| History log of /src/sys/arch/macppc/dev/if_bm.c |
| Revision | | Date | Author | Comments |
| 1.66 |
| 04-Oct-2025 |
thorpej | Add a shared function to query the common properties used for configuring
an Ethernet address.
|
| 1.65 |
| 18-Sep-2022 |
thorpej | Eliminate use of IFF_OACTIVE.
|
| 1.64 |
| 05-Mar-2021 |
rin | Convert to intr_establish_xname().
|
| 1.63 |
| 04-Feb-2020 |
martin | branches: 1.63.6;
Convert a few more drivers to the if_stats interface
|
| 1.62 |
| 04-Feb-2020 |
skrll | Adopt <net/if_stats.h>
|
| 1.61 |
| 10-Nov-2019 |
chs | branches: 1.61.2;
in many device attach paths, allocate memory with M_WAITOK instead of M_NOWAIT
and remove code to handle failures that can no longer happen.
|
| 1.60 |
| 28-May-2019 |
msaitoh | Use ETHER_LOCK()/ETHER_UNLOCK() for all ethernet drivers to protect ec_multi*.
|
| 1.59 |
| 23-May-2019 |
msaitoh | -No functional change:
- KNF
- u_int*_t -> uint*_t.
|
| 1.58 |
| 22-Apr-2019 |
msaitoh | These drivers do ether_ioctl() on SIOC{ADD,DEL}MULTI, SIOC{G,S}IFMEDIA and
default case in the switch statement. Only the default case didn't check the
return value with ENETRESET. Integrate them to one ether_ioctl() with
ENETRESET test. This change might improve SIOCSIFMTU or some other ioctl()s
which return ENETRESET by calling if_init().
|
| 1.57 |
| 05-Feb-2019 |
msaitoh | Remove very old IFF_NOTRAILERS flag.
|
| 1.56 |
| 22-Jan-2019 |
msaitoh | Change MII PHY read/write API from:
int (*mii_readreg_t)(device_t, int, int);
void (*mii_writereg_t)(device_t, int, int, int);
to:
int (*mii_readreg_t)(device_t, int, int, uint16_t *);
int (*mii_writereg_t)(device_t, int, int, uint16_t);
Now we can test if a read/write operation failed or not by the return value.
In 802.3 spec says that the PHY shall not respond to read/write transaction
to the unimplemented register(22.2.4.3). Detecting timeout can be used to
check whether a register is implemented or not (if the register conforms to
the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR.
Note that I noticed that the following code do infinite loop in the
read/wirte function. If it accesses unimplemented PHY register, it will hang.
It should be fixed:
arm/at91/at91emac.c
arm/ep93xx/epe.c
arm/omap/omapl1x_emac.c
mips/ralink/ralink_eth.c
arch/powerpc/booke/dev/pq3etsec.c(read)
dev/cadence/if_cemac.c <- hkenken
dev/ic/lan9118.c
Tested with the following device:
axe+ukphy
axe+rgephy
axen+rgephy (tested by Andrius V)
wm+atphy
wm+ukphy
wm+igphy
wm+ihphy
wm+makphy
sk+makphy
sk+brgphy
sk+gentbi
msk+makphy
sip+icsphy
sip+ukphy
re+rgephy
bge+brgphy
bnx+brgphy
gsip+gphyter
rtk+rlphy
fxp+inphy (tested by Andrius V)
tlp+acphy
ex+exphy
epic+qsphy
vge+ciphy (tested by Andrius V)
vr+ukphy (tested by Andrius V)
vte+ukphy (tested by Andrius V)
Not tested (MAC):
arm:at91emac
arm:cemac
arm:epe
arm:geminigmac
arm:enet
arm:cpsw
arm:emac(omac)
arm:emac(sunxi)
arm:npe
evbppc:temac
macppc:bm
macppc:gm
mips:aumac
mips:ae
mips:cnmac
mips:reth
mips:sbmac
playstation2:smap
powerpc:tsec
powerpc:emac(ibm4xx)
sgimips:mec
sparc:be
sf
ne(ax88190, dl10019)
awge
ep
gem
hme
smsh
mtd
sm
age
alc
ale
bce
cas
et
jme
lii
nfe
pcn
ste
stge
tl
xi
aue
mue
smsc
udav
url
Not tested (PHY):
amhphy
bmtphy
dmphy
etphy
glxtphy
ikphy
iophy
lxtphy
nsphyter
pnaphy
rdcphy
sqphy
tlphy
tqphy
urlphy
|
| 1.55 |
| 03-Sep-2018 |
riastradh | Rename min/max -> uimin/uimax for better honesty.
