1 /* $NetBSD: sbmac.c,v 1.66 2024/02/09 17:57:03 andvar Exp $ */ 2 3 /* 4 * Copyright 2000, 2001, 2004 5 * Broadcom Corporation. All rights reserved. 6 * 7 * This software is furnished under license and may be used and copied only 8 * in accordance with the following terms and conditions. Subject to these 9 * conditions, you may download, copy, install, use, modify and distribute 10 * modified or unmodified copies of this software in source and/or binary 11 * form. No title or ownership is transferred hereby. 12 * 13 * 1) Any source code used, modified or distributed must reproduce and 14 * retain this copyright notice and list of conditions as they appear in 15 * the source file. 16 * 17 * 2) No right is granted to use any trade name, trademark, or logo of 18 * Broadcom Corporation. The "Broadcom Corporation" name may not be 19 * used to endorse or promote products derived from this software 20 * without the prior written permission of Broadcom Corporation. 21 * 22 * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED 23 * WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF 24 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR 25 * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE 26 * FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE 27 * LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 28 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 29 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 30 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 31 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE 32 * OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35 #include <sys/cdefs.h> 36 __KERNEL_RCSID(0, "$NetBSD: sbmac.c,v 1.66 2024/02/09 17:57:03 andvar Exp $"); 37 38 #include "opt_inet.h" 39 #include "opt_ns.h" 40 41 #include <sys/param.h> 42 #include <sys/systm.h> 43 #include <sys/sockio.h> 44 #include <sys/mbuf.h> 45 #include <sys/kmem.h> 46 #include <sys/kernel.h> 47 #include <sys/socket.h> 48 #include <sys/queue.h> 49 #include <sys/device.h> 50 51 #include <net/if.h> 52 #include <net/if_arp.h> 53 #include <net/if_ether.h> 54 #include <net/if_dl.h> 55 #include <net/if_media.h> 56 57 #include <net/bpf.h> 58 59 #ifdef INET 60 #include <netinet/in.h> 61 #include <netinet/if_inarp.h> 62 #endif 63 64 #include <mips/locore.h> 65 66 #include "sbobiovar.h" 67 68 #include <dev/mii/mii.h> 69 #include <dev/mii/miivar.h> 70 #include <dev/mii/mii_bitbang.h> 71 72 #include <mips/sibyte/include/sb1250_defs.h> 73 #include <mips/sibyte/include/sb1250_regs.h> 74 #include <mips/sibyte/include/sb1250_mac.h> 75 #include <mips/sibyte/include/sb1250_dma.h> 76 #include <mips/sibyte/include/sb1250_scd.h> 77 78 #include <evbmips/sbmips/systemsw.h> 79 80 /* Simple types */ 81 82 typedef u_long sbmac_port_t; 83 typedef uint64_t sbmac_physaddr_t; 84 typedef uint64_t sbmac_enetaddr_t; 85 86 typedef enum { sbmac_speed_auto, sbmac_speed_10, 87 sbmac_speed_100, sbmac_speed_1000 } sbmac_speed_t; 88 89 typedef enum { sbmac_duplex_auto, sbmac_duplex_half, 90 sbmac_duplex_full } sbmac_duplex_t; 91 92 typedef enum { sbmac_fc_auto, sbmac_fc_disabled, sbmac_fc_frame, 93 sbmac_fc_collision, sbmac_fc_carrier } sbmac_fc_t; 94 95 typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on, 96 sbmac_state_broken } sbmac_state_t; 97 98 99 /* Macros */ 100 101 #define SBMAC_EVENT_COUNTERS /* Include counters for various events */ 102 103 #define SBDMA_NEXTBUF(d, f) ((f + 1) & (d)->sbdma_dscr_mask) 104 105 #define CACHELINESIZE 32 106 #define NUMCACHEBLKS(x) (((x)+CACHELINESIZE-1)/CACHELINESIZE) 107 #define KVTOPHYS(x) kvtophys((vaddr_t)(x)) 108 109 #ifdef SBMACDEBUG 110 #define dprintf(x) printf x 111 #else 112 #define dprintf(x) 113 #endif 114 115 #define SBMAC_READCSR(t) mips3_ld((register_t)(t)) 116 #define SBMAC_WRITECSR(t, v) mips3_sd((register_t)(t), (v)) 117 118 #define PKSEG1(x) ((sbmac_port_t) MIPS_PHYS_TO_KSEG1(x)) 119 120 /* These are limited to fit within one virtual page, and must be 2**N. */ 121 #define SBMAC_MAX_TXDESCR 256 /* should be 1024 */ 122 #define SBMAC_MAX_RXDESCR 256 /* should be 512 */ 123 124 /* DMA Descriptor structure */ 125 126 typedef struct sbdmadscr_s { 127 uint64_t dscr_a; 128 uint64_t dscr_b; 129 } sbdmadscr_t; 130 131 132 /* DMA Controller structure */ 133 134 typedef struct sbmacdma_s { 135 136 /* 137 * This stuff is used to identify the channel and the registers 138 * associated with it. 139 */ 140 141 struct sbmac_softc *sbdma_eth; /* back pointer to associated MAC */ 142 int sbdma_channel; /* channel number */ 143 int sbdma_txdir; /* direction (1=transmit) */ 144 int sbdma_maxdescr; /* total # of descriptors in ring */ 145 sbmac_port_t sbdma_config0; /* DMA config register 0 */ 146 sbmac_port_t sbdma_config1; /* DMA config register 1 */ 147 sbmac_port_t sbdma_dscrbase; /* Descriptor base address */ 148 sbmac_port_t sbdma_dscrcnt; /* Descriptor count register */ 149 sbmac_port_t sbdma_curdscr; /* current descriptor address */ 150 151 /* 152 * This stuff is for maintenance of the ring 153 */ 154 sbdmadscr_t *sbdma_dscrtable; /* base of descriptor table */ 155 struct mbuf **sbdma_ctxtable; /* context table, one per descr */ 156 unsigned int sbdma_dscr_mask; /* sbdma_maxdescr - 1 */ 157 paddr_t sbdma_dscrtable_phys; /* and also the phys addr */ 158 unsigned int sbdma_add_index; /* next dscr for sw to add */ 159 unsigned int sbdma_rem_index; /* next dscr for sw to remove */ 160 } sbmacdma_t; 161 162 163 /* Ethernet softc structure */ 164 165 struct sbmac_softc { 166 167 /* 168 * NetBSD-specific things 169 */ 170 struct ethercom sc_ethercom; /* Ethernet common part */ 171 struct mii_data sc_mii; 172 struct callout sc_tick_ch; 173 174 device_t sc_dev; /* device */ 175 u_short sbm_if_flags; 176 void *sbm_intrhand; 177 178 /* 179 * Controller-specific things 180 */ 181 182 sbmac_port_t sbm_base; /* MAC's base address */ 183 sbmac_state_t sbm_state; /* current state */ 184 185 sbmac_port_t sbm_macenable; /* MAC Enable Register */ 186 sbmac_port_t sbm_maccfg; /* MAC Configuration Register */ 187 sbmac_port_t sbm_fifocfg; /* FIFO configuration register */ 188 sbmac_port_t sbm_framecfg; /* Frame configuration register */ 189 sbmac_port_t sbm_rxfilter; /* receive filter register */ 190 sbmac_port_t sbm_isr; /* Interrupt status register */ 191 sbmac_port_t sbm_imr; /* Interrupt mask register */ 192 193 sbmac_speed_t sbm_speed; /* current speed */ 194 sbmac_duplex_t sbm_duplex; /* current duplex */ 195 sbmac_fc_t sbm_fc; /* current flow control setting */ 196 int sbm_rxflags; /* received packet flags */ 197 198 u_char sbm_hwaddr[ETHER_ADDR_LEN]; 199 200 sbmacdma_t sbm_txdma; /* for now, only use channel 0 */ 201 sbmacdma_t sbm_rxdma; 202 203 int sbm_pass3_dma; /* chip has pass3 SOC DMA features */ 204 205 #ifdef SBMAC_EVENT_COUNTERS 206 struct evcnt sbm_ev_rxintr; /* Rx interrupts */ 207 struct evcnt sbm_ev_txintr; /* Tx interrupts */ 208 struct evcnt sbm_ev_txdrop; /* Tx dropped due to no mbuf alloc failed */ 209 struct evcnt sbm_ev_txstall; /* Tx stalled due to no descriptors free */ 210 211 struct evcnt sbm_ev_txsplit; /* pass3 Tx split mbuf */ 212 struct evcnt sbm_ev_txkeep; /* pass3 Tx didn't split mbuf */ 213 #endif 214 }; 215 216 217 #ifdef SBMAC_EVENT_COUNTERS 218 #define SBMAC_EVCNT_INCR(ev) (ev).ev_count++ 219 #else 220 #define SBMAC_EVCNT_INCR(ev) do { /* nothing */ } while (0) 221 #endif 222 223 /* Externs */ 224 225 extern paddr_t kvtophys(vaddr_t); 226 227 /* Prototypes */ 228 229 static void sbdma_initctx(sbmacdma_t *, struct sbmac_softc *, int, int, int); 230 static void sbdma_channel_start(sbmacdma_t *); 231 static int sbdma_add_rcvbuffer(sbmacdma_t *, struct mbuf *); 232 static int sbdma_add_txbuffer(sbmacdma_t *, struct mbuf *); 233 static void sbdma_emptyring(sbmacdma_t *); 234 static void sbdma_fillring(sbmacdma_t *); 235 static void sbdma_rx_process(struct sbmac_softc *, sbmacdma_t *); 236 static void sbdma_tx_process(struct sbmac_softc *, sbmacdma_t *); 237 static void sbmac_initctx(struct sbmac_softc *); 238 static void sbmac_channel_start(struct sbmac_softc *); 239 static void sbmac_channel_stop(struct sbmac_softc *); 240 static sbmac_state_t sbmac_set_channel_state(struct sbmac_softc *, 241 sbmac_state_t); 242 static void sbmac_promiscuous_mode(struct sbmac_softc *, bool); 243 static void sbmac_init_and_start(struct sbmac_softc *); 244 static uint64_t sbmac_addr2reg(u_char *); 245 static void sbmac_intr(void *, uint32_t, vaddr_t); 246 static void sbmac_start(struct ifnet *); 247 static void sbmac_setmulti(struct sbmac_softc *); 248 static int sbmac_ether_ioctl(struct ifnet *, u_long, void *); 249 static int sbmac_ioctl(struct ifnet *, u_long, void *); 250 static void sbmac_watchdog(struct ifnet *); 251 static int sbmac_match(device_t, cfdata_t, void *); 252 static void sbmac_attach(device_t, device_t, void *); 253 static bool sbmac_set_speed(struct sbmac_softc *, sbmac_speed_t); 254 static bool sbmac_set_duplex(struct sbmac_softc *, sbmac_duplex_t, sbmac_fc_t); 255 static void sbmac_tick(void *); 256 257 258 /* Globals */ 259 260 CFATTACH_DECL_NEW(sbmac, sizeof(struct sbmac_softc), 261 sbmac_match, sbmac_attach, NULL, NULL); 262 263 static uint32_t sbmac_mii_bitbang_read(device_t self); 264 static void sbmac_mii_bitbang_write(device_t self, uint32_t val); 265 266 static const struct mii_bitbang_ops sbmac_mii_bitbang_ops = { 267 sbmac_mii_bitbang_read, 268 sbmac_mii_bitbang_write, 269 { 270 (uint32_t)M_MAC_MDIO_OUT, /* MII_BIT_MDO */ 271 (uint32_t)M_MAC_MDIO_IN, /* MII_BIT_MDI */ 272 (uint32_t)M_MAC_MDC, /* MII_BIT_MDC */ 273 0, /* MII_BIT_DIR_HOST_PHY */ 274 (uint32_t)M_MAC_MDIO_DIR /* MII_BIT_DIR_PHY_HOST */ 275 } 276 }; 277 278 static uint32_t 279 sbmac_mii_bitbang_read(device_t self) 280 { 281 struct sbmac_softc *sc = device_private(self); 282 sbmac_port_t reg; 283 284 reg = PKSEG1(sc->sbm_base + R_MAC_MDIO); 285 return (uint32_t) SBMAC_READCSR(reg); 286 } 287 288 static void 289 sbmac_mii_bitbang_write(device_t self, uint32_t val) 290 { 291 struct sbmac_softc *sc = device_private(self); 292 sbmac_port_t reg; 293 294 reg = PKSEG1(sc->sbm_base + R_MAC_MDIO); 295 296 SBMAC_WRITECSR(reg, (val & 297 (M_MAC_MDC | M_MAC_MDIO_DIR | M_MAC_MDIO_OUT | M_MAC_MDIO_IN))); 298 } 299 300 /* 301 * Read an PHY register through the MII. 302 */ 303 static int 304 sbmac_mii_readreg(device_t self, int phy, int reg, uint16_t *val) 305 { 306 307 return mii_bitbang_readreg(self, &sbmac_mii_bitbang_ops, phy, reg, 308 val); 309 } 310 311 /* 312 * Write to a PHY register through the MII. 313 */ 314 static int 315 sbmac_mii_writereg(device_t self, int phy, int reg, uint16_t val) 316 { 317 318 return mii_bitbang_writereg(self, &sbmac_mii_bitbang_ops, phy, reg, 319 val); 320 } 321 322 static void 323 sbmac_mii_statchg(struct ifnet *ifp) 324 { 325 struct sbmac_softc *sc = ifp->if_softc; 326 sbmac_state_t oldstate; 327 328 /* Stop the MAC in preparation for changing all of the parameters. */ 329 oldstate = sbmac_set_channel_state(sc, sbmac_state_off); 330 331 switch (sc->sc_ethercom.ec_if.if_baudrate) { 332 default: /* if autonegotiation fails, assume 10Mbit */ 333 case IF_Mbps(10): 334 sbmac_set_speed(sc, sbmac_speed_10); 335 break; 336 337 case IF_Mbps(100): 338 sbmac_set_speed(sc, sbmac_speed_100); 339 break; 340 341 case IF_Mbps(1000): 342 sbmac_set_speed(sc, sbmac_speed_1000); 343 break; 344 } 345 346 if (sc->sc_mii.mii_media_active & IFM_FDX) { 347 /* Configure for full-duplex */ 348 /* XXX: is flow control right for 10, 100? */ 349 sbmac_set_duplex(sc, sbmac_duplex_full, sbmac_fc_frame); 350 } else { 351 /* Configure for half-duplex */ 352 /* XXX: is flow control right? */ 353 sbmac_set_duplex(sc, sbmac_duplex_half, sbmac_fc_disabled); 354 } 355 356 /* And put it back into its former state. */ 357 sbmac_set_channel_state(sc, oldstate); 358 } 359 360 /* 361 * SBDMA_INITCTX(d, sc, chan, txrx, maxdescr) 362 * 363 * Initialize a DMA channel context. Since there are potentially 364 * eight DMA channels per MAC, it's nice to do this in a standard 365 * way. 366 * 367 * Input parameters: 368 * d - sbmacdma_t structure (DMA channel context) 369 * sc - sbmac_softc structure (pointer to a MAC) 370 * chan - channel number (0..1 right now) 371 * txrx - Identifies DMA_TX or DMA_RX for channel direction 372 * maxdescr - number of descriptors 373 * 374 * Return value: 375 * nothing 376 */ 377 378 static void 379 sbdma_initctx(sbmacdma_t *d, struct sbmac_softc *sc, int chan, int txrx, 380 int maxdescr) 381 { 382 uintptr_t ptr; 383 384 /* 385 * Save away interesting stuff in the structure 386 */ 387 388 d->sbdma_eth = sc; 389 d->sbdma_channel = chan; 390 d->sbdma_txdir = txrx; 391 392 /* 393 * initialize register pointers 394 */ 395 396 d->sbdma_config0 = PKSEG1(sc->sbm_base + 397 R_MAC_DMA_REGISTER(txrx, chan, R_MAC_DMA_CONFIG0)); 398 d->sbdma_config1 = PKSEG1(sc->sbm_base + 399 R_MAC_DMA_REGISTER(txrx, chan, R_MAC_DMA_CONFIG1)); 400 d->sbdma_dscrbase = PKSEG1(sc->sbm_base + 401 R_MAC_DMA_REGISTER(txrx, chan, R_MAC_DMA_DSCR_BASE)); 402 d->sbdma_dscrcnt = PKSEG1(sc->sbm_base + 403 R_MAC_DMA_REGISTER(txrx, chan, R_MAC_DMA_DSCR_CNT)); 404 d->sbdma_curdscr = PKSEG1(sc->sbm_base + 405 R_MAC_DMA_REGISTER(txrx, chan, R_MAC_DMA_CUR_DSCRADDR)); 406 407 /* 408 * Allocate memory for the ring. This must be aligned to a 409 * 32-byte cache line boundary on pass1 or pass2 silicon. 410 */ 411 412 d->sbdma_maxdescr = maxdescr; 413 d->sbdma_dscr_mask = d->sbdma_maxdescr - 1; 414 ptr = (uintptr_t)kmem_zalloc(d->sbdma_maxdescr * sizeof(sbdmadscr_t) + 415 CACHELINESIZE - 1, KM_SLEEP); 416 d->sbdma_dscrtable = (sbdmadscr_t *)roundup2(ptr, CACHELINESIZE); 417 418 d->sbdma_dscrtable_phys = KVTOPHYS(d->sbdma_dscrtable); 419 420 /* 421 * And context table 422 */ 423 424 d->sbdma_ctxtable = (struct mbuf **) 425 kmem_zalloc(d->sbdma_maxdescr * sizeof(struct mbuf *), KM_SLEEP); 426 } 427 428 /* 429 * SBDMA_CHANNEL_START(d) 430 * 431 * Initialize the hardware registers for a DMA channel. 432 * 433 * Input parameters: 434 * d - DMA channel to init (context must be previously init'd 435 * 436 * Return value: 437 * nothing 438 */ 439 440 static void 441 sbdma_channel_start(sbmacdma_t *d) 442 { 443 /* 444 * Turn on the DMA channel 445 */ 446 447 SBMAC_WRITECSR(d->sbdma_config1, 0); 448 449 SBMAC_WRITECSR(d->sbdma_dscrbase, d->sbdma_dscrtable_phys); 450 451 SBMAC_WRITECSR(d->sbdma_config0, V_DMA_RINGSZ(d->sbdma_maxdescr) | 0); 452 453 /* 454 * Initialize ring pointers 455 */ 456 457 d->sbdma_add_index = 0; 458 d->sbdma_rem_index = 0; 459 } 460 461 /* 462 * SBDMA_ADD_RCVBUFFER(d, m) 463 * 464 * Add a buffer to the specified DMA channel. For receive channels, 465 * this queues a buffer for inbound packets. 