Searched refs:GPIO (Results 1 - 25 of 324) sorted by relevance

1234567891011>>

/src/sys/arch/hpcarm/dev/
H A Dipaq_gpioreg.h58 Extended GPIO
78 #define GPIO_H3600_POWER_BUTTON GPIO (0)
79 #define GPIO_H3600_CLK_SET0 GPIO (12)
80 #define GPIO_H3600_CLK_SET1 GPIO (13)
81 #define GPIO_H3600_PCMCIA_CD0 GPIO (17)
82 #define GPIO_H3600_PCMCIA_CD1 GPIO (10)
83 #define GPIO_H3600_PCMCIA_IRQ0 GPIO (21)
84 #define GPIO_H3600_PCMCIA_IRQ1 GPIO (11)
85 #define GPIO_H3600_L3_DATA GPIO (14)
86 #define GPIO_H3600_L3_MODE GPIO (1
[all...]
/src/sys/external/gpl2/dts/dist/arch/arm64/boot/dts/bitmain/
H A Dbm1880-sophon-edge.dts12 * GPIO name legend: proper name = the GPIO line is used as GPIO
15 * "[PER]" = pin is muxed for [peripheral] (not GPIO)
29 * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L"
30 * are the only ones actually used for GPIO.
56 "GPIO-A", /* GPIO0, LSEC pin 23 */
57 "GPIO
[all...]
/src/sys/external/gpl2/dts/dist/arch/arm64/boot/dts/hisilicon/
H A Dhi3798cv200-poplar.dts108 gpio-line-names = "GPIO-E", "",
110 "", "GPIO-F",
111 "", "GPIO-J";
116 gpio-line-names = "GPIO-H", "GPIO-I",
117 "GPIO-L", "GPIO-G",
118 "GPIO-K", "",
126 "GPIO-C", "",
127 "", "GPIO
[all...]
H A Dhi3670-hikey970.dts59 * Legend: proper name = the GPIO line is used as GPIO
62 * "[PER]" = pin is muxed for [peripheral] (not GPIO)
79 * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
80 * ones actually used for GPIO.
103 "GPIO-I", /* LSEC pin 31: GPIO_013_CAM0_RST_N */
111 "GPIO-G", /* LSEC pin 29: GPIO_016_LCD_TE0 */
129 "GPIO
[all...]
H A Dhi6220-hikey.dts117 /* WLAN_EN GPIO */
348 * Legend: proper name = the GPIO line is used as GPIO
350 * "[PER]" = pin is muxed for peripheral (not GPIO)
368 * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
369 * ones actually used for GPIO.
384 "GPIO-A", /* LSEC Pin 23: GPIO2_0 */
385 "GPIO
[all...]
/src/sys/arch/arm/sa11x0/
H A Dsa11x0_gpioreg.h32 * SA-11x0 GPIO Register
37 /* GPIO pin-level register */
40 /* GPIO pin direction register */
43 /* GPIO pin output set register */
46 /* GPIO pin output clear register */
49 /* GPIO rising-edge detect register */
52 /* GPIO falling-edge detect register */
55 /* GPIO edge-detect status register */
58 /* GPIO alternate function register */
62 #define GPIO( macro
[all...]
/src/sys/external/gpl2/dts/dist/arch/arm/boot/dts/hisilicon/
H A Dhi3620-hi4511.dts71 0x008 0x0 /* GPIO -- eFUSE_DOUT */
95 0x0f8 0x1 /* GPIO (IOMG61) */
96 0x0fc 0x1 /* GPIO (IOMG62) */
107 0x104 0x1 /* GPIO (IOMG96) */
108 0x108 0x1 /* GPIO (IOMG64) */
119 0x160 0x1 /* GPIO (IOMG85) */
120 0x164 0x1 /* GPIO (IOMG86) */
132 0x168 0x1 /* GPIO (IOMG87) */
133 0x16c 0x1 /* GPIO (IOMG88) */
134 0x170 0x1 /* GPIO (IOMG9
[all...]
/src/sys/external/gpl2/dts/dist/arch/arm/boot/dts/nxp/imx/
H A Dimx6ull-dhcom-pdk2.dts30 enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; /* GPIO G */
39 gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* GPIO A */
40 label = "TA1-GPIO-A";
46 gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; /* GPIO B */
47 label = "TA2-GPIO-B";
53 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
54 label = "TA3-GPIO-C";
60 gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; /* GPIO D */
61 label = "TA4-GPIO-D";
71 * Disable PDK2 LED5, because GPIO
[all...]
H A Dimx6qdl-dhcom-pdk2.dtsi27 enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */
63 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* GPIO A */
64 label = "TA1-GPIO-A";
72 gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* GPIO B */
73 label = "TA2-GPIO-B";
81 gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; /* GPIO C */
82 label = "TA3-GPIO-C";
90 gpios = <&gpio6 3 GPIO_ACTIVE_LOW>; /* GPIO D */
91 label = "TA4-GPIO-D";
103 * Disable led-5, because GPIO
[all...]
H A Dimx6qdl-dhcom-drc02.dtsi26 * GPIO line, however the i.MX6 UART driver assumes RX happens
32 gpios = <18 0>; /* GPIO Q */
74 * for rts/cts. So configure DHCOM GPIO I as rts and GPIO M as cts.
77 cts-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; /* GPIO M */
80 rts-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
86 * controlled by DHCOM GPIO P. So remove rts/cts pins and the property
87 * uart-has-rtscts from this UART and add the DHCOM GPIO P pin via
88 * rts-gpios. The RS485_RX_En is controlled by DHCOM GPIO Q, see gpio1
95 rts-gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>; /* GPIO
[all...]
