| History log of /src/sys/dev/pci/ixgbe/ixgbe_vf.c |
| Revision | | Date | Author | Comments |
| 1.33 |
| 06-Oct-2023 |
msaitoh | ixv(4): Add new IXGBE_VF_GET_LINK_STATE message support.
PF can control vf's link state by this change. Note that Linux's PF driver
can't control the link to force up (i.e. ip link set XXX vf Y state enable).
From FreeBSD ixv-1.5.30.
|
| 1.32 |
| 06-Oct-2023 |
msaitoh | ixv(4): Improve error check.
ixgbe_vf.c rev. 1.31 changed the behavior of the ixgbe_check_mac_link_vf()
function. It was from FreeBSD's ixv-1.5.25 to resolve mailbox collision
problem. The change had a problem that error checks have not done at all if
the API version >= 1.5. Fix it. From FreeBSD ixv-1.5.27.
|
| 1.31 |
| 24-Dec-2021 |
msaitoh | branches: 1.31.4;
Add code to support API version 1.5. No functional change.
- This change adds almost all code to support API 1.5 except real negotiation
and upgrade mailbox functions.
- From ix-3.3.18, ix-3.3.22 and ixv-1.5.24.
|
| 1.30 |
| 24-Dec-2021 |
msaitoh | Whitespace fix. Remove old comment. No functional change.
- From FreeBSD ixv-1.5.22.
|
| 1.29 |
| 24-Dec-2021 |
msaitoh | Update copyright to 2020.
FreeBSD: 8455e365f77f5b66ac9521dbcd690f79345ce147
|
| 1.28 |
| 24-Dec-2021 |
msaitoh | Rename IXGBE_VT_MSGTYPE_{ACK,NACK} to IXGBE_VT_MSGTYPE_{SUCCESS,FAILURE}.
- Sync with FreeBSD ix-3.3.18.
- No functional change.
|
| 1.27 |
| 30-Apr-2021 |
msaitoh | Add missing __KERNEL_RCSID().
|
| 1.26 |
| 20-Jan-2021 |
msaitoh | branches: 1.26.4;
The max number of queue(pair) is not 7 but 8. Inspired by DPDK.
|
| 1.25 |
| 30-Nov-2020 |
msaitoh | s/ we we / we /
|
| 1.24 |
| 22-Jul-2020 |
msaitoh | branches: 1.24.2;
s/reseting/resetting/
|
| 1.23 |
| 05-Feb-2020 |
msaitoh | No functional change:
- Fix typos.
- Remove extra newline.
|
| 1.22 |
| 20-Sep-2019 |
msaitoh | branches: 1.22.2;
- Make ixv_set_multi() work correctly (especially for PROMISC) when the
function is called from if_init().
- If a multicast entry has range, use ALLMULTI like others.
- Remove ixv_set_promisc() and use ixv_set_multi(). And then, rename
*_set_multi() to *_set_rxfilter(). Same as ixgbe.c.
- The promisc mode can't be enabled if the PF is not in promisc mode.
Identify that state and report it as "the PF may not in promisc mode"
(though it might not be perfect).
|
| 1.21 |
| 12-Sep-2019 |
msaitoh | Add support ALLMULTI on ixv(4):
- Negotiate API version up to 1.3.
- On linux's PF driver implementation, the PF replies VF's XCAST_MODE_ALLMULTI
message not with NACK but with ACK even if the virtual function is NOT
marked "trust" and act as XCAST_MODE_"MULTI". If ixv(4) simply check the
return vaule of update_xcast_mode(XCAST_MODE_ALLMULTI), SIOCSADDMULTI
success and the user may have trouble with some addresses. Fortunately,
the Linux's PF driver's "ACK" message has not XCAST_MODE_"ALL"MULTI but
XCAST_MODE_MULTI, so we can check this state by checking if the send
message's argument and the reply message's argument are different.
- Noy yet for PROMISC.
|
| 1.20 |
| 12-Sep-2019 |
msaitoh | - Make SIOCADDMULTI returns ENOSPC when the Ethenet multicast address list
exceeds the limit.
- State "Ethernet" multicast address.
- Use macro.
|
| 1.19 |
| 11-Sep-2019 |
msaitoh | Print message when the number of multicast addresses exceeded the limit (30).
|
| 1.18 |
| 02-Jul-2019 |
msaitoh | branches: 1.18.2;
Other than IXGBE_VF_RESET should wait ACK, so use ixgbevf_write_msg_read_ack()
instead of write_posted() in ixgbe_update_mc_addr_list_vf().
|
| 1.17 |
| 04-Apr-2018 |
msaitoh | branches: 1.17.2;
Sync with FreeBSD r331224 except ixv_if_update_admin_status()'s change:
- Fix length of reading buffer when the command is Read Flash in
ixgbe_host_interface_command().
- Add missing start_hw() call in ixv_init_locked(). This is not a real bug
because start_hw just set hw->adapter_stopped to false and anyone refer it.
- Style change.
- Update comment.
|
| 1.16 |
| 04-Apr-2018 |
msaitoh | Sync with the remaining part of FreeBSD r328265 except sfp_reinit stuff:
- Always schedule module intterrupt in ixgbe_config_link() when a device is
SFP+ based.
- Use not loop index but txr->me in ixv_initialize_{transmit,receive}_units().
It's required for VMDQ but NetBSD doesn't use it, so it's not a bug in
NetBSD.
- Simplify ixgbe_bp_wd_set(). No functional change.
- Whitespace.
|
| 1.15 |
| 06-Dec-2017 |
msaitoh | branches: 1.15.2;
Sync with FreeBSD's r326022. All of the following changes have no influence
to netbsd:
- Check ETHERCAP_VLAN_HWTAGGING in ixgbe_setup_vlan_hw_support(). This change
has no influence to netbsd because it's enabled by default and NetBSD has
no API to disable it.
- Fix for netmap module.
- Remove never defined UDP_IPV4_EX
- Add SPDX-License-Identifier
|
| 1.14 |
| 13-Oct-2017 |
msaitoh | Show 2.5GBASE-T and 5GBASE-T correctly on ixv(4). Tested on a virtual function
on X550 T1.
|
| 1.13 |
| 30-Aug-2017 |
msaitoh | - Sync with FreeBSD r320688 (and up to r322865):
- Add C3000(Denvertion(-NS)) support.
- Add bypass function support for bypass adapters. Sysctls are provided.
Not tested because I have no any bypass adapter.
- ixv(4): set RSS mapping.
- Change EEE sysctl.
- ixv(4): Add TSOv6.
- ixv(4): Mailbox API 1.2 and more are implemented and comment says it
negotiate with 1.2 but it really does 1.1...
- Remove thermal test sysctl.
- Fix unknown bugs.
- Print driver feature capabilities and enable bits when verbose boot.
|
| 1.12 |
| 02-Dec-2016 |
msaitoh | branches: 1.12.8;
Update ixg(4) and ixv(4) up to FreeBSD r292674:
- Add X552 SFP+ and X550T single port.
- Bug fixes.
|
| 1.11 |
| 02-Dec-2016 |
msaitoh | Update ixg(4) and ixv(4) up to FreeBSD r289238:
- Add support for sysctl knobs to live tune the per interrupt rx/tx packet
processing limits in ixgbe(4)
- Some others (netmap, etc.)
|
| 1.10 |
| 02-Dec-2016 |
msaitoh | Update ixg(4) and ixv(4) up to FreeBSD r285590:
- Fix igxbe SRIOV VF (if_ixv) initialization bugs. The MAC address for
an if_ixv instance can now set at creation time, and the receive ring
tail pointer is correctly initialized (previously, things still worked
because the receive ring tail pointer was being fixed up as a side
effect of other activity).
|
| 1.9 |
| 02-Dec-2016 |
msaitoh | Update ixg(4) and ixv(4) up to FreeBSD r283881:
- SRIOV support (not enabled because NetBSD doesn't support it).
|
| 1.8 |
| 01-Dec-2016 |
msaitoh | Update ixg(4) and ixv(4) up to FreeBSD r282299:
- Add support for X55x.
- ADD EEE support (not tested).
- Add WOL support (not tested).
- Add suspend/resume support (not testd).
- Add LPLU support (not tested).
- Add DMA Coalescing (note verified).
- Not tested well for sysctls.
- Fix ixgbe_set_advertise() a bit. At least, FreeBSD r294578 is required
to work hw.ixg0.advertise_speed sysctl correctly.
|
| 1.7 |
| 01-Dec-2016 |
msaitoh | Update ixg(4) and ixv(4) up to FreeBSD r280197:
- Add support for 82599_QSFP_SF_QP and X540T1.
- Add partial support for X55x. It's required to sync with FreeBSD r282299
to support X55x.
