Searched +hist:1.88 +hist:2.2 (Results 1 - 25 of 33) sorted by relevance

12

/src/sys/compat/linux/arch/mips/
H A Dlinux_syscall.h1.88 Sat Jul 29 15:05:46 GMT 2023 christos regen
1.4 Sun Oct 14 17:21:48 GMT 2001 manu Fixed some mistakes in signal handling (this is still broken)
Added some code to set linux's uname kernel version to 2.4.0 (usefull for
testing with glibc-2.2). This is currently guarded by a #if 0.
1.88 Sat Jul 29 15:05:46 GMT 2023 christos regen
1.4 Sun Oct 14 17:21:48 GMT 2001 manu Fixed some mistakes in signal handling (this is still broken)
Added some code to set linux's uname kernel version to 2.4.0 (usefull for
testing with glibc-2.2). This is currently guarded by a #if 0.
H A Dlinux_sysent.c1.88 Fri Aug 18 19:42:06 GMT 2023 christos regen
1.4 Sun Oct 14 17:21:48 GMT 2001 manu Fixed some mistakes in signal handling (this is still broken)
Added some code to set linux's uname kernel version to 2.4.0 (usefull for
testing with glibc-2.2). This is currently guarded by a #if 0.
H A Dlinux_syscalls.c1.88 Fri Aug 18 19:42:06 GMT 2023 christos regen
1.4 Sun Oct 14 17:21:48 GMT 2001 manu Fixed some mistakes in signal handling (this is still broken)
Added some code to set linux's uname kernel version to 2.4.0 (usefull for
testing with glibc-2.2). This is currently guarded by a #if 0.
H A Dlinux_syscallargs.h1.88 Fri Aug 18 19:42:06 GMT 2023 christos regen
1.4 Sun Oct 14 17:21:48 GMT 2001 manu Fixed some mistakes in signal handling (this is still broken)
Added some code to set linux's uname kernel version to 2.4.0 (usefull for
testing with glibc-2.2). This is currently guarded by a #if 0.
/src/sys/dev/ic/
H A Dac97.c1.88 Tue Jun 24 10:57:45 GMT 2008 gmcgarry branches: 1.88.4; 1.88.8;
Array range designated initializers are a gcc extension. Replace with
explicit initialization with zeros, although it probably isn't necessary.
1.88 Tue Jun 24 10:57:45 GMT 2008 gmcgarry branches: 1.88.4; 1.88.8;
Array range designated initializers are a gcc extension. Replace with
explicit initialization with zeros, although it probably isn't necessary.
1.88 Tue Jun 24 10:57:45 GMT 2008 gmcgarry branches: 1.88.4; 1.88.8;
Array range designated initializers are a gcc extension. Replace with
explicit initialization with zeros, although it probably isn't necessary.
1.68 Mon Apr 04 18:52:30 GMT 2005 jmcneill * Add more AC97 modem registers (from AC'97 revision 2.2)
* Add sysctls to control the modem's off-hook status (work in progress)
/src/distrib/notes/common/
H A Dpostinstall1.88 Wed Oct 21 07:46:22 GMT 2020 nia branches: 1.88.2;
Improve instructions for getting you a pkgsrc.
Use awge on evbarm.
1.88 Wed Oct 21 07:46:22 GMT 2020 nia branches: 1.88.2;
Improve instructions for getting you a pkgsrc.
Use awge on evbarm.
1.63 Wed Jul 25 22:01:13 GMT 2007 pavel branches: 1.63.4; 1.63.8;
merge rev. 1.58.2.2 - fix ".end-preformat" problem.
/src/sys/dev/scsipi/
H A Datapiconf.c1.88 Sun Mar 13 09:01:04 GMT 2016 tsutsui branches: 1.88.2;
Sync with scsiconf.c. (use aprint_normal(9) for "not configured")
