| History log of /src/sys/dev/fdt/cpufreq_dt.c |
| Revision | | Date | Author | Comments |
| 1.20 |
| 06-Sep-2025 |
thorpej | Re-factor the operating point defintions into fdt_opp.h
|
| 1.19 |
| 22-Feb-2021 |
ryo | It is more appropriate to use clk_get_rate() rather than sc->sc_freq_target * 1000000.
ci_data.cpu_cc_freq should be set to a higher precision value.
In addition, when cpufreq_dt_init(), or while throttling, sc->sc_freq_target should not
be referenced by cpufreq_dt_change_cb() because it does not have the correct value.
|
| 1.18 |
| 27-Jan-2021 |
thorpej | Rename of_match_compat_data() to of_compatible_match(). Similarly,
rename of_search_compatible() to of_compatible_lookup().
Standardize on of_compatible_match() for driver matching, and adapt
all call sites.
|
| 1.17 |
| 03-Jun-2020 |
jmcneill | branches: 1.17.2;
Re-enable "set cpufreq at boot" code.
|
| 1.16 |
| 03-Jun-2020 |
jmcneill | Disable setting cpufreq at boot for now
|
| 1.15 |
| 03-Jun-2020 |
jmcneill | Highest speed is first opp, not last
|
| 1.14 |
| 02-Jun-2020 |
jmcneill | Select the highest rate at boot, and update cycle counter frequency when rates change
|
| 1.13 |
| 29-Oct-2019 |
jmcneill | Add explicit FDT_OPP for operating-points-v2 so the link set won't be empty
|
| 1.12 |
| 28-Oct-2019 |
jmcneill | Add support for platform specific opp table filters.
|
| 1.11 |
| 28-Oct-2019 |
jmcneill | Skip nodes with an "opp-suspend" property and fix tables that have disabled
nodes in the middle.
|
| 1.10 |
| 07-Oct-2019 |
martin | Fix argument to fdtbus_get_reg, from Jared.
|
| 1.9 |
| 06-Oct-2019 |
jmcneill | Change sysctl to be named after the first CPU in the DVFS domain.
old: machdep.cpu.frequency.*, machdep.cpufreqdt4.frequency.*
new: machdep.cpufreq.cpu0.*, machdep.cpufreq.cpu4.*
|
| 1.8 |
| 21-May-2019 |
jmcneill | branches: 1.8.2;
opp-v2 table seems to list opps from lowest to highest, so swap the order to ensure the highest frequency is first
|
| 1.7 |
| 01-Nov-2018 |
jmcneill | Support for "opp-microvolt" with more than one cell
|
| 1.6 |
| 20-Sep-2018 |
jmcneill | Use machdep.cpu for the first instance
|
| 1.5 |
| 01-Sep-2018 |
jmcneill | Don't print an error message for shared opp tables
|
| 1.4 |
| 01-Sep-2018 |
jmcneill | Add support for opp-v2 tables and multiple instances of the cpufreqdt
driver.
|
| 1.3 |
| 16-Dec-2017 |
jmcneill | branches: 1.3.2; 1.3.4;
Support cpu nodes without a cpu-supply property.
|
| 1.2 |
| 05-Oct-2017 |
jmcneill | branches: 1.2.2;
Listen for PMFE_THROTTLE_* events and limit CPU frequency when throttling
is enabled.
|
| 1.1 |
| 02-Oct-2017 |
jmcneill | Add generic DT cpu frequency and voltage scaling driver.