- Bugfixes.
|
| 1.6 |
| 06-Feb-2016 |
riastradh | branches: 1.6.2;
Convert bool to target type before shift.
|
| 1.5 |
| 05-Aug-2015 |
msaitoh | Sync ixg(4) up to FreeBSD r279805 (or r280181) which include some bugfixes.
TODO:
- Merge r280182 and newer. It's required to support X55x.
- MSI/MSI-X support.
|
| 1.4 |
| 24-Apr-2015 |
msaitoh | Sync ixg(4) up to FreeBSD r250108:
- Cleanup some unused counters and some unused code.
- Improve performance.
- Fix flow control - don't override user value on re-init
- Fix to make 1G optics work correctly
- Change to interrupt enabling - some bits were incorrect
for certain hardware.
- Certain stats fixes, remove a duplicate increment of
ierror, thanks to Scott Long for pointing these out.
- Fix the setting of RX which related to multicast.
- Some netmap related fixes.
|
| 1.3 |
| 02-Apr-2015 |
msaitoh | Update our ixg(4) driver up to FreeBSD r238149:
- Add TSO6 support.
- The max size in dma tag is changed from 65535 to 262140 (IXGBE_TSO_SIZE).
The value is the same as other *BSDs. The change might cause a address
space shortage (ixgbe_dmamap_create() might fail) on some machines.
- Fix a lot of bugs.
- Improve performance.
|
| 1.2 |
| 27-Mar-2015 |
msaitoh | Synchronize our ixg(4) driver up to FreeBSD r230775:
- Add X540 support.
- Add 100BaseTX support.
- Fix a lot of bugs.
- Improve performance.
|
| 1.1 |
| 12-Aug-2011 |
dyoung | branches: 1.1.12; 1.1.28; 1.1.30;
Add sources for ixgbe(4), a Intel 82599 10-gigabit ethernet driver
ported from FreeBSD.
|
| 1.1.30.5 |
| 05-Dec-2016 |
skrll | Sync with HEAD
|
| 1.1.30.4 |
| 19-Mar-2016 |
skrll | Sync with HEAD
|
| 1.1.30.3 |
| 22-Sep-2015 |
skrll | Sync with HEAD
|
| 1.1.30.2 |
| 06-Jun-2015 |
skrll | Sync with HEAD
|
| 1.1.30.1 |
| 06-Apr-2015 |
skrll | Sync with HEAD
|
| 1.1.28.3 |
| 14-Jun-2016 |
snj | Pull up following revision(s) (requested by msaitoh in ticket #1174):
sys/dev/pci/ixgbe/README: 1.2
sys/dev/pci/ixgbe/ixgbe.c: 1.30-1.33, 1.35 via patch
sys/dev/pci/ixgbe/ixgbe.h: 1.8 via patch
sys/dev/pci/ixgbe/ixgbe_82598.c: 1.5 via patch
sys/dev/pci/ixgbe/ixgbe_82599.c: 1.10 via patch
sys/dev/pci/ixgbe/ixgbe_api.c: 1.8-1.11 via patch
sys/dev/pci/ixgbe/ixgbe_api.h: 1.5-1.6 via patch
sys/dev/pci/ixgbe/ixgbe_common.c: 1.6-1.7 via patch
sys/dev/pci/ixgbe/ixgbe_common.h: 1.5 via patch
sys/dev/pci/ixgbe/ixgbe_osdep.h: 1.9 via patch
sys/dev/pci/ixgbe/ixgbe_phy.c: 1.6 via patch
sys/dev/pci/ixgbe/ixgbe_phy.h: 1.5 via patch
sys/dev/pci/ixgbe/ixgbe_type.h: 1.11, 1.13 via patch
sys/dev/pci/ixgbe/ixgbe_vf.c: 1.5-1.6 via patch
sys/dev/pci/ixgbe/ixv.c: 1.9-1.10, 1.12-1.14 via patch
sys/dev/pci/ixgbe/ixv.h: 1.6 via patch
sys/dev/pci/ixgbe/ixgbe_dcb.c: 1.1
sys/dev/pci/ixgbe/ixgbe_dcb.h: 1.1
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c: 1.1
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h: 1.1
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c: 1.1
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h: 1.1
Sync ixg(4) up to ixgbe.c rev. 1.35 except MSI/MSI-X and NET_MPSAFE:
- Sync ixg(4) up to FreeBSD r279805 (or r280181) which include some
bugfixes.
- Add missing evcnt_detach(&rxr->rx_copies) in ixgbe_detach().
- Fix error path in ixgbe_attach() and ixgbe_detatch() to prevent
panic.
- Remove unreachable code.
- Remove duplicated assignment of mh->m_len.
- Reduce the diff against FreeBSD (tabs, spaces and comments)
- ixv.c: Fix unintialized data. Include vlan.h and check NVLAN.
- Avoid shadowing global `min'.
|
| 1.1.28.2 |
| 06-May-2015 |
riz | Pull up following revisions (requested by msaitoh in ticket #734):
sys/dev/pci/ixgbe/LICENSE 1.2
sys/dev/pci/ixgbe/ixgbe.c 1.28-1.29
sys/dev/pci/ixgbe/ixgbe.h 1.7
sys/dev/pci/ixgbe/ixgbe_82598.c 1.4
sys/dev/pci/ixgbe/ixgbe_82598.h 1.3
sys/dev/pci/ixgbe/ixgbe_82599.c 1.9
sys/dev/pci/ixgbe/ixgbe_82599.h 1.2
sys/dev/pci/ixgbe/ixgbe_api.c 1.7
sys/dev/pci/ixgbe/ixgbe_api.h 1.4
sys/dev/pci/ixgbe/ixgbe_common.c 1.5
sys/dev/pci/ixgbe/ixgbe_common.h 1.4
sys/dev/pci/ixgbe/ixgbe_mbx.h 1.4
sys/dev/pci/ixgbe/ixgbe_netbsd.h 1.3
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.7
sys/dev/pci/ixgbe/ixgbe_phy.c 1.5
sys/dev/pci/ixgbe/ixgbe_phy.h 1.4
sys/dev/pci/ixgbe/ixgbe_type.h 1.10
sys/dev/pci/ixgbe/ixgbe_vf.c 1.4
sys/dev/pci/ixgbe/ixgbe_vf.h 1.5
sys/dev/pci/ixgbe/ixgbe_x540.c 1.3
sys/dev/pci/ixgbe/ixgbe_x540.h 1.2
sys/dev/pci/ixgbe/ixv.c 1.8
- Sync ixg(4) up to FreeBSD r250108:
- Cleanup some unused counters and some unused code.
- Improve performance.
- Fix flow control - don't override user value on re-init
- Fix to make 1G optics work correctly
- Change to interrupt enabling - some bits were incorrect
for certain hardware.
- Certain stats fixes, remove a duplicate increment of
ierror, thanks to Scott Long for pointing these out.
- Fix the setting of RX which related to multicast.
- Some netmap related fixes.
- Fixes link error without vlan. PR#49879 reported by Hauke Fath.
[msaitoh, ticket #734]
|
| 1.1.28.1 |
| 19-Apr-2015 |
riz | Apply patch (requested by msaitoh in ticket #697):
sys/dev/pci/files.pci 1.375 via patch
sys/dev/pci/ixgbe/ixgbe.c 1.24-1.27 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.4-1.6 via patch
sys/dev/pci/ixgbe/ixgbe_82598.c 1.2-1.3 via patch
sys/dev/pci/ixgbe/ixgbe_82598.h 1.1-1.2 via patch
sys/dev/pci/ixgbe/ixgbe_82599.c 1.6-1.8 via patch
sys/dev/pci/ixgbe/ixgbe_82599.h 1.1 via patch
sys/dev/pci/ixgbe/ixgbe_api.c 1.5-1.6 via patch
sys/dev/pci/ixgbe/ixgbe_api.h 1.2-1.3 via patch
sys/dev/pci/ixgbe/ixgbe_common.c 1.3-1.4 via patch
sys/dev/pci/ixgbe/ixgbe_common.h 1.2-1.3 via patch
sys/dev/pci/ixgbe/ixgbe_mbx.c 1.2-1.3 via patch
sys/dev/pci/ixgbe/ixgbe_mbx.h 1.2-1.3 via patch
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.4-1.6 via patch
sys/dev/pci/ixgbe/ixgbe_phy.c 1.3-1.4 via patch
sys/dev/pci/ixgbe/ixgbe_phy.h 1.2-1.3 via patch
sys/dev/pci/ixgbe/ixgbe_type.h 1.8-1.9 via patch
sys/dev/pci/ixgbe/ixgbe_vf.c 1.2-1.3 via patch
sys/dev/pci/ixgbe/ixgbe_vf.h 1.3-1.4 via patch
sys/dev/pci/ixgbe/ixgbe_x540.c 1.1-1.2 via patch
sys/dev/pci/ixgbe/ixgbe_x540.h 1.1 via patch
sys/dev/pci/ixgbe/ixv.c 1.5-1.7 via patch
sys/dev/pci/ixgbe/ixv.h 1.4-1.5 via patch
Synchronize our ixg(4) driver up to FreeBSD r243716:
- Add X540 support.