These functions are defined on unsigned int. The generic name
min/max should not silently truncate to 32 bits on 64-bit systems.
This is purely a name change -- no functional change intended.
HOWEVER! Some subsystems have
#define min(a, b) ((a) < (b) ? (a) : (b))
#define max(a, b) ((a) > (b) ? (a) : (b))
even though our standard name for that is MIN/MAX. Although these
may invite multiple evaluation bugs, these do _not_ cause integer
truncation.
To avoid `fixing' these cases, I first changed the name in libkern,
and then compile-tested every file where min/max occurred in order to
confirm that it failed -- and thus confirm that nothing shadowed
min/max -- before changing it.
I have left a handful of bootloaders that are too annoying to
compile-test, and some dead code:
cobalt ews4800mips hp300 hppa ia64 luna68k vax
acorn32/if_ie.c (not included in any kernels)
macppc/if_gm.c (superseded by gem(4))
It should be easy to fix the fallout once identified -- this way of
doing things fails safe, and the goal here, after all, is to _avoid_
silent integer truncations, not introduce them.
Maybe one day we can reintroduce min/max as type-generic things that
never silently truncate. But we should avoid doing that for a while,
so that existing code has a chance to be detected by the compiler for
conversion to uimin/uimax without changing the semantics until we can
properly audit it all. (Who knows, maybe in some cases integer
truncation is actually intended!)
|
| 1.54 |
| 26-Jun-2018 |
msaitoh | branches: 1.54.2;
Implement the BPF direction filter (BIOC[GS]DIRECTION). It provides backward
compatibility with BIOC[GS]SEESENT ioctl. The userland interface is the same
as FreeBSD.
This change also fixes a bug that the direction is misunderstand on some
environment by passing the direction to bpf_mtap*() instead of checking
m->m_pkthdr.rcvif.
|
| 1.53 |
| 15-Dec-2016 |
ozaki-r | branches: 1.53.14;
Move bpf_mtap and if_ipackets++ on Rx of each driver to percpuq if_input
The benefits of the change are:
- We can reduce codes
- We can provide the same behavior between drivers
- Where/When if_ipackets is counted up
- Note that some drivers still update packet statistics in their own
way (periodical update)
- Moved bpf_mtap run in softint
- This makes it easy to MP-ify bpf
Proposed on tech-kern and tech-net
|
| 1.52 |
| 08-Dec-2016 |
ozaki-r | Apply deferred if_start framework
if_schedule_deferred_start checks if the if_snd queue contains packets,
so drivers don't need to check it by themselves.
|
| 1.51 |
| 03-Oct-2016 |
ozaki-r | Fix typo
|
| 1.50 |
| 02-Oct-2016 |
christos | MFREE -> m_free
|
| 1.49 |
| 15-Jul-2016 |
macallan | adjust to dbdma changes
|
| 1.48 |
| 10-Jun-2016 |
ozaki-r | branches: 1.48.2;
Introduce m_set_rcvif and m_reset_rcvif
The API is used to set (or reset) a received interface of a mbuf.
They are counterpart of m_get_rcvif, which will come in another
commit, hide internal of rcvif operation, and reduce the diff of
the upcoming change.
No functional change.
|
| 1.47 |
| 09-Feb-2016 |
ozaki-r | Introduce softint-based if_input
This change intends to run the whole network stack in softint context
(or normal LWP), not hardware interrupt context. Note that the work is
still incomplete by this change; to that end, we also have to softint-ify
if_link_state_change (and bpf) which can still run in hardware interrupt.
This change softint-ifies at ifp->if_input that is called from
each device driver (and ieee80211_input) to ensure Layer 2 runs
in softint (e.g., ether_input and bridge_input). To this end,
we provide a framework (called percpuq) that utlizes softint(9)
and percpu ifqueues. With this patch, rxintr of most drivers just
queues received packets and schedules a softint, and the softint
dequeues packets and does rest packet processing.
To minimize changes to each driver, percpuq is allocated in struct
ifnet for now and that is initialized by default (in if_attach).
