xref: /src/sys/arch/mips/sibyte/include/bcm1480_scd.h

/*  *********************************************************************
    *  BCM1280/BCM1400 Board Support Package
    *
    *  SCD Constants and Macros                     File: bcm1480_scd.h
    *
    *  This module contains constants and macros useful for
    *  manipulating the System Control and Debug module.
    *
    *  BCM1400 specification level: 1X55_1X80-UM100-R (12/18/03)
    *
    *********************************************************************
    *
    *  Copyright 2000,2001,2002,2003,2004,2005
    *  Broadcom Corporation. All rights reserved.
    *
    *  This software is furnished under license and may be used and
    *  copied only in accordance with the following terms and
    *  conditions.  Subject to these conditions, you may download,
    *  copy, install, use, modify and distribute modified or unmodified
    *  copies of this software in source and/or binary form.  No title
    *  or ownership is transferred hereby.
    *
    *  1) Any source code used, modified or distributed must reproduce
    *     and retain this copyright notice and list of conditions
    *     as they appear in the source file.
    *
    *  2) No right is granted to use any trade name, trademark, or
    *     logo of Broadcom Corporation.  The "Broadcom Corporation"
    *     name may not be used to endorse or promote products derived
    *     from this software without the prior written permission of
    *     Broadcom Corporation.
    *
    *  3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR
    *     IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED
    *     WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
    *     PURPOSE, OR NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT
    *     SHALL BROADCOM BE LIABLE FOR ANY DAMAGES WHATSOEVER, AND IN
    *     PARTICULAR, BROADCOM SHALL NOT BE LIABLE FOR DIRECT, INDIRECT,
    *     INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
    *     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
    *     GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
    *     BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
    *     OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
    *     TORT (INCLUDING NEGLIGENCE OR OTHERWISE), EVEN IF ADVISED OF
    *     THE POSSIBILITY OF SUCH DAMAGE.
    ********************************************************************* */

#ifndef _BCM1480_SCD_H
#define _BCM1480_SCD_H

#include "sb1250_defs.h"

/*  *********************************************************************
    *  Pull in the BCM1250's SCD since lots of stuff is the same.
    ********************************************************************* */

#include "sb1250_scd.h"

/*  *********************************************************************
    *  Some general notes:
    *
    *  This file is basically a "what's new" header file.  Since the
    *  BCM1250 and the new BCM1480 (and derivatives) share many common
    *  features, this file contains only what's new or changed from
    *  the 1250.  (above, you can see that we include the 1250 symbols
    *  to get the base functionality).
    *
    *  In software, be sure to use the correct symbols, particularly
    *  for blocks that are different between the two chip families.
    *  All BCM1480-specific symbols have _BCM1480_ in their names,
    *  and all BCM1250-specific and "base" functions that are common in
    *  both chips have no special names (this is for compatibility with
    *  older include files).  Therefore, if you're working with the
    *  SCD, which is very different on each chip, A_SCD_xxx implies
    *  the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480
    *  version.
    ********************************************************************* */

/*  *********************************************************************
    *  System control/debug registers
    ********************************************************************* */

/*
 * System Identification and Revision Register (Table 12)
 * Register: SCD_SYSTEM_REVISION
 * This register is field compatible with the 1250.
 */

/*
 * New part definitions
 */

#define K_SYS_PART_BCM1480          0x1406
#define K_SYS_PART_BCM1280          0x1206
#define K_SYS_PART_BCM1455          0x1407
#define K_SYS_PART_BCM1255          0x1257
#define K_SYS_PART_BCM1158          0x1156

/*
 * Manufacturing Information Register (Table 14)
 * Register: SCD_SYSTEM_MANUF
 */

/*
 * System Configuration Register (Table 15)
 * Register: SCD_SYSTEM_CFG
 * Entire register is different from 1250, all new constants below
 */

#define M_BCM1480_SYS_RESERVED0             _SB_MAKEMASK1(0)
#define M_BCM1480_SYS_HT_MINRSTCNT          _SB_MAKEMASK1(1)
#define M_BCM1480_SYS_RESERVED2             _SB_MAKEMASK1(2)
#define M_BCM1480_SYS_RESERVED3             _SB_MAKEMASK1(3)
#define M_BCM1480_SYS_RESERVED4             _SB_MAKEMASK1(4)
#define M_BCM1480_SYS_IOB_DIV               _SB_MAKEMASK1(5)

