| History log of /src/sys/arch/acorn32/podulebus/icside.c |
| Revision | | Date | Author | Comments |
| 1.36 |
| 20-Dec-2023 |
thorpej | Remove unnecessary <sys/malloc.h>.
|
| 1.35 |
| 04-Apr-2022 |
andvar | fix various typos, mainly in comments.
|
| 1.34 |
| 20-Oct-2017 |
jdolecek | move ata_queue_alloc(1) and ata_queue_free() calls to ata_channel_init()
and ata_channel_destroy() respectively, to make attachment code simpler,
and to make it easier to spot special queue manipulation like cmdide(4)
on topic of PR kern/52606
|
| 1.33 |
| 07-Oct-2017 |
jdolecek | Merge support for SATA NCQ (Native Command Queueing) from jdolecek-ncq branch
ATA subsystem was changed to support several outstanding commands, and use
NCQ xfers if supported by both the controller and the disk, including NCQ
error recovery. Set NCQ high priority for BPRIO_TIMECRITICAL xfers
if supported. Added FUA support.
Done some work towards MP-safe, all ATA code tsleep()/wakeup() replaced
by condvars, and switched most code from spl* to mutexes (separate
wd(4) and ata channel lock).
Introduced new option WD_CHAOS_MONKEY to facilitate testing of error
handling, fixed several uncovered issues. Also fixed several problems
with kernel dump to wd(4) disk.
Tested with ahcisata(4), mvsata(4), siisata(4), piixide(4) on amd64,
with and without port multiplier, both disk and ATAPI devices; other
drivers and archs mechanically adjusted and compile-tested. NCQ is
supported for ahcisata(4) and siisata(4) for any controller, for
mvsata(4) only Gen IIe ones for now. Also enabled ATAPI support in
mvsata(4).
Thanks to Matt Thomas for initial ATA infrastructure patch, and
Jonathan A.Kollasch for siisata(4) NCQ changes and general testing.
Also fixes PR kern/43169 (wd(4)); and PR kern/11811, PR kern/47041,
PR kern/51979 (kernel dump)
|
| 1.32 |
| 31-Jul-2012 |
bouyer | branches: 1.32.2; 1.32.28;
Apply back changes that were reverted on Jul 24 and Jul 26 (general ata/wdc
cleanup and SATA PMP support), now that I'm back to fix the fallouts.
|
| 1.31 |
| 26-Jul-2012 |
jakllsch | Revert, with intention of restoring in a less invasive way, the SATA Port
Multiplier code.
ok christos@
|
| 1.30 |
| 02-Jul-2012 |
bouyer | Add sata Port MultiPlier (PMP) support to the ata bus layer,
as described in
http://mail-index.netbsd.org/tech-kern/2012/06/23/msg013442.html
PMP support in integrated to the atabus layer.
struct ata_channel's ch_drive[] is not dynamically allocated, and ch_ndrive
(renamed to ch_ndrives) closely reflects the size of the ch_drive[] array.
Add helper functions atabus_alloc_drives() and atabus_free_drives()
to manage ch_drive[]/ch_ndrives.
Add wdc_maxdrives to struct wdc_softc so that bus front-end can specify
how much drive they really support (master/slave or single).
ata_reset_drive() callback gains a uint32_t *sigp argument which,
when not NULL, will contain the signature of the device being reset.
While there, some cosmetic changes:
- added a drive_type enum to ata_drive_datas, and stop encoding the
probed drive type in drive_flags (we were out of drive flags anyway).
- rename DRIVE_ATAPIST to DRIVE_ATAPIDSCW to better reflect what this
really is
- remove ata_channel->ata_drives, it's redundant with the pointer in
ata_drive_datas
- factor out the interpretation of SATA signatures in sata_interpet_sig()
propagate these changes to the ATA HBA drivers, and add support for PMP
to ahcisata(4) and siisata(4).
Thanks to:
- Protocase (http://www.protocase.com/) which provided a system
with lots of controllers, SATA PMP and drive slots
- Conservation Genomics Laboratory, Department of Biology, New Mexico State
University for hosting the above system
- Brook Milligan, who set up remote access and has been very responsive
when SATA cable move was needed
|
| 1.29 |
| 19-Jul-2011 |
dyoung | branches: 1.29.2;
Change <machine/bus.h> to <sys/bus.h> throughout.
Split bus.h -> bus_{defs,funcs}.h.
Mark acorn32/bus.h obsolete.
|
| 1.28 |
| 12-May-2009 |
cegger | use device_xname()
|
| 1.27 |
| 18-Mar-2008 |
cube | branches: 1.27.4; 1.27.18;
Split device_t and softc for ATA devices, as well as wd(4). Other
cosmetic changes where appropriate.
|
| 1.26 |
| 09-Oct-2006 |
bjh21 | branches: 1.26.28; 1.26.30; 1.26.50; 1.26.54;
The correct number of elements to insert into cmd_iohs is WDC_NREG. Using
larger numbers risks a buffer overflow and panic. Bug spotted by Mike Pumford.