We probably have to move percpuq to softc of each driver, but it's
future work. At this point, only wm(4) has percpuq in its softc
as a reference implementation.
Additional information including performance numbers can be found
in the thread at tech-kern@ and tech-net@:
http://mail-index.netbsd.org/tech-kern/2016/01/14/msg019997.html
Acknowledgment: riastradh@ greatly helped this work.
Thank you very much!
|
| 1.46 |
| 22-Jul-2012 |
matt | branches: 1.46.2; 1.46.16;
Fix mii_statchg to take a 'struct ifnet *' instead of device_t. This fixes
problem with a common MDIO bus used for multiple interfaces.
Some drivers converted to CFATTACL_DECL_NEW.
|
| 1.45 |
| 30-Jun-2011 |
matt | branches: 1.45.2;
Modify mapiodev to take a third argument indicating whether the space
should be prefetchable (true) or not (false).
|
| 1.44 |
| 18-Jun-2011 |
matt | struct device * -> device_t
struct cfdata * -> cfdata_t
use device accessors, use device_private.
some softc/device_t splits (macppc needs a bunch more)
aprint*_dev used considerably more
|
| 1.43 |
| 05-Apr-2010 |
joerg | branches: 1.43.6;
Push the bpf_ops usage back into bpf.h. Push the common ifp->if_bpf
check into the inline functions as well the fourth argument for
bpf_attach.
|
| 1.42 |
| 25-Feb-2010 |
matt | branches: 1.42.2;
Adapt to <spr.h> breakup.
|
| 1.41 |
| 19-Jan-2010 |
pooka | branches: 1.41.2;
Redefine bpf linkage through an always present op vector, i.e.
#if NBPFILTER is no longer required in the client. This change
doesn't yet add support for loading bpf as a module, since drivers
can register before bpf is attached. However, callers of bpf can
now be modularized.
Dynamically loadable bpf could probably be done fairly easily with
coordination from the stub driver and the real driver by registering
attachments in the stub before the real driver is loaded and doing
a handoff. ... and I'm not going to ponder the depths of unload
here.
Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.
|
| 1.40 |
| 14-Mar-2009 |
dsl | ANSIfy another 1261 function definitions.
The only ones left in sys are beyond by sed script!
(or in sys/dist or sys/external)
Mostly they have function pointer parameters.
|
| 1.39 |
| 14-Mar-2009 |
dsl | Change about 4500 of the K&R function definitions to ANSI ones.
There are still about 1600 left, but they have ',' or /* ... */
in the actual variable definitions - which my awk script doesn't handle.
There are also many that need () -> (void).
(The script does handle misordered arguments.)
|
| 1.38 |
| 07-Nov-2008 |
dyoung | branches: 1.38.4;
*** Summary ***
When a link-layer address changes (e.g., ifconfig ex0 link
02:de:ad:be:ef:02 active), send a gratuitous ARP and/or a Neighbor
Advertisement to update the network-/link-layer address bindings
on our LAN peers.
Refuse a change of ethernet address to the address 00:00:00:00:00:00
or to any multicast/broadcast address. (Thanks matt@.)
Reorder ifnet ioctl operations so that driver ioctls may inherit
the functions of their "class"---ether_ioctl(), fddi_ioctl(), et
cetera---and the class ioctls may inherit from the generic ioctl,
ifioctl_common(), but both driver- and class-ioctls may override
the generic behavior. Make network drivers share more code.
Distinguish a "factory" link-layer address from others for the
purposes of both protecting that address from deletion and computing
EUI64.
Return consistent, appropriate error codes from network drivers.
Improve readability. KNF.
*** Details ***
In if_attach(), always initialize the interface ioctl routine,
ifnet->if_ioctl, if the driver has not already initialized it.
Delete if_ioctl == NULL tests everywhere else, because it cannot
happen.
In the ioctl routines of network interfaces, inherit common ioctl
behaviors by calling either ifioctl_common() or whichever ioctl
routine is appropriate for the class of interface---e.g., ether_ioctl()
for ethernets.
Stop (ab)using SIOCSIFADDR and start to use SIOCINITIFADDR. In
the user->kernel interface, SIOCSIFADDR's argument was an ifreq,
but on the protocol->ifnet interface, SIOCSIFADDR's argument was
an ifaddr. That was confusing, and it would work against me as I
make it possible for a network interface to overload most ioctls.