|
| 1.2.2.2 |
| 03-Dec-2017 |
jdolecek | update from HEAD
|
| 1.2.2.1 |
| 05-Oct-2017 |
jdolecek | file cpufreq_dt.c was added on branch tls-maxphys on 2017-12-03 11:37:01 +0000
|
| 1.3.4.2 |
| 13-Apr-2020 |
martin | Mostly merge changes from HEAD upto 20200411
|
| 1.3.4.1 |
| 10-Jun-2019 |
christos | Sync with HEAD
|
| 1.3.2.3 |
| 26-Nov-2018 |
pgoyette | Sync with HEAD, resolve a couple of conflicts
|
| 1.3.2.2 |
| 30-Sep-2018 |
pgoyette | Ssync with HEAD
|
| 1.3.2.1 |
| 06-Sep-2018 |
pgoyette | Sync with HEAD
Resolve a couple of conflicts (result of the uimin/uimax changes)
|
| 1.8.2.2 |
| 27-Nov-2019 |
martin | Pull up following revision(s) (requested by jmcneill in ticket #491):
sys/arch/evbarm/conf/BEAGLEBOARD_INSTALL: file removal
sys/arch/arm/ti/ti_dpll_clock.c: revision 1.2
sys/arch/arm/ti/ti_sysc.c: revision 1.1
sys/arch/arm/ti/ti_rng.c: revision 1.1
sys/arch/arm/ti/ti_rng.c: revision 1.2
sys/dev/i2c/tps65950.c: file removal
sys/arch/evbarm/conf/std.ti: file removal
sys/dev/i2c/files.i2c: revision 1.101
sys/dev/i2c/files.i2c: revision 1.102
sys/dev/i2c/at24cxx.c: revision 1.32
sys/dev/i2c/files.i2c: revision 1.103
sys/dev/i2c/twl4030.c: revision 1.1
sys/dev/i2c/files.i2c: revision 1.104
sys/dev/i2c/twl4030.c: revision 1.2
sys/dev/i2c/twl4030.c: revision 1.3
sys/arch/arm/ti/ti_com.c: revision 1.6
sys/arch/arm/ti/ti_com.c: revision 1.7
sys/arch/arm/ti/ti_com.c: revision 1.8
sys/dev/fdt/cpufreq_dt.c: revision 1.11
sys/arch/arm/ti/ti_iic.c: revision 1.1
sys/dev/fdt/cpufreq_dt.c: revision 1.12
sys/arch/arm/ti/ti_usb.c: revision 1.1
sys/arch/arm/ti/ti_iic.c: revision 1.2
sys/dev/fdt/cpufreq_dt.c: revision 1.13
sys/arch/arm/ti/ti_iic.c: revision 1.3
sys/arch/arm/ti/ti_iic.c: revision 1.4
sys/arch/evbarm/conf/files.ti: file removal
sys/arch/evbarm/conf/BEAGLEBOARDXM: file removal
sys/arch/arm/dts/omap3-n900.dts: revision 1.1
sys/arch/arm/ti/ti_edma.h: revision 1.1
sys/arch/evbarm/conf/OVERO_INSTALL: file removal
sys/arch/arm/ti/ti_usbtll.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.5
etc/etc.evbarm/Makefile.inc: revision 1.108
sys/arch/arm/ti/files.ti: revision 1.6
sys/dev/i2c/tps65217pmic.c: revision 1.13
etc/etc.evbarm/Makefile.inc: revision 1.109
sys/arch/arm/ti/files.ti: revision 1.7
sys/dev/i2c/tps65217pmic.c: revision 1.14
sys/arch/arm/ti/files.ti: revision 1.8
sys/arch/arm/ti/files.ti: revision 1.9
sys/dev/fdt/usbnopphy.c: revision 1.1
sys/arch/evbarm/conf/GENERIC: revision 1.55
sys/arch/evbarm/conf/GENERIC: revision 1.56
sys/arch/evbarm/conf/GENERIC: revision 1.57
sys/arch/evbarm/conf/GENERIC: revision 1.58
sys/arch/evbarm/conf/GENERIC: revision 1.59
sys/arch/evbarm/conf/BEAGLEBONE: file removal
sys/arch/arm/ti/omap2_gpmcreg.h: revision 1.1
sys/arch/arm/ti/ti_otgreg.h: revision 1.1
sys/arch/arm/ti/ti_tptc.c: revision 1.1
sys/arch/evbarm/conf/IGEPV2: file removal
sys/arch/arm/ti/am3_prcm.c: revision 1.10