- Add TSO6 support.
- Add 100BaseTX support.
- The max size in dma tag is changed from 65535 to 262140 (IXGBE_TSO_SIZE).
The value is the same as other *BSDs. The change might cause a address
space shortage (ixgbe_dmamap_create() might fail) on some machines.
- Show 1000Base-SX correctly.
- Fix if_baudrate from 1G to 10G.
- Fix a bug that ifconfig -z (SOICZIFDATA) doesn't work.
- Fix a lot of bugs.
- Improve performance.
[msaitoh, ticket #697]
|
| 1.1.12.1 |
| 03-Dec-2017 |
jdolecek | update from HEAD
|
| 1.6.2.1 |
| 07-Jan-2017 |
pgoyette | Sync with HEAD. (Note that most of these changes are simply $NetBSD$
tag issues.)
|
| 1.12.8.10 |
| 08-Oct-2023 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #1745):
sys/dev/pci/ixgbe/ixgbe.c 1.327-1.332 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.87-1.88
sys/dev/pci/ixgbe/ixv.c 1.184-1.185
sys/dev/pci/ixgbe/ix_txrx.c 1.101
sys/dev/pci/ixgbe/ixgbe_82599.c 1.30
sys/dev/pci/ixgbe/ixgbe_vf.c 1.32-1.33
sys/dev/pci/ixgbe/ixgbe_vf.h 1.18
sys/dev/pci/ixgbe/ixgbe_mbx.h 1.20
sys/dev/pci/ixgbe/ixgbe_type.h 1.57
- Reorder some event counters for readability.
- Rename some descriptions of event counters.
- Count Queue Bytes {Transmit, Receive} counter.
- Improve error check in ixgbe_check_mac_link_vf().
- Add new IXGBE_VF_GET_LINK_STATE message support.
The VF's link state can be forced to down by PF.
- Update FCTRL after writing multicast filter.
- Update comments.
|
| 1.12.8.9 |
| 31-Jan-2022 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #1730):
sys/dev/pci/ixgbe/ixgbe_mbx.h: revision 1.19
sys/dev/pci/ixgbe/ixgbe_vf.c: revision 1.31
sys/dev/pci/ixgbe/ixgbe_x540.c: revision 1.23
sys/dev/pci/ixgbe/if_sriov.c: revision 1.17
sys/dev/pci/ixgbe/ixv.c: revision 1.172
sys/dev/pci/ixgbe/ixv.c: revision 1.173
sys/dev/pci/ixgbe/ixgbe.c: revision 1.301
sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.55
sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.29
sys/dev/pci/ixgbe/ixgbe_mbx.c: revision 1.16
sys/dev/pci/ixgbe/ixgbe_mbx.c: revision 1.17
sys/dev/pci/ixgbe/ixgbe_mbx.c: revision 1.18
Add code to support API version 1.5. No functional change.
- This change adds almost all code to support API 1.5 except real negotiation
and upgrade mailbox functions.
- From ix-3.3.18, ix-3.3.22 and ixv-1.5.24.
Enable mailbox API 1.5 support. Tested on ESXi with ixgben 1.10.3.0.
Don't clear mailbox related counters in ixgbe_upgrade_mbx_params_vf().
Don't clear mailbox related counters in ixgbe_upgrade_mbx_params_pf().
|
| 1.12.8.8 |
| 30-Jan-2022 |
martin | Pull up the following, requested by msaitoh in ticket #1729:
sys/dev/pci/ixgbe/if_sriov.c 1.12-1.16
sys/dev/pci/ixgbe/ixgbe.c 1.295-1.297,1.300,1.304 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.84
sys/dev/pci/ixgbe/ixgbe_82598.c 1.17-1.18
sys/dev/pci/ixgbe/ixgbe_82598.h 1.9
sys/dev/pci/ixgbe/ixgbe_82599.c 1.24-1.28
sys/dev/pci/ixgbe/ixgbe_82599.h 1.8
sys/dev/pci/ixgbe/ixgbe_api.c 1.26-1.27
sys/dev/pci/ixgbe/ixgbe_api.h 1.16
sys/dev/pci/ixgbe/ixgbe_bypass.h 1.3
sys/dev/pci/ixgbe/ixgbe_common.c 1.34-1.42
sys/dev/pci/ixgbe/ixgbe_common.h 1.15-1.16
sys/dev/pci/ixgbe/ixgbe_dcb.c 1.12-1.13
sys/dev/pci/ixgbe/ixgbe_dcb.h 1.8-1.9
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c 1.10-1.12
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h 1.8
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c 1.10-1.11
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h 1.8
sys/dev/pci/ixgbe/ixgbe_fdir.h 1.4
sys/dev/pci/ixgbe/ixgbe_features.h 1.4
sys/dev/pci/ixgbe/ixgbe_mbx.c 1.13-1.15
sys/dev/pci/ixgbe/ixgbe_mbx.h 1.15-1.18
sys/dev/pci/ixgbe/ixgbe_netmap.c 1.5
sys/dev/pci/ixgbe/ixgbe_osdep.c 1.8
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.31
sys/dev/pci/ixgbe/ixgbe_phy.c 1.25-1.29
sys/dev/pci/ixgbe/ixgbe_phy.h 1.13
sys/dev/pci/ixgbe/ixgbe_rss.h 1.6
sys/dev/pci/ixgbe/ixgbe_sriov.h 1.5
sys/dev/pci/ixgbe/ixgbe_type.h 1.51-1.54
sys/dev/pci/ixgbe/ixgbe_vf.c 1.28-1.29
sys/dev/pci/ixgbe/ixgbe_vf.h 1.15
sys/dev/pci/ixgbe/ixgbe_x540.c 1.20-1.22
sys/dev/pci/ixgbe/ixgbe_x540.h 1.10
sys/dev/pci/ixgbe/ixgbe_x550.c 1.21-1.25
sys/dev/pci/ixgbe/ixgbe_x550.h 1.7
sys/dev/pci/ixgbe/ixv.c 1.170, 1.174-1.175 via patch
- Add typecast for type mismatch.
- Fix retry count calculation of I2C read/write.
- Wait longer for link after fiber MAC setup.
- ixv(4): Use adapter->mta for the multicast array memory instead of
the on-stack array.
- Match X550_PHY_ID correctly on X550.
- Print NVM image version on 82598.
- Use 64bit for lxon + lxoff.
- Don't expose garbage data of hw.ixvN.debug.
- Some NetBSD unrelated changes:
- Fix infinite recursion on PCIe link down if VMDQ is used.
- Move PF mailbox initialization from ixgbe_attach() to
ixgbe_init_iov().
- Add IPv6 mask for flow director.
- Change error level in ixgbe_fc_autoneg().
- Check host interface return status when writing NVM.
- Change DCB credit parameters.
- Restore some mailbox related functions. Revert part of ixgbe_mbx.c
rev. 1.7 and ixgbe_mbx.h rev. 1.11. No functional change.
- Rename IXGBE_VT_MSGTYPE_{ACK,NACK} to
IXGBE_VT_MSGTYPE_{SUCCESS,FAILURE}. No functional change.
- Remove unused argument. Change argument.
- Remove unnecessary return value check.
- Remove debug error message.
- Remove dead code.
- Add some unused macros.
- Fix typo in comment.
- Rename some functions.
- Sort lines, modify comment.
