Searched +hist:1.12 +hist:10.1 (Results 1 - 25 of 28) sorted by relevance

12

/src/sys/arch/vax/vsa/
H A Dlcg.c1.13 Fri Feb 28 13:13:41 GMT 2025 hans vax/lcg(4): Check vax_siedata in lcg_match() and lcgcnprobe() as well.

LCG only exists on two specific VAXstation models, but not the MicroVAXen
sharing the same board type.

PR port-vax/59109: Booting 10.1 fails on Microvax 3100 model 80
1.12 Thu Feb 27 15:31:06 GMT 2025 riastradh vax/lcg(4): Fix device_t/softc split straggler.

PR port-vax/59109: Booting 10.1 fails on Microvax 3100 model 80

(Probably won't fix the immediate problem but might fix some related
ones.)
1.12 Thu Feb 27 15:31:06 GMT 2025 riastradh vax/lcg(4): Fix device_t/softc split straggler.

PR port-vax/59109: Booting 10.1 fails on Microvax 3100 model 80

(Probably won't fix the immediate problem but might fix some related
ones.)
/src/lib/libc/net/
H A Dip6opt.c1.15 Fri Feb 07 02:36:06 GMT 2014 christos RFC 3542 (section 10.1) states that optlen should only be checked when
opt != NULL (Eitan Adler)
1.12 Fri Jan 30 23:43:30 GMT 2009 lukem branches: 1.12.8;
sign-compare fix
1.12 Fri Jan 30 23:43:30 GMT 2009 lukem branches: 1.12.8;
sign-compare fix
H A Dgetnameinfo.c1.12 Thu Feb 17 17:06:17 GMT 2000 itojun to synchronize with progress of discussion for post
draft-ietf-ipngwg-scopedaddr-format-00.txt (will be 01),
use "address%interface" notation for extended scoped IPv6 address.

NOTE: the change affects link-local addresses only. I hope it to be
the final change on it.....
1.3 Sun Aug 01 06:45:28 GMT 1999 itojun - provide reverse query for mapped address (::ffff:10.1.1.1).
- NI_NUMERICHOST and NI_HOSTREQD conflict with each other,
so bark if there are both.
(sync with recent KAME)
/src/sys/arch/x86/x86/
H A Didentcpu_subr.c1.14 Fri May 02 07:08:11 GMT 2025 imil Add support for CPUID leaf 0x40000010 to detect TSC and LAPIC frequency on
hypervisors implementing the VMware-defined interface

This change enables virtual machines to obtain TSC and LAPIC frequency
information directly from the hypervisor via CPUID leaf 0x40000010, avoiding
the need for runtime calibration, thus reducing boot speed in supported
environments.

Tested on GENERIC and MICROVM kernels, QEMU/KVM and QEMU/NVMM (current and
10.1), Intel and AMD CPUs, NetBSD/amd64 and i386.
1.12 Thu Mar 06 09:31:05 GMT 2025 imil Allow tsc_freq_vmware_cpuid() for TSC frequency even if there is no LAPIC support
H A Dlapic.c1.93 Fri May 02 07:08:11 GMT 2025 imil Add support for CPUID leaf 0x40000010 to detect TSC and LAPIC frequency on
hypervisors implementing the VMware-defined interface

This change enables virtual machines to obtain TSC and LAPIC frequency
information directly from the hypervisor via CPUID leaf 0x40000010, avoiding
the need for runtime calibration, thus reducing boot speed in supported
environments.

Tested on GENERIC and MICROVM kernels, QEMU/KVM and QEMU/NVMM (current and
10.1), Intel and AMD CPUs, NetBSD/amd64 and i386.
1.12 Sun May 29 21:36:40 GMT 2005 christos branches: 1.12.2;
avoid variable shadowing.
1.12 Sun May 29 21:36:40 GMT 2005 christos branches: 1.12.2;
avoid variable shadowing.
/src/sys/arch/macppc/stand/ofwboot/
H A Dversion1.16 Mon Jan 13 17:33:10 GMT 2025 tsutsui Tweak bootpath strings in ofwboot for OpenBIOS used on qemu-system-ppc.

Bump version to denote the visible change.