On the protocol->ifnet interface, replace SIOCSIFADDR with
SIOCINITIFADDR. In ifioctl(), return EPERM if userland tries to
invoke SIOCINITIFADDR.
In ifioctl(), give the interface the first shot at handling most
interface ioctls, and give the protocol the second shot, instead
of the other way around. Finally, let compatibility code (COMPAT_OSOCK)
take a shot.
Pull device initialization out of switch statements under
SIOCINITIFADDR. For example, pull ..._init() out of any switch
statement that looks like this:
switch (...->sa_family) {
case ...:
..._init();
...
break;
...
default:
..._init();
...
break;
}
Rewrite many if-else clauses that handle all permutations of IFF_UP
and IFF_RUNNING to use a switch statement,
switch (x & (IFF_UP|IFF_RUNNING)) {
case 0:
...
break;
case IFF_RUNNING:
...
break;
case IFF_UP:
...
break;
case IFF_UP|IFF_RUNNING:
...
break;
}
unifdef lots of code containing #ifdef FreeBSD, #ifdef NetBSD, and
#ifdef SIOCSIFMTU, especially in fwip(4) and in ndis(4).
In ipw(4), remove an if_set_sadl() call that is out of place.
In nfe(4), reuse the jumbo MTU logic in ether_ioctl().
Let ethernets register a callback for setting h/w state such as
promiscuous mode and the multicast filter in accord with a change
in the if_flags: ether_set_ifflags_cb() registers a callback that
returns ENETRESET if the caller should reset the ethernet by calling
if_init(), 0 on success, != 0 on failure. Pull common code from
ex(4), gem(4), nfe(4), sip(4), tlp(4), vge(4) into ether_ioctl(),
and register if_flags callbacks for those drivers.
Return ENOTTY instead of EINVAL for inappropriate ioctls. In
zyd(4), use ENXIO instead of ENOTTY to indicate that the device is
not any longer attached.
Add to if_set_sadl() a boolean 'factory' argument that indicates
whether a link-layer address was assigned by the factory or some
other source. In a comment, recommend using the factory address
for generating an EUI64, and update in6_get_hw_ifid() to prefer a
factory address to any other link-layer address.
Add a routing message, RTM_LLINFO_UPD, that tells protocols to
update the binding of network-layer addresses to link-layer addresses.
Implement this message in IPv4 and IPv6 by sending a gratuitous
ARP or a neighbor advertisement, respectively. Generate RTM_LLINFO_UPD
messages on a change of an interface's link-layer address.
In ether_ioctl(), do not let SIOCALIFADDR set a link-layer address
that is broadcast/multicast or equal to 00:00:00:00:00:00.
Make ether_ioctl() call ifioctl_common() to handle ioctls that it
does not understand.
In gif(4), initialize if_softc and use it, instead of assuming that
the gif_softc and ifp overlap.
Let ifioctl_common() handle SIOCGIFADDR.
Sprinkle rtcache_invariants(), which checks on DIAGNOSTIC kernels
that certain invariants on a struct route are satisfied.
In agr(4), rewrite agr_ioctl_filter() to be a bit more explicit
about the ioctls that we do not allow on an agr(4) member interface.
bzero -> memset. Delete unnecessary casts to void *. Use
sockaddr_in_init() and sockaddr_in6_init(). Compare pointers with
NULL instead of "testing truth". Replace some instances of (type
*)0 with NULL. Change some K&R prototypes to ANSI C, and join
lines.
|
| 1.37 |
| 26-Sep-2008 |
macallan | branches: 1.37.2; 1.37.12;
use access functions to mess with obio's registers
|
| 1.36 |
| 19-Jan-2008 |
dyoung | branches: 1.36.6; 1.36.10; 1.36.12; 1.36.16;
Make many ethernet drivers share the common code for MII media
handling, ether_mediastatus() and ether_mediachange(). Check for
a non-ENXIO error return from mii_mediachg(). (ENXIO indicates
that a PHY is suspended.)
This patch shrinks the source code size by 979 lines. There was
a 5100-byte savings on the NetBSD/i386 kernel configuration, ALL.