- Whitespace fix.
|
| 1.12.8.7 |
| 15-Sep-2021 |
martin | Pull up the following (all via patch), requested by msaitoh in ticket #1696:
sysdev/pci/ixgbe/ixgbe.c 1.252, 1.280-1.283, 1.286-1.287, 1.289-1.290 via patch
sysdev/pci/ixgbe/ixgbe.h 1.73, 1.76-1.80 via patch
sysdev/pci/ixgbe/ix_txrx.c 1.68-1.93
sysdev/pci/ixgbe/ixv.c 1.153, 1.157-1.161, 1.163-1.166 via patch
sysdev/pci/ixgbe/if_bypass.c 1.7-1.9
sysdev/pci/ixgbe/if_fdir.c 1.4-1.5
sysdev/pci/ixgbe/if_sriov.c 1.10-1.11
sysdev/pci/ixgbe/ixgbe_82598.c 1.16
sysdev/pci/ixgbe/ixgbe_82599.c 1.23
sysdev/pci/ixgbe/ixgbe_api.c 1.25
sysdev/pci/ixgbe/ixgbe_bypass.h 1.2
sysdev/pci/ixgbe/ixgbe_common.c 1.30-1.33
sysdev/pci/ixgbe/ixgbe_dcb.c 1.10-1.11
sysdev/pci/ixgbe/ixgbe_dcb.h 1.7
sysdev/pci/ixgbe/ixgbe_dcb_82598.c 1.8-1.9
sysdev/pci/ixgbe/ixgbe_dcb_82598.h 1.7
sysdev/pci/ixgbe/ixgbe_dcb_82599.c 1.8-1.9
sysdev/pci/ixgbe/ixgbe_dcb_82599.h 1.7
sysdev/pci/ixgbe/ixgbe_fdir.h 1.3
sysdev/pci/ixgbe/ixgbe_features.h 1.3
sysdev/pci/ixgbe/ixgbe_mbx.c 1.12
sysdev/pci/ixgbe/ixgbe_netbsd.c 1.16-1.17
sysdev/pci/ixgbe/ixgbe_netbsd.h 1.13-1.14
sysdev/pci/ixgbe/ixgbe_netmap.c 1.3-1.4
sysdev/pci/ixgbe/ixgbe_netmap.h 1.2
sysdev/pci/ixgbe/ixgbe_osdep.c 1.7
sysdev/pci/ixgbe/ixgbe_osdep.h 1.29-1.30
sysdev/pci/ixgbe/ixgbe_phy.c 1.24
sysdev/pci/ixgbe/ixgbe_rss.h 1.5
sysdev/pci/ixgbe/ixgbe_sriov.h 1.4
sysdev/pci/ixgbe/ixgbe_type.h 1.49
sysdev/pci/ixgbe/ixgbe_vf.c 1.27
sysdev/pci/ixgbe/ixgbe_x540.c 1.18-1.19
sysdev/pci/ixgbe/ixgbe_x540.h 1.9
sysdev/pci/ixgbe/ixgbe_x550.c 1.19-1.20
sysdev/pci/ixgbe/ixgbe_x550.h 1.6
sysdev/pci/files.pci 1.438
share/man/man4/ixg.4 1.15
share/man/man4/ixv.4 1.8
- Use MCLGET() instead of homegrown cluster (jcl) allocation mechanism.
Before this commit, resource shortage was easily occurred because
the total number of the clusters is small.
- Improve performance:
- Use m_adj(ETHER_ALIGN) more.
- Sprinkle __predict_false() in the RX path.
- Don't pre-allocate a cluster for RXCOPY case to improve short
packet's performance.
- Call bus_dmamap_unload(9) via ixgbe_dmamap_unload(), before freeing
DMA buffer. Also, when the buffer is already freed, do not call
bus_dmamap_unload(9) (no resource leaks with this change). This
change is required to make ixg(4) work on alpha.
- Keep m_len and m_pkthdr.len consistent to prevent panic on arm.
- Fix panic when bus_dmamap_load_mbuf() failed in
ixgbe_setup_receive_ring().
- Added BUS_DMA_COHERENT flag to bus_dmamem_map() to improve stability
on aarch64.
- Use uint64_t instead of bus_addr_t for the TX descriptor's buffer
address. At least, this change is required for macppc
(sizeof(bus_addr_t) == 4) to make TX work.
- Fix little-endian dependence.
- Set rxr->next_to_refresh correctly in ixgbe_setup_receive_ring().
- Refresh unrefreshed descriptors' buffers correctly.
- Don't call bus_dmamap_sync with rx_mbuf_sz(== MCLBYTES) to prevent
panic.
- Save the discard_multidesc state to not to forget the state by
exiting rxeof().
- Add missing increment of no_mbuf error counter.
- Don't increment no_mbuf evcnt(9) when discarding multi-descriptor
packet.
- ixv: Modify error message to sync with ixgbe.c
- Print the error value of ixgbe_reset_hw() for debugging.
- Remove extra unlock/lock processing around if_percpuq_enqueue().
- Refactor rxr->next_to_check updating.
- Add new sysctl "rx_copy_len".
- Add a new sysctl to read rxr->next_to_refresh.
- Print error number when error occurred.
- Rename ix{gbe,v}_stop() with ix{gbe,v}_stop_locked(). No functional
change.
- Don't use fixed value.
- Comment out flow director processing in fast path.
- Add missing NetBSD RCS IDs and __KERNEL_RCSID()s.
- KNF.
- Fix typos.
|
| 1.12.8.6 |
| 11-Mar-2021 |
martin | Pull up the following (all via patch), requested by msaitoh in ticket #1663:
sys/dev/pci/ixgbe/ixgbe.c 1.259, 1.278-1.279
sys/dev/pci/ixgbe/ixgbe.h 1.75
sys/dev/pci/ixgbe/ixgbe_netbsd.h 1.12
sys/dev/pci/ixgbe/ixgbe_vf.c 1.24-1.26
sys/dev/pci/ixgbe/ixgbe_x550.c 1.17
sys/dev/pci/ixgbe/ixv.c 1.155-1.156
sys/dev/pci/ixgbe/ix_txrx.c 1.64-67
sys/dev/pci/files.pci 1.436
share/man/man4/ixg.4 1.13-1.14
share/man/man4/ixv.4 1.3, 1.6-1.7
- Fix a problem that the RX path stalled when the mbuf cluster is
exhausted.
- Modify some parameters to reduce packet dropping. See also the
manual's OPTIONS section for the detail.
- ixv(4): The max number of queue(pair) is not 7 but 8. Correctly
reset the hardware.
- Add "TX " to "Queue No Descriptor Available" evcnt(9) name to make
it more understandable.
- Fix a bug that some advertise speeds can't be set with
hw.ixgN.advertise_speed if both 2.5G and 5G are set. Fix the error
message, too.
- Fix typo in comment or debug message.
|
| 1.12.8.5 |
| 05-Aug-2020 |
martin | Pull up the following revisions, requested by msaitoh in ticket #1587:
sys/dev/pci/ixgbe/ix_txrx.c 1.62-1.63 via patch
sys/dev/pci/ixgbe/ixgbe.c 1.225, 1.228-1.229,
1.232 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.64, 1.66
sys/dev/pci/ixgbe/ixv.c 1.146, 1.148-1.150
via patch
sys/dev/pci/ixgbe/ixgbe_common.c 1.27
sys/dev/pci/ixgbe/ixgbe_vf.c 1.23
sys/dev/pci/ixgbe/ixgbe_82598.c 1.15
sys/dev/pci/ixgbe/ixgbe_x550.c 1.18
sys/dev/pci/ixgbe/ixgbe_netbsd.c 1.14
sys/dev/pci/ixgbe/ixgbe_phy.c 1.21
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.26
- Fix IXGBE_LE32_TO_CPUS() macro for big endian machine. This problem
was only on X550.
- Add debug printf()s.
- Use unsigned to avoid undefined behavior in
ixgbe_fc_enable_generic().
- Modify a little to reduce diff between ixgbe.c and ixv.c.
No functional change.
- Modify comment.
- Remove unused macros.
- Whitespace fix.
- Fix typos.
|
| 1.12.8.4 |
| 26-Sep-2019 |
martin | Pull up the following revisions, requested by msaitoh in ticket #1389:
sys/dev/pci/ixgbe/ixgbe_type.h 1.42-1.43
sys/dev/pci/ixgbe/ixgbe.c 1.209-1.213 via patch
sys/dev/pci/ixgbe/ixv.c 1.131-1.138 via patch
sys/dev/pci/ixgbe/ixgbe_vf.c 1.19-1.22
sys/dev/pci/ixgbe/ixgbe_vf.h 1.14
sys/dev/pci/ixgbe/ixgbe.h 1.57-1.58 via patch
share/man/man4/ixv.4 1.5 via patch
- Fix a bug that MBSDC (Bad SFD Count) isn't counted on X550EM_X and
X550EM_A. The register is for X550 and newer.
- ixv(4): Make SIOCADDMULTI returns ENOSPC and print error message
when the Ethernet multicast address list exceeds the limit(30) and
can't be ALLMULTI.
- ixv(4): SIOCZIFDATA clear the event counters as ixgbe.c.
- Reduce ixv(4)'s multicast table array size in ixv_set_multi from
MAX_NUM_MULTICAST_ADDRESSES(128) to IXGBE_MAX_VF_MC(30).
- ixv(4): Add support ALLMULTI and PROMISC.
- if_flags is neither int nor short. It's unsigned short.