This makes qemu-system-ppc -M mac99 booting from a harddisk image
using ofwboot installed by installboot(8) with /usr/mdec/bootxx:
---
% qemu-system-ppc --version
QEMU emulator version 9.1.2
Copyright (c) 2003-2024 Fabrice Bellard and the QEMU Project developers
% qemu-system-ppc -M mac99 -drive file=NetBSD-10.1-macppc.img,media=disk,format=raw -nographic

>> =============================================================
>> OpenBIOS 1.1 [Mar 7 2023 22:21]
>> Configuration device id QEMU version 1 machine id 1
>> CPUs: 1
>> Memory: 128M
>> UUID: 00000000-0000-0000-0000-000000000000
>> CPU type PowerPC,G4
milliseconds isn't unique.
Welcome to OpenBIOS v1.1 built on Mar 7 2023 22:21
Trying hd:,\\:tbxi...
Trying hd:,\ppc\bootinfo.txt...
Trying hd:,%BOOT...
>> Not a bootable ELF image
>> switching to new context:

OF_open bootpath=/pci@f2000000/mac-io@c/ata-3@20000/disk@0
read stage 2 blocks: 01234. done!
starting stage 2...

>> NetBSD/macppc OpenFirmware Boot, Revision 1.14 (Mon Jan 13 14:50:50 UTC 2025)
>> Open Firmware version 3.x
>> Open Firmware running in virtual-mode.
prom2boot: bootpath from OF: "/pci@f2000000/mac-io@c/ata-3@20000/disk@0:,%BOOT"
prom2boot: bootpath patched: "/pci@f2000000/mac-io@c/ata-3@20000/disk@0:"
bootline=
Trying /netbsd
11860332+167196 [463456+447084]=0xc570ec
start=0x100000
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024
[ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/macppc/compile/GENERIC
---
1.16 Mon Jan 13 17:33:10 GMT 2025 tsutsui Tweak bootpath strings in ofwboot for OpenBIOS used on qemu-system-ppc.

Bump version to denote the visible change.

This makes qemu-system-ppc -M mac99 booting from a harddisk image
using ofwboot installed by installboot(8) with /usr/mdec/bootxx:
---
% qemu-system-ppc --version
QEMU emulator version 9.1.2
Copyright (c) 2003-2024 Fabrice Bellard and the QEMU Project developers
% qemu-system-ppc -M mac99 -drive file=NetBSD-10.1-macppc.img,media=disk,format=raw -nographic

>> =============================================================
>> OpenBIOS 1.1 [Mar 7 2023 22:21]
>> Configuration device id QEMU version 1 machine id 1
>> CPUs: 1
>> Memory: 128M
>> UUID: 00000000-0000-0000-0000-000000000000
>> CPU type PowerPC,G4
milliseconds isn't unique.
Welcome to OpenBIOS v1.1 built on Mar 7 2023 22:21
Trying hd:,\\:tbxi...
Trying hd:,\ppc\bootinfo.txt...
Trying hd:,%BOOT...
>> Not a bootable ELF image
>> switching to new context:

OF_open bootpath=/pci@f2000000/mac-io@c/ata-3@20000/disk@0
read stage 2 blocks: 01234. done!
starting stage 2...

>> NetBSD/macppc OpenFirmware Boot, Revision 1.14 (Mon Jan 13 14:50:50 UTC 2025)
>> Open Firmware version 3.x
>> Open Firmware running in virtual-mode.
prom2boot: bootpath from OF: "/pci@f2000000/mac-io@c/ata-3@20000/disk@0:,%BOOT"
prom2boot: bootpath patched: "/pci@f2000000/mac-io@c/ata-3@20000/disk@0:"
bootline=
Trying /netbsd
11860332+167196 [463456+447084]=0xc570ec
start=0x100000
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024
[ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/macppc/compile/GENERIC
---
1.12 Wed Jan 28 15:03:28 GMT 2009 tsutsui branches: 1.12.4; 1.12.6;
- modify a pathname parse function to explicitly return devname and filename
- check floppyboot properly per devname before loadfile(), not in devopen()
- disable LOAD_NOTE on floppyboot to avoid backward seek
- bump revision

Tested floppy boot and IDE boot on Apus2000 with OpenFirmware 2.0.

Fixes PR install/38943 on macppc.
1.12 Wed Jan 28 15:03:28 GMT 2009 tsutsui branches: 1.12.4; 1.12.6;
- modify a pathname parse function to explicitly return devname and filename
- check floppyboot properly per devname before loadfile(), not in devopen()
- disable LOAD_NOTE on floppyboot to avoid backward seek
- bump revision

Tested floppy boot and IDE boot on Apus2000 with OpenFirmware 2.0.

