Searched hist:d (Results 1 - 25 of 4313) sorted by relevance
| /src/sys/arch/sgimips/dev/ | ||
| H A D | ctlreg.h | 1.1 Tue Feb 10 06:04:56 GMT 2009 rumble branches: 1.1.2; 1.1.4; 1.1.6; Check in work in progress of Personal IRIS 4D/20 and 4D/25 support (IP6 and IP10, respectively). 1.1 Tue Feb 10 06:04:56 GMT 2009 rumble branches: 1.1.2; 1.1.4; 1.1.6; Check in work in progress of Personal IRIS 4D/20 and 4D/25 support (IP6 and IP10, respectively). |
| H A D | scnreg.h | 1.1 Tue Feb 10 06:04:56 GMT 2009 rumble branches: 1.1.2; 1.1.4; 1.1.6; Check in work in progress of Personal IRIS 4D/20 and 4D/25 support (IP6 and IP10, respectively). 1.1 Tue Feb 10 06:04:56 GMT 2009 rumble branches: 1.1.2; 1.1.4; 1.1.6; Check in work in progress of Personal IRIS 4D/20 and 4D/25 support (IP6 and IP10, respectively). |
| H A D | int1reg.h | 1.2 Thu Feb 12 06:33:57 GMT 2009 rumble branches: 1.2.2; 1.2.4; 1.2.6; Enable Personal IRIS 4D/20 and 4D/25 support: - Adapt int(4) to handle the INT1 chip - Move generic rtc clocks out of hpc/ and into dev/ - Handle the very strangely wired eeprom and other bits in arcemu - Sprinkle MACH_SGI_IP6 as necessary - Enable IP6/IP10 devices in GENERIC32_IP12. Yes, the naming is poor but there's no winning with kernel/hw compatibility on sgimips... Tested on my 4D/25. Doesn't (appear to) break macallan@'s IP22. 1.2 Thu Feb 12 06:33:57 GMT 2009 rumble branches: 1.2.2; 1.2.4; 1.2.6; Enable Personal IRIS 4D/20 and 4D/25 support: - Adapt int(4) to handle the INT1 chip - Move generic rtc clocks out of hpc/ and into dev/ - Handle the very strangely wired eeprom and other bits in arcemu - Sprinkle MACH_SGI_IP6 as necessary - Enable IP6/IP10 devices in GENERIC32_IP12. Yes, the naming is poor but there's no winning with kernel/hw compatibility on sgimips... Tested on my 4D/25. Doesn't (appear to) break macallan@'s IP22. 1.2 Thu Feb 12 06:33:57 GMT 2009 rumble branches: 1.2.2; 1.2.4; 1.2.6; Enable Personal IRIS 4D/20 and 4D/25 support: - Adapt int(4) to handle the INT1 chip - Move generic rtc clocks out of hpc/ and into dev/ - Handle the very strangely wired eeprom and other bits in arcemu - Sprinkle MACH_SGI_IP6 as necessary - Enable IP6/IP10 devices in GENERIC32_IP12. Yes, the naming is poor but there's no winning with kernel/hw compatibility on sgimips... Tested on my 4D/25. Doesn't (appear to) break macallan@'s IP22. 1.1 Tue Feb 10 06:04:56 GMT 2009 rumble Check in work in progress of Personal IRIS 4D/20 and 4D/25 support (IP6 and IP10, respectively). 1.1 Tue Feb 10 06:04:56 GMT 2009 rumble Check in work in progress of Personal IRIS 4D/20 and 4D/25 support (IP6 and IP10, respectively). |
| H A D | scnvar.h | 1.1 Tue Feb 10 06:04:56 GMT 2009 rumble branches: 1.1.2; 1.1.4; 1.1.6; 1.1.18; 1.1.28; Check in work in progress of Personal IRIS 4D/20 and 4D/25 support (IP6 and IP10, respectively). 1.1 Tue Feb 10 06:04:56 GMT 2009 rumble branches: 1.1.2; 1.1.4; 1.1.6; 1.1.18; 1.1.28; Check in work in progress of Personal IRIS 4D/20 and 4D/25 support (IP6 and IP10, respectively). |