466 * 467 * Input parameters: 468 * d - DMA channel descriptor 469 * m - mbuf to add, or NULL if we should allocate one. 470 * 471 * Return value: 472 * 0 if buffer could not be added (ring is full) 473 * 1 if buffer added successfully 474 */ 475 476 static int 477 sbdma_add_rcvbuffer(sbmacdma_t *d, struct mbuf *m) 478 { 479 unsigned int dsc, nextdsc; 480 struct mbuf *m_new = NULL; 481 482 /* get pointer to our current place in the ring */ 483 484 dsc = d->sbdma_add_index; 485 nextdsc = SBDMA_NEXTBUF(d, d->sbdma_add_index); 486 487 /* 488 * figure out if the ring is full - if the next descriptor 489 * is the same as the one that we're going to remove from 490 * the ring, the ring is full 491 */ 492 493 if (nextdsc == d->sbdma_rem_index) 494 return ENOSPC; 495 496 /* 497 * Allocate an mbuf if we don't already have one. 498 * If we do have an mbuf, reset it so that it's empty. 499 */ 500 501 if (m == NULL) { 502 MGETHDR(m_new, M_DONTWAIT, MT_DATA); 503 if (m_new == NULL) { 504 aprint_error_dev(d->sbdma_eth->sc_dev, 505 "mbuf allocation failed\n"); 506 return ENOBUFS; 507 } 508 509 MCLGET(m_new, M_DONTWAIT); 510 if (!(m_new->m_flags & M_EXT)) { 511 aprint_error_dev(d->sbdma_eth->sc_dev, 512 "mbuf cluster allocation failed\n"); 513 m_freem(m_new); 514 return ENOBUFS; 515 } 516 517 m_new->m_len = m_new->m_pkthdr.len= MCLBYTES; 518 m_adj(m_new, ETHER_ALIGN); 519 } else { 520 m_new = m; 521 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; 522 m_new->m_data = m_new->m_ext.ext_buf; 523 m_adj(m_new, ETHER_ALIGN); 524 } 525 526 /* 527 * fill in the descriptor 528 */ 529 530 d->sbdma_dscrtable[dsc].dscr_a = KVTOPHYS(mtod(m_new, void *)) | 531 V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(ETHER_ALIGN + m_new->m_len)) | 532 M_DMA_DSCRA_INTERRUPT; 533 534 /* receiving: no options */ 535 d->sbdma_dscrtable[dsc].dscr_b = 0; 536 537 /* 538 * fill in the context 539 */ 540 541 d->sbdma_ctxtable[dsc] = m_new; 542 543 /* 544 * point at next packet 545 */ 546 547 d->sbdma_add_index = nextdsc; 548 549 /* 550 * Give the buffer to the DMA engine. 551 */ 552 553 SBMAC_WRITECSR(d->sbdma_dscrcnt, 1); 554 555 return 0; /* we did it */ 556 } 557 558 /* 559 * SBDMA_ADD_TXBUFFER(d, m) 560 * 561 * Add a transmit buffer to the specified DMA channel, causing a 562 * transmit to start. 563 * 564 * Input parameters: 565 * d - DMA channel descriptor 566 * m - mbuf to add 567 * 568 * Return value: 569 * 0 transmit queued successfully 570 * otherwise error code 571 */ 572 573 static int 574 sbdma_add_txbuffer(sbmacdma_t *d, struct mbuf *m) 575 { 576 unsigned int dsc, nextdsc, prevdsc, origdesc; 577 int length; 578 int num_mbufs = 0; 579 struct sbmac_softc *sc = d->sbdma_eth; 580 581 /* get pointer to our current place in the ring */ 582 583 dsc = d->sbdma_add_index; 584 nextdsc = SBDMA_NEXTBUF(d, d->sbdma_add_index); 585 586 /* 587 * figure out if the ring is full - if the next descriptor 588 * is the same as the one that we're going to remove from 589 * the ring, the ring is full 590 */ 591 592 if (nextdsc == d->sbdma_rem_index) { 593 SBMAC_EVCNT_INCR(sc->sbm_ev_txstall); 594 return ENOSPC; 595 } 596 597 /* 598 * PASS3 parts do not have buffer alignment restriction. 599 * No need to copy/coalesce to new mbuf. Also has different 600 * descriptor format 601 */ 602 if (sc->sbm_pass3_dma) { 603 struct mbuf *m_temp = NULL; 604 605 /* 606 * Loop thru this mbuf record. 607 * The head mbuf will have SOP set. 608 */ 609 d->sbdma_dscrtable[dsc].dscr_a = KVTOPHYS(mtod(m, void *)) | 610 M_DMA_ETHTX_SOP; 611 612 /* 613 * transmitting: set outbound options,buffer A size(+ low 5 614 * bits of start addr),and packet length. 615 */ 616 d->sbdma_dscrtable[dsc].dscr_b = 617 V_DMA_DSCRB_OPTIONS(K_DMA_ETHTX_APPENDCRC_APPENDPAD) | 618 V_DMA_DSCRB_A_SIZE((m->m_len + 619 (mtod(m, uintptr_t) & 0x0000001F))) | 620 V_DMA_DSCRB_PKT_SIZE_MSB((m->m_pkthdr.len & 0xc000) >> 14) | 621 V_DMA_DSCRB_PKT_SIZE(m->m_pkthdr.len & 0x3fff); 622 623 d->sbdma_add_index = nextdsc; 624 origdesc = prevdsc = dsc; 625 dsc = d->sbdma_add_index; 626 num_mbufs++; 627 628 /* Start with first non-head mbuf */ 629 for(m_temp = m->m_next; m_temp != 0; m_temp = m_temp->m_next) { 630 int len, next_len; 631 uint64_t addr; 632 633 if (m_temp->m_len == 0) 634 continue; /* Skip 0-length mbufs */ 635 636 len = m_temp->m_len; 637 addr = KVTOPHYS(mtod(m_temp, void *)); 638 639 /* 640 * Check to see if the mbuf spans a page boundary. If 641 * it does, and the physical pages behind the virtual 642 * pages are not contiguous, split it so that each 643 * virtual page uses its own Tx descriptor. 644 */ 645 if (trunc_page(addr) != trunc_page(addr + len - 1)) { 646 next_len = (addr + len) - trunc_page(addr + len); 647 648 len -= next_len; 649 650 if (addr + len == 651 KVTOPHYS(mtod(m_temp, char *) + len)) { 652 SBMAC_EVCNT_INCR(sc->sbm_ev_txkeep); 653 len += next_len; 654 next_len = 0; 655 } else { 656 SBMAC_EVCNT_INCR(sc->sbm_ev_txsplit); 657 } 658 } else { 659 next_len = 0; 660 } 661 662 again: 663 /* 664 * fill in the descriptor 665 */ 666 d->sbdma_dscrtable[dsc].dscr_a = addr; 667 668 /* 669 * transmitting: set outbound options,buffer A 670 * size(+ low 5 bits of start addr) 671 */ 672 d->sbdma_dscrtable[dsc].dscr_b = V_DMA_DSCRB_OPTIONS(K_DMA_ETHTX_NOTSOP) | 673 V_DMA_DSCRB_A_SIZE((len + (addr & 0x0000001F))); 674 675 d->sbdma_ctxtable[dsc] = NULL; 676 677 /* 678 * point at next descriptor 679 */ 680 nextdsc = SBDMA_NEXTBUF(d, d->sbdma_add_index); 681 if (nextdsc == d->sbdma_rem_index) { 682 d->sbdma_add_index = origdesc; 683 SBMAC_EVCNT_INCR(sc->sbm_ev_txstall); 684 return ENOSPC; 685 } 686 d->sbdma_add_index = nextdsc; 687 688 prevdsc = dsc; 689 dsc = d->sbdma_add_index; 690 num_mbufs++; 691 692 if (next_len != 0) { 693 addr = KVTOPHYS(mtod(m_temp, char *) + len); 694 len = next_len; 695 696 next_len = 0; 697 goto again; 698 } 699 700 } 701 /* Set head mbuf to last context index */ 702 d->sbdma_ctxtable[prevdsc] = m; 703 704 /* Interrupt on last dscr of packet. */ 705 d->sbdma_dscrtable[prevdsc].dscr_a |= M_DMA_DSCRA_INTERRUPT; 706 } else { 707 struct mbuf *m_new = NULL; 708 /* 709 * [BEGIN XXX] 710 * XXX Copy/coalesce the mbufs into a single mbuf cluster (we 711 * assume it will fit). This is a temporary hack to get us 712 * going. 713 */ 714 715 MGETHDR(m_new, M_DONTWAIT, MT_DATA); 716 if (m_new == NULL) { 717 aprint_error_dev(d->sbdma_eth->sc_dev, 718 "mbuf allocation failed\n"); 719 SBMAC_EVCNT_INCR(sc->sbm_ev_txdrop); 720 return ENOBUFS; 721 } 722 723 MCLGET(m_new, M_DONTWAIT); 724 if (!(m_new->m_flags & M_EXT)) { 725 aprint_error_dev(d->sbdma_eth->sc_dev, 726 "mbuf cluster allocation failed\n"); 727 m_freem(m_new); 728 SBMAC_EVCNT_INCR(sc->sbm_ev_txdrop); 729 return ENOBUFS; 730 } 731 732 m_new->m_len = m_new->m_pkthdr.len= MCLBYTES; 733 /*m_adj(m_new, ETHER_ALIGN);*/ 734 735 /* 736 * XXX Don't forget to include the offset portion in the 737 * XXX cache block calculation when this code is rewritten! 738 */ 739 740 /* 741 * Copy data 742 */ 743 744 m_copydata(m, 0, m->m_pkthdr.len, mtod(m_new, void *)); 745 m_new->m_len = m_new->m_pkthdr.len = m->m_pkthdr.len; 746 747 /* Free old mbuf 'm', actual mbuf is now 'm_new' */ 748 749 // XXX: CALLERS WILL FREE, they might have to bpf_mtap() if this 750 // XXX: function succeeds. 751 // m_freem(m); 752 length = m_new->m_len; 753 754 /* [END XXX] */ 755 /* 756 * fill in the descriptor 757 */ 758 759 d->sbdma_dscrtable[dsc].dscr_a = KVTOPHYS(mtod(m_new,void *)) | 760 V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(m_new->m_len)) | 761 M_DMA_DSCRA_INTERRUPT | 762 M_DMA_ETHTX_SOP; 763 764 /* transmitting: set outbound options and length */ 765 d->sbdma_dscrtable[dsc].dscr_b = 766 V_DMA_DSCRB_OPTIONS(K_DMA_ETHTX_APPENDCRC_APPENDPAD) | 767 V_DMA_DSCRB_PKT_SIZE(length); 768 769 num_mbufs++; 770 771 /* 772 * fill in the context 773 */ 774 775 d->sbdma_ctxtable[dsc] = m_new; 776 777 /* 778 * point at next packet 779 */ 780 d->sbdma_add_index = nextdsc; 781 } 782 783 /* 784 * Give the buffer to the DMA engine. 