#define S_BCM1480_SYS_PLL_DIV               _SB_MAKE64(6)
#define M_BCM1480_SYS_PLL_DIV               _SB_MAKEMASK(5,S_BCM1480_SYS_PLL_DIV)
#define V_BCM1480_SYS_PLL_DIV(x)            _SB_MAKEVALUE(x,S_BCM1480_SYS_PLL_DIV)
#define G_BCM1480_SYS_PLL_DIV(x)            _SB_GETVALUE(x,S_BCM1480_SYS_PLL_DIV,M_BCM1480_SYS_PLL_DIV)

#define S_BCM1480_SYS_SW_DIV                _SB_MAKE64(11)
#define M_BCM1480_SYS_SW_DIV                _SB_MAKEMASK(5,S_BCM1480_SYS_SW_DIV)
#define V_BCM1480_SYS_SW_DIV(x)             _SB_MAKEVALUE(x,S_BCM1480_SYS_SW_DIV)
#define G_BCM1480_SYS_SW_DIV(x)             _SB_GETVALUE(x,S_BCM1480_SYS_SW_DIV,M_BCM1480_SYS_SW_DIV)

#define M_BCM1480_SYS_PCMCIA_ENABLE         _SB_MAKEMASK1(16)
#define M_BCM1480_SYS_DUART1_ENABLE         _SB_MAKEMASK1(17)

#define S_BCM1480_SYS_BOOT_MODE             _SB_MAKE64(18)
#define M_BCM1480_SYS_BOOT_MODE             _SB_MAKEMASK(2,S_BCM1480_SYS_BOOT_MODE)
#define V_BCM1480_SYS_BOOT_MODE(x)          _SB_MAKEVALUE(x,S_BCM1480_SYS_BOOT_MODE)
#define G_BCM1480_SYS_BOOT_MODE(x)          _SB_GETVALUE(x,S_BCM1480_SYS_BOOT_MODE,M_BCM1480_SYS_BOOT_MODE)
#define K_BCM1480_SYS_BOOT_MODE_ROM32       0
#define K_BCM1480_SYS_BOOT_MODE_ROM8        1
#define K_BCM1480_SYS_BOOT_MODE_SMBUS_SMALL 2
#define K_BCM1480_SYS_BOOT_MODE_SMBUS_BIG   3
#define M_BCM1480_SYS_BOOT_MODE_SMBUS       _SB_MAKEMASK1(19)

#define M_BCM1480_SYS_PCI_HOST              _SB_MAKEMASK1(20)
#define M_BCM1480_SYS_PCI_ARBITER           _SB_MAKEMASK1(21)
#define M_BCM1480_SYS_BIG_ENDIAN            _SB_MAKEMASK1(22)
#define M_BCM1480_SYS_GENCLK_EN             _SB_MAKEMASK1(23)
#define M_BCM1480_SYS_GEN_PARITY_EN         _SB_MAKEMASK1(24)
#define M_BCM1480_SYS_RESERVED25            _SB_MAKEMASK1(25)

#define S_BCM1480_SYS_CONFIG                26
#define M_BCM1480_SYS_CONFIG                _SB_MAKEMASK(6,S_BCM1480_SYS_CONFIG)
#define V_BCM1480_SYS_CONFIG(x)             _SB_MAKEVALUE(x,S_BCM1480_SYS_CONFIG)
#define G_BCM1480_SYS_CONFIG(x)             _SB_GETVALUE(x,S_BCM1480_SYS_CONFIG,M_BCM1480_SYS_CONFIG)

#define M_BCM1480_SYS_RESERVED32            _SB_MAKEMASK(32,15)

#define S_BCM1480_SYS_NODEID                47
#define M_BCM1480_SYS_NODEID                _SB_MAKEMASK(4,S_BCM1480_SYS_NODEID)
#define V_BCM1480_SYS_NODEID(x)             _SB_MAKEVALUE(x,S_BCM1480_SYS_NODEID)
#define G_BCM1480_SYS_NODEID(x)             _SB_GETVALUE(x,S_BCM1480_SYS_NODEID,M_BCM1480_SYS_NODEID)