Fixes PR install/38943 on macppc.
1.12 Wed Jan 28 15:03:28 GMT 2009 tsutsui branches: 1.12.4; 1.12.6;
- modify a pathname parse function to explicitly return devname and filename
- check floppyboot properly per devname before loadfile(), not in devopen()
- disable LOAD_NOTE on floppyboot to avoid backward seek
- bump revision

Tested floppy boot and IDE boot on Apus2000 with OpenFirmware 2.0.

Fixes PR install/38943 on macppc.
H A Dboot.c1.32 Mon Jan 13 17:33:10 GMT 2025 tsutsui Tweak bootpath strings in ofwboot for OpenBIOS used on qemu-system-ppc.

Bump version to denote the visible change.

This makes qemu-system-ppc -M mac99 booting from a harddisk image
using ofwboot installed by installboot(8) with /usr/mdec/bootxx:
---
% qemu-system-ppc --version
QEMU emulator version 9.1.2
Copyright (c) 2003-2024 Fabrice Bellard and the QEMU Project developers
% qemu-system-ppc -M mac99 -drive file=NetBSD-10.1-macppc.img,media=disk,format=raw -nographic

>> =============================================================
>> OpenBIOS 1.1 [Mar 7 2023 22:21]
>> Configuration device id QEMU version 1 machine id 1
>> CPUs: 1
>> Memory: 128M
>> UUID: 00000000-0000-0000-0000-000000000000
>> CPU type PowerPC,G4
milliseconds isn't unique.
Welcome to OpenBIOS v1.1 built on Mar 7 2023 22:21
Trying hd:,\\:tbxi...
Trying hd:,\ppc\bootinfo.txt...
Trying hd:,%BOOT...
>> Not a bootable ELF image
>> switching to new context:

OF_open bootpath=/pci@f2000000/mac-io@c/ata-3@20000/disk@0
read stage 2 blocks: 01234. done!
starting stage 2...

>> NetBSD/macppc OpenFirmware Boot, Revision 1.14 (Mon Jan 13 14:50:50 UTC 2025)
>> Open Firmware version 3.x
>> Open Firmware running in virtual-mode.
prom2boot: bootpath from OF: "/pci@f2000000/mac-io@c/ata-3@20000/disk@0:,%BOOT"
prom2boot: bootpath patched: "/pci@f2000000/mac-io@c/ata-3@20000/disk@0:"
bootline=
Trying /netbsd
11860332+167196 [463456+447084]=0xc570ec
start=0x100000
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024
[ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/macppc/compile/GENERIC
---
1.32 Mon Jan 13 17:33:10 GMT 2025 tsutsui Tweak bootpath strings in ofwboot for OpenBIOS used on qemu-system-ppc.

Bump version to denote the visible change.

This makes qemu-system-ppc -M mac99 booting from a harddisk image
using ofwboot installed by installboot(8) with /usr/mdec/bootxx:
---
% qemu-system-ppc --version
QEMU emulator version 9.1.2
Copyright (c) 2003-2024 Fabrice Bellard and the QEMU Project developers
% qemu-system-ppc -M mac99 -drive file=NetBSD-10.1-macppc.img,media=disk,format=raw -nographic

>> =============================================================
>> OpenBIOS 1.1 [Mar 7 2023 22:21]
>> Configuration device id QEMU version 1 machine id 1
>> CPUs: 1
>> Memory: 128M
>> UUID: 00000000-0000-0000-0000-000000000000
>> CPU type PowerPC,G4
milliseconds isn't unique.
Welcome to OpenBIOS v1.1 built on Mar 7 2023 22:21
Trying hd:,\\:tbxi...
Trying hd:,\ppc\bootinfo.txt...
Trying hd:,%BOOT...
>> Not a bootable ELF image
>> switching to new context:

OF_open bootpath=/pci@f2000000/mac-io@c/ata-3@20000/disk@0
read stage 2 blocks: 01234. done!
starting stage 2...