785 */ 786 787 SBMAC_WRITECSR(d->sbdma_dscrcnt, num_mbufs); 788 789 return 0; /* we did it */ 790 } 791 792 /* 793 * SBDMA_EMPTYRING(d) 794 * 795 * Free all allocated mbufs on the specified DMA channel; 796 * 797 * Input parameters: 798 * d - DMA channel 799 * 800 * Return value: 801 * nothing 802 */ 803 804 static void 805 sbdma_emptyring(sbmacdma_t *d) 806 { 807 int idx; 808 struct mbuf *m; 809 810 for (idx = 0; idx < d->sbdma_maxdescr; idx++) { 811 m = d->sbdma_ctxtable[idx]; 812 if (m) { 813 m_freem(m); 814 d->sbdma_ctxtable[idx] = NULL; 815 } 816 } 817 } 818 819 /* 820 * SBDMA_FILLRING(d) 821 * 822 * Fill the specified DMA channel (must be receive channel) 823 * with mbufs 824 * 825 * Input parameters: 826 * d - DMA channel 827 * 828 * Return value: 829 * nothing 830 */ 831 832 static void 833 sbdma_fillring(sbmacdma_t *d) 834 { 835 int idx; 836 837 for (idx = 0; idx < SBMAC_MAX_RXDESCR-1; idx++) 838 if (sbdma_add_rcvbuffer(d, NULL) != 0) 839 break; 840 } 841 842 /* 843 * SBDMA_RX_PROCESS(sc, d) 844 * 845 * Process "completed" receive buffers on the specified DMA channel. 846 * Note that this isn't really ideal for priority channels, since 847 * it processes all of the packets on a given channel before 848 * returning. 849 * 850 * Input parameters: 851 * sc - softc structure 852 * d - DMA channel context 853 * 854 * Return value: 855 * nothing 856 */ 857 858 static void 859 sbdma_rx_process(struct sbmac_softc *sc, sbmacdma_t *d) 860 { 861 int curidx; 862 int hwidx; 863 sbdmadscr_t *dscp; 864 struct mbuf *m; 865 int len; 866 867 struct ifnet *ifp = &(sc->sc_ethercom.ec_if); 868 869 for (;;) { 870 /* 871 * figure out where we are (as an index) and where 872 * the hardware is (also as an index) 873 * 874 * This could be done faster if (for example) the 875 * descriptor table was page-aligned and contiguous in 876 * both virtual and physical memory -- you could then 877 * just compare the low-order bits of the virtual address 878 * (sbdma_rem_index) and the physical address 879 * (sbdma_curdscr CSR). 880 */ 881 882 curidx = d->sbdma_rem_index; 883 hwidx = (int) 884 (((SBMAC_READCSR(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - 885 d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t)); 886 887 /* 888 * If they're the same, that means we've processed all 889 * of the descriptors up to (but not including) the one that 890 * the hardware is working on right now. 891 */ 892 893 if (curidx == hwidx) 894 break; 895 896 /* 897 * Otherwise, get the packet's mbuf ptr back 898 */ 899 900 dscp = &(d->sbdma_dscrtable[curidx]); 901 m = d->sbdma_ctxtable[curidx]; 902 d->sbdma_ctxtable[curidx] = NULL; 903 904 len = (int)G_DMA_DSCRB_PKT_SIZE(dscp->dscr_b) - 4; 905 906 /* 907 * Check packet status. If good, process it. 908 * If not, silently drop it and put it back on the 909 * receive ring. 910 */ 911 912 if (! (dscp->dscr_a & M_DMA_ETHRX_BAD)) { 913 914 /* 915 * Set length into the packet 916 * XXX do we remove the CRC here? 917 */ 918 m->m_pkthdr.len = m->m_len = len; 919 920 m_set_rcvif(m, ifp); 921 922 923 /* 924 * Add a new buffer to replace the old one. 925 */ 926 sbdma_add_rcvbuffer(d, NULL); 927 928 /* 929 * Handle BPF listeners. Let the BPF user see the 930 * packet, but don't pass it up to the ether_input() 931 * layer unless it's a broadcast packet, multicast 932 * packet, matches our ethernet address or the 933 * interface is in promiscuous mode. 934 */ 935 936 /* 937 * Pass the buffer to the kernel 938 */ 939 if_percpuq_enqueue(ifp->if_percpuq, m); 940 } else { 941 /* 942 * Packet was mangled somehow. Just drop it and 943 * put it back on the receive ring. 944 */ 945 sbdma_add_rcvbuffer(d, m); 946 } 947 948 /* 949 * .. and advance to the next buffer. 950 */ 951 952 d->sbdma_rem_index = SBDMA_NEXTBUF(d, d->sbdma_rem_index); 953 } 954 } 955 956 /* 957 * SBDMA_TX_PROCESS(sc, d) 958 * 959 * Process "completed" transmit buffers on the specified DMA channel. 960 * This is normally called within the interrupt service routine. 961 * Note that this isn't really ideal for priority channels, since 962 * it processes all of the packets on a given channel before 963 * returning. 964 * 965 * Input parameters: 966 * sc - softc structure 967 * d - DMA channel context 968 * 969 * Return value: 970 * nothing 971 */ 972 973 static void 974 sbdma_tx_process(struct sbmac_softc *sc, sbmacdma_t *d) 975 { 976 int curidx; 977 int hwidx; 978 struct mbuf *m; 979 980 struct ifnet *ifp = &(sc->sc_ethercom.ec_if); 981 982 for (;;) { 983 /* 984 * figure out where we are (as an index) and where 985 * the hardware is (also as an index) 986 * 987 * This could be done faster if (for example) the 988 * descriptor table was page-aligned and contiguous in 989 * both virtual and physical memory -- you could then 990 * just compare the low-order bits of the virtual address 991 * (sbdma_rem_index) and the physical address 992 * (sbdma_curdscr CSR). 993 */ 994 995 curidx = d->sbdma_rem_index; 996 hwidx = (int) 997 (((SBMAC_READCSR(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - 998 d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t)); 999 1000 /* 1001 * If they're the same, that means we've processed all 1002 * of the descriptors up to (but not including) the one that 1003 * the hardware is working on right now. 1004 */ 1005 1006 if (curidx == hwidx) 1007 break; 1008 1009 /* 1010 * Otherwise, get the packet's mbuf ptr back 1011 */ 1012 1013 m = d->sbdma_ctxtable[curidx]; 1014 d->sbdma_ctxtable[curidx] = NULL; 1015 1016 /* 1017 * for transmits we just free buffers and count packets. 1018 */ 1019 if_statinc(ifp, if_opackets); 1020 m_freem(m); 1021 1022 /* 1023 * .. and advance to the next buffer. 1024 */ 1025 1026 d->sbdma_rem_index = SBDMA_NEXTBUF(d, d->sbdma_rem_index); 1027 } 1028 } 1029 1030 /* 1031 * SBMAC_INITCTX(s) 1032 * 1033 * Initialize an Ethernet context structure - this is called 1034 * once per MAC on the 1250. Memory is allocated here, so don't 1035 * call it again from inside the ioctl routines that bring the 1036 * interface up/down 1037 * 1038 * Input parameters: 1039 * sc - sbmac context structure 1040 * 1041 * Return value: 1042 * 0 1043 */ 1044 1045 static void 1046 sbmac_initctx(struct sbmac_softc *sc) 1047 { 1048 uint64_t sysrev; 1049 1050 /* 1051 * figure out the addresses of some ports 1052 */ 1053 1054 sc->sbm_macenable = PKSEG1(sc->sbm_base + R_MAC_ENABLE); 1055 sc->sbm_maccfg = PKSEG1(sc->sbm_base + R_MAC_CFG); 1056 sc->sbm_fifocfg = PKSEG1(sc->sbm_base + R_MAC_THRSH_CFG); 1057 sc->sbm_framecfg = PKSEG1(sc->sbm_base + R_MAC_FRAMECFG); 1058 sc->sbm_rxfilter = PKSEG1(sc->sbm_base + R_MAC_ADFILTER_CFG); 1059 sc->sbm_isr = PKSEG1(sc->sbm_base + R_MAC_STATUS); 1060 sc->sbm_imr = PKSEG1(sc->sbm_base + R_MAC_INT_MASK); 1061 1062 /* 1063 * Initialize the DMA channels. Right now, only one per MAC is used 1064 * Note: Only do this _once_, as it allocates memory from the kernel! 1065 */ 1066 1067 sbdma_initctx(&(sc->sbm_txdma), sc, 0, DMA_TX, SBMAC_MAX_TXDESCR); 1068 sbdma_initctx(&(sc->sbm_rxdma), sc, 0, DMA_RX, SBMAC_MAX_RXDESCR); 1069 1070 /* 1071 * initial state is OFF 1072 */ 1073 1074 sc->sbm_state = sbmac_state_off; 1075 1076 /* 1077 * Initial speed is (XXX TEMP) 10MBit/s HDX no FC 1078 */ 1079 1080 sc->sbm_speed = sbmac_speed_10; 1081 sc->sbm_duplex = sbmac_duplex_half; 1082 sc->sbm_fc = sbmac_fc_disabled; 1083 1084 /* 1085 * Determine SOC type. 112x has Pass3 SOC features. 