I have made a few miscellaneous changes, too:
gem(4): use LIST_EMPTY(), LIST_FOREACH().
mtd(4): handle media ioctls, for a change!
axe(4): do not track link status in sc->axe_link any longer
nfe(4), aue(4), axe(4), udav(4), url(4): do not reset all PHYs
on a change of media
Except for the change to mtd(4), no functional changes are intended.
XXX This patch affects more architectures than I can feasibly
XXX compile and run. I have compiled macppc, sparc64, i386. I
XXX have run the patches on i386 boxen with bnx(4) and sip(4).
XXX Compiling and running on evbmips (MERAKI, ADM5120) is in
XXX progress.
|
| 1.35 |
| 29-Dec-2007 |
dyoung | De-__P().
|
| 1.34 |
| 17-Oct-2007 |
garbled | branches: 1.34.2; 1.34.8;
Merge the ppcoea-renovation branch to HEAD.
This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.
TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.
NOTES:
pmppc was removed as an arch, and moved to a evbppc target.
|
| 1.33 |
| 01-Sep-2007 |
dyoung | branches: 1.33.2; 1.33.4;
Change a bazillion occurrences of code resembling this,
error = (cmd == SIOCADDMULTI) ?
ether_addmulti(ifr, &sc->sc_ec) :
ether_delmulti(ifr, &sc->sc_ec);
if (error == ENETRESET) {
to this,
if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) {
which does the same thing.
(A bazillion is a very large number. This seems to make the i386
ALL kernel smaller by 3kB to 4kB.)
Use ifreq_getaddr() twice in es(4).
Whitespace nits.
|
| 1.32 |
| 09-Jul-2007 |
ad | branches: 1.32.4; 1.32.8; 1.32.10;
Merge some of the less invasive changes from the vmlocking branch:
- kthread, callout, devsw API changes
- select()/poll() improvements
- miscellaneous MT safety improvements
|
| 1.31 |
| 04-Mar-2007 |
macallan | branches: 1.31.2; 1.31.4; 1.31.10;
make this compile again
|
| 1.30 |
| 04-Mar-2007 |
christos | Kill caddr_t; there will be some MI fallout, but it will be fixed shortly.
|
| 1.29 |
| 18-Oct-2006 |
jklos | branches: 1.29.4;
Fix for PR 33667. Note that putting bmac_mediachange where thorpej
suggested doesn't fix this issue. Not a perfect fix, but much better than
leaving it as it was. Tested on several iMacs and a blue & white G3.
|
| 1.28 |
| 07-Sep-2006 |
dogcow | branches: 1.28.2; 1.28.4;
remove more vestiges of CCITT, LLC, HDLC, NS, and NSIP.
|
| 1.27 |
| 24-Dec-2005 |
perry | branches: 1.27.4; 1.27.8;
Remove leading __ from __(const|inline|signed|volatile) -- it is obsolete.
|
| 1.26 |
| 11-Dec-2005 |
christos | merge ktrace-lwp.
|
| 1.25 |
| 30-Jan-2005 |
thorpej | branches: 1.25.4; 1.25.6;
Eliminate use of M_HASFCS.
|
| 1.24 |
| 26-Jan-2005 |
kleink | MPC601: Use RTC instead of TB. (While I'm here, update these to use
the inline versions from <powerpc/cpu.h>).
|
| 1.23 |
| 30-Oct-2004 |
thorpej | branches: 1.23.4; 1.23.6;
When adding/deleting multicast addresses, only whack the address
filter if the interface is marked RUNNING.
Fixes kern/27678.
|
| 1.22 |
| 18-Apr-2004 |
matt | Make this compile with XNS enabled
|
| 1.21 |
| 15-Jul-2003 |
lukem | branches: 1.21.4;
__KERNEL_RCSID()
|
| 1.20 |
| 02-Apr-2003 |
thorpej | branches: 1.20.2;
Use PAGE_SIZE rather than NBPG.
|
| 1.19 |
| 02-Oct-2002 |
thorpej | Use CFATTACH_DECL().
|
| 1.18 |
| 27-Sep-2002 |
thorpej | Declare all cfattach structures const.
|
| 1.17 |
| 05-Mar-2002 |
itojun | bring in latest ALTQ from kjc. ALTQify some of the drivers.
|
| 1.16 |
| 22-Jul-2001 |
wiz | branches: 1.16.6;
bcopy -> memcpy, bzero -> memset, bcmp -> memcmp.