>> NetBSD/macppc OpenFirmware Boot, Revision 1.14 (Mon Jan 13 14:50:50 UTC 2025)
>> Open Firmware version 3.x
>> Open Firmware running in virtual-mode.
prom2boot: bootpath from OF: "/pci@f2000000/mac-io@c/ata-3@20000/disk@0:,%BOOT"
prom2boot: bootpath patched: "/pci@f2000000/mac-io@c/ata-3@20000/disk@0:"
bootline=
Trying /netbsd
11860332+167196 [463456+447084]=0xc570ec
start=0x100000
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024
[ 1.0000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/macppc/compile/GENERIC
---
1.12 Mon Aug 13 15:38:11 GMT 2001 tsubai Search "/netbsd.gz" and "/netbsd.macppc" in addition to "/netbsd".
/src/sys/arch/hp300/stand/common/
H A Dclock.c1.15 Sat May 17 17:27:21 GMT 2025 tsutsui Speed up hp300 netboot by reducing RTC access during timeout checks.

The read_bbc() function against HIL seems extremely slow.
It was being called on every timeout check via getsecs()
so it significantly slowed down loading a kernel via NFS.

In most cases (e.g., in common/if_le.c and libsa/net.c),
timeout checks are performed using getsecs() in busy loops
without any actual waiting. In such cases, it's not necessary
to read the precise time from the RTC on every call.

This change reduces the time to load the NetBSD/hp300 10.1 GENERIC kernel
via NFS from 260 seconds to 64 seconds on HP9000/382.
1.12 Sat Apr 19 06:04:58 GMT 2014 tsutsui Add RTC support for HP9000/425e to bootloader too.

Also put several cleanup:
- make local functions and variables static
- use proper variable types
- some KNF

Note it turns out that extreme slowness of netboot on hp300 is
caused by the too slow access of the traditional RTC chip at intio
(i.e. netboot on 425e is so much faster than others). Oh well.
/src/usr.sbin/lpr/lpr/
H A Dlpr.11.17 Tue Jan 17 19:11:13 GMT 2006 garbled Fix PR bin/14247
This PR claims that MacOSX 10.1 cannot print postscript files to a NetBSD
lpd because the mac will tag the file with an "o" for postscript, which
we do not handle. Rather than simply mapping o -> f as was done in the
PR, or mapping o -> l as was done in FreeBSD, I have implemented full
support for the "o" option. If a postscript filter does not exist in the
printcap file however, it will default to "l" handling.

With this change, you can now specify a "pf" or postscript filter in your
printcap, and have it handle postscript files sent to it with "lpr -o".

The "o" format in lpd is specified in RFC1179 as being a valid format flag.
1.12 Tue Feb 25 10:36:12 GMT 2003 wiz .Nm does not need a dummy argument ("") before punctuation or
for correct formatting of the SYNOPSIS any longer.
H A Dlpr.c1.33 Tue Jan 17 19:11:13 GMT 2006 garbled Fix PR bin/14247
This PR claims that MacOSX 10.1 cannot print postscript files to a NetBSD
lpd because the mac will tag the file with an "o" for postscript, which
we do not handle. Rather than simply mapping o -> f as was done in the
PR, or mapping o -> l as was done in FreeBSD, I have implemented full
support for the "o" option. If a postscript filter does not exist in the
printcap file however, it will default to "l" handling.

With this change, you can now specify a "pf" or postscript filter in your
printcap, and have it handle postscript files sent to it with "lpr -o".

The "o" format in lpd is specified in RFC1179 as being a valid format flag.
1.12 Fri Oct 25 22:07:53 GMT 1996 explorer Fix the get-a-shell hole, even if we are not currently open to that attack.
(1.2 release is, however, and this should be pulled up and released ASAP)

The previous version (1.11) checked into current limits the duration of
setuid-root periods much more than the 1.2 released version does, so the
attacker DID get a shell, but it was not a root shell.
/src/usr.sbin/lpr/common_source/
H A Dlp.h1.20 Tue Jan 17 19:11:12 GMT 2006 garbled Fix PR bin/14247
This PR claims that MacOSX 10.1 cannot print postscript files to a NetBSD
lpd because the mac will tag the file with an "o" for postscript, which
we do not handle. Rather than simply mapping o -> f as was done in the
PR, or mapping o -> l as was done in FreeBSD, I have implemented full
support for the "o" option. If a postscript filter does not exist in the
printcap file however, it will default to "l" handling.

With this change, you can now specify a "pf" or postscript filter in your
printcap, and have it handle postscript files sent to it with "lpr -o".

