| /src/sys/arch/hpcarm/dev/ |
| wzero3_mci.c | 218 wzero3mci_set_power(void *arg, uint32_t ocr)
224 if (ISSET(ocr, MMC_OCR_3_2V_3_3V|MMC_OCR_3_3V_3_4V)) {
227 } else if (ocr == 0) {
232 "unsupported OCR (%#x)\n", ocr);
|
| nbpmci.c | 125 nbpmci_set_power(void *arg, uint32_t ocr)
|
| /src/sys/arch/zaurus/dev/ |
| zmci.c | 163 zmci_set_power(void *arg, uint32_t ocr)
167 if (ISSET(ocr, MMC_OCR_3_2V_3_3V|MMC_OCR_3_3V_3_4V)) {
175 if (ocr != 0) {
176 printf("%s: zmci_set_power(): unsupported OCR (%#x)\n",
177 device_xname(sc->sc.sc_dev), ocr);
|
| /src/sys/arch/arm/imx/ |
| imxpwm.c | 70 uint32_t cr, ocr; local in function:imxpwm_enable
72 ocr = cr = PWM_READ(sc, PWM_CR);
78 if (cr != ocr)
|
| /src/sys/dev/sdmmc/ |
| sdmmc_ioreg.h | 57 /* SD R4 response (IO OCR) */
59 #define SD_IO_OCR_NUM_FUNCTIONS(ocr) (((ocr) >> 28) & 0x7)
|
| sdmmcchip.h | 85 #define sdmmc_chip_bus_power(tag, handle, ocr) \
86 ((tag)->bus_power((handle), (ocr)))
|
| sdmmc_io.c | 87 * Read the I/O OCR value, determine the number of I/O
100 /* Parse the additional bits in the I/O OCR value. */
125 /* Send the new OCR value until all cards are ready. */
128 aprint_error_dev(sc->sc_dev, "couldn't send I/O OCR\n");
657 * Get or set the card's I/O OCR value (SDIO).
660 sdmmc_io_send_op_cond(struct sdmmc_softc *sc, u_int32_t ocr, u_int32_t *ocrp)
666 DPRINTF(("sdmmc_io_send_op_cond: ocr = %#x\n", ocr));
671 * If we change the OCR value, retry the command until the OCR
[all...] |
| sdmmc_mem.c | 150 uint32_t ocr = 0; local in function:sdmmc_mem_enable
169 SET(ocr, MMC_OCR_HCS);
173 * Read the SD/MMC memory OCR value by issuing CMD55 followed
174 * by ACMD41 to read the OCR value from memory-only SD cards.
180 ISSET(sc->sc_caps, SMC_CAPS_SPI_MODE) ? ocr : 0, &card_ocr);
190 DPRINTF(("%s: couldn't read memory OCR\n",
201 /* get card OCR */
202 error = sdmmc_mem_spi_read_ocr(sc, ocr, &card_ocr);
204 DPRINTF(("%s: couldn't read SPI memory OCR\n",
230 SET(ocr, MMC_OCR_HCS)
[all...] |
| sdhc.c | 73 uint32_t ocr; /* OCR value from capabilities */ member in struct:sdhc_host
494 SET(hp->ocr, MMC_OCR_HCS);
499 SET(hp->ocr, MMC_OCR_S18A);
503 SET(hp->ocr, MMC_OCR_S18A);
507 SET(hp->ocr, MMC_OCR_S18A);
511 SET(hp->ocr, MMC_OCR_1_65V_1_95V);
516 SET(hp->ocr, MMC_OCR_2_9V_3_0V | MMC_OCR_3_0V_3_1V);
520 SET(hp->ocr, MMC_OCR_3_2V_3_3V | MMC_OCR_3_3V_3_4V);
871 return hp->ocr;
[all...] |
| /src/sys/arch/evbarm/stand/boot2440/ |
| dev_sdmmc.c | 475 uint32_t ocr = 0; local in function:sdmmc_enable
502 SET(ocr, MMC_OCR_HCS);
505 * Read the SD/MMC memory OCR value by issuing CMD55 followed
506 * by ACMD41 to read the OCR value from memory-only SD cards.