| H A D | dp8573areg.h | 1.1 Thu Feb 12 06:33:57 GMT 2009 rumble branches: 1.1.2; 1.1.4; 1.1.6; Enable Personal IRIS 4D/20 and 4D/25 support: - Adapt int(4) to handle the INT1 chip - Move generic rtc clocks out of hpc/ and into dev/ - Handle the very strangely wired eeprom and other bits in arcemu - Sprinkle MACH_SGI_IP6 as necessary - Enable IP6/IP10 devices in GENERIC32_IP12. Yes, the naming is poor but there's no winning with kernel/hw compatibility on sgimips... Tested on my 4D/25. Doesn't (appear to) break macallan@'s IP22. 1.1 Thu Feb 12 06:33:57 GMT 2009 rumble branches: 1.1.2; 1.1.4; 1.1.6; Enable Personal IRIS 4D/20 and 4D/25 support: - Adapt int(4) to handle the INT1 chip - Move generic rtc clocks out of hpc/ and into dev/ - Handle the very strangely wired eeprom and other bits in arcemu - Sprinkle MACH_SGI_IP6 as necessary - Enable IP6/IP10 devices in GENERIC32_IP12. Yes, the naming is poor but there's no winning with kernel/hw compatibility on sgimips... Tested on my 4D/25. Doesn't (appear to) break macallan@'s IP22. 1.1 Thu Feb 12 06:33:57 GMT 2009 rumble branches: 1.1.2; 1.1.4; 1.1.6; Enable Personal IRIS 4D/20 and 4D/25 support: - Adapt int(4) to handle the INT1 chip - Move generic rtc clocks out of hpc/ and into dev/ - Handle the very strangely wired eeprom and other bits in arcemu - Sprinkle MACH_SGI_IP6 as necessary - Enable IP6/IP10 devices in GENERIC32_IP12. Yes, the naming is poor but there's no winning with kernel/hw compatibility on sgimips... Tested on my 4D/25. Doesn't (appear to) break macallan@'s IP22. |
| /src/sys/arch/sgimips/ioc/ | ||
| H A D | oiocreg.h | 1.1 Tue Feb 10 06:04:56 GMT 2009 rumble branches: 1.1.2; 1.1.4; 1.1.6; Check in work in progress of Personal IRIS 4D/20 and 4D/25 support (IP6 and IP10, respectively). 1.1 Tue Feb 10 06:04:56 GMT 2009 rumble branches: 1.1.2; 1.1.4; 1.1.6; Check in work in progress of Personal IRIS 4D/20 and 4D/25 support (IP6 and IP10, respectively). |
| H A D | oiocvar.h | 1.1 Tue Feb 10 06:04:56 GMT 2009 rumble branches: 1.1.2; 1.1.4; 1.1.6; Check in work in progress of Personal IRIS 4D/20 and 4D/25 support (IP6 and IP10, respectively). 1.1 Tue Feb 10 06:04:56 GMT 2009 rumble branches: 1.1.2; 1.1.4; 1.1.6; Check in work in progress of Personal IRIS 4D/20 and 4D/25 support (IP6 and IP10, respectively). |
| /src/etc/rc.d/ | ||
| H A D | ftpd | 1.3 Tue Aug 09 14:59:33 GMT 2005 peter Add command_args="-D" to the ftpd rc.d script. This flag is always needed when running ftpd as daemon and it will now automatically be appended to the command line, even if ftpd_flags doesn't have it. Suggested by Alan Barrett and Luke Mewburn, thanks. 1.3 Tue Aug 09 14:59:33 GMT 2005 peter Add command_args="-D" to the ftpd rc.d script. This flag is always needed when running ftpd as daemon and it will now automatically be appended to the command line, even if ftpd_flags doesn't have it. Suggested by Alan Barrett and Luke Mewburn, thanks. 1.2 Mon Aug 08 00:19:37 GMT 2005 peter Add a note telling that ftpd_flags should always contain "-D". Suggested by lukem@. 1.1 Thu Aug 04 22:28:17 GMT 2005 peter Add rc.d support for standalone ftpd, suggested by perry@. |
| H A D | isibootd | 1.1 Sat Dec 17 13:37:49 GMT 2011 tsutsui branches: 1.1.4; Add an rc.d(8) script for isibootd(8). Taken from ndbootd(8). |
| H A D | lvmlockdir | 1.1 Tue Jan 26 13:31:19 GMT 2021 martin Rename etc/rc.d/llvmlockdir to lvmlockdir - it has nothing to do with LLVM, the name probably was a freudian slip of my fingers when I split that fragment out of another rc.d script. 1.1 Tue Jan 26 13:31:19 GMT 2021 martin Rename etc/rc.d/llvmlockdir to lvmlockdir - it has nothing to do with LLVM, the name probably was a freudian slip of my fingers when I split that fragment out of another rc.d script. |