Patch compile-tested only, but it's obviously correct.
|
| 1.25 |
| 16-Jan-2006 |
bouyer | branches: 1.25.18; 1.25.20;
properly use ata_channel->ch_ndrive:
- initialize it properly in the bus front-ends (all 2, exept in wdc_pcmcia.c
for the "Sandisk CompactFlash Card" where it's set to 1)
- remplace hardcoded '2' by ata_channel->ch_ndrive in MI IDE drivers.
From Christos Zoulas in kern/32501.
|
| 1.24 |
| 11-Dec-2005 |
christos | branches: 1.24.2;
merge ktrace-lwp.
|
| 1.23 |
| 20-Aug-2004 |
thorpej | branches: 1.23.12;
Move most of wdc_softc into a new atac_softc structure that contains
info common to all types of ATA controllers.
|
| 1.22 |
| 14-Aug-2004 |
thorpej | - Split the register handles out of struct wdc_channel into a separate
wdc_regs structure, and array of which (indexed per channel) is pointed
to by struct wdc_softc.
- Move the resulting wdc_channel structure to atavar.h and rename it to
ata_channel. Rename the corresponding flags.
- Add a "ch_ndrive" member to struct ata_channel, which indicates the
maximum number of drives that can be present on the channel. For now,
this is always 2. Add an ATA_MAXDRIVES constant that places an upper
limit on this value, also currently 2.
|
| 1.21 |
| 25-May-2004 |
thorpej | Add the notion of "shadow registers" to the wdc driver. These shadow
registers are registers that overlap with others on many controllers, but
which may actually be distinct on some controllers. Right now, the two
shadows are:
- wd_status (usually overlaps wd_command)
- wd_features (usually overlaps wd_error)
Add a new helper function, wdc_init_shadow_regs(), used to initialize
the shadow register handles on controllers where they do actually overlap.
Partially from Jordan Rhody @ Wasabi Systems, Inc.
|
| 1.20 |
| 03-Jan-2004 |
thorpej | More wdc_channel structure member namespace cleanup:
- channel -> ch_channel
- wdc -> ch_wdc
|
| 1.19 |
| 03-Jan-2004 |
thorpej | Rename "struct channel_softc" to "struct wdc_channel".
|
| 1.18 |
| 01-Jan-2004 |
thorpej | Rename:
- wdc_xfer to ata_xfer
- channel_queue to ata_queue
and move them to <dev/ata/atavar.h> so they can be used by non-wdc ATA
controllers. Clean up the member names of these structures while at it.
|
| 1.17 |
| 31-Dec-2003 |
thorpej | Simplify allocation of the channel queue.
|
| 1.16 |
| 02-Dec-2003 |
bjh21 | Update for new world of indirect wdc registers.
|
| 1.15 |
| 19-Oct-2003 |
he | Adapt to the new wdcattach() signature.
|
| 1.14 |
| 08-Oct-2003 |
bouyer | Adapt for wdcattach() prototype change.
|
| 1.13 |
| 25-Sep-2003 |
mycroft | Hide the use of config_interrupts() in one place.
|
| 1.12 |
| 24-Sep-2003 |
mycroft | Take a stab at making this compile, at least.
|
| 1.11 |
| 21-Sep-2003 |
matt | Adapt to new wdcattach calling conventions.
|
| 1.10 |
| 02-Oct-2002 |
thorpej | branches: 1.10.8;
Fix script-o's in previous.
|
| 1.9 |
| 02-Oct-2002 |
thorpej | Use CFATTACH_DECL().
|
| 1.8 |
| 01-Oct-2002 |
bjh21 | Constify ide_versions.
|
| 1.7 |
| 27-Sep-2002 |
thorpej | Declare all cfattach structures const.
|
| 1.6 |
| 15-Sep-2002 |
bjh21 | Cleanup: Remove no-longer-accurate comment, un-__P, ANSIfy, __KERNEL_RCSID,
other light KNF.
|
| 1.5 |
| 15-Sep-2002 |
bjh21 | Allocate channel structures as part of the softc rather than malloc'ing them
at run time. This simplifies the code and avoids problems with uninitialised
variables, and if it's good enough for pciide(4), it's good enough for me.
Also normalise the prefix for channel-specific messages.
|
| 1.4 |
| 14-Sep-2002 |
bjh21 | On ARCIN v6 cards, clear the EPROM page latch on shutdown. This seems to be
necessary to allow the card to be detected afterwards. In theory, this
shouldn't be necessary, since we don't touch the page latch yet, but I'm not
going to argue.
|
| 1.3 |
| 22-May-2002 |
bjh21 | Substantial overhaul of podule IDs. Unlike on PCI or USB, podule IDs are
assigned by RISCOS Ltd (and were assigned by Acorn) to be unique across all
manufacturers. This means that associating each one with a manufacturer (and
checking the manufacturer when attaching) is bogus. Thus, we don't do that
any more.