1.88 Sun Mar 13 09:01:04 GMT 2016 tsutsui branches: 1.88.2;
Sync with scsiconf.c. (use aprint_normal(9) for "not configured")
1.21 Tue Jan 19 10:57:11 GMT 1999 bouyer Move test for SDEV_NOSTARTUNIT quirk from sd.c to scsipi_start().
Add a SDEV_NOSTARTUNIT quirk entry for BCD-16X 1997-04-25", "", "VER 2.2"
CD-rom (from Michael Santos).
H A Dscsipiconf.h1.88 Fri Sep 17 23:10:50 GMT 2004 mycroft Do not manipulate xs->bp in "generic" code -- do it only in the psw_done
routine. As part of this, pass down our pre-parsed error code -- though this
interface will probably change later to accomodate better error handling.
1.29 Tue Jan 19 10:57:11 GMT 1999 bouyer branches: 1.29.2;
Move test for SDEV_NOSTARTUNIT quirk from sd.c to scsipi_start().
Add a SDEV_NOSTARTUNIT quirk entry for BCD-16X 1997-04-25", "", "VER 2.2"
CD-rom (from Michael Santos).
1.88 Fri Sep 17 23:10:50 GMT 2004 mycroft Do not manipulate xs->bp in "generic" code -- do it only in the psw_done
routine. As part of this, pass down our pre-parsed error code -- though this
interface will probably change later to accomodate better error handling.
1.29 Tue Jan 19 10:57:11 GMT 1999 bouyer branches: 1.29.2;
Move test for SDEV_NOSTARTUNIT quirk from sd.c to scsipi_start().
Add a SDEV_NOSTARTUNIT quirk entry for BCD-16X 1997-04-25", "", "VER 2.2"
CD-rom (from Michael Santos).
H A Dscsipi_base.c1.88 Sat Apr 19 19:12:59 GMT 2003 fvdl branches: 1.88.2;
A device should always respond to inquiry or test unit ready; disable
retries for these during discovery. From Pascal Renauld at Network
Storage Solutions, Inc
1.88 Sat Apr 19 19:12:59 GMT 2003 fvdl branches: 1.88.2;
A device should always respond to inquiry or test unit ready; disable
retries for these during discovery. From Pascal Renauld at Network
Storage Solutions, Inc
1.18 Tue Jan 19 10:57:11 GMT 1999 bouyer Move test for SDEV_NOSTARTUNIT quirk from sd.c to scsipi_start().
Add a SDEV_NOSTARTUNIT quirk entry for BCD-16X 1997-04-25", "", "VER 2.2"
CD-rom (from Michael Santos).
H A Dsd.c1.139 Tue Jan 19 10:57:11 GMT 1999 bouyer Move test for SDEV_NOSTARTUNIT quirk from sd.c to scsipi_start().
Add a SDEV_NOSTARTUNIT quirk entry for BCD-16X 1997-04-25", "", "VER 2.2"
CD-rom (from Michael Santos).
1.88 Tue Mar 05 00:15:15 GMT 1996 thorpej Normalize SCSI autoconfiguration output.
From Chris Demetriou <cgd@NetBSD.ORG>. Fixes PR #1958.
/src/sys/dev/pci/
H A Dpcireg.h1.88 Fri May 23 17:54:08 GMT 2014 msaitoh PME# clock is not bit 2 but bit 3. Use the macro!
1.20 Mon Sep 27 03:20:47 GMT 1999 cgd branches: 1.20.2; 1.20.8;
add classes/subclasses new in PCI 2.2. Needs a bit of cleanup, but then,
so does everything involving configuration space headers and if i don't
get this out of my source tree i'll go insane.
1.18 Sat Nov 07 16:47:22 GMT 1998 drochner add support for "extended capabilities" (new in PCI spec 2.2)
H A Dpci_subr.c1.88 Wed Aug 17 00:59:47 GMT 2011 dyoung branches: 1.88.2; 1.88.6;
Redefine PCI_MSI_* and PCI_PCIE_* constants in terms of bits(3).

