdir@ 348dvidir = @dvidir@ 349exec_prefix = @exec_prefix@ 350host = @host@ 351host_alias = @host_alias@ 352host_cpu = @host_cpu@ 353host_os = @host_os@ 354host_vendor = @host_vendor@ 355htmldir = @htmldir@ 356includedir = @includedir@ 357infodir = @infodir@ 358install_sh = @install_sh@ 359libdir = @libdir@ 360libexecdir = @libexecdir@ 361localedir = @localedir@ 362localstatedir = @localstatedir@ 363mandir = @mandir@ 364mkdir_p = @mkdir_p@ 365moduledir = @moduledir@ 366oldincludedir = @oldincludedir@ 367pdfdir = @pdfdir@ 368prefix = @prefix@ 369program_transform_name = @program_transform_name@ 370psdir = @psdir@ 371sbindir = @sbindir@ 372sharedstatedir = @sharedstatedir@ 373srcdir = @srcdir@ 374sysconfdir = @sysconfdir@ 375target_alias = @target_alias@ 376top_build_prefix = @top_build_prefix@ 377top_builddir = @top_builddir@ 378top_srcdir = @top_srcdir@ 379ACLOCAL_AMFLAGS = -I m4 380SUBDIRS = src man 381MAINTAINERCLEANFILES = ChangeLog INSTALL 382EXTRA_DIST = ChangeLog INSTALL 383all: config.h 384 $(MAKE) $(AM_MAKEFLAGS) all-recursive 385 386.SUFFIXES: 387am--refresh: Makefile 388 @: 389$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 390 @for dep in $?; do \ 391 case '$(am__configure_deps)' in \ 392 *$$dep*) \ 393 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 394 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 395 && exit 0; \ 396 exit 1;; \ 397 esac; \ 398 done; \ 399 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 400 $(am__cd) $(top_srcdir) && \ 401 $(AUTOMAKE) --foreign Makefile 402Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 403 @case '$?' in \ 404 *config.status*) \ 405 echo ' $(SHELL) ./config.status'; \ 406 $(SHELL) ./config.status;; \ 407 *) \ 408 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ 409 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ 410 esac; 411 412$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 413 $(SHELL) ./config.status --recheck 414 415$(top_srcdir)/configure: $(am__configure_deps) 416 $(am__cd) $(srcdir) && $(AUTOCONF) 417$(ACLOCAL_M4): $(am__aclocal_m4_deps) 418 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 419$(am__aclocal_m4_deps): 420 421config.h: stamp-h1 422 @test -f $@ || rm -f stamp-h1 423 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 424 425stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 426 @rm -f stamp-h1 427 cd $(top_builddir) && $(SHELL) ./config.status config.h 428$(srcdir)/config.h.in: $(am__configure_deps) 429 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 430 rm -f stamp-h1 431 touch $@ 432 433distclean-hdr: 434 -rm -f config.h stamp-h1 435 436mostlyclean-libtool: 437 -rm -f *.lo 438 439clean-libtool: 440 -rm -rf .libs _libs 441 442distclean-libtool: 443 -rm -f libtool config.lt 444 445# This directory's subdirectories are mostly independent; you can cd 446# into them and run 'make' without going through this Makefile. 447# To change the values of 'make' variables: instead of editing Makefiles, 448# (1) if the variable is set in 'config.status', edit 'config.status' 449# (which will cause the Makefiles to be regenerated when you run 'make'); 450# (2) otherwise, pass the desired values on the 'make' command line. 451$(am__recursive_targets): 452 @fail=; \ 453 if $(am__make_keepgoing); then \ 454 failcom='fail=yes'; \ 455 else \ 456 failcom='exit 1'; \ 457 fi; \ 458 dot_seen=no; \ 459 target=`echo $@ | sed s/-recursive//`; \ 460 case "$@" in \ 461 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 462 *) list='$(SUBDIRS)' ;; \ 463 esac; \ 464 for subdir in $$list; do \ 465 echo "Making $$target in $$subdir"; \ 466 if test "$$subdir" = "."; then \ 467 dot_seen=yes; \ 468 local_target="$$target-am"; \ 469 else \ 470 local_target="$$target"; \ 471 fi; \ 472 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 473 || eval $$failcom; \ 474 done; \ 475 if test "$$dot_seen" = "no"; then \ 476 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 477 fi; test -z "$$fail" 478 479ID: $(am__tagged_files) 480 $(am__define_uniq_tagged_files); mkid -fID $$unique 481tags: tags-recursive 482TAGS: tags 483 484tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 485 set x; \ 486 here=`pwd`; \ 487 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 