The "o" format in lpd is specified in RFC1179 as being a valid format flag.
1.12 Tue Jul 07 03:36:53 GMT 1998 mrg branches: 1.12.2; 1.12.6;
oops, missed this in gethostname sweep.
1.12 Tue Jul 07 03:36:53 GMT 1998 mrg branches: 1.12.2; 1.12.6;
oops, missed this in gethostname sweep.
1.12 Tue Jul 07 03:36:53 GMT 1998 mrg branches: 1.12.2; 1.12.6;
oops, missed this in gethostname sweep.
H A Dcommon.c1.31 Tue Jan 17 19:11:12 GMT 2006 garbled Fix PR bin/14247
This PR claims that MacOSX 10.1 cannot print postscript files to a NetBSD
lpd because the mac will tag the file with an "o" for postscript, which
we do not handle. Rather than simply mapping o -> f as was done in the
PR, or mapping o -> l as was done in FreeBSD, I have implemented full
support for the "o" option. If a postscript filter does not exist in the
printcap file however, it will default to "l" handling.

With this change, you can now specify a "pf" or postscript filter in your
printcap, and have it handle postscript files sent to it with "lpr -o".

The "o" format in lpd is specified in RFC1179 as being a valid format flag.
1.12 Sat Oct 18 08:52:17 GMT 1997 lukem use memcmp/memset/memmove instead of bcmp/bzero/bcopy
/src/sys/arch/hp300/stand/
H A DMakefile.buildboot1.40 Sat May 17 17:27:20 GMT 2025 tsutsui Speed up hp300 netboot by reducing RTC access during timeout checks.

The read_bbc() function against HIL seems extremely slow.
It was being called on every timeout check via getsecs()
so it significantly slowed down loading a kernel via NFS.

In most cases (e.g., in common/if_le.c and libsa/net.c),
timeout checks are performed using getsecs() in busy loops
without any actual waiting. In such cases, it's not necessary
to read the precise time from the RTC on every call.