This should have the pleasant side-effect of getting APDL IDE interfaces
working, since they're just ICS ones with a different manufacturer ID.
|
| 1.2 |
| 27-Nov-2001 |
thorpej | branches: 1.2.2; 1.2.10; 1.2.12;
Use <machine/intr.h>, not <machine/irqhandler.h>
|
| 1.1 |
| 05-Oct-2001 |
reinoud | branches: 1.1.4;
Initial commit of the splitting off of arch/acorn32 from arch/arm32.
The IOMD/VIDC combination is now moved to arch/arm/iomd together. These
files still need a lot of cleaning up :( .... esp. the RC7500 support that
is still dormant in it; this needs either to be removed or split out for
RC7500's ``VIDC'' video/audio variant.
Apart from the RC7500 support wich is still in arch/arm32 the
iomd,vidc,riscpc and podulebus subdirectories of arch/arm32 can be removed.
This split still uses some small parts of arch/arm32 .... those are the MI
parts that haven't been moved yet.
RiscPC/A7000 have been tested and confirmed to build as should NC.
|
| 1.1.4.5 |
| 18-Oct-2002 |
nathanw | Catch up to -current.
|
| 1.1.4.4 |
| 17-Sep-2002 |
nathanw | Catch up to -current.
|
| 1.1.4.3 |
| 20-Jun-2002 |
nathanw | Catch up to -current.
|
| 1.1.4.2 |
| 08-Jan-2002 |
nathanw | Catch up to -current.
|
| 1.1.4.1 |
| 05-Oct-2001 |
nathanw | file icside.c was added on branch nathanw_sa on 2002-01-08 00:22:46 +0000
|
| 1.2.12.1 |
| 01-Nov-2002 |
tron | Pull up revision 1.3 (requested by chris in ticket #120):
Substantial overhaul of podule IDs. Unlike on PCI or USB, podule IDs are
assigned by RISCOS Ltd (and were assigned by Acorn) to be unique across all
manufacturers. This means that associating each one with a manufacturer (and
checking the manufacturer when attaching) is bogus. Thus, we don't do that
any more.
This should have the pleasant side-effect of getting APDL IDE interfaces
working, since they're just ICS ones with a different manufacturer ID.
|
| 1.2.10.1 |
| 30-May-2002 |
gehenna | Catch up with -current.
|
| 1.2.2.4 |
| 10-Oct-2002 |
jdolecek | sync kqueue with -current; this includes merge of gehenna-devsw branch,
merge of i386 MP branch, and part of autoconf rototil work
|
| 1.2.2.3 |
| 23-Jun-2002 |
jdolecek | catch up with -current on kqueue branch
|
| 1.2.2.2 |
| 10-Jan-2002 |
thorpej | Sync kqueue branch with -current.
|
| 1.2.2.1 |
| 27-Nov-2001 |
thorpej | file icside.c was added on branch kqueue on 2002-01-10 19:36:33 +0000
|
| 1.10.8.4 |
| 21-Sep-2004 |
skrll | Fix the sync with head I botched.
|
| 1.10.8.3 |
| 18-Sep-2004 |
skrll | Sync with HEAD.
|
| 1.10.8.2 |
| 25-Aug-2004 |
skrll | Sync with HEAD.
|
| 1.10.8.1 |
| 03-Aug-2004 |
skrll | Sync with HEAD
|
| 1.23.12.3 |
| 24-Mar-2008 |
yamt | sync with head.
|
| 1.23.12.2 |
| 30-Dec-2006 |
yamt | sync with head.
|
| 1.23.12.1 |
| 21-Jun-2006 |
yamt | sync with head.
|
| 1.24.2.1 |
| 01-Feb-2006 |
yamt | sync with head.
|
| 1.25.20.1 |
| 22-Oct-2006 |
yamt | sync with head
|
| 1.25.18.1 |
| 18-Nov-2006 |
ad | Sync with head.
|
| 1.26.54.1 |
| 03-Apr-2008 |
mjf | Sync with HEAD.
|
| 1.26.50.1 |
| 24-Mar-2008 |
keiichi | sync with head.
|
| 1.26.30.1 |
| 23-Mar-2008 |
matt | sync with HEAD
|
| 1.26.28.1 |
| 21-Mar-2008 |
chris | Sync with head.
|
| 1.27.18.1 |
| 13-May-2009 |
jym | Sync with HEAD.
Commit is split, to avoid a "too many arguments" protocol error.
|
| 1.27.4.1 |
| 16-May-2009 |
yamt | sync with head
|
| 1.29.2.1 |
| 30-Oct-2012 |
yamt | sync with head
|
| 1.32.28.2 |
| 27-Sep-2017 |
jdolecek | change wdc_init_shadow_regs() to accept only struct wdc_regs, it doesn't
touch anything else
factor out the probe-only struct ata_channel initialization to wdcprobe(), to
reduce duplication of logic in individual drivers, and to actually work now
that more init is needed beyond the memset()
|
| 1.32.28.1 |
| 24-Apr-2017 |
jdolecek | use ata_queue_alloc() to dynamically allocate ata_queue for ata channel
|
| 1.32.2.1 |
| 03-Dec-2017 |
jdolecek | update from HEAD
|