488 include_option=--etags-include; \ 489 empty_fix=.; \ 490 else \ 491 include_option=--include; \ 492 empty_fix=; \ 493 fi; \ 494 list='$(SUBDIRS)'; for subdir in $$list; do \ 495 if test "$$subdir" = .; then :; else \ 496 test ! -f $$subdir/TAGS || \ 497 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 498 fi; \ 499 done; \ 500 $(am__define_uniq_tagged_files); \ 501 shift; \ 502 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 503 test -n "$$unique" || unique=$$empty_fix; \ 504 if test $$# -gt 0; then \ 505 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 506 "$$@" $$unique; \ 507 else \ 508 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 509 $$unique; \ 510 fi; \ 511 fi 512ctags: ctags-recursive 513 514CTAGS: ctags 515ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 516 $(am__define_uniq_tagged_files); \ 517 test -z "$(CTAGS_ARGS)$$unique" \ 518 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 519 $$unique 520 521GTAGS: 522 here=`$(am__cd) $(top_builddir) && pwd` \ 523 && $(am__cd) $(top_srcdir) \ 524 && gtags -i $(GTAGS_ARGS) "$$here" 525cscope: cscope.files 526 test ! -s cscope.files \ 527 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 528clean-cscope: 529 -rm -f cscope.files 530cscope.files: clean-cscope cscopelist 531cscopelist: cscopelist-recursive 532 533cscopelist-am: $(am__tagged_files) 534 list='$(am__tagged_files)'; \ 535 case "$(srcdir)" in \ 536 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 537 *) sdir=$(subdir)/$(srcdir) ;; \ 538 esac; \ 539 for i in $$list; do \ 540 if test -f "$$i"; then \ 541 echo "$(subdir)/$$i"; \ 542 else \ 543 echo "$$sdir/$$i"; \ 544 fi; \ 545 done >> $(top_builddir)/cscope.files 546 547distclean-tags: 548 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 549 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 550 551distdir: $(BUILT_SOURCES) 552 $(MAKE) $(AM_MAKEFLAGS) distdir-am 553 554distdir-am: $(DISTFILES) 555 $(am__remove_distdir) 556 test -d "$(distdir)" || mkdir "$(distdir)" 557 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 558 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 559 list='$(DISTFILES)'; \ 560 dist_files=`for file in $$list; do echo $$file; done | \ 561 sed -e "s|^$$srcdirstrip/||;t" \ 562 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 563 case $$dist_files in \ 564 */*) $(MKDIR_P) `echo "$$dist_files" | \ 565 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 566 sort -u` ;; \ 567 esac; \ 568 for file in $$dist_files; do \ 569 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 570 if test -d $$d/$$file; then \ 571 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 572 if test -d "$(distdir)/$$file"; then \ 573 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 574 fi; \ 575 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 576 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 577 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 578 fi; \ 579 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 580 else \ 581 test -f "$(distdir)/$$file" \ 582 || cp -p $$d/$$file "$(distdir)/$$file" \ 583 || exit 1; \ 584 fi; \ 585 done 586 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 587 if test "$$subdir" = .; then :; else \ 588 $(am__make_dryrun) \ 589 || test -d "$(distdir)/$$subdir" \ 590 || $(MKDIR_P) "$(distdir)/$$subdir" \ 591 || exit 1; \ 592 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 593 $(am__relativize); \ 594 new_distdir=$$reldir; \ 595 dir1=$$subdir; dir2="$(top_distdir)"; \ 596 $(am__relativize); \ 597 new_top_distdir=$$reldir; \ 598 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 599 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 600 ($(am__cd) $$subdir && \ 601 $(MAKE) $(AM_MAKEFLAGS) \ 602 top_distdir="$$new_top_distdir" \ 603 distdir="$$new_distdir" \ 604 am__remove_distdir=: \ 605 am__skip_length_check=: \ 606 am__skip_mode_fix=: \ 607 distdir) \ 608 || exit 1; \ 609 fi; \ 610 done 611 -test -n "$(am__skip_mode_fix)" \ 612 || find "$(distdir)" -type d ! -perm -755 \ 613 -exec chmod u+rwx,go+rx {} \; -o \ 614 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 615 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 616 