Use named constants and more conventional variable names in
pci_msi_establish() and pci_msi_disestablish(). Fix a couple of bugs:
pci_msi_establish() returned a pointer to the struct intrhand instead of
to the struct msi_hdl as it was intended to, and pci_msi_disestablish()
did not free(9) the msi_hdl.
1.88 Wed Aug 17 00:59:47 GMT 2011 dyoung branches: 1.88.2; 1.88.6;
Redefine PCI_MSI_* and PCI_PCIE_* constants in terms of bits(3).

Use named constants and more conventional variable names in
pci_msi_establish() and pci_msi_disestablish(). Fix a couple of bugs:
pci_msi_establish() returned a pointer to the struct intrhand instead of
to the struct msi_hdl as it was intended to, and pci_msi_disestablish()
did not free(9) the msi_hdl.
1.88 Wed Aug 17 00:59:47 GMT 2011 dyoung branches: 1.88.2; 1.88.6;
Redefine PCI_MSI_* and PCI_PCIE_* constants in terms of bits(3).

Use named constants and more conventional variable names in
pci_msi_establish() and pci_msi_disestablish(). Fix a couple of bugs:
pci_msi_establish() returned a pointer to the struct intrhand instead of
to the struct msi_hdl as it was intended to, and pci_msi_disestablish()
did not free(9) the msi_hdl.
1.32 Mon Sep 27 03:20:47 GMT 1999 cgd branches: 1.32.2; 1.32.8;
add classes/subclasses new in PCI 2.2. Needs a bit of cleanup, but then,
so does everything involving configuration space headers and if i don't
get this out of my source tree i'll go insane.
1.88 Wed Aug 17 00:59:47 GMT 2011 dyoung branches: 1.88.2; 1.88.6;
Redefine PCI_MSI_* and PCI_PCIE_* constants in terms of bits(3).

Use named constants and more conventional variable names in
pci_msi_establish() and pci_msi_disestablish(). Fix a couple of bugs:
pci_msi_establish() returned a pointer to the struct intrhand instead of
to the struct msi_hdl as it was intended to, and pci_msi_disestablish()
did not free(9) the msi_hdl.
1.88 Wed Aug 17 00:59:47 GMT 2011 dyoung branches: 1.88.2; 1.88.6;
Redefine PCI_MSI_* and PCI_PCIE_* constants in terms of bits(3).

Use named constants and more conventional variable names in
pci_msi_establish() and pci_msi_disestablish(). Fix a couple of bugs:
pci_msi_establish() returned a pointer to the struct intrhand instead of
to the struct msi_hdl as it was intended to, and pci_msi_disestablish()
did not free(9) the msi_hdl.
1.88 Wed Aug 17 00:59:47 GMT 2011 dyoung branches: 1.88.2; 1.88.6;
Redefine PCI_MSI_* and PCI_PCIE_* constants in terms of bits(3).

Use named constants and more conventional variable names in
pci_msi_establish() and pci_msi_disestablish(). Fix a couple of bugs:
pci_msi_establish() returned a pointer to the struct intrhand instead of
to the struct msi_hdl as it was intended to, and pci_msi_disestablish()
did not free(9) the msi_hdl.
1.32 Mon Sep 27 03:20:47 GMT 1999 cgd branches: 1.32.2; 1.32.8;
add classes/subclasses new in PCI 2.2. Needs a bit of cleanup, but then,
so does everything involving configuration space headers and if i don't
get this out of my source tree i'll go insane.
H A Dpcivar.h1.88 Tue May 25 08:35:45 GMT 2010 pgoyette Rework the pciverbose module dispatch vectors to avoid renaming the
externally-visible entrypoint name. Also this avoids a potential
need to bump kernel version.

Requested by dyoung@ and mrg@
1.37 Sat Nov 07 16:47:22 GMT 1998 drochner add support for "extended capabilities" (new in PCI spec 2.2)
H A Dpci.c1.88 Mon Aug 30 15:05:20 GMT 2004 drochner Phase out the use of a string as first "attach args" member to control
which bustype should be attached with a specific call to config_found()
(from a "mainbus" or a bus bridge).
Do it for isa/eisa/mca and pci/agp for now. These buses all attach to
an mi interface attribute "isabus", "eisabus" etc., and the autoconf
framework now allows to specify an interface attribute on config_found()
and config_search(), which limits the search of matching config data
to these which attach to that specific attribute.
So we basically have to call config_found_ia(..., "foobus", ...) where
such a bus is attached.
As a consequence, where a "mainbus" or alike also attaches other
devices (eg CPUs) which do not attach to a specific attribute yet,
we need at least pass an attribute name (different from "foobus") so
that the foo bus is not found at these places. This made some minor
changes necessary which are not obviously related to the mentioned buses.
1.40 Sat Nov 07 16:47:22 GMT 1998 drochner branches: 1.40.6; 1.40.8;
add support for "extended capabilities" (new in PCI spec 2.2)
/src/sys/arch/macppc/conf/
H A DINSTALL1.88 Tue May 31 22:09:08 GMT 2005 tron Remove unnecessary per-driver scsibus attachments and use
"scsibus* at scsi?" instead.
1.52 Thu Jan 03 04:34:21 GMT 2002 mbw tv@netbsd says that the desired behavior for macppc is for de to be default
for DEC-based chips, and to have tlp available for tulip clones. The change
in GENERIC is such that TLP_MATCH options are commented out (allowing de to
attach to DEC-based chips), and change in is INSTALL such that de is present
and TLP_MATCH options are commented out.