1086 */ 1087 sysrev = SBMAC_READCSR( PKSEG1(A_SCD_SYSTEM_REVISION) ); 1088 sc->sbm_pass3_dma = (SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1120 || 1089 SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1125 || 1090 SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1125H || 1091 (SYS_SOC_TYPE(sysrev) == K_SYS_SOC_TYPE_BCM1250 && 1092 G_SYS_REVISION(sysrev) >= K_SYS_REVISION_BCM1250_PASS3)); 1093 #ifdef SBMAC_EVENT_COUNTERS 1094 const char * const xname = device_xname(sc->sc_dev); 1095 evcnt_attach_dynamic(&sc->sbm_ev_rxintr, EVCNT_TYPE_INTR, 1096 NULL, xname, "rxintr"); 1097 evcnt_attach_dynamic(&sc->sbm_ev_txintr, EVCNT_TYPE_INTR, 1098 NULL, xname, "txintr"); 1099 evcnt_attach_dynamic(&sc->sbm_ev_txdrop, EVCNT_TYPE_MISC, 1100 NULL, xname, "txdrop"); 1101 evcnt_attach_dynamic(&sc->sbm_ev_txstall, EVCNT_TYPE_MISC, 1102 NULL, xname, "txstall"); 1103 if (sc->sbm_pass3_dma) { 1104 evcnt_attach_dynamic(&sc->sbm_ev_txsplit, EVCNT_TYPE_MISC, 1105 NULL, xname, "pass3tx-split"); 1106 evcnt_attach_dynamic(&sc->sbm_ev_txkeep, EVCNT_TYPE_MISC, 1107 NULL, xname, "pass3tx-keep"); 1108 } 1109 #endif 1110 } 1111 1112 /* 1113 * SBMAC_CHANNEL_START(s) 1114 * 1115 * Start packet processing on this MAC. 1116 * 1117 * Input parameters: 1118 * sc - sbmac structure 1119 * 1120 * Return value: 1121 * nothing 1122 */ 1123 1124 static void 1125 sbmac_channel_start(struct sbmac_softc *sc) 1126 { 1127 uint64_t reg; 1128 sbmac_port_t port; 1129 uint64_t cfg, fifo, framecfg; 1130 int idx; 1131 uint64_t dma_cfg0, fifo_cfg; 1132 sbmacdma_t *txdma; 1133 1134 /* 1135 * Don't do this if running 1136 */ 1137 1138 if (sc->sbm_state == sbmac_state_on) 1139 return; 1140 1141 /* 1142 * Bring the controller out of reset, but leave it off. 1143 */ 1144 1145 SBMAC_WRITECSR(sc->sbm_macenable, 0); 1146 1147 /* 1148 * Ignore all received packets 1149 */ 1150 1151 SBMAC_WRITECSR(sc->sbm_rxfilter, 0); 1152 1153 /* 1154 * Calculate values for various control registers. 1155 */ 1156 1157 cfg = M_MAC_RETRY_EN | 1158 M_MAC_TX_HOLD_SOP_EN | 1159 V_MAC_TX_PAUSE_CNT_16K | 1160 M_MAC_AP_STAT_EN | 1161 M_MAC_SS_EN | 1162 0; 1163 1164 fifo = V_MAC_TX_WR_THRSH(4) | /* Must be '4' or '8' */ 1165 V_MAC_TX_RD_THRSH(4) | 1166 V_MAC_TX_RL_THRSH(4) | 1167 V_MAC_RX_PL_THRSH(4) | 1168 V_MAC_RX_RD_THRSH(4) | /* Must be '4' */ 1169 V_MAC_RX_PL_THRSH(4) | 1170 V_MAC_RX_RL_THRSH(8) | 1171 0; 1172 1173 framecfg = V_MAC_MIN_FRAMESZ_DEFAULT | 1174 V_MAC_MAX_FRAMESZ_DEFAULT | 1175 V_MAC_BACKOFF_SEL(1); 1176 1177 /* 1178 * Clear out the hash address map 1179 */ 1180 1181 port = PKSEG1(sc->sbm_base + R_MAC_HASH_BASE); 1182 for (idx = 0; idx < MAC_HASH_COUNT; idx++) { 1183 SBMAC_WRITECSR(port, 0); 1184 port += sizeof(uint64_t); 1185 } 1186 1187 /* 1188 * Clear out the exact-match table 1189 */ 1190 1191 port = PKSEG1(sc->sbm_base + R_MAC_ADDR_BASE); 1192 for (idx = 0; idx < MAC_ADDR_COUNT; idx++) { 1193 SBMAC_WRITECSR(port, 0); 1194 port += sizeof(uint64_t); 1195 } 1196 1197 /* 1198 * Clear out the DMA Channel mapping table registers 1199 */ 1200 1201 port = PKSEG1(sc->sbm_base + R_MAC_CHUP0_BASE); 1202 for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) { 1203 SBMAC_WRITECSR(port, 0); 1204 port += sizeof(uint64_t); 1205 } 1206 1207 port = PKSEG1(sc->sbm_base + R_MAC_CHLO0_BASE); 1208 for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) { 1209 SBMAC_WRITECSR(port, 0); 1210 port += sizeof(uint64_t); 1211 } 1212 1213 /* 1214 * Program the hardware address. It goes into the hardware-address 1215 * register as well as the first filter register. 1216 */ 1217 1218 reg = sbmac_addr2reg(sc->sbm_hwaddr); 1219 1220 port = PKSEG1(sc->sbm_base + R_MAC_ADDR_BASE); 1221 SBMAC_WRITECSR(port, reg); 1222 port = PKSEG1(sc->sbm_base + R_MAC_ETHERNET_ADDR); 1223 SBMAC_WRITECSR(port, 0); // pass1 workaround 1224 1225 /* 1226 * Set the receive filter for no packets, and write values 1227 * to the various config registers 1228 */ 1229 1230 SBMAC_WRITECSR(sc->sbm_rxfilter, 0); 1231 SBMAC_WRITECSR(sc->sbm_imr, 0); 1232 SBMAC_WRITECSR(sc->sbm_framecfg, framecfg); 1233 SBMAC_WRITECSR(sc->sbm_fifocfg, fifo); 1234 SBMAC_WRITECSR(sc->sbm_maccfg, cfg); 1235 1236 /* 1237 * Initialize DMA channels (rings should be ok now) 1238 */ 1239 1240 sbdma_channel_start(&(sc->sbm_rxdma)); 1241 sbdma_channel_start(&(sc->sbm_txdma)); 1242 1243 /* 1244 * Configure the speed, duplex, and flow control 1245 */ 1246 1247 sbmac_set_speed(sc, sc->sbm_speed); 1248 sbmac_set_duplex(sc, sc->sbm_duplex, sc->sbm_fc); 1249 1250 /* 1251 * Fill the receive ring 1252 */ 1253 1254 sbdma_fillring(&(sc->sbm_rxdma)); 1255 1256 /* 1257 * Turn on the rest of the bits in the enable register 1258 */ 1259 1260 SBMAC_WRITECSR(sc->sbm_macenable, M_MAC_RXDMA_EN0 | M_MAC_TXDMA_EN0 | 1261 M_MAC_RX_ENABLE | M_MAC_TX_ENABLE); 1262 1263 1264 /* 1265 * Accept any kind of interrupt on TX and RX DMA channel 0 1266 */ 1267 SBMAC_WRITECSR(sc->sbm_imr, 1268 (M_MAC_INT_CHANNEL << S_MAC_TX_CH0) | 1269 (M_MAC_INT_CHANNEL << S_MAC_RX_CH0)); 1270 1271 /* 1272 * Enable receiving unicasts and broadcasts 1273 */ 1274 1275 SBMAC_WRITECSR(sc->sbm_rxfilter, M_MAC_UCAST_EN | M_MAC_BCAST_EN); 1276 1277 /* 1278 * On chips which support unaligned DMA features, set the descriptor 1279 * ring for transmit channels to use the unaligned buffer format. 1280 */ 1281 txdma = &(sc->sbm_txdma); 1282 1283 if (sc->sbm_pass3_dma) { 1284 dma_cfg0 = SBMAC_READCSR(txdma->sbdma_config0); 1285 dma_cfg0 |= V_DMA_DESC_TYPE(K_DMA_DESC_TYPE_RING_UAL_RMW) | 1286 M_DMA_TBX_EN | M_DMA_TDX_EN; 1287 SBMAC_WRITECSR(txdma->sbdma_config0, dma_cfg0); 1288 1289 fifo_cfg = SBMAC_READCSR(sc->sbm_fifocfg); 1290 fifo_cfg |= V_MAC_TX_WR_THRSH(8) | 1291 V_MAC_TX_RD_THRSH(8) | V_MAC_TX_RL_THRSH(8); 1292 SBMAC_WRITECSR(sc->sbm_fifocfg, fifo_cfg); 1293 } 1294 1295 /* 1296 * we're running now. 1297 */ 1298 1299 sc->sbm_state = sbmac_state_on; 1300 sc->sc_ethercom.ec_if.if_flags |= IFF_RUNNING; 1301 1302 /* 1303 * Program multicast addresses 1304 */ 1305 1306 sbmac_setmulti(sc); 1307 1308 /* 1309 * If channel was in promiscuous mode before, turn that on 1310 */ 1311 1312 if (sc->sc_ethercom.ec_if.if_flags & IFF_PROMISC) 1313 sbmac_promiscuous_mode(sc, true); 1314 1315 /* 1316 * Turn on the once-per-second timer 1317 */ 1318 1319 callout_reset(&(sc->sc_tick_ch), hz, sbmac_tick, sc); 1320 } 1321 1322 /* 1323 * SBMAC_CHANNEL_STOP(s) 1324 * 1325 * Stop packet processing on this MAC. 1326 * 1327 * Input parameters: 1328 * sc - sbmac structure 1329 * 1330 * Return value: 1331 * nothing 1332 */ 1333 1334 static void 1335 sbmac_channel_stop(struct sbmac_softc *sc) 1336 { 1337 uint64_t ctl; 1338 1339 /* don't do this if already stopped */ 1340 1341 if (sc->sbm_state == sbmac_state_off) 1342 return; 1343 1344 /* don't accept any packets, disable all interrupts */ 1345 1346 SBMAC_WRITECSR(sc->sbm_rxfilter, 0); 1347 SBMAC_WRITECSR(sc->sbm_imr, 0); 1348 1349 /* Turn off ticker */ 1350 1351 callout_stop(&(sc->sc_tick_ch)); 1352 1353 /* turn off receiver and transmitter */ 1354 1355 ctl = SBMAC_READCSR(sc->sbm_macenable); 1356 ctl &= ~(M_MAC_RXDMA_EN0 | M_MAC_TXDMA_EN0); 1357 SBMAC_WRITECSR(sc->sbm_macenable, ctl); 1358 1359 /* We're stopped now. */ 1360 1361 sc->sbm_state = sbmac_state_off; 1362 sc->sc_ethercom.ec_if.if_flags &= ~IFF_RUNNING; 1363 1364 /* Empty the receive and transmit rings */ 1365 1366 sbdma_emptyring(&(sc->sbm_rxdma)); 1367 sbdma_emptyring(&(sc->sbm_txdma)); 1368 } 1369 1370 /* 1371 * SBMAC_SET_CHANNEL_STATE(state) 1372 * 1373 * Set the channel's state ON or OFF 