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 617 || chmod -R a+r "$(distdir)" 618dist-gzip: distdir 619 tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz 620 $(am__post_remove_distdir) 621dist-bzip2: distdir 622 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 623 $(am__post_remove_distdir) 624 625dist-lzip: distdir 626 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 627 $(am__post_remove_distdir) 628 629dist-xz: distdir 630 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 631 $(am__post_remove_distdir) 632 633dist-tarZ: distdir 634 @echo WARNING: "Support for distribution archives compressed with" \ 635 "legacy program 'compress' is deprecated." >&2 636 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 637 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 638 $(am__post_remove_distdir) 639 640dist-shar: distdir 641 @echo WARNING: "Support for shar distribution archives is" \ 642 "deprecated." >&2 643 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 644 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz 645 $(am__post_remove_distdir) 646 647dist-zip: distdir 648 -rm -f $(distdir).zip 649 zip -rq $(distdir).zip $(distdir) 650 $(am__post_remove_distdir) 651 652dist dist-all: 653 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 654 $(am__post_remove_distdir) 655 656# This target untars the dist file and tries a VPATH configuration. Then 657# it guarantees that the distribution is self-contained by making another 658# tarfile. 659distcheck: dist 660 case '$(DIST_ARCHIVES)' in \ 661 *.tar.gz*) \ 662 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ 663 *.tar.bz2*) \ 664 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 665 *.tar.lz*) \ 666 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 667 *.tar.xz*) \ 668 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 669 *.tar.Z*) \ 670 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 671 *.shar.gz*) \ 672 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ 673 *.zip*) \ 674 unzip $(distdir).zip ;;\ 675 esac 676 chmod -R a-w $(distdir) 677 chmod u+w $(distdir) 678 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst 679 chmod a-w $(distdir) 680 test -d $(distdir)/_build || exit 0; \ 681 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 682 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 683 && am__cwd=`pwd` \ 684 && $(am__cd) $(distdir)/_build/sub \ 685 && ../../configure \ 686 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 687 $(DISTCHECK_CONFIGURE_FLAGS) \ 688 --srcdir=../.. --prefix="$$dc_install_base" \ 689 && $(MAKE) $(AM_MAKEFLAGS) \ 690 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 691 && $(MAKE) $(AM_MAKEFLAGS) check \ 692 && $(MAKE) $(AM_MAKEFLAGS) install \ 693 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 694 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 695 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 696 distuninstallcheck \ 697 && chmod -R a-w "$$dc_install_base" \ 698 && ({ \ 699 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 700 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 701 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 702 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 703 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 704 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 705 && rm -rf "$$dc_destdir" \ 706 && $(MAKE) $(AM_MAKEFLAGS) dist \ 707 && rm -rf $(DIST_ARCHIVES) \ 708 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 709 && cd "$$am__cwd" \ 710 || exit 1 711 $(am__post_remove_distdir) 712 @(echo "$(distdir) archives ready for distribution: "; \ 713 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 714 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 715distuninstallcheck: 716 @test -n '$(distuninstallcheck_dir)' || { \ 717 echo 'ERROR: trying to run $@ with an empty' \ 718 '$$(distuninstallcheck_dir)' >&2; \ 719 exit 1; \ 720 }; \ 721 $(am__cd) '$(distuninstallcheck_dir)' || { \ 722 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 723 exit 1; \ 724 }; \ 725 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 726 || { echo "ERROR: files left after uninstall:" ; \ 727 if test -n "$(DESTDIR)"; then \ 728 echo " (check DESTDIR support)"; \ 729 fi ; \ 730 $(distuninstallcheck_listfiles) ; \ 731 exit 1; } >&2 732distcleancheck: distclean 733 @if test '$(srcdir)' = . ; then \ 734 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 735 exit 1 ; \ 736 fi 737 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 738 || { echo "ERROR: files left in build directory after distclean:" ; \ 739 $(distcleancheck_listfiles) ; \ 740 exit 1; } >&2 741check-am: all-am 742check: check-recursive 743all-am: Makefile config.h 744installdirs: installdirs-recursive 745installdirs-am: 746install: install-recursive 747install-exec: install-exec-recursive 748install-data: install-data-recursive 749uninstall: uninstall-recursive 750 751install-am: all-am 752 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 753 754installcheck: installcheck-recursive 755install-strip: 756 if test -z '$(STRIP)'; then \ 757 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 758 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 759 install; \ 760 else \ 761 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 762 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 763 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 764 fi 765mostlyclean-generic: 766 767clean-generic: 768 769distclean-generic: 770 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 771 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 772 773maintainer-clean-generic: 774 @echo "This command is intended for maintainers to use" 775 @echo "it deletes files that may require special tools to rebuild." 776 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 777clean: clean-recursive 778 779clean-am: clean-generic clean-libtool mostlyclean-am 780 781distclean: distclean-recursive 782 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 783 -rm -f Makefile 784distclean-am: clean-am distclean-generic distclean-hdr \ 785 distclean-libtool distclean-tags 786 787dvi: dvi-recursive 788 789dvi-am: 790 791html: html-recursive 792 793html-am: 794 795info: info-recursive 796 797info-am: 798 799install-data-am: 800 801install-dvi: install-dvi-recursive 802 803install-dvi-am: 804 805install-exec-am: 806 807install-html: install-html-recursive 808 809install-html-am: 810 811install-info: install-info-recursive 812 813install-info-am: 814 815install-man: 816 817install-pdf: install-pdf-recursive 818 819install-pdf-am: 820 821install-ps: install-ps-recursive 822 823install-ps-am: 824 825installcheck-am: 826 827maintainer-clean: maintainer-clean-recursive 828 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 829 -rm -rf $(top_srcdir)/autom4te.cache 830 -rm -f Makefile 831maintainer-clean-am: distclean-am maintainer-clean-generic 832 833mostlyclean: mostlyclean-recursive 834 835mostlyclean-am: mostlyclean-generic mostlyclean-libtool 836 837pdf: pdf-recursive 838 839pdf-am: 840 841ps: ps-recursive 842 843ps-am: 844 845uninstall-am: 846 847.MAKE: $(am__recursive_targets) all install-am install-strip 848 849.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 850 am--refresh check check-am clean clean-cscope clean-generic \ 851 clean-libtool cscope cscopelist-am ctags ctags-am dist \ 852 dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \ 853 dist-xz dist-zip distcheck distclean distclean-generic \ 854 distclean-hdr distclean-libtool distclean-tags distcleancheck \ 855 distdir distuninstallcheck dvi dvi-am html html-am info \ 856 info-am install install-am install-data install-data-am \ 857 install-dvi install-dvi-am install-exec install-exec-am \ 858 install-html install-html-am install-info install-info-am \ 859 install-man install-pdf install-pdf-am install-ps \ 860 install-ps-am install-strip installcheck installcheck-am \ 861 installdirs installdirs-am maintainer-clean \ 862 maintainer-clean-generic mostlyclean mostlyclean-generic \ 863 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ 864 uninstall-am 865 866.PRECIOUS: Makefile 867 868 869.PHONY: ChangeLog INSTALL 870 871INSTALL: 872 $(INSTALL_CMD) 873 874ChangeLog: 875 $(CHANGELOG_CMD) 876 877# Tell versions [3.59,3.63) of GNU make to not export all variables. 878# Otherwise a system limit (for SysV at least) may be exceeded. 879.NOEXPORT: 880