#define M_BCM1480_SYS_CCNUMA_EN             _SB_MAKEMASK1(51)
#define M_BCM1480_SYS_CPU_RESET_0           _SB_MAKEMASK1(52)
#define M_BCM1480_SYS_CPU_RESET_1           _SB_MAKEMASK1(53)
#define M_BCM1480_SYS_CPU_RESET_2           _SB_MAKEMASK1(54)
#define M_BCM1480_SYS_CPU_RESET_3           _SB_MAKEMASK1(55)
#define S_BCM1480_SYS_DISABLECPU0           56
#define M_BCM1480_SYS_DISABLECPU0           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0)
#define S_BCM1480_SYS_DISABLECPU1           57
#define M_BCM1480_SYS_DISABLECPU1           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1)
#define S_BCM1480_SYS_DISABLECPU2           58
#define M_BCM1480_SYS_DISABLECPU2           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2)
#define S_BCM1480_SYS_DISABLECPU3           59
#define M_BCM1480_SYS_DISABLECPU3           _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3)

#define M_BCM1480_SYS_SB_SOFTRES            _SB_MAKEMASK1(60)
#define M_BCM1480_SYS_EXT_RESET             _SB_MAKEMASK1(61)
#define M_BCM1480_SYS_SYSTEM_RESET          _SB_MAKEMASK1(62)
#define M_BCM1480_SYS_SW_FLAG               _SB_MAKEMASK1(63)

/*
 * Scratch Register (Table 16)
 * Register: SCD_SYSTEM_SCRATCH
 * Same as BCM1250
 */


/*
 * Mailbox Registers (Table 17)
 * Registers: SCD_MBOX_{0,1}_CPU_x
 * Same as BCM1250
 */


/*
 * See bcm1480_int.h for interrupt mapper registers.
 */


/*
 * Watchdog Timer Initial Count Registers (Table 23)
 * Registers: SCD_WDOG_INIT_CNT_x
 *
 * The watchdogs are almost the same as the 1250, except
 * the configuration register has more bits to control the
 * other CPUs.
 */


/*
 * Watchdog Timer Configuration Registers (Table 25)
 * Registers: SCD_WDOG_CFG_x
 */

#define M_BCM1480_SCD_WDOG_ENABLE           _SB_MAKEMASK1(0)

#define S_BCM1480_SCD_WDOG_RESET_TYPE       2
#define M_BCM1480_SCD_WDOG_RESET_TYPE       _SB_MAKEMASK(5,S_BCM1480_SCD_WDOG_RESET_TYPE)
#define V_BCM1480_SCD_WDOG_RESET_TYPE(x)    _SB_MAKEVALUE(x,S_BCM1480_SCD_WDOG_RESET_TYPE)
#define G_BCM1480_SCD_WDOG_RESET_TYPE(x)    _SB_GETVALUE(x,S_BCM1480_SCD_WDOG_RESET_TYPE,M_BCM1480_SCD_WDOG_RESET_TYPE)

#define K_BCM1480_SCD_WDOG_RESET_FULL       0	/* actually, (x & 1) == 0  */
#define K_BCM1480_SCD_WDOG_RESET_SOFT       1
#define K_BCM1480_SCD_WDOG_RESET_CPU0       3
#define K_BCM1480_SCD_WDOG_RESET_CPU1       5
#define K_BCM1480_SCD_WDOG_RESET_CPU2       9
#define K_BCM1480_SCD_WDOG_RESET_CPU3       17
#define K_BCM1480_SCD_WDOG_RESET_ALL_CPUS   31


#define M_BCM1480_SCD_WDOG_HAS_RESET        _SB_MAKEMASK1(8)

/*
 * General Timer Initial Count Registers (Table 26)
 * Registers: SCD_TIMER_INIT_x
 *
 * The timer registers are the same as the BCM1250
 */


/*
 * ZBbus Count Register (Table 29)
 * Register: ZBBUS_CYCLE_COUNT
 *
 * Same as BCM1250
 */

/*
 * ZBbus Compare Registers (Table 30)
 * Registers: ZBBUS_CYCLE_CPx
 *
 * Same as BCM1250
 */


/*
 * System Performance Counter Configuration Register (Table 31)
 * Register: PERF_CNT_CFG_0
 *
 * SPC_CFG_SRC[0-3] is the same as the 1250.
 * SPC_CFG_SRC[4-7] only exist on the 1480
 * The clear/enable bits are in different locations on the 1250 and 1480.
 */

#define S_SPC_CFG_SRC4              32
#define M_SPC_CFG_SRC4              _SB_MAKEMASK(8,S_SPC_CFG_SRC4)
#define V_SPC_CFG_SRC4(x)           _SB_MAKEVALUE(x,S_SPC_CFG_SRC4)
#define G_SPC_CFG_SRC4(x)           _SB_GETVALUE(x,S_SPC_CFG_SRC4,M_SPC_CFG_SRC4)