sys/dev/i2c/tda19988.c: revision 1.1
sys/arch/evbarm/conf/OVERO: file removal
sys/dev/i2c/tda19988.c: revision 1.2
sys/dev/i2c/tda19988.c: revision 1.3
sys/arch/arm/ti/omap3_dss.c: revision 1.1
sys/arch/evbarm/conf/BEAGLEBONE_INSTALL: file removal
sys/arch/arm/ti/ti_omapintc.c: revision 1.2
etc/etc.evbarm/Makefile.inc: revision 1.112
etc/etc.evbarm/Makefile.inc: revision 1.113
sys/arch/arm/ti/ti_div_clock.c: revision 1.1
etc/etc.evbarm/Makefile.inc: revision 1.114
sys/arch/evbarm/conf/N900: revision 1.32
sys/arch/evbarm/conf/N900: revision 1.33
distrib/utils/embedded/conf/armv7.conf: revision 1.36
sys/arch/evbarm/conf/GENERIC: revision 1.60
distrib/utils/embedded/conf/armv7.conf: revision 1.37
sys/arch/arm/ti/omap2_nand.c: revision 1.1
sys/arch/evbarm/conf/GENERIC: revision 1.61
sys/arch/arm/ti/omap2_nand.c: revision 1.2
sys/arch/evbarm/conf/GENERIC: revision 1.62
distrib/utils/embedded/conf/armv7.conf: revision 1.39
sys/arch/evbarm/conf/GENERIC: revision 1.63
sys/arch/arm/ti/ti_fb.c: revision 1.1
sys/arch/evbarm/conf/GENERIC: revision 1.64
sys/arch/evbarm/conf/GENERIC: revision 1.65
sys/arch/evbarm/conf/GENERIC: revision 1.66
sys/arch/evbarm/conf/GENERIC: revision 1.67
sys/arch/arm/ti/ti_platform.c: revision 1.7
sys/arch/arm/ti/ti_platform.c: revision 1.8
sys/arch/arm/ti/am3_prcm.c: revision 1.2
sys/arch/arm/ti/ti_platform.c: revision 1.9
sys/arch/arm/ti/am3_prcm.c: revision 1.3
sys/arch/arm/ti/am3_prcm.c: revision 1.4
sys/arch/arm/ti/am3_prcm.c: revision 1.5
sys/arch/arm/ti/am3_prcm.c: revision 1.6
sys/arch/arm/ti/am3_prcm.c: revision 1.7
sys/arch/evbarm/conf/DEVKIT8000: file removal
sys/arch/arm/ti/am3_prcm.c: revision 1.8
sys/arch/arm/ti/am3_prcm.c: revision 1.9
sys/dev/fdt/syscon.c: revision 1.4
sys/arch/arm/ti/files.ti: revision 1.10
sys/arch/arm/ti/ti_mux_clock.c: revision 1.1
sys/arch/arm/ti/ti_sdhc.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.11
sys/arch/arm/ti/if_cpswreg.h: revision 1.1
sys/arch/arm/ti/ti_sdhc.c: revision 1.2
sys/arch/arm/ti/files.ti: revision 1.12
sys/arch/arm/ti/ti_sdhc.c: revision 1.3
sys/arch/arm/ti/files.ti: revision 1.13
sys/arch/arm/ti/files.ti: revision 1.14
sys/arch/arm/ti/files.ti: revision 1.15
sys/arch/arm/ti/files.ti: revision 1.16
sys/arch/arm/ti/omap3_cm.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.17
sys/arch/arm/ti/omap3_cm.c: revision 1.2
sys/arch/arm/ti/files.ti: revision 1.18
sys/arch/arm/ti/omap3_cm.c: revision 1.3
sys/arch/arm/ti/files.ti: revision 1.19
sys/arch/arm/ti/omap3_cm.c: revision 1.4
sys/arch/arm/ti/ti_motg.c: revision 1.1
sys/arch/arm/ti/ti_rngreg.h: revision 1.1
sys/arch/arm/ti/ti_sdhcreg.h: revision 1.1
sys/arch/arm/dts/omap3-beagle-xm.dts: revision 1.1
sys/arch/arm/ti/am3_platform.c: revision 1.1
sys/arch/arm/ti/ti_sdhcreg.h: revision 1.2
sys/arch/arm/ti/ti_lcdc.h: revision 1.1
sys/arch/evbarm/conf/BEAGLEBOARDXM_INSTALL: file removal
sys/arch/evbarm/conf/README.evbarm: revision 1.22