The addition of de in INSTALL increases its compressed size by about 17 KB.

Primarily the goal is to have INSTALL and GENERIC use the same device.
This will fix PR port-macppc/10779.

It has been tested with the 1.5.3_ALPHA GENERIC and INSTALL kernels on my
PowerMacintosh 7300 with a 21140A (now de, previously tlp) and a
Lite-On 82C115 (tlp).

de0 at pci0 dev 15 function 0
de0: interrupting at irq 25
de0: Asante 21140A [10-100Mb/s] pass 2.2
de0: address 00:00:94:a4:03:35
de0: enabling 10baseT port

tlp0 at pci0 dev 14 function 0: Lite-On 82C115 Ethernet, pass 2.5
tlp0: interrupting at irq 24
tlp0: Ethernet address 00:00:94:b6:16:ef
tlp0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX
1.88 Tue May 31 22:09:08 GMT 2005 tron Remove unnecessary per-driver scsibus attachments and use
"scsibus* at scsi?" instead.
1.52 Thu Jan 03 04:34:21 GMT 2002 mbw tv@netbsd says that the desired behavior for macppc is for de to be default
for DEC-based chips, and to have tlp available for tulip clones. The change
in GENERIC is such that TLP_MATCH options are commented out (allowing de to
attach to DEC-based chips), and change in is INSTALL such that de is present
and TLP_MATCH options are commented out.

The addition of de in INSTALL increases its compressed size by about 17 KB.

Primarily the goal is to have INSTALL and GENERIC use the same device.
This will fix PR port-macppc/10779.

It has been tested with the 1.5.3_ALPHA GENERIC and INSTALL kernels on my
PowerMacintosh 7300 with a 21140A (now de, previously tlp) and a
Lite-On 82C115 (tlp).

de0 at pci0 dev 15 function 0
de0: interrupting at irq 25
de0: Asante 21140A [10-100Mb/s] pass 2.2
de0: address 00:00:94:a4:03:35
de0: enabling 10baseT port

tlp0 at pci0 dev 14 function 0: Lite-On 82C115 Ethernet, pass 2.5
tlp0: interrupting at irq 24
tlp0: Ethernet address 00:00:94:b6:16:ef
tlp0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX
/src/sys/dev/sdmmc/
H A Dsdhc.c1.88 Tue Oct 06 14:32:51 GMT 2015 mlelstv support hiding command timeout messages with a new command flag and use this
when probing for cards. Should fix PR 50302.
1.5 Tue Jan 12 08:41:16 GMT 2010 uebayasi branches: 1.5.2;
According to SD Host Controller Simplified Specification Version 2.00, 2.2.10.
Host Control Register (Offset 028h), the "Data Transfer Width" bit is in Host
Control Register (Offset 028h), not Power Control Register (Offset 029h).
1.88 Tue Oct 06 14:32:51 GMT 2015 mlelstv support hiding command timeout messages with a new command flag and use this
when probing for cards. Should fix PR 50302.
1.5 Tue Jan 12 08:41:16 GMT 2010 uebayasi branches: 1.5.2;
According to SD Host Controller Simplified Specification Version 2.00, 2.2.10.
Host Control Register (Offset 028h), the "Data Transfer Width" bit is in Host
Control Register (Offset 028h), not Power Control Register (Offset 029h).
1.88 Tue Oct 06 14:32:51 GMT 2015 mlelstv support hiding command timeout messages with a new command flag and use this
when probing for cards. Should fix PR 50302.
1.5 Tue Jan 12 08:41:16 GMT 2010 uebayasi branches: 1.5.2;
According to SD Host Controller Simplified Specification Version 2.00, 2.2.10.
Host Control Register (Offset 028h), the "Data Transfer Width" bit is in Host
Control Register (Offset 028h), not Power Control Register (Offset 029h).
/src/distrib/sets/lists/comp/
H A Dmd.sparc641.88 Wed Feb 16 03:42:18 GMT 2011 christos bump for bind-9.8.0rc1
1.42 Fri Apr 17 20:38:04 GMT 2009 dyoung Apply the same keywords to the 32-bit compat files as apply to the
non-compat equivalent files, to stop amd64/sparc64 builds with MKxxx=no
options from failing because files in the DESTDIR are missing from the
METALOG.

amd64 builds, now, with several MKxxx=no options set. sparc64 probably
needs some more work.

