remove lingering strip(4) remnants

branches: 1.105.20;
vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

base INSTALL kernel upon GENERIC with many "no ...".

branches: 1.103.4;
Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.102.6;
Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

Retire the 'midway' driver. Discussed on tech-net@ recently and also three
years ago, part of removing the network ATM code.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.99.2; 1.99.4;
Nuke DIRECTED_BROADCAST, it is not documented and not enabled anywhere. It
probably wouldn't have built correctly anyway, since there is no associated
defflag.

These ten lines of code in ip_input.c already look a lot better.

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

Bump the ram disk and miniroot size slightly for clang.

branches: 1.95.2;
wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.92.2;
- purge long obsolete RASTERCONSOLE
- add mgx

Remove KMEMSTATS. Normally it's ok now.

branches: 1.90.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

fix manual section numbering of sysctl.
thanks wiz@

G/C PFIL_HOOKS from the kernel configs.

branches: 1.87.4;
the bogus number police

remove confusing numeric locators where they are unused.

Retire OSI network stack. OK core@

add sx at mainbus

branches: 1.83.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

switch to WSEMUL_VT100 to reduce differences with sparc64 and other wscons
and fb console using ports
WSEMUL_SUN is left in but commented out so whoever wants it back can have it
with minimal effort

Remove stray comments for LKM.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.79.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.78.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.77.2; 1.77.4;
Remove unused count from pseudo-device md.

make sure to include a small font for machines like the SPARCbook 3GX
should fix PR43297

Remove unused count (invariably "4") from pseudo-device fss.

enable CG12 support

branches: 1.73.2;
enable PNOZZ_USE_LATCH in case we run into some hardware which needs it

branches: 1.72.2;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Remove commented out and nonexistent cgthree at obio stuff.

SPARCclassic has onboard CG3 but it's internally connected via SBus,
and there is no info about sun4m machines which actually require
cgthree at obio attachment. Info from jdc@.

enable the tcx driver

Add -lprop to the ramdisk build, so that it builds again, due to
recent changes in newfs. Bump the ramdisk size from 1536 to 1800
blocks as a consequence.

enable ZX/Leo since we now support wscons on it

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.66.2;
Cosmetic clean up:
options<space><tab>

Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

convert to wscons, while there add some missing wsdisplay drivers

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.62.2; 1.62.4; 1.62.8;
Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.61.2;
Increase RAMDISK size due to ever-increasing bloat.

branches: 1.60.16; 1.60.20; 1.60.22; 1.60.24;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.59.10;
Add COMPAT_40. While here, make COMPAT_30 comment match other COMPAT_*.

branches: 1.58.6; 1.58.8; 1.58.14;
update comments on NFS_V2_ONLY after nqnfs removal. no functional changes.
from Arnaud Lacombe.

remove MALLOC_NOINLINE, it doesn't do anything anymore.

- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.55.2; 1.55.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

branches: 1.54.2;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.52.2; 1.52.4; 1.52.6;
Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

branches: 1.48.4;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.44.4; 1.44.6;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.41.2;
Add COMPAT_16.

add rnd(4) device to installation media.
necessary for many purposes, including password seeding, tcp sequence number,
and more. see tech-security

branches: 1.39.2;
Bye Bye UCONSOLE

crank memory disk from 1360 blocks to 1376 blocks

enable USERCONF by default; it's small and extremely useful to have available.

Ensure all INSTALL config files consistantly include PIPE_SOCKETPAIR,
MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they
include another config files that already defines the options, or if
they are for an embedded board, just define a few extra options, and
do not already define PIPE_SOCKETPAIR.

branches: 1.35.2;
- Enable NFS_BOOT_DHCP (as well as the existing NFS_BOOT_BOOTPARAM).
DHCP/Bootp is tried before bootparams in the MI nfs mountroot code.
- Change the order in boot.net from "bootparams then bootp" to
"bootp then bootparams", to be consistent with the MI nfs mountroot code.

(Consistency with other NetBSD ports is good, and things still work
for sites that run bootparams but not dhcp/bootp, although I'd argue that
dhcp/bootp is much easier to setup and manage and is easier to debug
than our rpc.bootparamd...)

Per discussion with Paul Kranenburg and Matt Green.

Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

Update description for icsphy.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.26.2; 1.26.8;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Update comment accompanying the SUN4_MMU3L option.

Enable sun4 support and VME devices.

Adjust md root filesystem size.
Enable MFS.

Ensure all INSTALL* kernels have two ptys, and a note explaining why:
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.

Use "options<SPACE><TAB>" not "options<TAB>" - noted by simonb.
Move VNODE_OP_NOINLINE and NFS_V2_ONLY into '# Filesystem options' section.
Consistently label '# Filesystem options' and '#File systems' sections.

Ensure all INSTALL config files have (at least) COPTS="-Os", cincluding bebox
based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

Switch INSTALL back to being used by miniroot install.
Add INSTALL-SYSINST config for sysinst install.
These are expected to diverge more as time progresses.

Diet a little to help fitting onto a floppy

remove COMPAT_AOUT option.

Drop KERNFS

branches: 1.14.2;
Make the ramdisk space the same as the ramdisk size being built in distrib

branches: 1.13.2;
Add (sometimes commented out) MIIVERBOSE option.

Expand md filesystem to 3.6MB.

branches: 1.11.2;
It's time to be COMPAT_14.

update comments for mi VME

enable xbox and ppp

update this to GENERIC rev. 1.84.

SPARC console is black on white, and is centered by default.

Update configuration to match `rasops' fixes and config glue.

Bring sparc/sparc64 fb code and kernel configuration into line with
rcons changes.

branches: 1.4.2; 1.4.4; 1.4.6;
bump size of miniroot

enable kernfs and mfs.

remove options FIFO; it's now the default

rename FLOPPY INSTALL, as it is used for cdroms also