| /src/tests/usr.bin/rump_server/ | ||
| H A D | Makefile | 1.1 Thu Feb 03 15:38:18 GMT 2011 pooka branches: 1.1.2; add tests for the -d functionality of rump_server(1) |
| /src/sys/dev/i2c/ | ||
| H A D | r2025reg.h | 1.1 Mon Mar 06 19:55:08 GMT 2006 shige branches: 1.1.4; 1.1.8; 1.1.14; 1.1.20; Add a driver for RICOH R2025S/D I2C RTC. |
| /src/sys/arch/cobalt/stand/boot/ | ||
| H A D | common.h | 1.3 Sat Jan 22 19:19:16 GMT 2011 joerg Drop bootprog_maker (formerly enabled by -M) and bootprog_date (formerly disabled by -D) from the output of newvers_stand.sh. Change -D to the inverted logic, so that it adds the date to bootprog_rev in (). Change all platforms accordingly. -D is added if MKREPRO is not yes and wasn't present before. Platforms that didn't use -D don't depend on MKREPRO now either. 1.3 Sat Jan 22 19:19:16 GMT 2011 joerg Drop bootprog_maker (formerly enabled by -M) and bootprog_date (formerly disabled by -D) from the output of newvers_stand.sh. Change -D to the inverted logic, so that it adds the date to bootprog_rev in (). Change all platforms accordingly. -D is added if MKREPRO is not yes and wasn't present before. Platforms that didn't use -D don't depend on MKREPRO now either. 1.3 Sat Jan 22 19:19:16 GMT 2011 joerg Drop bootprog_maker (formerly enabled by -M) and bootprog_date (formerly disabled by -D) from the output of newvers_stand.sh. Change -D to the inverted logic, so that it adds the date to bootprog_rev in (). Change all platforms accordingly. -D is added if MKREPRO is not yes and wasn't present before. Platforms that didn't use -D don't depend on MKREPRO now either. 1.3 Sat Jan 22 19:19:16 GMT 2011 joerg Drop bootprog_maker (formerly enabled by -M) and bootprog_date (formerly disabled by -D) from the output of newvers_stand.sh. Change -D to the inverted logic, so that it adds the date to bootprog_rev in (). Change all platforms accordingly. -D is added if MKREPRO is not yes and wasn't present before. Platforms that didn't use -D don't depend on MKREPRO now either. |
| /src/share/examples/rump/ | ||
| H A D | README | 1.1 Thu Nov 11 23:04:24 GMT 2010 pooka Add readme explaining which grue has ok'd the eating of some code until recently located here. |
| /src/sys/arch/amiga/pci/ | ||
| H A D | cv3dpbreg.h | 1.1 Wed Jan 11 17:04:29 GMT 2012 rkujawa branches: 1.1.4; 1.1.6; Add cv3dpb, a driver for CyberVision64/3D PCI bridge, which was split from p5pb. |
| H A D | cv3dpbvar.h | 1.1 Wed Jan 11 17:04:29 GMT 2012 rkujawa branches: 1.1.4; 1.1.6; Add cv3dpb, a driver for CyberVision64/3D PCI bridge, which was split from p5pb. |
| /src/share/man/man3/ | ||
| H A D | __USE.3 | 1.2 Thu Oct 17 19:37:56 GMT 2013 jnemeth branches: 1.2.4; 1.2.8; - DPRINTF(("val is %d\n", val)); -> DPRINTF(("val is %d\n", var)); - mdoclint: - .Nd should not end with period - remove trailing spaces 1.2 Thu Oct 17 19:37:56 GMT 2013 jnemeth branches: 1.2.4; 1.2.8; - DPRINTF(("val is %d\n", val)); -> DPRINTF(("val is %d\n", var)); - mdoclint: - .Nd should not end with period - remove trailing spaces |
| /src/tests/sys/rc/ | ||
