| History log of /src/sys/arch/arm/sunxi/sun50i_a64_ccu.c |
| Revision | | Date | Author | Comments |
| 1.25 |
| 13-Oct-2025 |
thorpej | Use device_{get,set}prop_bool().
|
| 1.24 |
| 07-Nov-2021 |
jmcneill | sunxi: sun50i-a64: add support for A64_CLK_CPUX clock
|
| 1.23 |
| 27-Jan-2021 |
thorpej | Rename of_match_compat_data() to of_compatible_match(). Similarly,
rename of_search_compatible() to of_compatible_lookup().
Standardize on of_compatible_match() for driver matching, and adapt
all call sites.
|
| 1.22 |
| 08-Dec-2019 |
jmcneill | branches: 1.22.8;
Add SUNXI_CCU_NM_ROUND_DOWN to CE clock, fix pll parents to use 2X outputs
|
| 1.21 |
| 08-Dec-2019 |
jmcneill | Add crypto engine clock
|
| 1.20 |
| 24-Nov-2019 |
jmcneill | Try to avoid changing hardware settings when the "nomodeset" kernel arg
is present.
|
| 1.19 |
| 23-Nov-2019 |
jmcneill | Set video PLLs to 297MHz
|
| 1.18 |
| 23-Nov-2019 |
jmcneill | Set TCON1 parent to PLL_VIDEO1(1X)
|
| 1.17 |
| 23-Nov-2019 |
jmcneill | Add TCON0 clock
|
| 1.16 |
| 22-Nov-2019 |
jmcneill | Fix CLK_BUS_HDMI bit
|
| 1.15 |
| 17-Nov-2019 |
jmcneill | Add SPI clocks
|
| 1.14 |
| 17-Nov-2019 |
jmcneill | Add support for A64 I2S clocks.
|
| 1.13 |
| 01-Jul-2019 |
jmcneill | branches: 1.13.2;
Fix gpu clock parent
|
| 1.12 |
| 27-Jun-2019 |
jmcneill | Add GPU clocks
|
| 1.11 |
| 30-Jan-2019 |
jmcneill | Add support for Allwinner A64's display pipeline.
|
| 1.10 |
| 22-Jan-2019 |
jmcneill | Add sun50i DE clocks.
|
| 1.9 |
| 18-May-2018 |
jmcneill | branches: 1.9.2;
Set SUNXI_CCU_NM_DIVIDE_BY_TWO on mmc module clocks. There is an
undocumented post divider between the clock and mmc module.
|
| 1.8 |
| 18-May-2018 |
jmcneill | MMC clock source is the pll_periph's 2X output.
|
| 1.7 |
| 10-May-2018 |
jmcneill | Add PLL_CPUX clock
|
| 1.6 |
| 09-May-2018 |
jmcneill | Fix locations of bus gates
|
| 1.5 |
| 08-May-2018 |
jmcneill | Add audio clocks
|
| 1.4 |
| 05-May-2018 |
jmcneill | Add support for A64 thermal sensor clocks
|
| 1.3 |
| 07-Sep-2017 |
jmcneill | branches: 1.3.2; 1.3.4;
Remove AHB2 source select init for now, it seems to cause EMAC RX problems
|
| 1.2 |
| 07-Sep-2017 |
jmcneill | Fix bit offsets for OHCI
|
| 1.1 |
| 07-Sep-2017 |
jmcneill | Add support for Allwinner A64 SoCs.
|
| 1.3.4.2 |
| 26-Jan-2019 |
pgoyette | Sync with HEAD
|
| 1.3.4.1 |
| 21-May-2018 |
pgoyette | Sync with HEAD
|
| 1.3.2.2 |
| 03-Dec-2017 |
jdolecek | update from HEAD
|
| 1.3.2.1 |
| 07-Sep-2017 |
jdolecek | file sun50i_a64_ccu.c was added on branch tls-maxphys on 2017-12-03 11:35:56 +0000
|
| 1.9.2.2 |
| 13-Apr-2020 |
martin | Mostly merge changes from HEAD upto 20200411
|
| 1.9.2.1 |
| 10-Jun-2019 |
christos | Sync with HEAD
|
| 1.13.2.4 |
| 18-May-2020 |
martin | Pull up following revision(s) (requested by riastradh in ticket #912):
sys/arch/arm/dts/sun50i-a64.dtsi: revision 1.14
sys/arch/evbarm/conf/GENERIC64: revision 1.116
sys/arch/evbarm/conf/GENERIC64: revision 1.131
sys/arch/arm/sunxi/sun50i_a64_ccu.c: revision 1.21
sys/arch/arm/sunxi/sun50i_a64_ccu.c: revision 1.22
sys/arch/arm/sunxi/sun8i_crypto.c: revision 1.10
sys/arch/arm/sunxi/sun8i_crypto.c: revision 1.11
sys/arch/arm/sunxi/sun8i_crypto.c: revision 1.12
sys/arch/arm/sunxi/sun8i_crypto.c: revision 1.1
sys/arch/arm/sunxi/sun8i_crypto.c: revision 1.2
sys/arch/arm/sunxi/sun8i_crypto.c: revision 1.3
sys/arch/arm/sunxi/sun8i_crypto.h: revision 1.1
sys/arch/arm/sunxi/sun8i_crypto.c: revision 1.4
sys/arch/arm/sunxi/sun8i_crypto.c: revision 1.5
sys/arch/arm/sunxi/sun8i_crypto.c: revision 1.6
sys/arch/arm/sunxi/sun8i_crypto.c: revision 1.7
sys/arch/arm/sunxi/sun8i_crypto.c: revision 1.8
sys/arch/arm/sunxi/sun8i_crypto.c: revision 1.9
sys/arch/arm/sunxi/files.sunxi: revision 1.67
Add crypto engine clock
Add SUNXI_CCU_NM_ROUND_DOWN to CE clock, fix pll parents to use 2X outputs
Add crypto engine block.