Reviewed by Matt Thomas, ok'd by Tsubai Masanari.
|
| 1.15 |
| 15-Nov-2000 |
thorpej | branches: 1.15.4;
Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach().
|
| 1.14 |
| 01-Nov-2000 |
tsubai | Don't set M_HASFCS flag twice.
|
| 1.13 |
| 18-Oct-2000 |
matt | Packets have the FCS append so set M_HASFCS.
|
| 1.12 |
| 17-Oct-2000 |
tsubai | Pass correct packet length to the upper layer.
|
| 1.11 |
| 28-Aug-2000 |
tsubai | Enable hash filter mode.
|
| 1.10 |
| 29-Jun-2000 |
mrg | remove include of <vm/vm.h>. <vm/vm.h> -> <uvm/uvm_extern.h>
|
| 1.9 |
| 16-Jun-2000 |
tsubai | branches: 1.9.2;
Use ether_crc32_le().
|
| 1.8 |
| 07-Apr-2000 |
tsubai | branches: 1.8.2;
Make this compile again.
|
| 1.7 |
| 23-Mar-2000 |
thorpej | New callout mechanism with two major improvements over the old
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
|
| 1.6 |
| 02-Feb-2000 |
thorpej | Don't dry to diving MIIF_NOISOLATE in the PHY drivers. Instead, pass
flags down from the parent to child vi mii_attach().
|
| 1.5 |
| 02-Feb-2000 |
thorpej | Bring some order to the chaos which was the MII code function naming
"conventions".
|
| 1.4 |
| 25-Jan-2000 |
tsubai | Use MII device layer.
XXX still 100Mbps receive side is very slow...
|
| 1.3 |
| 20-Jun-1999 |
tsubai | branches: 1.3.2;
More initialization by calling Open Firmware.
|
| 1.2 |
| 18-May-1999 |
thorpej | Rework layer 2 protocol input routines. Instead of calling e.g. ether_input()
directly, call the function pointer (*if_input)(ifp, m). The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary. Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
|
| 1.1 |
| 01-Jan-1999 |
tsubai | branches: 1.1.2; 1.1.4;
bmac ethernet driver. (tested on iMac. only 10Base-T works.)
|
| 1.1.4.2 |
| 01-Jul-1999 |
thorpej | Sync w/ -current.
|
| 1.1.4.1 |
| 21-Jun-1999 |
thorpej | Sync w/ -current.
|
| 1.1.2.1 |
| 20-Jan-2000 |
he | Pull up revision 1.3 (requested by danw):
Work around a problem where the 'bm' (iMac and Blue G3 built-in
ethernet) driver only works if initialized from Open Firmware.
|
| 1.3.2.2 |
| 22-Nov-2000 |
bouyer | Sync with HEAD.
|
| 1.3.2.1 |
| 20-Nov-2000 |
bouyer | Update thorpej_scsipi to -current as of a month ago
A i386 GENERIC kernel compiles without the siop, ahc and bha drivers
(will be updated later). i386 IDE/ATAPI and ncr work, as well as
sparc/esp_sbus. alpha should work as well (untested yet).
siop, ahc and bha will be updated once I've updated the branch to current
-current, as well as machine-dependant code.
|
| 1.8.2.1 |
| 22-Jun-2000 |
minoura | Sync w/ netbsd-1-5-base.
|
| 1.9.2.1 |
| 01-Nov-2000 |
tv | Pullup 1.11-1.13 [tsubai, matt, mycroft]:
Packets have the FCS append so set M_HASFCS.
Pass correct packet length to the upper layer.
Enable hash filter mode.
|
| 1.15.4.3 |
| 10-Oct-2002 |
jdolecek | sync kqueue with -current; this includes merge of gehenna-devsw branch,
merge of i386 MP branch, and part of autoconf rototil work
|
| 1.15.4.2 |
| 16-Mar-2002 |
jdolecek | Catch up with -current.
|
| 1.15.4.1 |
| 03-Aug-2001 |
lukem | update to -current
|
| 1.16.6.3 |
| 18-Oct-2002 |
nathanw | Catch up to -current.
|
| 1.16.6.2 |
| 01-Apr-2002 |
nathanw | Catch up to -current.