| H A D | Makefile | 1.1 Mon Mar 15 19:03:08 GMT 2010 jmmv Add some basic tests for rc.d scripts to validate the execution of subcommands and the optional argument passing to them from the command line. Triggered by the modification of the run_rc_command function in rc.subr to allow passing in extra parameters to the commands defined in rc.d scripts. 1.1 Mon Mar 15 19:03:08 GMT 2010 jmmv Add some basic tests for rc.d scripts to validate the execution of subcommands and the optional argument passing to them from the command line. Triggered by the modification of the run_rc_command function in rc.subr to allow passing in extra parameters to the commands defined in rc.d scripts. |
| H A D | h_args.sh | 1.1 Mon Mar 15 19:03:08 GMT 2010 jmmv Add some basic tests for rc.d scripts to validate the execution of subcommands and the optional argument passing to them from the command line. Triggered by the modification of the run_rc_command function in rc.subr to allow passing in extra parameters to the commands defined in rc.d scripts. 1.1 Mon Mar 15 19:03:08 GMT 2010 jmmv Add some basic tests for rc.d scripts to validate the execution of subcommands and the optional argument passing to them from the command line. Triggered by the modification of the run_rc_command function in rc.subr to allow passing in extra parameters to the commands defined in rc.d scripts. |
| H A D | h_simple.sh | 1.1 Mon Mar 15 19:03:08 GMT 2010 jmmv Add some basic tests for rc.d scripts to validate the execution of subcommands and the optional argument passing to them from the command line. Triggered by the modification of the run_rc_command function in rc.subr to allow passing in extra parameters to the commands defined in rc.d scripts. 1.1 Mon Mar 15 19:03:08 GMT 2010 jmmv Add some basic tests for rc.d scripts to validate the execution of subcommands and the optional argument passing to them from the command line. Triggered by the modification of the run_rc_command function in rc.subr to allow passing in extra parameters to the commands defined in rc.d scripts. |
| /src/tests/lib/libc/gen/ | ||
| H A D | t_fmtcheck.c | 1.5 Wed Dec 13 06:47:04 GMT 2017 rin Revert rev 1.4: fmtcheck(3) neglect unused trailing arguments as before. "%d" is a valid format string with default format string "%d %s", etc. 1.5 Wed Dec 13 06:47:04 GMT 2017 rin Revert rev 1.4: fmtcheck(3) neglect unused trailing arguments as before. "%d" is a valid format string with default format string "%d %s", etc. 1.4 Thu Dec 07 09:37:33 GMT 2017 kre Correct a couple of broken test cases: "%d" does not take the same args as "%d %s" "%%" does not take the same args as "%llx" How did these ever survive any kind of even basic sanity check? 1.4 Thu Dec 07 09:37:33 GMT 2017 kre Correct a couple of broken test cases: "%d" does not take the same args as "%d %s" "%%" does not take the same args as "%llx" How did these ever survive any kind of even basic sanity check? |
| /src/sys/modules/hpacel/ | ||
| H A D | hpacel.ioconf | 1.1 Wed Jul 13 07:52:49 GMT 2011 jruoho A driver for HP 3D DriverGuard; a LIS3LV02DL-based accelerometer. Tested on HP NC4400. Like aps(4), this is commented out in the GENERIC kernels. |
| /src/sys/arch/sbmips/stand/common/ | ||