This change reduces the time to load the NetBSD/hp300 10.1 GENERIC kernel
via NFS from 260 seconds to 64 seconds on HP9000/382.
1.12 Sat Dec 16 04:20:24 GMT 2000 simonb Use sys/conf/newvers_stand.sh instead of local script.
/src/usr.bin/calendar/calendars/
H A Dcalendar.netbsd1.51 Fri Dec 20 18:19:27 GMT 2024 martin branches: 1.51.2;
add 10.1
1.12 Fri Jul 15 03:17:46 GMT 2005 reed Add NetBSD 2.0.2 was released on April 12, 2005.
/src/usr.sbin/npf/npfctl/
H A Dnpf_scan.l1.13 Fri Sep 20 03:03:52 GMT 2013 rmind - NPF: change the group/ruleset syntax - simplify. Update npf.conf(5) manual.
- Add support for the inline pcap-filter(7) syntax in the rule, e.g.:
block out final pcap-filter "tcp and dst 10.1.1.252"
1.12 Wed Mar 20 00:29:47 GMT 2013 christos Make ALG's autoloadable by providing in the config file:
alg "algname"
H A Dnpf_show.c1.12 Wed Feb 19 01:43:16 GMT 2014 rmind npfctl_print_nat: fix the byte-order of the port.
1.2 Fri Sep 20 03:03:52 GMT 2013 rmind - NPF: change the group/ruleset syntax - simplify. Update npf.conf(5) manual.
- Add support for the inline pcap-filter(7) syntax in the rule, e.g.:
block out final pcap-filter "tcp and dst 10.1.1.252"
H A Dnpf_parse.y1.26 Fri Sep 20 03:03:52 GMT 2013 rmind - NPF: change the group/ruleset syntax - simplify. Update npf.conf(5) manual.
- Add support for the inline pcap-filter(7) syntax in the rule, e.g.:
block out final pcap-filter "tcp and dst 10.1.1.252"
1.12 Sun Aug 12 03:35:13 GMT 2012 rmind branches: 1.12.2;
- Extend npftest: add ruleset inspection testing from the config generated
by npfctl debug functionality. Auto-create npftest interfaces for this.
- NPF sessions: combine protocol and interface into a separate substructure,
share between the entries and thus fix the handling of them. Constify.
- npftest: add regression tests for NAT policies.
- npf_build_nat: simplify and fix bi-NAT regression.
- Bump yacc stack size for npfctl.
1.12 Sun Aug 12 03:35:13 GMT 2012 rmind branches: 1.12.2;
- Extend npftest: add ruleset inspection testing from the config generated
by npfctl debug functionality. Auto-create npftest interfaces for this.
- NPF sessions: combine protocol and interface into a separate substructure,
share between the entries and thus fix the handling of them. Constify.
- npftest: add regression tests for NAT policies.
- npf_build_nat: simplify and fix bi-NAT regression.
- Bump yacc stack size for npfctl.
H A Dnpf_build.c1.27 Fri Sep 20 03:03:52 GMT 2013 rmind - NPF: change the group/ruleset syntax - simplify. Update npf.conf(5) manual.
- Add support for the inline pcap-filter(7) syntax in the rule, e.g.:
block out final pcap-filter "tcp and dst 10.1.1.252"
1.12 Thu Jul 19 21:52:29 GMT 2012 spz teach npf ipv6-icmp
reviewed by rmind@
H A Dnpfctl.h1.33 Fri Sep 20 03:03:52 GMT 2013 rmind - NPF: change the group/ruleset syntax - simplify. Update npf.conf(5) manual.
- Add support for the inline pcap-filter(7) syntax in the rule, e.g.:
block out final pcap-filter "tcp and dst 10.1.1.252"
1.12 Sun Feb 26 21:50:05 GMT 2012 christos - make each element of a variable hold a type
- change get_type to take an index, so we can get the individual types of
each element (since primitive elements can be in lists)
- make port_range primitive
- add a routine to convert a variable of primitives to a variable containing
- only port ranges.
H A Dnpf.conf.51.31 Fri Sep 20 03:03:52 GMT 2013 rmind - NPF: change the group/ruleset syntax - simplify. Update npf.conf(5) manual.
- Add support for the inline pcap-filter(7) syntax in the rule, e.g.:
block out final pcap-filter "tcp and dst 10.1.1.252"
1.12 Fri Jun 15 23:24:08 GMT 2012 rmind - Rework NPF NAT syntax to be more structured and support future additions
of different types and configurations of NAT.
- npfctl: improve disassemble and show-config command functionality.
- Fix custom ICMP code and type filtering.
1.31 Fri Sep 20 03:03:52 GMT 2013 rmind - NPF: change the group/ruleset syntax - simplify. Update npf.conf(5) manual.
- Add support for the inline pcap-filter(7) syntax in the rule, e.g.:
block out final pcap-filter "tcp and dst 10.1.1.252"
1.12 Fri Jun 15 23:24:08 GMT 2012 rmind - Rework NPF NAT syntax to be more structured and support future additions
of different types and configurations of NAT.
- npfctl: improve disassemble and show-config command functionality.
- Fix custom ICMP code and type filtering.
1.31 Fri Sep 20 03:03:52 GMT 2013 rmind - NPF: change the group/ruleset syntax - simplify. Update npf.conf(5) manual.
- Add support for the inline pcap-filter(7) syntax in the rule, e.g.:
block out final pcap-filter "tcp and dst 10.1.1.252"
1.12 Fri Jun 15 23:24:08 GMT 2012 rmind - Rework NPF NAT syntax to be more structured and support future additions
of different types and configurations of NAT.
- npfctl: improve disassemble and show-config command functionality.
- Fix custom ICMP code and type filtering.
1.31 Fri Sep 20 03:03:52 GMT 2013 rmind - NPF: change the group/ruleset syntax - simplify. Update npf.conf(5) manual.
- Add support for the inline pcap-filter(7) syntax in the rule, e.g.:
block out final pcap-filter "tcp and dst 10.1.1.252"
1.12 Fri Jun 15 23:24:08 GMT 2012 rmind - Rework NPF NAT syntax to be more structured and support future additions
of different types and configurations of NAT.
- npfctl: improve disassemble and show-config command functionality.
- Fix custom ICMP code and type filtering.
/src/usr.sbin/lpr/lpd/
H A Dprintjob.c1.45 Tue Jan 17 19:11:13 GMT 2006 garbled Fix PR bin/14247
This PR claims that MacOSX 10.1 cannot print postscript files to a NetBSD
lpd because the mac will tag the file with an "o" for postscript, which
we do not handle. Rather than simply mapping o -> f as was done in the
PR, or mapping o -> l as was done in FreeBSD, I have implemented full
support for the "o" option. If a postscript filter does not exist in the
printcap file however, it will default to "l" handling.