FWIW, join(1) saved me some manual labor as I copied keywords from
non-compat to compat files:

1 Collect the files that are missing from the DESTDIR into
compat-i386.files

2 Replicate the first column of compat-i386.files. Remove i386/ from
the first column.

3 sort -k 1,1 distrib/sets/lists/comp/{md.amd64,mi,shl.*}
distrib/sets/lists/base/{md.amd64,mi,module.amd64,module.mi,shl.elf,sh
l.mi} | join -1 1 -2 1 -o '2.2 1.3' - compat-i386.files >
compat-i386.keywords

4 Process distrib/lists/{base,comp}/md.amd64 with join -1 1 -2 1 -o '1.1
1.2 1.3,2.2' -a1 - compat-i386.keywords
1.42 Fri Apr 17 20:38:04 GMT 2009 dyoung Apply the same keywords to the 32-bit compat files as apply to the
non-compat equivalent files, to stop amd64/sparc64 builds with MKxxx=no
options from failing because files in the DESTDIR are missing from the
METALOG.

amd64 builds, now, with several MKxxx=no options set. sparc64 probably
needs some more work.

FWIW, join(1) saved me some manual labor as I copied keywords from
non-compat to compat files:

1 Collect the files that are missing from the DESTDIR into
compat-i386.files

2 Replicate the first column of compat-i386.files. Remove i386/ from
the first column.

3 sort -k 1,1 distrib/sets/lists/comp/{md.amd64,mi,shl.*}
distrib/sets/lists/base/{md.amd64,mi,module.amd64,module.mi,shl.elf,sh
l.mi} | join -1 1 -2 1 -o '2.2 1.3' - compat-i386.files >
compat-i386.keywords

4 Process distrib/lists/{base,comp}/md.amd64 with join -1 1 -2 1 -o '1.1
1.2 1.3,2.2' -a1 - compat-i386.keywords
1.88 Wed Feb 16 03:42:18 GMT 2011 christos bump for bind-9.8.0rc1
1.42 Fri Apr 17 20:38:04 GMT 2009 dyoung Apply the same keywords to the 32-bit compat files as apply to the
non-compat equivalent files, to stop amd64/sparc64 builds with MKxxx=no
options from failing because files in the DESTDIR are missing from the
METALOG.

amd64 builds, now, with several MKxxx=no options set. sparc64 probably
needs some more work.

FWIW, join(1) saved me some manual labor as I copied keywords from
non-compat to compat files:

1 Collect the files that are missing from the DESTDIR into
compat-i386.files

2 Replicate the first column of compat-i386.files. Remove i386/ from
the first column.

3 sort -k 1,1 distrib/sets/lists/comp/{md.amd64,mi,shl.*}
distrib/sets/lists/base/{md.amd64,mi,module.amd64,module.mi,shl.elf,sh
l.mi} | join -1 1 -2 1 -o '2.2 1.3' - compat-i386.files >
compat-i386.keywords

4 Process distrib/lists/{base,comp}/md.amd64 with join -1 1 -2 1 -o '1.1
1.2 1.3,2.2' -a1 - compat-i386.keywords
1.42 Fri Apr 17 20:38:04 GMT 2009 dyoung Apply the same keywords to the 32-bit compat files as apply to the
non-compat equivalent files, to stop amd64/sparc64 builds with MKxxx=no
options from failing because files in the DESTDIR are missing from the
METALOG.

amd64 builds, now, with several MKxxx=no options set. sparc64 probably
needs some more work.

FWIW, join(1) saved me some manual labor as I copied keywords from
non-compat to compat files:

1 Collect the files that are missing from the DESTDIR into
compat-i386.files

2 Replicate the first column of compat-i386.files. Remove i386/ from
the first column.

3 sort -k 1,1 distrib/sets/lists/comp/{md.amd64,mi,shl.*}
distrib/sets/lists/base/{md.amd64,mi,module.amd64,module.mi,shl.elf,sh
l.mi} | join -1 1 -2 1 -o '2.2 1.3' - compat-i386.files >
compat-i386.keywords

4 Process distrib/lists/{base,comp}/md.amd64 with join -1 1 -2 1 -o '1.1
1.2 1.3,2.2' -a1 - compat-i386.keywords
H A Dmd.amd641.88 Thu Dec 16 18:42:49 GMT 2010 christos sets for tzcode enhancements
1.46 Fri Apr 17 20:38:04 GMT 2009 dyoung Apply the same keywords to the 32-bit compat files as apply to the
non-compat equivalent files, to stop amd64/sparc64 builds with MKxxx=no
options from failing because files in the DESTDIR are missing from the
METALOG.

amd64 builds, now, with several MKxxx=no options set. sparc64 probably
needs some more work.