| H A D | common.h | 1.3 Sat Jan 22 19:19:22 GMT 2011 joerg Drop bootprog_maker (formerly enabled by -M) and bootprog_date (formerly disabled by -D) from the output of newvers_stand.sh. Change -D to the inverted logic, so that it adds the date to bootprog_rev in (). Change all platforms accordingly. -D is added if MKREPRO is not yes and wasn't present before. Platforms that didn't use -D don't depend on MKREPRO now either. 1.3 Sat Jan 22 19:19:22 GMT 2011 joerg Drop bootprog_maker (formerly enabled by -M) and bootprog_date (formerly disabled by -D) from the output of newvers_stand.sh. Change -D to the inverted logic, so that it adds the date to bootprog_rev in (). Change all platforms accordingly. -D is added if MKREPRO is not yes and wasn't present before. Platforms that didn't use -D don't depend on MKREPRO now either. 1.3 Sat Jan 22 19:19:22 GMT 2011 joerg Drop bootprog_maker (formerly enabled by -M) and bootprog_date (formerly disabled by -D) from the output of newvers_stand.sh. Change -D to the inverted logic, so that it adds the date to bootprog_rev in (). Change all platforms accordingly. -D is added if MKREPRO is not yes and wasn't present before. Platforms that didn't use -D don't depend on MKREPRO now either. 1.3 Sat Jan 22 19:19:22 GMT 2011 joerg Drop bootprog_maker (formerly enabled by -M) and bootprog_date (formerly disabled by -D) from the output of newvers_stand.sh. Change -D to the inverted logic, so that it adds the date to bootprog_rev in (). Change all platforms accordingly. -D is added if MKREPRO is not yes and wasn't present before. Platforms that didn't use -D don't depend on MKREPRO now either. |
| /src/sys/arch/evbarm/stand/gzboot/ | ||
| H A D | gzboot.h | 1.1 Sat Feb 23 05:41:14 GMT 2002 thorpej branches: 1.1.2; 1.1.14; gzboot -- boot a gzip'd kernel image. This is useful for booting compressed kernel images from flash. This needs more work, but is a good first-pass. |
| /src/sys/arch/hpcmips/stand/lcboot/ | ||
| H A D | main.c | 1.6 Sat Jan 22 19:19:18 GMT 2011 joerg branches: 1.6.14; 1.6.32; Drop bootprog_maker (formerly enabled by -M) and bootprog_date (formerly disabled by -D) from the output of newvers_stand.sh. Change -D to the inverted logic, so that it adds the date to bootprog_rev in (). Change all platforms accordingly. -D is added if MKREPRO is not yes and wasn't present before. Platforms that didn't use -D don't depend on MKREPRO now either. 1.6 Sat Jan 22 19:19:18 GMT 2011 joerg branches: 1.6.14; 1.6.32; Drop bootprog_maker (formerly enabled by -M) and bootprog_date (formerly disabled by -D) from the output of newvers_stand.sh. Change -D to the inverted logic, so that it adds the date to bootprog_rev in (). Change all platforms accordingly. -D is added if MKREPRO is not yes and wasn't present before. Platforms that didn't use -D don't depend on MKREPRO now either. 1.6 Sat Jan 22 19:19:18 GMT 2011 joerg branches: 1.6.14; 1.6.32; Drop bootprog_maker (formerly enabled by -M) and bootprog_date (formerly disabled by -D) from the output of newvers_stand.sh. Change -D to the inverted logic, so that it adds the date to bootprog_rev in (). Change all platforms accordingly. -D is added if MKREPRO is not yes and wasn't present before. Platforms that didn't use -D don't depend on MKREPRO now either. 1.6 Sat Jan 22 19:19:18 GMT 2011 joerg branches: 1.6.14; 1.6.32; Drop bootprog_maker (formerly enabled by -M) and bootprog_date (formerly disabled by -D) from the output of newvers_stand.sh. Change -D to the inverted logic, so that it adds the date to bootprog_rev in (). Change all platforms accordingly. -D is added if MKREPRO is not yes and wasn't present before. Platforms that didn't use -D don't depend on MKREPRO now either. |
Completed in 57 milliseconds