With this change, you can now specify a "pf" or postscript filter in your
printcap, and have it handle postscript files sent to it with "lpr -o".

The "o" format in lpd is specified in RFC1179 as being a valid format flag.
1.12 Sat Mar 22 03:20:38 GMT 1997 lukem use O_EXCL with O_CREAT when making the tempfile
/src/share/misc/
H A Dbsd-family-tree1.86 Fri Dec 20 18:22:28 GMT 2024 martin add 10.1
1.12 Tue Jul 23 06:53:35 GMT 2002 grant add NetBSD 1.5.3.
/src/lib/librumphijack/
H A Dhijack.c1.78 Wed Mar 09 15:03:18 GMT 2011 pooka Add a bunch of process-wide hijack calls. Among other things, it's
now possible to use unmodified userspace binaries (rpcbind, mountd,
nfsd) to start a rump nfs service and mount file systems from it.

pain-rustique:42:~> mount
rumpfs on / type rumpfs (local)
10.1.1.1:/export on /mnt type nfs
1.12 Tue Jan 18 14:51:14 GMT 2011 pooka Don't count sparse elements in the poll vector for host fds.
/src/usr.bin/ftp/
H A Dextern.h1.55 Mon May 29 14:57:27 GMT 2000 itojun convert IPv4 mapped address (::ffff:10.1.1.1) into real IPv4 address
before touching it. IPv4 mapped address complicates too many things
in FTP protocol handling.
1.12 Thu Mar 13 06:23:15 GMT 1997 lukem Features:
* support remglobbing of auto_fetch arguments
* new flag - '-e'; disable editing
* "page file" == "get file |${PAGER-less}"

Bugfixes/cleanup:
* consistently use a trailing '.' on messages
* code cleanup, including buffer overrun fixes, use puts
and putchar in places, etc (inspired by OpenBSD mods)
* disable progress bar when local-file is a pipe or '-'
* skip \r in http headers
* fix remote ftpd slash bug more elegantly (so it works with ////)
* abort_remote(): check if cout==NULL before using it. should fix [bin/3273]
* fixed up cosmetic problems when complete_remote() generated errors from the
remote server (such as "no files found", "login with user and pass", ...)
done by adding extra argument to remglob(), which is a pointer to an error
buffer to put messages in rather than printing to stdout.
1.55 Mon May 29 14:57:27 GMT 2000 itojun convert IPv4 mapped address (::ffff:10.1.1.1) into real IPv4 address
before touching it. IPv4 mapped address complicates too many things
in FTP protocol handling.
1.12 Thu Mar 13 06:23:15 GMT 1997 lukem Features:
* support remglobbing of auto_fetch arguments
* new flag - '-e'; disable editing
* "page file" == "get file |${PAGER-less}"

Bugfixes/cleanup:
* consistently use a trailing '.' on messages
* code cleanup, including buffer overrun fixes, use puts
and putchar in places, etc (inspired by OpenBSD mods)
* disable progress bar when local-file is a pipe or '-'
* skip \r in http headers
* fix remote ftpd slash bug more elegantly (so it works with ////)
* abort_remote(): check if cout==NULL before using it. should fix [bin/3273]
* fixed up cosmetic problems when complete_remote() generated errors from the
remote server (such as "no files found", "login with user and pass", ...)
done by adding extra argument to remglob(), which is a pointer to an error
buffer to put messages in rather than printing to stdout.
H A Dftp.c1.96 Mon May 29 14:57:28 GMT 2000 itojun convert IPv4 mapped address (::ffff:10.1.1.1) into real IPv4 address
before touching it. IPv4 mapped address complicates too many things
in FTP protocol handling.
1.12 Fri Sep 08 01:06:28 GMT 1995 tls Sync with 4.4lite2
1.96 Mon May 29 14:57:28 GMT 2000 itojun convert IPv4 mapped address (::ffff:10.1.1.1) into real IPv4 address
before touching it. IPv4 mapped address complicates too many things
in FTP protocol handling.
1.12 Fri Sep 08 01:06:28 GMT 1995 tls Sync with 4.4lite2

Completed in 183 milliseconds

12