FWIW, join(1) saved me some manual labor as I copied keywords from
non-compat to compat files:

1 Collect the files that are missing from the DESTDIR into
compat-i386.files

2 Replicate the first column of compat-i386.files. Remove i386/ from
the first column.

3 sort -k 1,1 distrib/sets/lists/comp/{md.amd64,mi,shl.*}
distrib/sets/lists/base/{md.amd64,mi,module.amd64,module.mi,shl.elf,sh
l.mi} | join -1 1 -2 1 -o '2.2 1.3' - compat-i386.files >
compat-i386.keywords

4 Process distrib/lists/{base,comp}/md.amd64 with join -1 1 -2 1 -o '1.1
1.2 1.3,2.2' -a1 - compat-i386.keywords
1.46 Fri Apr 17 20:38:04 GMT 2009 dyoung Apply the same keywords to the 32-bit compat files as apply to the
non-compat equivalent files, to stop amd64/sparc64 builds with MKxxx=no
options from failing because files in the DESTDIR are missing from the
METALOG.

amd64 builds, now, with several MKxxx=no options set. sparc64 probably
needs some more work.

FWIW, join(1) saved me some manual labor as I copied keywords from
non-compat to compat files:

1 Collect the files that are missing from the DESTDIR into
compat-i386.files

2 Replicate the first column of compat-i386.files. Remove i386/ from
the first column.

3 sort -k 1,1 distrib/sets/lists/comp/{md.amd64,mi,shl.*}
distrib/sets/lists/base/{md.amd64,mi,module.amd64,module.mi,shl.elf,sh
l.mi} | join -1 1 -2 1 -o '2.2 1.3' - compat-i386.files >
compat-i386.keywords

4 Process distrib/lists/{base,comp}/md.amd64 with join -1 1 -2 1 -o '1.1
1.2 1.3,2.2' -a1 - compat-i386.keywords
/src/sys/uvm/
H A Duvm_bio.c1.95 Sat May 19 15:13:26 GMT 2018 jdolecek change code to take advantage of direct map when available, avoiding the need
to map pages into kernel

this improves performance of UBC-based (read(2)/write(2)) I/O especially
for cached block I/O - sequential read on my NVMe goes from 1.7 GB/s to 1.9 GB/s
for non-cached, and from 2.2 GB/s to 5.6 GB/s for cached read

the new code is conditional now and off for now, so that it can be tested further;
can be turned on by adjusting ubc_direct variable to true

part of fix for PR kern/53124
1.88 Mon Mar 20 22:57:04 GMT 2017 kre Ugh. This stuff is disgusting. We really need an arch dependent
PRIxOFF (and PRIdOFF) to print off_t's in a way that matches the
arch's definition of off_t.

In the meantime fall back on %jx and an (intmax_t) cast. Ugly.
(And the way it is written is even uglier...)
/src/distrib/sets/lists/misc/
H A Dmi1.123 Thu Aug 18 22:31:47 GMT 2005 rpaulo Added new files from Postfix 2.2.5.
1.88 Tue Jul 08 05:17:12 GMT 2003 itojun install more postfix README files. based on PR 22086
/src/distrib/sets/lists/base/
H A Dmd.amd641.88 Wed Apr 28 09:55:25 GMT 2010 lukem Fix MKDEBUG=yes library builds for amd64
1.44 Fri Apr 17 20:38:04 GMT 2009 dyoung Apply the same keywords to the 32-bit compat files as apply to the
non-compat equivalent files, to stop amd64/sparc64 builds with MKxxx=no
options from failing because files in the DESTDIR are missing from the
METALOG.

amd64 builds, now, with several MKxxx=no options set. sparc64 probably
needs some more work.