(CVS: It's not just a program. It's an adventure!)
|
| 1.16.6.1 |
| 22-Jul-2001 |
nathanw | file if_bm.c was added on branch nathanw_sa on 2002-04-01 07:40:53 +0000
|
| 1.20.2.5 |
| 04-Feb-2005 |
skrll | Sync with HEAD.
|
| 1.20.2.4 |
| 02-Nov-2004 |
skrll | Sync with HEAD.
|
| 1.20.2.3 |
| 21-Sep-2004 |
skrll | Fix the sync with head I botched.
|
| 1.20.2.2 |
| 18-Sep-2004 |
skrll | Sync with HEAD.
|
| 1.20.2.1 |
| 03-Aug-2004 |
skrll | Sync with HEAD
|
| 1.21.4.1 |
| 24-Jan-2005 |
he | Pull up revision 1.23 (requested by thorpej in ticket #939):
When adding or deleting multicast addresses, only change
the address filter if the interface is marked RUNNING.
Fixes PR#27678.
|
| 1.23.6.1 |
| 12-Feb-2005 |
yamt | sync with head.
|
| 1.23.4.1 |
| 29-Apr-2005 |
kent | sync with -current
|
| 1.25.6.5 |
| 21-Jan-2008 |
yamt | sync with head
|
| 1.25.6.4 |
| 27-Oct-2007 |
yamt | sync with head.
|
| 1.25.6.3 |
| 03-Sep-2007 |
yamt | sync with head.
|
| 1.25.6.2 |
| 30-Dec-2006 |
yamt | sync with head.
|
| 1.25.6.1 |
| 21-Jun-2006 |
yamt | sync with head.
|
| 1.25.4.1 |
| 31-Mar-2007 |
bouyer | Pull up following revision(s) (requested by sborrill in ticket #1685):
sys/arch/macppc/dev/if_bm.c: revision 1.29
Fix for PR 33667. Note that putting bmac_mediachange where thorpej
suggested doesn't fix this issue. Not a perfect fix, but much better than
leaving it as it was. Tested on several iMacs and a blue & white G3.
|
| 1.27.8.1 |
| 14-Sep-2006 |
yamt | sync with head.
|
| 1.27.4.1 |
| 09-Sep-2006 |
rpaulo | sync with head
|
| 1.28.4.1 |
| 22-Oct-2006 |
yamt | sync with head
|
| 1.28.2.1 |
| 18-Nov-2006 |
ad | Sync with head.
|
| 1.29.4.1 |
| 12-Mar-2007 |
rmind | Sync with HEAD.
|
| 1.31.10.6 |
| 03-Oct-2007 |
garbled | Sync with HEAD
|
| 1.31.10.5 |
| 27-Sep-2007 |
macallan | adapt to changed ether_addmulti() signature
|
| 1.31.10.4 |
| 02-Aug-2007 |
macallan | fix typo - bus_space_map() returns 0 on success, not the other way around
also map what OF reports, not a whole page
|
| 1.31.10.3 |
| 02-Aug-2007 |
macallan | sync with HEAD
|
| 1.31.10.2 |
| 07-Jun-2007 |
garbled | Convert macppc to powerpc bus_space. Lots of work here from Matt Thomas,
as well as the common ofwoea code from myself. Compile tested only,
still probably needs some fine tuning.
Also in this commit:
Convert macppc to new shared ofwoea routines.
Lots of KNF.
|
| 1.31.10.1 |
| 11-May-2007 |
macallan | request the correct interrupt type in a couple drivers - necessary since
these days we actually do something with the type argument
|
| 1.31.4.1 |
| 11-Jul-2007 |
mjf | Sync with head.
|
| 1.31.2.3 |
| 23-Oct-2007 |
ad | Sync with head.
|
| 1.31.2.2 |
| 09-Oct-2007 |
ad | Sync with head.
|
| 1.31.2.1 |
| 15-Jul-2007 |
ad | Sync with head.
|
| 1.32.10.3 |
| 23-Mar-2008 |
matt | sync with HEAD
|
| 1.32.10.2 |
| 09-Jan-2008 |
matt | sync with HEAD
|
| 1.32.10.1 |
| 06-Nov-2007 |
matt | sync with HEAD
|
| 1.32.8.2 |
| 26-Oct-2007 |
joerg | Sync with HEAD.