512 ISSET(sc->caps, SMC_CAPS_SPI_MODE) ? ocr : 0, &card_ocr);
522 DPRINTF(("couldn't read memory OCR\n"));
533 /* get card OCR */
534 error = sdmmc_mem_spi_read_ocr(sc, ocr, &card_ocr);
536 DPRINTF(("%s: couldn't read SPI memory OCR\n",
551 host_ocr |= ocr;
[all...] |
| s3csdi.c | 438 s3csd_bus_power(void *priv, int ocr)
|
| /src/sys/arch/evbarm/gumstix/ |
| gxmci.c | 130 gxmci_set_power(void *arg, uint32_t ocr)
|
| /src/sys/arch/evbarm/g42xxeb/ |
| g42xxeb_mci.c | 206 g42xxeb_mci_set_power(void *arg, uint32_t ocr)
|
| /src/sys/arch/evbsh3/t_sh7706lan/ |
| scimci.c | 370 scimci_bus_power(sdmmc_chipset_handle_t sch, uint32_t ocr)
373 if ((ocr & (MMC_OCR_3_2V_3_3V|MMC_OCR_3_3V_3_4V)) == 0)
|
| ssumci.c | 307 ssumci_bus_power(sdmmc_chipset_handle_t sch, uint32_t ocr)
310 if ((ocr & (MMC_OCR_3_2V_3_3V|MMC_OCR_3_3V_3_4V)) == 0)
|
| /src/sys/arch/x68k/x68k/ |
| iodevice.h | 62 unsigned char ocr; member in struct:dmac
|
| /src/sys/dev/ic/ |
| w83l518d_sdmmc.c | 265 wb_sdmmc_bus_power(sdmmc_chipset_handle_t sch, uint32_t ocr)
267 REPORT(sch, "TRACE: sdmmc/bus_power(wb, ocr=%x)\n", ocr);
|
| rtsx.c | 785 rtsx_bus_power(sdmmc_chipset_handle_t sch, uint32_t ocr)
790 DPRINTF(1,("%s: voltage change ocr=0x%x\n", DEVNAME(sc), ocr));
804 if (ocr == 0) {
810 if (!ISSET(ocr, RTSX_SUPPORT_VOLTAGE)) {
812 DPRINTF(1,("%s: unsupported voltage ocr=0x%x\n",
813 DEVNAME(sc), ocr));
|
| pl181.c | 331 plmmc_bus_power(sdmmc_chipset_handle_t sch, uint32_t ocr)
|
| dwc_mmc.c | 315 dwc_mmc_bus_power(sdmmc_chipset_handle_t sch, uint32_t ocr)
319 if (ocr == 0)
|
| /src/sys/arch/x68k/dev/ |
| intio_dmac.c | 165 uint8_t dcr, uint8_t ocr)
206 chan->ch_ocr = ocr;
220 /* OCR will be written at dmac_load_xfer() */
573 printf("CSR=%02x, CER=%02x, DCR=%02x, OCR=%02x, SCR=%02x, "
|
| /src/sys/arch/arm/xscale/ |
| pxa2x0_mci.c | 427 pxamci_bus_power(sdmmc_chipset_handle_t sch, uint32_t ocr)
437 return (*sc->sc_tag.set_power)(sc->sc_tag.cookie, ocr);
|
| /src/sys/arch/arm/amlogic/ |
| meson_sdio.c | 430 meson_sdio_bus_power(sdmmc_chipset_handle_t sch, uint32_t ocr)
|
| /src/sys/arch/arm/broadcom/ |
| bcm2835_sdhost.c | 542 sdhost_bus_power(sdmmc_chipset_handle_t sch, uint32_t ocr)
|
| /src/sys/dev/marvell/ |
| mvsdio.c | 421 mvsdio_bus_power(sdmmc_chipset_handle_t sch, uint32_t ocr)
|