1374 * 1375 * Input parameters: 1376 * state - new state 1377 * 1378 * Return value: 1379 * old state 1380 */ 1381 1382 static sbmac_state_t 1383 sbmac_set_channel_state(struct sbmac_softc *sc, sbmac_state_t state) 1384 { 1385 sbmac_state_t oldstate = sc->sbm_state; 1386 1387 /* 1388 * If same as previous state, return 1389 */ 1390 1391 if (state == oldstate) 1392 return oldstate; 1393 1394 /* 1395 * If new state is ON, turn channel on 1396 */ 1397 1398 if (state == sbmac_state_on) 1399 sbmac_channel_start(sc); 1400 else 1401 sbmac_channel_stop(sc); 1402 1403 /* 1404 * Return previous state 1405 */ 1406 1407 return oldstate; 1408 } 1409 1410 /* 1411 * SBMAC_PROMISCUOUS_MODE(sc, enabled) 1412 * 1413 * Turn on or off promiscuous mode 1414 * 1415 * Input parameters: 1416 * sc - softc 1417 * enabled - true to turn on, false to turn off 1418 * 1419 * Return value: 1420 * nothing 1421 */ 1422 1423 static void 1424 sbmac_promiscuous_mode(struct sbmac_softc *sc, bool enabled) 1425 { 1426 uint64_t reg; 1427 1428 if (sc->sbm_state != sbmac_state_on) 1429 return; 1430 1431 if (enabled) { 1432 reg = SBMAC_READCSR(sc->sbm_rxfilter); 1433 reg |= M_MAC_ALLPKT_EN; 1434 SBMAC_WRITECSR(sc->sbm_rxfilter, reg); 1435 } else { 1436 reg = SBMAC_READCSR(sc->sbm_rxfilter); 1437 reg &= ~M_MAC_ALLPKT_EN; 1438 SBMAC_WRITECSR(sc->sbm_rxfilter, reg); 1439 } 1440 } 1441 1442 /* 1443 * SBMAC_INIT_AND_START(sc) 1444 * 1445 * Stop the channel and restart it. This is generally used 1446 * when we have to do something to the channel that requires 1447 * a swift kick. 1448 * 1449 * Input parameters: 1450 * sc - softc 1451 */ 1452 1453 static void 1454 sbmac_init_and_start(struct sbmac_softc *sc) 1455 { 1456 int s; 1457 1458 s = splnet(); 1459 1460 mii_pollstat(&sc->sc_mii); /* poll phy for current speed */ 1461 sbmac_mii_statchg(&sc->sc_ethercom.ec_if); /* set state to new speed */ 1462 sbmac_set_channel_state(sc, sbmac_state_on); 1463 1464 splx(s); 1465 } 1466 1467 /* 1468 * SBMAC_ADDR2REG(ptr) 1469 * 1470 * Convert six bytes into the 64-bit register value that 1471 * we typically write into the SBMAC's address/mcast registers 1472 * 1473 * Input parameters: 1474 * ptr - pointer to 6 bytes 1475 * 1476 * Return value: 1477 * register value 1478 */ 1479 1480 static uint64_t 1481 sbmac_addr2reg(u_char *ptr) 1482 { 1483 uint64_t reg = 0; 1484 1485 ptr += 6; 1486 1487 reg |= (uint64_t) *(--ptr); 1488 reg <<= 8; 1489 reg |= (uint64_t) *(--ptr); 1490 reg <<= 8; 1491 reg |= (uint64_t) *(--ptr); 1492 reg <<= 8; 1493 reg |= (uint64_t) *(--ptr); 1494 reg <<= 8; 1495 reg |= (uint64_t) *(--ptr); 1496 reg <<= 8; 1497 reg |= (uint64_t) *(--ptr); 1498 1499 return reg; 1500 } 1501 1502 /* 1503 * SBMAC_SET_SPEED(sc, speed) 1504 * 1505 * Configure LAN speed for the specified MAC. 1506 * Warning: must be called when MAC is off! 1507 * 1508 * Input parameters: 1509 * sc - sbmac structure 1510 * speed - speed to set MAC to (see sbmac_speed_t enum) 1511 * 1512 * Return value: 1513 * true if successful 1514 * false indicates invalid parameters 1515 */ 1516 1517 static bool 1518 sbmac_set_speed(struct sbmac_softc *sc, sbmac_speed_t speed) 1519 { 1520 uint64_t cfg; 1521 uint64_t framecfg; 1522 1523 /* 1524 * Save new current values 1525 */ 1526 1527 sc->sbm_speed = speed; 1528 1529 if (sc->sbm_state != sbmac_state_off) 1530 panic("sbmac_set_speed while MAC not off"); 1531 1532 /* 1533 * Read current register values 1534 */ 1535 1536 cfg = SBMAC_READCSR(sc->sbm_maccfg); 1537 framecfg = SBMAC_READCSR(sc->sbm_framecfg); 1538 1539 /* 1540 * Mask out the stuff we want to change 1541 */ 1542 1543 cfg &= ~(M_MAC_BURST_EN | M_MAC_SPEED_SEL); 1544 framecfg &= ~(M_MAC_IFG_RX | M_MAC_IFG_TX | M_MAC_IFG_THRSH | 1545 M_MAC_SLOT_SIZE); 1546 1547 /* 1548 * Now add in the new bits 1549 */ 1550 1551 switch (speed) { 1552 case sbmac_speed_10: 1553 framecfg |= V_MAC_IFG_RX_10 | 1554 V_MAC_IFG_TX_10 | 1555 K_MAC_IFG_THRSH_10 | 1556 V_MAC_SLOT_SIZE_10; 1557 cfg |= V_MAC_SPEED_SEL_10MBPS; 1558 break; 1559 1560 case sbmac_speed_100: 1561 framecfg |= V_MAC_IFG_RX_100 | 1562 V_MAC_IFG_TX_100 | 1563 V_MAC_IFG_THRSH_100 | 1564 V_MAC_SLOT_SIZE_100; 1565 cfg |= V_MAC_SPEED_SEL_100MBPS ; 1566 break; 1567 1568 case sbmac_speed_1000: 1569 framecfg |= V_MAC_IFG_RX_1000 | 1570 V_MAC_IFG_TX_1000 | 1571 V_MAC_IFG_THRSH_1000 | 1572 V_MAC_SLOT_SIZE_1000; 1573 cfg |= V_MAC_SPEED_SEL_1000MBPS | M_MAC_BURST_EN; 1574 break; 1575 1576 case sbmac_speed_auto: /* XXX not implemented */ 1577 /* fall through */ 1578 default: 1579 return false; 1580 } 1581 1582 /* 1583 * Send the bits back to the hardware 1584 */ 1585 1586 SBMAC_WRITECSR(sc->sbm_framecfg, framecfg); 1587 SBMAC_WRITECSR(sc->sbm_maccfg, cfg); 1588 1589 return true; 1590 } 1591 1592 /* 1593 * SBMAC_SET_DUPLEX(sc, duplex, fc) 1594 * 1595 * Set Ethernet duplex and flow control options for this MAC 1596 * Warning: must be called when MAC is off! 1597 * 1598 * Input parameters: 1599 * sc - sbmac structure 1600 * duplex - duplex setting (see sbmac_duplex_t) 1601 * fc - flow control setting (see sbmac_fc_t) 1602 * 1603 * Return value: 1604 * true if ok 1605 * false if an invalid parameter combination was specified 1606 */ 1607 1608 static bool 1609 sbmac_set_duplex(struct sbmac_softc *sc, sbmac_duplex_t duplex, sbmac_fc_t fc) 1610 { 1611 uint64_t cfg; 1612 1613 /* 1614 * Save new current values 1615 */ 1616 1617 sc->sbm_duplex = duplex; 1618 sc->sbm_fc = fc; 1619 1620 if (sc->sbm_state != sbmac_state_off) 1621 panic("sbmac_set_duplex while MAC not off"); 1622 1623 /* 1624 * Read current register values 1625 */ 1626 1627 cfg = SBMAC_READCSR(sc->sbm_maccfg); 1628 1629 /* 1630 * Mask off the stuff we're about to change 1631 */ 1632 1633 cfg &= ~(M_MAC_FC_SEL | M_MAC_FC_CMD | M_MAC_HDX_EN); 1634 1635 switch (duplex) { 1636 case sbmac_duplex_half: 1637 switch (fc) { 1638 case sbmac_fc_disabled: 1639 cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_DISABLED; 1640 break; 1641 1642 case sbmac_fc_collision: 1643 cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENABLED; 1644 break; 1645 1646 case sbmac_fc_carrier: 1647 cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENAB_FALSECARR; 1648 break; 1649 1650 case sbmac_fc_auto: /* XXX not implemented */ 1651 /* fall through */ 1652 case sbmac_fc_frame: /* not valid in half duplex */ 1653 default: /* invalid selection */ 1654 panic("%s: invalid half duplex fc selection %d", 1655 device_xname(sc->sc_dev), fc); 1656 return false; 1657 } 1658 break; 1659 1660 case sbmac_duplex_full: 1661 switch (fc) { 1662 case sbmac_fc_disabled: 1663 cfg |= V_MAC_FC_CMD_DISABLED; 1664 break; 1665 1666 case sbmac_fc_frame: 1667 cfg |= V_MAC_FC_CMD_ENABLED; 1668 break; 1669 1670 case sbmac_fc_collision: /* not valid in full duplex */ 1671 case sbmac_fc_carrier: /* not valid in full duplex */ 1672 case sbmac_fc_auto: /* XXX not implemented */ 1673 /* fall through */ 1674 default: 1675 panic("%s: invalid full duplex fc selection %d", 1676 device_xname(sc->sc_dev), fc); 1677 return false; 1678 } 1679 break; 1680 1681 default: 1682 /* fall through */ 1683 case sbmac_duplex_auto: 1684 panic("%s: bad duplex %d", device_xname(sc->sc_dev), duplex); 1685 /* XXX not implemented */ 1686 break; 1687 } 1688 1689 /* 1690 * Send the bits back to the hardware 1691 */ 1692 1693 SBMAC_WRITECSR(sc->sbm_maccfg, cfg); 1694 1695 return true; 1696 } 1697 1698 /* 1699 * SBMAC_INTR() 1700 * 1701 * Interrupt handler for MAC interrupts 1702 * 1703 * Input parameters: 1704 * MAC structure 1705 * 1706 * Return value: 1707 * nothing 