FWIW, join(1) saved me some manual labor as I copied keywords from
non-compat to compat files:

1 Collect the files that are missing from the DESTDIR into
compat-i386.files

2 Replicate the first column of compat-i386.files. Remove i386/ from
the first column.

3 sort -k 1,1 distrib/sets/lists/comp/{md.amd64,mi,shl.*}
distrib/sets/lists/base/{md.amd64,mi,module.amd64,module.mi,shl.elf,sh
l.mi} | join -1 1 -2 1 -o '2.2 1.3' - compat-i386.files >
compat-i386.keywords

4 Process distrib/lists/{base,comp}/md.amd64 with join -1 1 -2 1 -o '1.1
1.2 1.3,2.2' -a1 - compat-i386.keywords
1.44 Fri Apr 17 20:38:04 GMT 2009 dyoung Apply the same keywords to the 32-bit compat files as apply to the
non-compat equivalent files, to stop amd64/sparc64 builds with MKxxx=no
options from failing because files in the DESTDIR are missing from the
METALOG.

amd64 builds, now, with several MKxxx=no options set. sparc64 probably
needs some more work.

FWIW, join(1) saved me some manual labor as I copied keywords from
non-compat to compat files:

1 Collect the files that are missing from the DESTDIR into
compat-i386.files

2 Replicate the first column of compat-i386.files. Remove i386/ from
the first column.

3 sort -k 1,1 distrib/sets/lists/comp/{md.amd64,mi,shl.*}
distrib/sets/lists/base/{md.amd64,mi,module.amd64,module.mi,shl.elf,sh
l.mi} | join -1 1 -2 1 -o '2.2 1.3' - compat-i386.files >
compat-i386.keywords

4 Process distrib/lists/{base,comp}/md.amd64 with join -1 1 -2 1 -o '1.1
1.2 1.3,2.2' -a1 - compat-i386.keywords
/src/lib/libc/time/
H A Dzic.c1.88 Sun Jan 15 18:12:37 GMT 2023 christos Apply 9cfe9507fcc22cd4a0c4da486ea1c7f0de6b075f for C23 attribute compliance.
Requested by Jan-Benedict Glaw.
1.72 Sat Oct 27 22:29:24 GMT 2018 christos Welcome tzcode-2018g

Changes to code

When generating TZif files with leap seconds, zic no longer uses a
format that trips up older 32-bit clients, fixing a bug introduced
in 2018f. (Reported by Daniel Fischer.) Also, the zic workaround
for QTBUG-53071 now also works for TZif files with leap seconds.

The translator to rearguard format now rewrites the line
"Rule Japan 1948 1951 - Sep Sat>=8 25:00 0 S" to
"Rule Japan 1948 1951 - Sep Sun>=9 1:00 0 S".
This caters to zic before 2007 and to Oracle TZUpdater 2.2.0
and earlier. (Reported by Christos Zoulas.)

Changes to documentation

tzfile.5 has new sections on interoperability issues.
/src/bin/sh/
H A Deval.c1.88 Mon Oct 16 00:36:19 GMT 2006 christos branches: 1.88.2; 1.88.4; 1.88.8;
sprinkle volatile.
1.88 Mon Oct 16 00:36:19 GMT 2006 christos branches: 1.88.2; 1.88.4; 1.88.8;
sprinkle volatile.
1.88 Mon Oct 16 00:36:19 GMT 2006 christos branches: 1.88.2; 1.88.4; 1.88.8;
sprinkle volatile.
1.88 Mon Oct 16 00:36:19 GMT 2006 christos branches: 1.88.2; 1.88.4; 1.88.8;
sprinkle volatile.
1.4 Wed Jul 07 01:11:57 GMT 1993 jtc IEEE 1003.2 (D11.2.2.3) requires that the system's true and false be accessed
instead of searching $PATH. The best way to satisfy this requirement is to
make them builtins.

True was allready builtin, this patch adds false.
H A Dparser.c1.88 Wed Jan 01 18:29:39 GMT 2014 christos clarify further.
1.6 Wed Jul 07 01:11:59 GMT 1993 jtc IEEE 1003.2 (D11.2.2.3) requires that the system's true and false be accessed
instead of searching $PATH. The best way to satisfy this requirement is to
make them builtins.

True was allready builtin, this patch adds false.
/src/sys/compat/linux/common/
H A Dlinux_misc.c1.88 Sun May 20 09:29:10 GMT 2001 manu Added powerpc status in a comment
1.82 Fri Dec 29 21:07:16 GMT 2000 fvdl Hardcode what the linux uname() calls return (Linux 2.2.5 is the current
value). A few major applications check for this (like VMware), and
there is no other way to trick them. Needs a more generic solution
eventually.

Completed in 361 milliseconds

12