#define S_SPC_CFG_SRC5              40
#define M_SPC_CFG_SRC5              _SB_MAKEMASK(8,S_SPC_CFG_SRC5)
#define V_SPC_CFG_SRC5(x)           _SB_MAKEVALUE(x,S_SPC_CFG_SRC5)
#define G_SPC_CFG_SRC5(x)           _SB_GETVALUE(x,S_SPC_CFG_SRC5,M_SPC_CFG_SRC5)

#define S_SPC_CFG_SRC6              48
#define M_SPC_CFG_SRC6              _SB_MAKEMASK(8,S_SPC_CFG_SRC6)
#define V_SPC_CFG_SRC6(x)           _SB_MAKEVALUE(x,S_SPC_CFG_SRC6)
#define G_SPC_CFG_SRC6(x)           _SB_GETVALUE(x,S_SPC_CFG_SRC6,M_SPC_CFG_SRC6)

#define S_SPC_CFG_SRC7              56
#define M_SPC_CFG_SRC7              _SB_MAKEMASK(8,S_SPC_CFG_SRC7)
#define V_SPC_CFG_SRC7(x)           _SB_MAKEVALUE(x,S_SPC_CFG_SRC7)
#define G_SPC_CFG_SRC7(x)           _SB_GETVALUE(x,S_SPC_CFG_SRC7,M_SPC_CFG_SRC7)

/*
 * System Performance Counter Control Register (Table 32)
 * Register: PERF_CNT_CFG_1
 * BCM1480 specific
 */
#define M_BCM1480_SPC_CFG_CLEAR     _SB_MAKEMASK1(0)
#define M_BCM1480_SPC_CFG_ENABLE    _SB_MAKEMASK1(1)
#if SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_SPC_CFG_CLEAR			M_BCM1480_SPC_CFG_CLEAR
#define M_SPC_CFG_ENABLE		M_BCM1480_SPC_CFG_ENABLE
#endif

/*
 * System Performance Counters (Table 33)
 * Registers: PERF_CNT_x
 */

#define S_BCM1480_SPC_CNT_COUNT             0
#define M_BCM1480_SPC_CNT_COUNT             _SB_MAKEMASK(40,S_BCM1480_SPC_CNT_COUNT)
#define V_BCM1480_SPC_CNT_COUNT(x)          _SB_MAKEVALUE(x,S_BCM1480_SPC_CNT_COUNT)
#define G_BCM1480_SPC_CNT_COUNT(x)          _SB_GETVALUE(x,S_BCM1480_SPC_CNT_COUNT,M_BCM1480_SPC_CNT_COUNT)

#define M_BCM1480_SPC_CNT_OFLOW             _SB_MAKEMASK1(40)


/*
 * Bus Watcher Error Status Register (Tables 36, 37)
 * Registers: BUS_ERR_STATUS, BUS_ERR_STATUS_DEBUG
 * Same as BCM1250.
 */

/*
 * Bus Watcher Error Data Registers (Table 38)
 * Registers: BUS_ERR_DATA_x
 * Same as BCM1250.
 */

/*
 * Bus Watcher L2 ECC Counter Register (Table 39)
 * Register: BUS_L2_ERRORS
 * Same as BCM1250.
 */


/*
 * Bus Watcher Memory and I/O Error Counter Register (Table 40)
 * Register: BUS_MEM_IO_ERRORS
 * Same as BCM1250.
 */


/*
 * Address Trap Registers
 *
 * Register layout same as BCM1250, almost.  The bus agents
 * are different, and the address trap configuration bits are
 * slightly different.
 */

#define M_BCM1480_ATRAP_INDEX		  _SB_MAKEMASK(4,0)
#define M_BCM1480_ATRAP_ADDRESS		  _SB_MAKEMASK(40,0)

#define S_BCM1480_ATRAP_CFG_CNT            0
#define M_BCM1480_ATRAP_CFG_CNT            _SB_MAKEMASK(3,S_BCM1480_ATRAP_CFG_CNT)
#define V_BCM1480_ATRAP_CFG_CNT(x)         _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_CNT)
#define G_BCM1480_ATRAP_CFG_CNT(x)         _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_CNT,M_BCM1480_ATRAP_CFG_CNT)