1708 */ 1709 1710 /* ARGSUSED */ 1711 static void 1712 sbmac_intr(void *xsc, uint32_t status, vaddr_t pc) 1713 { 1714 struct sbmac_softc *sc = xsc; 1715 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1716 uint64_t isr; 1717 1718 for (;;) { 1719 1720 /* 1721 * Read the ISR (this clears the bits in the real register) 1722 */ 1723 1724 isr = SBMAC_READCSR(sc->sbm_isr); 1725 1726 if (isr == 0) 1727 break; 1728 1729 /* 1730 * Transmits on channel 0 1731 */ 1732 1733 if (isr & (M_MAC_INT_CHANNEL << S_MAC_TX_CH0)) { 1734 sbdma_tx_process(sc, &(sc->sbm_txdma)); 1735 SBMAC_EVCNT_INCR(sc->sbm_ev_txintr); 1736 } 1737 1738 /* 1739 * Receives on channel 0 1740 */ 1741 1742 if (isr & (M_MAC_INT_CHANNEL << S_MAC_RX_CH0)) { 1743 sbdma_rx_process(sc, &(sc->sbm_rxdma)); 1744 SBMAC_EVCNT_INCR(sc->sbm_ev_rxintr); 1745 } 1746 } 1747 1748 /* try to get more packets going */ 1749 if_schedule_deferred_start(ifp); 1750 } 1751 1752 1753 /* 1754 * SBMAC_START(ifp) 1755 * 1756 * Start output on the specified interface. Basically, we 1757 * queue as many buffers as we can until the ring fills up, or 1758 * we run off the end of the queue, whichever comes first. 1759 * 1760 * Input parameters: 1761 * ifp - interface 1762 * 1763 * Return value: 1764 * nothing 1765 */ 1766 1767 static void 1768 sbmac_start(struct ifnet *ifp) 1769 { 1770 struct sbmac_softc *sc; 1771 struct mbuf *m_head = NULL; 1772 int rv; 1773 1774 if ((ifp->if_flags & IFF_RUNNING) == 0) 1775 return; 1776 1777 sc = ifp->if_softc; 1778 1779 for (;;) { 1780 1781 IF_POLL(&ifp->if_snd, m_head); 1782 if (m_head == NULL) 1783 break; 1784 1785 /* 1786 * Put the buffer on the transmit ring. If we 1787 * don't have room, we'll try to get things going 1788 * again after a transmit interrupt. 1789 */ 1790 1791 rv = sbdma_add_txbuffer(&(sc->sbm_txdma), m_head); 1792 1793 if (rv == 0) { 1794 /* 1795 * If there's a BPF listener, bounce a copy of this 1796 * frame to it. 1797 */ 1798 IF_DEQUEUE(&ifp->if_snd, m_head); 1799 bpf_mtap(ifp, m_head, BPF_D_OUT); 1800 if (!sc->sbm_pass3_dma) { 1801 /* 1802 * Don't free mbuf if we're not copying to new 1803 * mbuf in sbdma_add_txbuffer. It will be 1804 * freed in sbdma_tx_process. 1805 */ 1806 m_freem(m_head); 1807 } 1808 } 1809 } 1810 } 1811 1812 /* 1813 * SBMAC_SETMULTI(sc) 1814 * 1815 * Reprogram the multicast table into the hardware, given 1816 * the list of multicasts associated with the interface 1817 * structure. 1818 * 1819 * Input parameters: 1820 * sc - softc 1821 * 1822 * Return value: 1823 * nothing 1824 */ 1825 1826 static void 1827 sbmac_setmulti(struct sbmac_softc *sc) 1828 { 1829 struct ethercom *ec = &sc->sc_ethercom; 1830 struct ifnet *ifp = &ec->ec_if; 1831 uint64_t reg; 1832 sbmac_port_t port; 1833 int idx; 1834 struct ether_multi *enm; 1835 struct ether_multistep step; 1836 1837 /* 1838 * Clear out entire multicast table. We do this by nuking 1839 * the entire hash table and all the direct matches except 1840 * the first one, which is used for our station address 1841 */ 1842 1843 for (idx = 1; idx < MAC_ADDR_COUNT; idx++) { 1844 port = PKSEG1(sc->sbm_base + 1845 R_MAC_ADDR_BASE+(idx*sizeof(uint64_t))); 1846 SBMAC_WRITECSR(port, 0); 1847 } 1848 1849 for (idx = 0; idx < MAC_HASH_COUNT; idx++) { 1850 port = PKSEG1(sc->sbm_base + 1851 R_MAC_HASH_BASE+(idx*sizeof(uint64_t))); 1852 SBMAC_WRITECSR(port, 0); 1853 } 1854 1855 /* 1856 * Clear the filter to say we don't want any multicasts. 1857 */ 1858 1859 reg = SBMAC_READCSR(sc->sbm_rxfilter); 1860 reg &= ~(M_MAC_MCAST_INV | M_MAC_MCAST_EN); 1861 SBMAC_WRITECSR(sc->sbm_rxfilter, reg); 1862 1863 if (ifp->if_flags & IFF_ALLMULTI) { 1864 /* 1865 * Enable ALL multicasts. Do this by inverting the 1866 * multicast enable bit. 1867 */ 1868 reg = SBMAC_READCSR(sc->sbm_rxfilter); 1869 reg |= (M_MAC_MCAST_INV | M_MAC_MCAST_EN); 1870 SBMAC_WRITECSR(sc->sbm_rxfilter, reg); 1871 return; 1872 } 1873 1874 /* 1875 * Program new multicast entries. For now, only use the 1876 * perfect filter. In the future we'll need to use the 1877 * hash filter if the perfect filter overflows 1878 */ 1879 1880 /* 1881 * XXX only using perfect filter for now, need to use hash 1882 * XXX if the table overflows 1883 */ 1884 1885 idx = 1; /* skip station address */ 1886 ETHER_LOCK(ec); 1887 ETHER_FIRST_MULTI(step, ec, enm); 1888 while ((enm != NULL) && (idx < MAC_ADDR_COUNT)) { 1889 reg = sbmac_addr2reg(enm->enm_addrlo); 1890 port = PKSEG1(sc->sbm_base + 1891 R_MAC_ADDR_BASE+(idx*sizeof(uint64_t))); 1892 SBMAC_WRITECSR(port, reg); 1893 idx++; 1894 ETHER_NEXT_MULTI(step, enm); 1895 } 1896 ETHER_UNLOCK(ec); 1897 1898 /* 1899 * Enable the "accept multicast bits" if we programmed at least one 1900 * multicast. 1901 */ 1902 1903 if (idx > 1) { 1904 reg = SBMAC_READCSR(sc->sbm_rxfilter); 1905 reg |= M_MAC_MCAST_EN; 1906 SBMAC_WRITECSR(sc->sbm_rxfilter, reg); 1907 } 1908 } 1909 1910 /* 1911 * SBMAC_ETHER_IOCTL(ifp, cmd, data) 1912 * 1913 * Generic IOCTL requests for this interface. The basic 1914 * stuff is handled here for bringing the interface up, 1915 * handling multicasts, etc. 1916 * 1917 * Input parameters: 1918 * ifp - interface structure 1919 * cmd - command code 1920 * data - pointer to data 1921 * 1922 * Return value: 1923 * return value (0 is success) 1924 */ 1925 1926 static int 1927 sbmac_ether_ioctl(struct ifnet *ifp, u_long cmd, void *data) 1928 { 1929 struct ifaddr *ifa = (struct ifaddr *) data; 1930 struct sbmac_softc *sc = ifp->if_softc; 1931 1932 switch (cmd) { 1933 case SIOCINITIFADDR: 1934 ifp->if_flags |= IFF_UP; 1935 1936 switch (ifa->ifa_addr->sa_family) { 1937 #ifdef INET 1938 case AF_INET: 1939 sbmac_init_and_start(sc); 1940 arp_ifinit(ifp, ifa); 1941 break; 1942 #endif 1943 default: 1944 sbmac_init_and_start(sc); 1945 break; 1946 } 1947 break; 1948 1949 default: 1950 return ENOTTY; 1951 } 1952 1953 return 0; 1954 } 1955 1956 /* 1957 * SBMAC_IOCTL(ifp, cmd, data) 1958 * 1959 * Main IOCTL handler - dispatches to other IOCTLs for various 1960 * types of requests. 1961 * 1962 * Input parameters: 1963 * ifp - interface pointer 1964 * cmd - command code 1965 * data - pointer to argument data 1966 * 1967 * Return value: 1968 * 0 if ok 1969 * else error code 1970 */ 1971 1972 static int 1973 sbmac_ioctl(struct ifnet *ifp, u_long cmd, void *data) 1974 { 1975 struct sbmac_softc *sc = ifp->if_softc; 1976 struct ifreq *ifr = (struct ifreq *) data; 1977 int s, error = 0; 1978 1979 s = splnet(); 1980 1981 switch (cmd) { 1982 case SIOCINITIFADDR: 1983 error = sbmac_ether_ioctl(ifp, cmd, data); 1984 break; 1985 case SIOCSIFMTU: 1986 if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > ETHERMTU) 1987 error = EINVAL; 1988 else if ((error = ifioctl_common(ifp, cmd, data)) == ENETRESET) 1989 /* XXX Program new MTU here */ 1990 error = 0; 1991 break; 1992 case SIOCSIFFLAGS: 1993 if ((error = ifioctl_common(ifp, cmd, data)) != 0) 1994 break; 1995 if (ifp->if_flags & IFF_UP) { 1996 /* 1997 * If only the state of the PROMISC flag changed, 1998 * just tweak the hardware registers. 1999 */ 2000 if ((ifp->if_flags & IFF_RUNNING) && 2001 (ifp->if_flags & IFF_PROMISC)) { 2002 /* turn on promiscuous mode */ 2003 sbmac_promiscuous_mode(sc, true); 2004 } else if (ifp->if_flags & IFF_RUNNING && 2005 !