H A Dimx6dl-prtvt7.dts66 label = "GPIO Key ESC";
72 label = "GPIO Key UP";
78 label = "GPIO Key DOWN";
84 label = "GPIO Key Enter";
90 label = "GPIO Key CYCLE";
96 label = "GPIO Key F1";
102 label = "GPIO Key F2";
108 label = "GPIO Key F3";
114 label = "GPIO Key F4";
120 label = "GPIO Ke
[all...]
H A Dimx6qdl-solidsense.dtsi101 /* Nordic Chip 1 SWDIO - GPIO 125 */
103 /* Nordic Chip 1 SWDCLK - GPIO 59 */
106 /* Nordic Chip 2 SWDIO - GPIO 81 */
108 /* Nordic Chip 2 SWCLK - GPIO 82 */
115 /* Red LED 1 - GPIO 58 */
117 /* Green LED 1 - GPIO 55 */
119 /* Red LED 2 - GPIO 57 */
121 /* Green LED 2 - GPIO 56 */
/src/sys/external/gpl2/dts/dist/arch/arm/boot/dts/nxp/mxs/
H A Dimx28-duckbill-2-spi.dts33 MX28_PAD_LCD_D14__GPIO_1_14 /* GPIO 0 */
34 MX28_PAD_LCD_D15__GPIO_1_15 /* GPIO 1 */
35 MX28_PAD_LCD_D18__GPIO_1_18 /* GPIO 2 */
36 MX28_PAD_LCD_D21__GPIO_1_21 /* GPIO 3 */
/src/sys/external/gpl2/dts/dist/arch/arm/boot/dts/intel/socfpga/
H A Dsocfpga_cyclone5_mcvevk.dts35 &gpio0 { /* GPIO 0 ... 28 */
39 &gpio1 { /* GPIO 29 ... 57 */
43 &gpio2 { /* GPIO 58..66 (HLGPI 0..13 at offset 13) */
58 irq-gpio = <&portb 28 0x4>; /* GPIO 57, trig. level HI */
/src/sys/external/gpl2/dts/dist/arch/arm64/boot/dts/qcom/
H A Dqrb5165-rb5.dts1154 "GPIO-MM",
1155 "GPIO-NN",
1156 "GPIO-OO",
1157 "GPIO-PP",
1158 "GPIO-A",
1159 "GPIO-C",
1160 "GPIO-E",
1161 "GPIO-D",
1164 "GPIO-TT", /* GPIO_10 */
1168 "GPIO
[all...]
H A Dmsm8916-samsung-j3-common.dtsi44 /* GPIO pins vary depending on model variant */
48 /* GPIO pins vary depending on model variant */
H A Dapq8016-sbc.dts446 * GPIO name legend: proper name = the GPIO line is used as GPIO
449 * "[PER]" = pin is muxed for [peripheral] (not GPIO)
465 * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
466 * ones actually used for GPIO.
483 "GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
484 "GPIO
[all...]
/src/sys/external/gpl2/dts/dist/arch/arm64/boot/dts/freescale/
H A Dimx8mp-dhcom-pdk2.dts36 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */
37 label = "TA1-GPIO-A";
45 gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */
46 label = "TA2-GPIO-B";
54 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
55 label = "TA3-GPIO-C";
63 gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; /* GPIO D */
64 label = "TA4-GPIO-D";
91 gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* GPIO E */
100 gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO
[all...]
/src/sys/external/gpl2/dts/dist/arch/arm64/boot/dts/actions/
H A Ds900-bubblegum-96.dts68 * GPIO name legend: proper name = the GPIO line is used as GPIO
71 * "[PER]" = pin is muxed for [peripheral] (not GPIO)
88 * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L"
89 * are the only ones actually used for GPIO.
94 "GPIO-A", /* GPIO_0, LSEC pin 23 */
95 "GPIO
[all...]
/src/sys/external/gpl2/dts/dist/arch/arm64/boot/dts/rockchip/
H A Drk3588-friendlyelec-cm3588-nas.dts228 /* GPIO names are in the format "Human-readable-name [SIGNAL_LABEL]" */
371 /* GPIO Connector, connected to 40-pin GPIO header */
512 /* GPIO Connector, connected to 40-pin GPIO header */
520 /* GPIO Connector, connected to 40-pin GPIO header */
534 /* GPIO Connector, connected to 40-pin GPIO header */
541 /* GPIO Connecto
[all...]
/src/sys/external/bsd/drm2/dist/drm/amd/display/dc/gpio/
H A DMakefile24 # It provides the control and status of HW GPIO pins.
26 GPIO = gpio_base.o gpio_service.o hw_factory.o \ macro
29 AMD_DAL_GPIO = $(addprefix $(AMDDALPATH)/dc/gpio/,$(GPIO))
/src/sys/external/gpl2/dts/dist/arch/arm64/boot/dts/apple/
H A Dt600x-gpio-pins.dtsi3 * GPIO pin mappings for Apple T600x SoCs.
/src/sys/external/gpl2/dts/dist/arch/arm/boot/dts/ti/omap/
H A Domap3-overo-tobiduo-common.dtsi18 interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */
53 interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* GPIO 65 */
H A Domap3-panel-sharp-ls037v7dw01.dtsi6 * at minimum the GPIO enable-gpios for display, and
20 /* 3.3V GPIO controlled regulator for LCD_ENVDD */
/src/sys/external/gpl2/dts/dist/arch/arm/boot/dts/st/
H A Dstm32mp15xx-dhcom-pdk2.dtsi32 * so mark this as polled GPIO key.
35 label = "TA1-GPIO-A";
42 * so mark this as polled GPIO key.
45 label = "TA2-GPIO-B";
52 * so mark this as polled GPIO key.
55 label = "TA3-GPIO-C";
65 label = "TA4-GPIO-D";
199 interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */

Completed in 27 milliseconds

1234567891011>>