#define M_BCM1480_ATRAP_CFG_WRITE	   _SB_MAKEMASK1(3)
#define M_BCM1480_ATRAP_CFG_ALL	  	   _SB_MAKEMASK1(4)
#define M_BCM1480_ATRAP_CFG_INV	   	   _SB_MAKEMASK1(5)
#define M_BCM1480_ATRAP_CFG_USESRC	   _SB_MAKEMASK1(6)
#define M_BCM1480_ATRAP_CFG_SRCINV	   _SB_MAKEMASK1(7)

#define S_BCM1480_ATRAP_CFG_AGENTID     8
#define M_BCM1480_ATRAP_CFG_AGENTID     _SB_MAKEMASK(4,S_BCM1480_ATRAP_CFG_AGENTID)
#define V_BCM1480_ATRAP_CFG_AGENTID(x)  _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_AGENTID)
#define G_BCM1480_ATRAP_CFG_AGENTID(x)  _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_AGENTID,M_BCM1480_ATRAP_CFG_AGENTID)


#define K_BCM1480_BUS_AGENT_CPU0            0
#define K_BCM1480_BUS_AGENT_CPU1            1
#define K_BCM1480_BUS_AGENT_NC              2
#define K_BCM1480_BUS_AGENT_IOB             3
#define K_BCM1480_BUS_AGENT_SCD             4
#define K_BCM1480_BUS_AGENT_L2C             6
#define K_BCM1480_BUS_AGENT_MC              7
#define K_BCM1480_BUS_AGENT_CPU2            8
#define K_BCM1480_BUS_AGENT_CPU3            9
#define K_BCM1480_BUS_AGENT_PM              10

#define S_BCM1480_ATRAP_CFG_CATTR           12
#define M_BCM1480_ATRAP_CFG_CATTR           _SB_MAKEMASK(2,S_BCM1480_ATRAP_CFG_CATTR)
#define V_BCM1480_ATRAP_CFG_CATTR(x)        _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_CATTR)
#define G_BCM1480_ATRAP_CFG_CATTR(x)        _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_CATTR,M_BCM1480_ATRAP_CFG_CATTR)

#define K_BCM1480_ATRAP_CFG_CATTR_IGNORE    0
#define K_BCM1480_ATRAP_CFG_CATTR_UNC       1
#define K_BCM1480_ATRAP_CFG_CATTR_NONCOH    2
#define K_BCM1480_ATRAP_CFG_CATTR_COHERENT  3

#define M_BCM1480_ATRAP_CFG_CATTRINV        _SB_MAKEMASK1(14)


/*
 * Trace Event Registers (Table 47)
 * Same as BCM1250.
 */

/*
 * Trace Sequence Control Registers (Table 48)
 * Registers: TRACE_SEQUENCE_x
 *
 * Same as BCM1250 except for two new fields.
 */


#define M_BCM1480_SCD_TRSEQ_TID_MATCH_EN    _SB_MAKEMASK1(25)

#define S_BCM1480_SCD_TRSEQ_SWFUNC          26
#define M_BCM1480_SCD_TRSEQ_SWFUNC          _SB_MAKEMASK(2,S_BCM1480_SCD_TRSEQ_SWFUNC)
#define V_BCM1480_SCD_TRSEQ_SWFUNC(x)       _SB_MAKEVALUE(x,S_BCM1480_SCD_TRSEQ_SWFUNC)
#define G_BCM1480_SCD_TRSEQ_SWFUNC(x)       _SB_GETVALUE(x,S_BCM1480_SCD_TRSEQ_SWFUNC,M_BCM1480_SCD_TRSEQ_SWFUNC)

/*
 * Trace Control Register (Table 49)
 * Register: TRACE_CFG
 *
 * BCM1480 changes to this register (other than location of the CUR_ADDR field)
 * are defined below.
 */

#define S_BCM1480_SCD_TRACE_CFG_MODE        16
#define M_BCM1480_SCD_TRACE_CFG_MODE        _SB_MAKEMASK(2,S_BCM1480_SCD_TRACE_CFG_MODE)
#define V_BCM1480_SCD_TRACE_CFG_MODE(x)     _SB_MAKEVALUE(x,S_BCM1480_SCD_TRACE_CFG_MODE)
#define G_BCM1480_SCD_TRACE_CFG_MODE(x)     _SB_GETVALUE(x,S_BCM1480_SCD_TRACE_CFG_MODE,M_BCM1480_SCD_TRACE_CFG_MODE)

#define K_BCM1480_SCD_TRACE_CFG_MODE_BLOCKERS	0
#define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT	1
#define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID	2

#endif /* _BCM1480_SCD_H */