- Fix a bug that the multicast filter isn't correctly initialized when
the total number of the Ethernet multicast addresses is just 128.
- Make ixv_set_multi() work correctly (especially for PROMISC) when the
function is called from if_init().
- Remove *_set_promisc() and use *_set_multi(). And then, rename
*_set_multi() to *_set_rxfilter().
- ixv(4): If a multicast entry has range, use ALLMULTI like others.
|
| 1.12.8.3 |
| 22-Jul-2019 |
martin | Pull up the following revisions (via patch), requested by msaitoh in
ticket #1301:
sys/dev/pci/ixgbe/if_sriov.c 1.5-1.6
sys/dev/pci/ixgbe/ix_txrx.c 1.53-1.54
sys/dev/pci/ixgbe/ixgbe_x550.h 1.5
sys/dev/pci/ixgbe/ixgbe.c 1.169-1.170,1.176,1.179,1.181,1.185-1.186,1.188-1.192 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.53,1.55
sys/dev/pci/ixgbe/ixgbe_82599.c 1.21
sys/dev/pci/ixgbe/ixgbe_api.c 1.22-1.23
sys/dev/pci/ixgbe/ixgbe_api.h 1.14-1.15
sys/dev/pci/ixgbe/ixgbe_x550.c 1.14-1.15
sys/dev/pci/ixgbe/ixgbe_common.c 1.23
sys/dev/pci/ixgbe/ixgbe_common.h 1.14
sys/dev/pci/ixgbe/ixgbe_mbx.c 1.11
sys/dev/pci/ixgbe/ixgbe_mbx.h 1.14
sys/dev/pci/ixgbe/ixgbe_netmap.c 1.2
sys/dev/pci/ixgbe/ixgbe_features.h 1.2
sys/dev/pci/ixgbe/ixgbe_netbsd.c 1.9
sys/dev/pci/ixgbe/ixgbe_netbsd.h 1.9-1.10
sys/dev/pci/ixgbe/ixgbe_phy.c 1.18
sys/dev/pci/ixgbe/ixgbe_type.h 1.37,1.39-1.40
sys/dev/pci/ixgbe/ixgbe_vf.c 1.18
sys/dev/pci/ixgbe/ixv.c 1.112-1.114,1.117,1.119 via patch
Sync ixgbe up to 20190717 except ETHERCAP or ixv's VLAN stuff:
- Add firmware recovery mode for X550, X550A(Xeon D) and X550EM(C3000).
- Remove IXGBE_DEV_ID_82599_LS(0x154f) support again.
- On X550EMU, use ixgbe_identify_sfp_module_X550em() instead of
ixgbe_identify_module_generic(). ixgbe_identify_sfp_module_X550em()
has extra check (e.g. exclude 1G copper).
- It's not required to calculate unused queues' statistics.
- Remove ETHERCAP_VLAN_HWFILTER's definition.
- Match 82598_BX(0x1508), 82599_KR(0x1517), 82599_SFP_EM(0x1507),
X550EM_X_XFI(0x15b0), X550EM_A_QSFP(0x15ca) and
X550EM_A_QSFP_N(0x15cc)
- Add missing XFI support into ixgbe_get_link_capabilities_X550em().
- Other than IXGBE_VF_RESET should wait ACK, so use
ixgbevf_write_msg_read_ack() instead of write_posted() in
ixgbe_update_mc_addr_list_vf().
- When ixv_check_link() failed in the watchdog function, reset the
interface.
- Remove RXCSUM register modification in
ixv_initialize_receive_units(). It seems it's not required.
- Remove some debug printf in ixv_print_debug_info().
- Calculate vector's bit location correctly when the vector >= 31
in ixgbe_allocate_msix().
- Fix hung queue check when the queue number >= 31.
- On ENETRESET case, not continue and quit the ifflags_cb() function
because if_init() will do the same thing.
- Fix bugs in unused code.
- Fix typo in comment.
- Fix typo in unused code.
- Whitespace fixes. KNF.
|
| 1.12.8.2 |
| 14-Apr-2018 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #750):
sys/dev/pci/ixgbe/ixgbe_x540.h: revision 1.8
sys/dev/pci/ixgbe/ixgbe_82598.c: revision 1.11
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c: revision 1.6
sys/dev/pci/ixgbe/ixgbe_82598.c: revision 1.12
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c: revision 1.7
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h: revision 1.6
sys/dev/pci/ixgbe/ixgbe_fdir.h: revision 1.2
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h: revision 1.6
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c: revision 1.6
sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.18
sys/dev/pci/ixgbe/if_sriov.c: revision 1.3
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c: revision 1.7
sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.19
sys/dev/pci/ixgbe/ixgbe_mbx.h: revision 1.13
sys/dev/pci/ixgbe/ixgbe_dcb.c: revision 1.7
sys/dev/pci/ixgbe/ixgbe_api.c: revision 1.19
sys/dev/pci/ixgbe/ixgbe_vf.c: revision 1.16
sys/dev/pci/ixgbe/ixgbe_dcb.c: revision 1.8
sys/dev/pci/ixgbe/ixgbe_vf.c: revision 1.17
sys/dev/pci/ixgbe/ixgbe_dcb.h: revision 1.6
sys/dev/pci/ixgbe/if_bypass.c: revision 1.4
sys/dev/pci/ixgbe/ixv.c: revision 1.91
sys/dev/pci/ixgbe/ixgbe_rss.h: revision 1.4
sys/dev/pci/ixgbe/ixv.c: revision 1.92
sys/dev/pci/ixgbe/ixv.c: revision 1.93
sys/dev/pci/ixgbe/ixgbe_osdep.c: revision 1.4
sys/dev/pci/ixgbe/ixgbe_common.h: revision 1.12
sys/dev/pci/ixgbe/ixgbe_common.h: revision 1.13
sys/dev/pci/ixgbe/ixgbe_api.h: revision 1.13
sys/dev/pci/ixgbe/ixgbe_x550.c: revision 1.12
sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.33
sys/dev/pci/ixgbe/if_fdir.c: revision 1.2
sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.34
sys/dev/pci/ixgbe/ix_txrx.c: revision 1.39
sys/dev/pci/ixgbe/ixgbe_vf.h: revision 1.13
sys/dev/pci/ixgbe/ixgbe_api.c: revision 1.20
sys/dev/pci/ixgbe/ixgbe_sriov.h: revision 1.3
sys/dev/pci/ixgbe/ixgbe_common.c: revision 1.21
sys/dev/pci/ixgbe/ixgbe_osdep.h: revision 1.21
sys/dev/pci/ixgbe/ixgbe_common.c: revision 1.22
sys/dev/pci/ixgbe/ixgbe_82599.h: revision 1.7
sys/dev/pci/ixgbe/ixgbe.c: revision 1.144
sys/dev/pci/ixgbe/ixgbe.c: revision 1.145
sys/dev/pci/ixgbe/ixgbe_phy.c: revision 1.16
sys/dev/pci/ixgbe/ixgbe.c: revision 1.146
sys/dev/pci/ixgbe/ixgbe_phy.c: revision 1.17
sys/dev/pci/ixgbe/ixgbe_82598.h: revision 1.8
sys/dev/pci/ixgbe/ixgbe.h: revision 1.41
sys/dev/pci/ixgbe/ixgbe_mbx.c: revision 1.10
sys/dev/pci/ixgbe/ixgbe_x540.c: revision 1.14
sys/dev/pci/ixgbe/ixgbe_x540.c: revision 1.15
sys/dev/pci/ixgbe/ixgbe_phy.h: revision 1.11
Sync with the remaining part of FreeBSD r328265 except sfp_reinit stuff:
- Always schedule module intterrupt in ixgbe_config_link() when a device is
SFP+ based.
- Use not loop index but txr->me in ixv_initialize_{transmit,receive}_units().
It's required for VMDQ but NetBSD doesn't use it, so it's not a bug in
NetBSD.
- Simplify ixgbe_bp_wd_set(). No functional change.
- Whitespace.
Sync with FreeBSD r331224 except ixv_if_update_admin_status()'s change:
- Fix length of reading buffer when the command is Read Flash in
ixgbe_host_interface_command().
- Add missing start_hw() call in ixv_init_locked(). This is not a real bug
because start_hw just set hw->adapter_stopped to false and anyone refer it.
- Style change.
- Update comment.