(ifp->if_flags & IFF_PROMISC)) { 2006 /* turn off promiscuous mode */ 2007 sbmac_promiscuous_mode(sc, false); 2008 } else 2009 sbmac_set_channel_state(sc, sbmac_state_on); 2010 } else { 2011 if (ifp->if_flags & IFF_RUNNING) 2012 sbmac_set_channel_state(sc, sbmac_state_off); 2013 } 2014 2015 sc->sbm_if_flags = ifp->if_flags; 2016 error = 0; 2017 break; 2018 2019 default: 2020 if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) { 2021 error = 0; 2022 if (ifp->if_flags & IFF_RUNNING) 2023 sbmac_setmulti(sc); 2024 } 2025 break; 2026 } 2027 2028 (void)splx(s); 2029 2030 return error; 2031 } 2032 2033 /* 2034 * SBMAC_IFMEDIA_UPD(ifp) 2035 * 2036 * Configure an appropriate media type for this interface, 2037 * given the data in the interface structure 2038 * 2039 * Input parameters: 2040 * ifp - interface 2041 * 2042 * Return value: 2043 * 0 if ok 2044 * else error code 2045 */ 2046 2047 /* 2048 * SBMAC_IFMEDIA_STS(ifp, ifmr) 2049 * 2050 * Report current media status (used by ifconfig, for example) 2051 * 2052 * Input parameters: 2053 * ifp - interface structure 2054 * ifmr - media request structure 2055 * 2056 * Return value: 2057 * nothing 2058 */ 2059 2060 /* 2061 * SBMAC_WATCHDOG(ifp) 2062 * 2063 * Called periodically to make sure we're still happy. 2064 * 2065 * Input parameters: 2066 * ifp - interface structure 2067 * 2068 * Return value: 2069 * nothing 2070 */ 2071 2072 static void 2073 sbmac_watchdog(struct ifnet *ifp) 2074 { 2075 2076 /* XXX do something */ 2077 } 2078 2079 /* 2080 * One second timer, used to tick MII. 2081 */ 2082 static void 2083 sbmac_tick(void *arg) 2084 { 2085 struct sbmac_softc *sc = arg; 2086 int s; 2087 2088 s = splnet(); 2089 mii_tick(&sc->sc_mii); 2090 splx(s); 2091 2092 callout_reset(&sc->sc_tick_ch, hz, sbmac_tick, sc); 2093 } 2094 2095 2096 /* 2097 * SBMAC_MATCH(parent, match, aux) 2098 * 2099 * Part of the config process - see if this device matches the 2100 * info about what we expect to find on the bus. 2101 * 2102 * Input parameters: 2103 * parent - parent bus structure 2104 * match - 2105 * aux - bus-specific args 2106 * 2107 * Return value: 2108 * 1 if we match 2109 * 0 if we don't match 2110 */ 2111 2112 static int 2113 sbmac_match(device_t parent, cfdata_t match, void *aux) 2114 { 2115 struct sbobio_attach_args *sa = aux; 2116 2117 /* 2118 * Make sure it's a MAC 2119 */ 2120 if (sa->sa_locs.sa_type != SBOBIO_DEVTYPE_MAC) 2121 return 0; 2122 2123 /* 2124 * Yup, it is. 2125 */ 2126 2127 return 1; 2128 } 2129 2130 /* 2131 * SBMAC_PARSE_XDIGIT(str) 2132 * 2133 * Parse a hex digit, returning its value 2134 * 2135 * Input parameters: 2136 * str - character 2137 * 2138 * Return value: 2139 * hex value, or -1 if invalid 2140 */ 2141 2142 static int 2143 sbmac_parse_xdigit(char str) 2144 { 2145 int digit; 2146 2147 if ((str >= '0') && (str <= '9')) 2148 digit = str - '0'; 2149 else if ((str >= 'a') && (str <= 'f')) 2150 digit = str - 'a' + 10; 2151 else if ((str >= 'A') && (str <= 'F')) 2152 digit = str - 'A' + 10; 2153 else 2154 digit = -1; 2155 2156 return digit; 2157 } 2158 2159 /* 2160 * SBMAC_PARSE_HWADDR(str, hwaddr) 2161 * 2162 * Convert a string in the form xx:xx:xx:xx:xx:xx into a 6-byte 2163 * Ethernet address. 2164 * 2165 * Input parameters: 2166 * str - string 2167 * hwaddr - pointer to hardware address 2168 * 2169 * Return value: 2170 * 0 if ok, else -1 2171 */ 2172 2173 static int 2174 sbmac_parse_hwaddr(const char *str, u_char *hwaddr) 2175 { 2176 int digit1, digit2; 2177 int idx = 6; 2178 2179 while (*str && (idx > 0)) { 2180 digit1 = sbmac_parse_xdigit(*str); 2181 if (digit1 < 0) 2182 return -1; 2183 str++; 2184 if (!*str) 2185 return -1; 2186 2187 if ((*str == ':') || (*str == '-')) { 2188 digit2 = digit1; 2189 digit1 = 0; 2190 } else { 2191 digit2 = sbmac_parse_xdigit(*str); 2192 if (digit2 < 0) 2193 return -1; 2194 str++; 2195 } 2196 2197 *hwaddr++ = (digit1 << 4) | digit2; 2198 idx--; 2199 2200 if (*str == '-') 2201 str++; 2202 if (*str == ':') 2203 str++; 2204 } 2205 return 0; 2206 } 2207 2208 /* 2209 * SBMAC_ATTACH(parent, self, aux) 2210 * 2211 * Attach routine - init hardware and hook ourselves into NetBSD. 2212 * 2213 * Input parameters: 2214 * parent - parent bus device 2215 * self - our softc 2216 * aux - attach data 2217 * 2218 * Return value: 2219 * nothing 2220 */ 2221 2222 static void 2223 sbmac_attach(device_t parent, device_t self, void *aux) 2224 { 2225 struct sbmac_softc * const sc = device_private(self); 2226 struct ifnet * const ifp = &sc->sc_ethercom.ec_if; 2227 struct mii_data * const mii = &sc->sc_mii; 2228 struct sbobio_attach_args * const sa = aux; 2229 u_char *eaddr; 2230 static int unit = 0; /* XXX */ 2231 uint64_t ea_reg; 2232 int idx; 2233 2234 sc->sc_dev = self; 2235 2236 /* Determine controller base address */ 2237 2238 sc->sbm_base = sa->sa_base + sa->sa_locs.sa_offset; 2239 2240 eaddr = sc->sbm_hwaddr; 2241 2242 /* 2243 * Initialize context (get pointers to registers and stuff), then 2244 * allocate the memory for the descriptor tables. 2245 */ 2246 2247 sbmac_initctx(sc); 2248 2249 callout_init(&(sc->sc_tick_ch), 0); 2250 2251 /* 2252 * Read the ethernet address. The firmware left this programmed 2253 * for us in the ethernet address register for each mac. 2254 */ 2255 2256 ea_reg = SBMAC_READCSR(PKSEG1(sc->sbm_base + R_MAC_ETHERNET_ADDR)); 2257 for (idx = 0; idx < 6; idx++) { 2258 eaddr[idx] = (uint8_t) (ea_reg & 0xFF); 2259 ea_reg >>= 8; 2260 } 2261 2262 #define SBMAC_DEFAULT_HWADDR "40:00:00:00:01:00" 2263 if (eaddr[0] == 0 && eaddr[1] == 0 && eaddr[2] == 0 && 2264 eaddr[3] == 0 && eaddr[4] == 0 && eaddr[5] == 0) { 2265 sbmac_parse_hwaddr(SBMAC_DEFAULT_HWADDR, eaddr); 2266 eaddr[5] = unit; 2267 } 2268 2269 #ifdef SBMAC_ETH0_HWADDR 2270 if (unit == 0) 2271 sbmac_parse_hwaddr(SBMAC_ETH0_HWADDR, eaddr); 2272 #endif 2273 #ifdef SBMAC_ETH1_HWADDR 2274 if (unit == 1) 2275 sbmac_parse_hwaddr(SBMAC_ETH1_HWADDR, eaddr); 2276 #endif 2277 #ifdef SBMAC_ETH2_HWADDR 2278 if (unit == 2) 2279 sbmac_parse_hwaddr(SBMAC_ETH2_HWADDR, eaddr); 2280 #endif 2281 unit++; 2282 2283 /* 2284 * Display Ethernet address (this is called during the config process 2285 * so we need to finish off the config message that was being displayed) 2286 */ 2287 aprint_normal(": Ethernet%s\n", 2288 sc->sbm_pass3_dma ? ", using unaligned tx DMA" : ""); 2289 aprint_normal_dev(self, "Ethernet address %s\n", ether_sprintf(eaddr)); 2290 2291 2292 /* 2293 * Set up ifnet structure 2294 */ 2295 2296 ifp->if_softc = sc; 2297 memcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ); 2298 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 2299 ifp->if_ioctl = sbmac_ioctl; 2300 ifp->if_start = sbmac_start; 2301 ifp->if_watchdog = sbmac_watchdog; 2302 ifp->if_snd.ifq_maxlen = SBMAC_MAX_TXDESCR - 1; 2303 2304 /* 2305 * Set up ifmedia support. 2306 */ 2307 2308 /* 2309 * Initialize MII/media info. 2310 */ 2311 mii->mii_ifp = ifp; 2312 mii->mii_readreg = sbmac_mii_readreg; 2313 mii->mii_writereg = sbmac_mii_writereg; 2314 mii->mii_statchg = sbmac_mii_statchg; 2315 sc->sc_ethercom.ec_mii = mii; 2316 ifmedia_init(&mii->mii_media, 0, ether_mediachange, ether_mediastatus); 2317 mii_attach(sc->sc_dev, mii, 0xffffffff, MII_PHY_ANY, 2318 MII_OFFSET_ANY, 0); 2319 2320 if (LIST_FIRST(&mii->mii_phys) == NULL) { 2321 ifmedia_add(&mii->mii_media, IFM_ETHER | IFM_NONE, 0, NULL); 2322 ifmedia_set(&mii->mii_media, IFM_ETHER | IFM_NONE); 2323 } else 2324 ifmedia_set(&mii->mii_media, IFM_ETHER | IFM_AUTO); 2325 2326 /* 2327 * map/route interrupt 2328 */ 2329 2330 sc->sbm_intrhand = cpu_intr_establish(sa->sa_locs.sa_intr[0], IPL_NET, 2331 sbmac_intr, sc); 2332 2333 /* 2334 * Call MI attach routines. 2335 */ 2336 if_attach(ifp); 2337 if_deferred_start_init(ifp, NULL); 2338 ether_ifattach(ifp, eaddr); 2339 } 2340
Indexes created Tue Sep 23 02:09:52 GMT 2025