Follow the merge of pmap.c on i386 and amd64 and move
pmap_init_tmp_pgtbl into arch/x86/x86/pmap.c. Modify the ACPI wakeup
code to restore CR4 before jumping back into kernel space as the large
page option might cover that.
|
| 1.32.8.1 |
| 03-Sep-2007 |
jmcneill | Sync with HEAD.
|
| 1.32.4.1 |
| 03-Sep-2007 |
skrll | Sync with HEAD.
|
| 1.33.4.1 |
| 25-Oct-2007 |
bouyer | Sync with HEAD.
|
| 1.33.2.1 |
| 18-Oct-2007 |
yamt | sync with head.
|
| 1.34.8.2 |
| 20-Jan-2008 |
bouyer | Sync with HEAD
|
| 1.34.8.1 |
| 02-Jan-2008 |
bouyer | Sync with HEAD
|
| 1.34.2.1 |
| 18-Feb-2008 |
mjf | Sync with HEAD.
|
| 1.36.16.2 |
| 13-Dec-2008 |
haad | Update haad-dm branch to haad-dm-base2.
|
| 1.36.16.1 |
| 19-Oct-2008 |
haad | Sync with HEAD.
|
| 1.36.12.1 |
| 10-Oct-2008 |
skrll | Sync with HEAD.
|
| 1.36.10.3 |
| 11-Aug-2010 |
yamt | sync with head.
|
| 1.36.10.2 |
| 11-Mar-2010 |
yamt | sync with head
|
| 1.36.10.1 |
| 04-May-2009 |
yamt | sync with head.
|
| 1.36.6.2 |
| 17-Jan-2009 |
mjf | Sync with HEAD.
|
| 1.36.6.1 |
| 28-Sep-2008 |
mjf | Sync with HEAD.
|
| 1.37.12.1 |
| 07-Jan-2011 |
matt | Deal with split <spr.h> (and a few other misc fixes).
|
| 1.37.2.2 |
| 28-Apr-2009 |
skrll | Sync with HEAD.
|
| 1.37.2.1 |
| 19-Jan-2009 |
skrll | Sync with HEAD.
|
| 1.38.4.1 |
| 13-May-2009 |
jym | Sync with HEAD.
Commit is split, to avoid a "too many arguments" protocol error.
|
| 1.41.2.1 |
| 30-Apr-2010 |
uebayasi | Sync with HEAD.
|
| 1.42.2.1 |
| 30-May-2010 |
rmind | sync with head
|
| 1.43.6.1 |
| 23-Jun-2011 |
cherry | Catchup with rmind-uvmplock merge.
|
| 1.45.2.1 |
| 30-Oct-2012 |
yamt | sync with head
|
| 1.46.16.4 |
| 05-Feb-2017 |
skrll | Sync with HEAD
|
| 1.46.16.3 |
| 05-Oct-2016 |
skrll | Sync with HEAD
|
| 1.46.16.2 |
| 09-Jul-2016 |
skrll | Sync with HEAD
|
| 1.46.16.1 |
| 19-Mar-2016 |
skrll | Sync with HEAD
|
| 1.46.2.1 |
| 03-Dec-2017 |
jdolecek | update from HEAD
|
| 1.48.2.3 |
| 07-Jan-2017 |
pgoyette | Sync with HEAD. (Note that most of these changes are simply $NetBSD$
tag issues.)
|
| 1.48.2.2 |
| 04-Nov-2016 |
pgoyette | Sync with HEAD
|
| 1.48.2.1 |
| 26-Jul-2016 |
pgoyette | Sync with HEAD
|
| 1.53.14.3 |
| 26-Jan-2019 |
pgoyette | Sync with HEAD
|
| 1.53.14.2 |
| 06-Sep-2018 |
pgoyette | Sync with HEAD
Resolve a couple of conflicts (result of the uimin/uimax changes)
|
| 1.53.14.1 |
| 28-Jul-2018 |
pgoyette | Sync with HEAD
|
| 1.54.2.3 |
| 13-Apr-2020 |
martin | Mostly merge changes from HEAD upto 20200411
|
| 1.54.2.2 |
| 08-Apr-2020 |
martin | Merge changes from current as of 20200406
|
| 1.54.2.1 |
| 10-Jun-2019 |
christos | Sync with HEAD
|
| 1.61.2.1 |
| 29-Feb-2020 |
ad | Sync with head.
|
| 1.63.6.1 |
| 03-Apr-2021 |
thorpej | Sync with HEAD.
|