Read sc_if_flags after taking core lock. Same as if_wm.c rev. 1.418.
|
| 1.12.8.1 |
| 21-Dec-2017 |
snj | Pull up following revision(s) (requested by msaitoh in ticket #441):
sys/dev/pci/files.pci: 1.390
sys/dev/pci/ixgbe/if_bypass.c: new
sys/dev/pci/ixgbe/if_fdir.c: new
sys/dev/pci/ixgbe/if_sriov.c: new
sys/dev/pci/ixgbe/ixgbe_bypass.h: new
sys/dev/pci/ixgbe/ixgbe_fdir.h: new
sys/dev/pci/ixgbe/ixgbe_features.h: new
sys/dev/pci/ixgbe/ixgbe_netmap.c: new
sys/dev/pci/ixgbe/ixgbe_netmap.h: new
sys/dev/pci/ixgbe/ixgbe_rss.h: new
sys/dev/pci/ixgbe/ixgbe_sriov.h: new
sys/dev/pci/ixgbe/ix_txrx.c: 1.28, 1.30 via patch
sys/dev/pci/ixgbe/ixgbe.c: 1.97-1.105, 1.107-1.111, 1.113-1.115
sys/dev/pci/ixgbe/ixgbe.h: 1.26-1.29 via patch
sys/dev/pci/ixgbe/ixv.c: 1.57-1.58, 1.60-1.61, 1.63-1.64, 1.66-1.72, 1.75 via patch
sys/dev/pci/ixgbe/ixgbe_api.c: 1.17-1.18 via patch
sys/dev/pci/ixgbe/ixgbe_type.h: 1.26-1.30 via patch
sys/dev/pci/ixgbe/ixgbe_82598.c: 1.9-1.10 via patch
sys/dev/pci/ixgbe/ixgbe_82598.h: 1.6-1.7
sys/dev/pci/ixgbe/ixgbe_82599.c: 1.15-1.16 via patch
sys/dev/pci/ixgbe/ixgbe_82599.h: 1.5-1.6
sys/dev/pci/ixgbe/ixgbe_api.h: 1.10-1.11 via patch
sys/dev/pci/ixgbe/ixgbe_common.c: 1.14-1.16 via patch
sys/dev/pci/ixgbe/ixgbe_common.h: 1.8-1.9 via patch
sys/dev/pci/ixgbe/ixgbe_dcb.c: 1.5-1.6
sys/dev/pci/ixgbe/ixgbe_dcb.h: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_mbx.c: 1.7-1.9 via patch
sys/dev/pci/ixgbe/ixgbe_mbx.h: 1.11-1.12 via patch
sys/dev/pci/ixgbe/ixgbe_osdep.c: 1.2
sys/dev/pci/ixgbe/ixgbe_osdep.h: 1.18-1.19 via patch
sys/dev/pci/ixgbe/ixgbe_phy.c: 1.12-1.14 via patch
sys/dev/pci/ixgbe/ixgbe_phy.h: 1.9-1.10 via patch
sys/dev/pci/ixgbe/ixgbe_vf.c: 1.13-1.15 via patch
sys/dev/pci/ixgbe/ixgbe_vf.h: 1.9-1.11 via patch
sys/dev/pci/ixgbe/ixgbe_x540.c: 1.10-1.12
sys/dev/pci/ixgbe/ixgbe_x540.h: 1.6-1.7
sys/dev/pci/ixgbe/ixgbe_x550.c: 1.6-1.7
sys/dev/pci/ixgbe/ixgbe_x550.h: 1.3
Sync with FreeBSD's up to r326022, fix bugs and some improvements:
- Don't limit number of queue pair to 8. Take chip's max TX queues and
max RX queues into account.
- Add C3000 (Denverton) support.
- Add bypass function support for bypass adapters.
- Change EEE sysctl.
- Remove thermal test sysctl.
- ixv(4): set RSS mapping.
- ixv(4): Add TSOv6.
- ixv(4): Fix hardware counter.
- ixv(4): Make TX/RX descriptors size the same as ixg(4).
- ixv(4): Print device name in ixv_attach().
- ixv(4): Make mailbox statistic counters evcnt(9).
- ixv(4): Fix a problem that mailbox interrupt never occurred.
- ixv(4): Don't check neither VTEICR nor VTEICS same as Linux. It
seems that both registers can't be used to check which MSI-X vector
is triggered.
- ixv(4): Print Mailbox API version.
- Print driver feature capabilities and enable bits when verbose boot.
- Fix a bug that X550EM_A (Denverton) can't force 10BaseT.
- Remove all half-duplex setting because of the chip specification.
- Add 2.5GBASE-T and 5GBASE-T support.
- Set ifm_baudrate correctly.
- Protect ec_multi* with mutex like other MP safe Ethernet drivers.
- On X550 and newer, print NVM Image Version with %u.%02x.
- On X540, print PHY FW Revision with %u.%x. 0x4030 will be printed
as "Revision 4.3 ID 0x0"
- Fix value check of OEM_NVM_IMAGE_VER.
- Print PHY ID only for copper PHY.
- Fix a bug that X550 and newer didn't linkup if it forces
100BaseTX-FDX or 10BaseT-FDX.
- Fix a bug that RX may accesses freed area. It also fixes a problem
that if_init() takes long time on many core machine.
- Check ETHERCAP_VLAN_HWTAGGING in ixgbe_setup_vlan_hw_support(). This
change has no influence to netbsd because it's enabled by default
and NetBSD has no API to disable it.
- Whitespace fix.
|
| 1.15.2.1 |
| 07-Apr-2018 |
pgoyette | Sync with HEAD. 77 conflicts resolved - all of them $NetBSD$
|
| 1.17.2.1 |
| 13-Apr-2020 |
martin | Mostly merge changes from HEAD upto 20200411
|
| 1.18.2.7 |
| 08-Oct-2023 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #1745):
sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.30
sys/dev/pci/ixgbe/ixv.c: revision 1.184
sys/dev/pci/ixgbe/ixv.c: revision 1.185
sys/dev/pci/ixgbe/ixgbe_vf.c: revision 1.32
sys/dev/pci/ixgbe/ixgbe_vf.c: revision 1.33
sys/dev/pci/ixgbe/ixgbe.h: revision 1.87
sys/dev/pci/ixgbe/ixgbe.h: revision 1.88
sys/dev/pci/ixgbe/ixgbe.c: revision 1.330
sys/dev/pci/ixgbe/ixgbe.c: revision 1.331
sys/dev/pci/ixgbe/ixgbe.c: revision 1.332
sys/dev/pci/ixgbe/ixgbe_vf.h: revision 1.18
sys/dev/pci/ixgbe/ix_txrx.c: revision 1.101
sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.57
sys/dev/pci/ixgbe/ixgbe_mbx.h: revision 1.20
sys/dev/pci/ixgbe/ixgbe.c: revision 1.327
sys/dev/pci/ixgbe/ixgbe.c: revision 1.328
sys/dev/pci/ixgbe/ixgbe.c: revision 1.329
ixgbe: Reorder some event counters for readability.
ixg(4): Rename some descriptions of event counters.
- Rename some descriptions from register name to the meaning.
- For the same meaning's counters, add "(soft)" or "(reg)".
The former is for a software level counter and the latter is for a
statistics counter register based.
ixg(4): Count Queue Bytes {Transmit, Receive} counter.
ixg(4): Reorder some flow control related event counters for readability.
ixg(4): Rename some descriptions of flow control related event conters.
Remove obsolete comment.
ixgbe: Fix typo in comment. No functional change.
ixv(4): Improve error check.
ixgbe_vf.c rev. 1.31 changed the behavior of the ixgbe_check_mac_link_vf()
function. It was from FreeBSD's ixv-1.5.25 to resolve mailbox collision
problem. The change had a problem that error checks have not done at all if
the API version >= 1.5. Fix it. From FreeBSD ixv-1.5.27.
ixv(4): Add new IXGBE_VF_GET_LINK_STATE message support.
PF can control vf's link state by this change. Note that Linux's PF driver
can't control the link to force up (i.e. ip link set XXX vf Y state enable).
From FreeBSD ixv-1.5.30.
ixg(4): Update FCTRL after writing multicast filter. Same as other OSes.
From FreeBSD 395cc55d896654b8f75071e71e856b22aed87da5.
|
| 1.18.2.6 |
| 31-Jan-2022 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #1416):
sys/dev/pci/ixgbe/ixgbe_mbx.h: revision 1.19
sys/dev/pci/ixgbe/ixgbe_vf.c: revision 1.31
sys/dev/pci/ixgbe/ixgbe_x540.c: revision 1.23
sys/dev/pci/ixgbe/if_sriov.c: revision 1.17
sys/dev/pci/ixgbe/ixv.c: revision 1.172
sys/dev/pci/ixgbe/ixv.c: revision 1.173
sys/dev/pci/ixgbe/ixgbe.c: revision 1.301
sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.55
sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.29
sys/dev/pci/ixgbe/ixgbe_mbx.c: revision 1.16
sys/dev/pci/ixgbe/ixgbe_mbx.c: revision 1.17
sys/dev/pci/ixgbe/ixgbe_mbx.c: revision 1.18
Add code to support API version 1.5. No functional change.