sys/arch/evbarm/conf/README.evbarm: revision 1.23
sys/arch/arm/ti/ti_platform.c: file removal
sys/arch/evbarm/conf/README.evbarm: revision 1.24
sys/arch/arm/ti/ti_omaptimer.c: revision 1.2
sys/arch/arm/ti/ti_prcm.c: revision 1.2
sys/arch/evbarm/conf/README.evbarm: revision 1.25
sys/arch/arm/ti/ti_omaptimer.c: revision 1.3
sys/arch/arm/ti/ti_prcm.c: revision 1.3
sys/arch/evbarm/conf/README.evbarm: revision 1.26
sys/arch/arm/ti/ti_omaptimer.c: revision 1.4
sys/arch/evbarm/conf/README.evbarm: revision 1.27
sys/arch/arm/ti/ti_ehci.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.20
sys/arch/arm/ti/ti_cpufreq.c: revision 1.1
sys/arch/arm/ti/ti_cpufreq.c: revision 1.2
sys/arch/arm/fdt/smsh_fdt.c: revision 1.2
sys/arch/arm/ti/omap3_dssreg.h: revision 1.1
sys/arch/evbarm/conf/OVERO: revision 1.56
sys/arch/evbarm/conf/TI: file removal
sys/arch/arm/dts/omap3-beagle.dts: revision 1.1
sys/dev/fdt/fdtvar.h: revision 1.55
sys/dev/fdt/fdtvar.h: revision 1.56
distrib/utils/embedded/files/armv7_boot_nonefi.cmd: revision 1.2
sys/dev/fdt/fdt_phy.c: revision 1.6
sys/arch/arm/ti/ti_iicreg.h: revision 1.1
sys/arch/arm/ti/ti_lcdc.c: revision 1.1
sys/arch/arm/ti/ti_gpio.c: revision 1.1
sys/arch/arm/ti/ti_iicreg.h: revision 1.2
sys/arch/arm/ti/ti_lcdc.c: revision 1.2
sys/dev/fdt/files.fdt: revision 1.46
sys/arch/arm/ti/ti_gpio.c: revision 1.2
sys/arch/arm/ti/ti_iicreg.h: revision 1.3
sys/arch/arm/ti/ti_lcdc.c: revision 1.3
sys/dev/fdt/files.fdt: revision 1.47
sys/arch/arm/ti/ti_gpio.c: revision 1.3
sys/dev/fdt/pinctrl_single.c: revision 1.1
sys/arch/evbarm/conf/files.generic: revision 1.9
sys/arch/arm/ti/ti_gpmc.c: revision 1.1
sys/arch/arm/ti/ti_lcdcreg.h: revision 1.1
sys/arch/evbarm/conf/BEAGLEBOARD: file removal
sys/arch/arm/ti/omap3_prm.c: revision 1.1
sys/arch/arm/ti/ti_platform.h: file removal
sys/arch/arm/ti/omap3_platform.c: revision 1.1
sys/arch/arm/ti/ti_prcm.h: revision 1.2
sys/arch/arm/ti/omap3_platform.c: revision 1.2
sys/arch/arm/ti/ti_prcm.h: revision 1.3
sys/arch/arm/ti/ti_prcm.h: revision 1.4
sys/dev/fdt/fdt_clock.c: revision 1.9
sys/arch/arm/ti/ti_edma.c: revision 1.1
sys/arch/arm/ti/ti_otg.c: revision 1.1
distrib/utils/embedded/files/armv7_boot.cmd: revision 1.15
sys/arch/arm/ti/if_cpsw.c: revision 1.7
sys/arch/evbarm/conf/std.igepv2: file removal
sys/arch/arm/ti/if_cpsw.c: revision 1.8
sys/arch/arm/ti/ti_dpll_clock.c: revision 1.1
Adapt ti fdt glue to support GENERIC kernel.
Do not search 64-bit directories for dts files
Fix am33xx_platform_early_putchar for pre-MMU output
Add bus driver for TI sysc interconncet.
Make com work again
Add EDMA TPCC and TPTC drivers.
Add driver for one-register-per-pin type pinctrl devices.
Add MMCHS support.
Add USB support.
Disable autoidle
Place devmap above KERNEL_IO_VBASE
Use Timer2 for timecounter, and enable hw module.
Add support for TI AM335x
Add atmel,24c256 compat data
Add I2C support.