- This change adds almost all code to support API 1.5 except real negotiation
and upgrade mailbox functions.
- From ix-3.3.18, ix-3.3.22 and ixv-1.5.24.
Enable mailbox API 1.5 support. Tested on ESXi with ixgben 1.10.3.0.
Don't clear mailbox related counters in ixgbe_upgrade_mbx_params_vf().
Don't clear mailbox related counters in ixgbe_upgrade_mbx_params_pf().
|
| 1.18.2.5 |
| 30-Jan-2022 |
martin | Pull up the following revisions, requested by msaitoh in ticket #1414:
sys/dev/pci/ixgbe/if_sriov.c 1.12-1.16
sys/dev/pci/ixgbe/ixgbe.c 1.295-1.297,1.300,1.304 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.84
sys/dev/pci/ixgbe/ixgbe_82598.c 1.17-1.18
sys/dev/pci/ixgbe/ixgbe_82598.h 1.9
sys/dev/pci/ixgbe/ixgbe_82599.c 1.24-1.28
sys/dev/pci/ixgbe/ixgbe_82599.h 1.8
sys/dev/pci/ixgbe/ixgbe_api.c 1.26-1.27
sys/dev/pci/ixgbe/ixgbe_api.h 1.16
sys/dev/pci/ixgbe/ixgbe_bypass.h 1.3
sys/dev/pci/ixgbe/ixgbe_common.c 1.34-1.42
sys/dev/pci/ixgbe/ixgbe_common.h 1.15-1.16
sys/dev/pci/ixgbe/ixgbe_dcb.c 1.12-1.13
sys/dev/pci/ixgbe/ixgbe_dcb.h 1.8-1.9
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c 1.10-1.12
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h 1.8
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c 1.10-1.11
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h 1.8
sys/dev/pci/ixgbe/ixgbe_fdir.h 1.4
sys/dev/pci/ixgbe/ixgbe_features.h 1.4
sys/dev/pci/ixgbe/ixgbe_mbx.c 1.13-1.15
sys/dev/pci/ixgbe/ixgbe_mbx.h 1.15-1.18
sys/dev/pci/ixgbe/ixgbe_netmap.c 1.5
sys/dev/pci/ixgbe/ixgbe_osdep.c 1.8
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.31
sys/dev/pci/ixgbe/ixgbe_phy.c 1.25-1.29
sys/dev/pci/ixgbe/ixgbe_phy.h 1.13
sys/dev/pci/ixgbe/ixgbe_rss.h 1.6
sys/dev/pci/ixgbe/ixgbe_sriov.h 1.5
sys/dev/pci/ixgbe/ixgbe_type.h 1.51-1.54
sys/dev/pci/ixgbe/ixgbe_vf.c 1.28-1.29
sys/dev/pci/ixgbe/ixgbe_vf.h 1.15
sys/dev/pci/ixgbe/ixgbe_x540.c 1.20-1.22
sys/dev/pci/ixgbe/ixgbe_x540.h 1.10
sys/dev/pci/ixgbe/ixgbe_x550.c 1.21-1.25
sys/dev/pci/ixgbe/ixgbe_x550.h 1.7
sys/dev/pci/ixgbe/ixv.c 1.170, 1.174-1.175 via patch
- Add typecast for type mismatch.
- Fix retry count calculation of I2C read/write.
- Wait longer for link after fiber MAC setup.
- ixv(4): Use adapter->mta for the multicast array memory instead of
the on-stack array.
- Match X550_PHY_ID correctly on X550.
- Print NVM image version on 82598.
- Use 64bit for lxon + lxoff.
- Don't expose garbage data of hw.ixvN.debug.
- Some NetBSD unrelated changes:
- Fix infinite recursion on PCIe link down if VMDQ is used.
- Move PF mailbox initialization from ixgbe_attach() to
ixgbe_init_iov().
- Add IPv6 mask for flow director.
- Change error level in ixgbe_fc_autoneg().
- Check host interface return status when writing NVM.
- Change DCB credit parameters.
- Restore some mailbox related functions. Revert part of ixgbe_mbx.c
rev. 1.7 and ixgbe_mbx.h rev. 1.11. No functional change.
- Rename IXGBE_VT_MSGTYPE_{ACK,NACK} to
IXGBE_VT_MSGTYPE_{SUCCESS,FAILURE}. No functional change.
- Remove unused argument. Change argument.
- Remove unnecessary return value check.
- Remove debug error message.
- Remove dead code.
- Add some unused macros.
- Fix typo in comment.
- Rename some functions.
- Sort lines, modify comment.
- Whitespace fix.
|
| 1.18.2.4 |
| 15-Sep-2021 |
martin | Pull up the following (via patch), requested by msaitoh in ticket #1346:
sys/dev/pci/ixgbe/ixgbe.c 1.252, 1.280-1.283, 1.286-1.287, 1.289-1.290 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.73, 1.76-1.80 via patch
sys/dev/pci/ixgbe/ix_txrx.c 1.68-1.93
sys/dev/pci/ixgbe/ixv.c 1.153, 1.157-1.161, 1.163-1.166 via patch
sys/dev/pci/ixgbe/if_bypass.c 1.7-1.9
sys/dev/pci/ixgbe/if_fdir.c 1.4-1.5
sys/dev/pci/ixgbe/if_sriov.c 1.10-1.11
sys/dev/pci/ixgbe/ixgbe_82598.c 1.16
sys/dev/pci/ixgbe/ixgbe_82599.c 1.23
sys/dev/pci/ixgbe/ixgbe_api.c 1.25
sys/dev/pci/ixgbe/ixgbe_bypass.h 1.2
sys/dev/pci/ixgbe/ixgbe_common.c 1.30-1.33
sys/dev/pci/ixgbe/ixgbe_dcb.c 1.10-1.11
sys/dev/pci/ixgbe/ixgbe_dcb.h 1.7
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c 1.8-1.9
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h 1.7
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c 1.8-1.9
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h 1.7
sys/dev/pci/ixgbe/ixgbe_fdir.h 1.3
sys/dev/pci/ixgbe/ixgbe_features.h 1.3
sys/dev/pci/ixgbe/ixgbe_mbx.c 1.12
sys/dev/pci/ixgbe/ixgbe_netbsd.c 1.13, 1.16-1.17
sys/dev/pci/ixgbe/ixgbe_netbsd.h 1.13-1.14
sys/dev/pci/ixgbe/ixgbe_netmap.c 1.3-1.4
sys/dev/pci/ixgbe/ixgbe_netmap.h 1.2
sys/dev/pci/ixgbe/ixgbe_osdep.c 1.7
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.29-1.30
sys/dev/pci/ixgbe/ixgbe_phy.c 1.24
sys/dev/pci/ixgbe/ixgbe_rss.h 1.5
sys/dev/pci/ixgbe/ixgbe_sriov.h 1.4
sys/dev/pci/ixgbe/ixgbe_type.h 1.49
sys/dev/pci/ixgbe/ixgbe_vf.c 1.27
sys/dev/pci/ixgbe/ixgbe_x540.c 1.18-1.19
sys/dev/pci/ixgbe/ixgbe_x540.h 1.9
sys/dev/pci/ixgbe/ixgbe_x550.c 1.19-1.20
sys/dev/pci/ixgbe/ixgbe_x550.h 1.6
sys/dev/pci/files.pci 1.438
share/man/man4/ixg.4 1.15
share/man/man4/ixv.4 1.8
- Use MCLGET() instead of homegrown cluster (jcl) allocation mechanism.
Before this commit, resource shortage was easily occurred because
the total number of the clusters is small.
- Improve performance:
- Use m_adj(ETHER_ALIGN) more.
- Sprinkle __predict_false() in the RX path.
- Don't pre-allocate a cluster for RXCOPY case to improve short
packet's performance.
- Call bus_dmamap_unload(9) via ixgbe_dmamap_unload(), before freeing
DMA buffer. Also, when the buffer is already freed, do not call
bus_dmamap_unload(9) (no resource leaks with this change). This
change is required to make ixg(4) work on alpha.
- Keep m_len and m_pkthdr.len consistent to prevent panic on arm.
- Fix panic when bus_dmamap_load_mbuf() failed in
ixgbe_setup_receive_ring().
- Added BUS_DMA_COHERENT flag to bus_dmamem_map() to improve stability
on aarch64.
- Use uint64_t instead of bus_addr_t for the TX descriptor's buffer
address. At least, this change is required for macppc
(sizeof(bus_addr_t) == 4) to make TX work.