Add tiiic, tps65217pmic
Add FDT support
Fix early putchar, add reset func
No support for tegra210 in armv7 kernel
Switch to GENERIC kernels only.
Get mac address from DT
Skip nodes with an "opp-suspend" property and fix tables that have disabled
nodes in the middle.
enumerate devices under child "clocks" node
Add support for platform specific opp table filters.
Add fdtbus_clock_count to count the number of clock references on a given node
enumerate devices under child "clocks" node
Add AM335x DVFS support.
Enable TI AM335x DVFS support
Add support for GPIO controller.
Add tigpio
Unhook BEAGLEBONE kernel from the build
Remove BEAGLEBONE kernel config (AM335x SoC is supported by GENERIC now).
Add support for hardware RNG.
Add tirng
Add explicit FDT_OPP for operating-points-v2 so the link set won't be empty
Rename SOC_TI_AM335X to SOC_AM33XX and rename ti_platform.c to
am3_platform.c
Set stdout-path on TI OMAP3 BeagleBoard
Add support for TI OMAP3.
Add OMAP3 support.
Move a lot of *.dtb files to a dtb/ subdirectory on the FAT partition.
Mkimage (eroneously) creates a FAT16 partition (despite the configuration
asking for FAT32), and that has a root directory size limit.
Idea from Jared.
Skip xref if it is 0
Add generic USB PHY driver
Add driver for TI TWL4030 Power Management IC
Use the hwmod clk to get the timer rate and explicitly enable the
timecounter timer.
Add OMAP3 USB support.
Add twl, usbnopphy, tiusb, tiusbtll
Move omap3 dtb files to /boot/dtb
Remove BEAGLEBOARD kernel from list of kernels to build
Remove BEAGLEBOARD kernel (supported by GENERIC now)
Fix PRM_RSTCTRL_RST_DPLL3 definition, now reset works.
Remove DEVKIT8000 kernel (GENERIC should work now)
Remove DPLL5 init ported from old omap code, it is not required
Set the stdout-path on xM like Ti OMAP3 BeagleBoard
Remove BEAGLEBOARDXM from the build
Remove BEAGLEBOARDXM kernel (supported by GENERIC now)
Handle different register layout on OMAP3
Add omapfb to FDT-ized TI port.
Use dss as console on Nokia N900.
Enable IRQ status bits for omap3 type and set speed properly
Add RTC support
Remove tps65950pm (hardware now supported by twl4030.c)
Add NAND flash support.
Add tigpmc, omapnand
Attach tiusb before the default pass since it adds a bus to reduce kernel output
Replace tps65950pm with twl (the former has been removed)
Fix non-FDT build
Cleanup and remove dependency on arch/arm/omap
Add support for GPIO interrupts and fix reading the state of output pins.
Match smsc,lan9115 and honour local-mac-address/mac-address properties
Only one instance of twl(4) is needed
Remove OVERO from build, and commented out N900 kernel config
OMAP3 SoC and all peripherals in the OVERO kernel are now supported by
GENERIC.
Remove commented out IGEPV2 entry
OMAP3 SoC and all peripherals in the IGEPV2 kernel are now supported by
GENERIC.
No longer used.
Also match ti,omap2-onenand
Defer power monitor polling to the sysmon taskq thread to avoid i2c transactions in intr context
Add driver for NXP TDA19988 HDMI encoder
Add support for AM335x display controller (LCDC).
Add tdahdmi, tilcdc, tifb
Test DRM_MODE_* flags, not VID_*
Comment out mode fixup (not needed it seems)
Use 297MHz for display clock
Select closest rate to desired pixel clock
Speed up mode setting a bit and turn off the display while changing modes
|
| 1.8.2.1 |
| 08-Oct-2019 |
martin | Pull up following revision(s) (requested by jmcneill in ticket #291):
sys/dev/fdt/cpufreq_dt.c: revision 1.9
sys/dev/fdt/cpufreq_dt.c: revision 1.10
Change sysctl to be named after the first CPU in the DVFS domain.
old: machdep.cpu.frequency.*, machdep.cpufreqdt4.frequency.*
new: machdep.cpufreq.cpu0.*, machdep.cpufreq.cpu4.*
|
| 1.17.2.1 |
| 03-Apr-2021 |
thorpej | Sync with HEAD.
|