- Fix little-endian dependence.
- Set rxr->next_to_refresh correctly in ixgbe_setup_receive_ring().
- Refresh unrefreshed descriptors' buffers correctly.
- Don't call bus_dmamap_sync with rx_mbuf_sz(== MCLBYTES) to prevent
panic.
- Save the discard_multidesc state to not to forget the state by
exiting rxeof().
- Add missing increment of no_mbuf error counter.
- Don't increment no_mbuf evcnt(9) when discarding multi-descriptor
packet.
- ixv: Modify error message to sync with ixgbe.c
- Print the error value of ixgbe_reset_hw() for debugging.
- Remove extra unlock/lock processing around if_percpuq_enqueue().
- Refactor rxr->next_to_check updating.
- Add new sysctl "rx_copy_len".
- Add a new sysctl to read rxr->next_to_refresh.
- Print error number when error occurred.
- Rename ix{gbe,v}_stop() with ix{gbe,v}_stop_locked(). No functional
change.
- Don't use fixed value.
- Comment out flow director processing in fast path.
- Add missing NetBSD RCS IDs and __KERNEL_RCSID()s.
- KNF.
- Fix typos.
|
| 1.18.2.3 |
| 11-Mar-2021 |
martin | Pull up the following (all via patch) requested by msaitoh in ticket #1231:
sys/dev/pci/ixgbe/ixgbe.c 1.259, 1.278-1.279
sys/dev/pci/ixgbe/ixgbe.h 1.75
sys/dev/pci/ixgbe/ixgbe_netbsd.h 1.12
sys/dev/pci/ixgbe/ixgbe_vf.c 1.24-1.26
sys/dev/pci/ixgbe/ixgbe_x550.c 1.17
sys/dev/pci/ixgbe/ixv.c 1.155-1.156
sys/dev/pci/ixgbe/ix_txrx.c 1.64-67
sys/dev/pci/files.pci 1.436
share/man/man4/ixg.4 1.13-1.14
share/man/man4/ixv.4 1.6-1.7
- Fix a problem that the RX path stalled when the mbuf cluster is
exhausted.
- Modify some parameters to reduce packet dropping. See also the
manual's OPTIONS section for the detail.
- ixv(4): The max number of queue(pair) is not 7 but 8. Correctly
reset the hardware.
- Add "TX " to "Queue No Descriptor Available" evcnt(9) name to make
it more understandable.
- Fix a bug that some advertise speeds can't be set with
hw.ixgN.advertise_speed if both 2.5G and 5G are set. Fix the error
message, too.
- Fix typo in comment or debug message.
|
| 1.18.2.2 |
| 10-Jul-2020 |
martin | Pull up the following revisions, requested by msaitoh in ticket #997:
sys/dev/pci/ixgbe/ix_txrx.c 1.62-1.63 via patch
sys/dev/pci/ixgbe/ixgbe.c 1.225, 1.228-1.229,
1.232 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.64, 1.66
sys/dev/pci/ixgbe/ixv.c 1.146, 1.148-1.150
sys/dev/pci/ixgbe/ixgbe_common.c 1.27
sys/dev/pci/ixgbe/ixgbe_vf.c 1.23
sys/dev/pci/ixgbe/ixgbe_82598.c 1.15
sys/dev/pci/ixgbe/ixgbe_x550.c 1.18
sys/dev/pci/ixgbe/ixgbe_netbsd.c 1.14
sys/dev/pci/ixgbe/ixgbe_phy.c 1.21
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.26
- Fix IXGBE_LE32_TO_CPUS() macro for big endian machine. This problem
was only on X550*.
- Add debug printf()s.
- Use unsigned to avoid undefined behavior in
ixgbe_fc_enable_generic().
- Modify a little to reduce diff between ixgbe.c and ixv.c.
No functional change.
- Modify comment.
- Remove unused macros.
- Whitespace fix.
- Fix typos.
|
| 1.18.2.1 |
| 26-Sep-2019 |
martin | Pull up the following revisions, requested by msaitoh in ticket #246:
sys/dev/pci/ixgbe/ixgbe_type.h 1.42-1.43
sys/dev/pci/ixgbe/ixgbe.c 1.209-1.213
sys/dev/pci/ixgbe/ixgbe_x550.c 1.16
sys/dev/pci/ixgbe/ixv.c 1.131-1.138
sys/dev/pci/ixgbe/ixgbe_vf.c 1.19-1.22
sys/dev/pci/ixgbe/ixgbe_vf.h 1.14
sys/dev/pci/ixgbe/ixgbe.h 1.57-1.58
share/man/man4/ixv.4 1.5
- Fix a bug that MBSDC (Bad SFD Count) isn't counted on X550EM_X and
X550EM_A. The register is for X550 and newer.
- ixv(4): Make SIOCADDMULTI returns ENOSPC and print error message
when the Ethernet multicast address list exceeds the limit(30) and
can't be ALLMULTI.
- ixv(4): SIOCZIFDATA clear the event counters as ixgbe.c.
- Reduce ixv(4)'s multicast table array size in ixv_set_multi from
MAX_NUM_MULTICAST_ADDRESSES(128) to IXGBE_MAX_VF_MC(30).
- ixv(4): Add support ALLMULTI and PROMISC.
- if_flags is neither int nor short. It's unsigned short.
- ixg(4): Fix a bug that the multicast filter isn't correctly
initialized when the total number of the Ethernet multicast
addresses is just 128.
- Make ixv_set_multi() work correctly (especially for PROMISC) when the
function is called from if_init().
- Remove *_set_promisc() and use *_set_multi(). And then, rename
*_set_multi() to *_set_rxfilter().
- ixv(4): If a multicast entry has range, use ALLMULTI like others.
- Fix typo in comment. Found by Wataru Ashihara.
|
| 1.22.2.1 |
| 29-Feb-2020 |
ad | Sync with head.
|
| 1.24.2.2 |
| 03-Apr-2021 |
thorpej | Sync with HEAD.
|
| 1.24.2.1 |
| 14-Dec-2020 |
thorpej | Sync w/ HEAD.
|
| 1.26.4.1 |
| 13-May-2021 |
thorpej | Sync with HEAD.
|
| 1.31.4.1 |
| 08-Oct-2023 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #395):
sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.30
sys/dev/pci/ixgbe/ixv.c: revision 1.184
sys/dev/pci/ixgbe/ixv.c: revision 1.185
sys/dev/pci/ixgbe/ixgbe_vf.c: revision 1.32
sys/dev/pci/ixgbe/ixgbe_vf.c: revision 1.33
sys/dev/pci/ixgbe/ixgbe.h: revision 1.87
sys/dev/pci/ixgbe/ixgbe.h: revision 1.88
sys/dev/pci/ixgbe/ixgbe.c: revision 1.330
sys/dev/pci/ixgbe/ixgbe.c: revision 1.331
sys/dev/pci/ixgbe/ixgbe.c: revision 1.332
sys/dev/pci/ixgbe/ixgbe_vf.h: revision 1.18
sys/dev/pci/ixgbe/ix_txrx.c: revision 1.101
sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.57
sys/dev/pci/ixgbe/ixgbe_mbx.h: revision 1.20
sys/dev/pci/ixgbe/ixgbe.c: revision 1.327
sys/dev/pci/ixgbe/ixgbe.c: revision 1.328
sys/dev/pci/ixgbe/ixgbe.c: revision 1.329
ixgbe: Reorder some event counters for readability.
ixg(4): Rename some descriptions of event counters.
- Rename some descriptions from register name to the meaning.
- For the same meaning's counters, add "(soft)" or "(reg)".
The former is for a software level counter and the latter is for a
statistics counter register based.
ixg(4): Count Queue Bytes {Transmit, Receive} counter.
ixg(4): Reorder some flow control related event counters for readability.
ixg(4): Rename some descriptions of flow control related event conters.
Remove obsolete comment.
ixgbe: Fix typo in comment. No functional change.
ixv(4): Improve error check.
ixgbe_vf.c rev. 1.31 changed the behavior of the ixgbe_check_mac_link_vf()
function. It was from FreeBSD's ixv-1.5.25 to resolve mailbox collision
problem. The change had a problem that error checks have not done at all if
the API version >= 1.5. Fix it. From FreeBSD ixv-1.5.27.
ixv(4): Add new IXGBE_VF_GET_LINK_STATE message support.
PF can control vf's link state by this change. Note that Linux's PF driver
can't control the link to force up (i.e. ip link set XXX vf Y state enable).
From FreeBSD ixv-1.5.30.
ixg(4): Update FCTRL after writing multicast filter. Same as other OSes.
From FreeBSD 395cc55d896654b8f75071e71e856b22aed87da5.
|