Draft driver for Allwinner Crypto Engine.
Found on, e.g., the Pinebook.
Only used for TRNG at the moment, but hooking it up to opencrypto(9)
shouldn't be too hard if anyone still cares about that these days.
The distribution of the alleged TRNG is very nonuniform distributed
seems to alternate between toward runs with exceptionally high
fractions of 0 bits and runs with exceptionally high fractions of 1
bits -- initially all my samples were mostly 0's, and then all my
samples were mostly 1's, and now I'm seeing more oscillation between
these runs.
So I've wired it up as RND_TYPE_UNKNOWN, not RND_TYPE_RNG (it will
immediately flunk our rngtest and be disabled), and I estimated it to
provide at most one bit of entropy per byte of data -- which may
still be optimistic. I also added a sysctl node hw.sun8icryptoN.rng
to read out 1024-byte samples for analysis, and I left the driver
commented out in GENERIC64 for now.
(If anyone has contacts at Allwinner who can tell us about how the
alleged TRNG is supposed to work, please let me know!)
Reduce some duplicated bus_dma clutter.
Factor out some of the self-test logic used for debugging.
Add missing bus_dmamap_sync(POSTWRITE) while here.
Make sure ERESTART doesn't come flying out to userland.
I picked ERESTART to mean `all channels are occupied' because that's
what opencrypto(9) uses to decide whether to queue a request, but
it's not appropriate for sysctl(2) to return that.
Avoid a race between interruption and reacquisition of lock.
Otherwise, we would have leaked the memory in this case.
Tidy up comments.
Oops -- forgot to kmem_free.
Fix typo -- acknowledge interrupts _and_ errors.
Reduce entropy estimate for sun8icrypto TRNG.
NIST's SP800-90B entropy estimation tools put it at no more than .08
bits of entropy per byte of data(!), so estimate 100 bits of data per
bit of entropy. This is probably not conservative enough -- the NIST
tools were written without knowledge of how this alleged TRNG works!
Knowledge of the physics of how the TRNG is supposed to work could
probably enable a better job at predicting the outputs.
While here, bump the size of data we can sample directly with sysctl
to 4096 bytes.
Enable sun8icrypto in GENERIC64.
But set its entropy estimate to zero until we have a better idea of
how it works. Can't really hurt this way unless sun8icrypto is
maliciously dependent on all other inputs to the entropy pool, which
seems unlikely.
Fix (presently harmless) psato.
Don't overwrite cy_root_node; use cy_trng_node as intended.
Fix previous brainfart.
Don't use the uninitialized trng node as the root node -- derp.
Instead, use the root node as the root node, and initialize the trng
node here.
|
| 1.13.2.3 |
| 25-Nov-2019 |
martin | Pull up following revision(s) (requested by jmcneill in ticket #470):
sys/arch/arm/sunxi/sunxi_hdmiphy.c: revision 1.4
sys/arch/arm/sunxi/sun50i_a64_ccu.c: revision 1.16
sys/dev/ic/dw_hdmi.c: revision 1.5
sys/arch/arm/sunxi/sunxi_hdmiphy.h: revision 1.2
sys/arch/arm/sunxi/sun50i_a64_ccu.c: revision 1.17
sys/dev/ic/dw_hdmi.c: revision 1.6
sys/arch/arm/sunxi/sun50i_a64_ccu.c: revision 1.18
sys/arch/arm/sunxi/sun50i_a64_ccu.c: revision 1.19
sys/dev/ic/dw_hdmi.h: revision 1.5
sys/arch/arm/sunxi/sunxi_mixer.c: revision 1.8
sys/arch/arm/sunxi/sunxi_mixer.c: revision 1.9
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.22
sys/arch/arm/sunxi/sunxi_dwhdmi.c: revision 1.5
sys/arch/arm/sunxi/sunxi_dwhdmi.c: revision 1.6
sys/arch/arm/sunxi/sunxi_dwhdmi.c: revision 1.7
sys/arch/arm/sunxi/sunxi_dwhdmi.c: revision 1.8
sys/arch/arm/sunxi/sun50i_a64_ccu.c: revision 1.20
sys/arch/arm/sunxi/sunxi_mixer.c: revision 1.10
sys/arch/arm/dts/sun50i-a64-pinebook.dts: revision 1.17
sys/arch/arm/sunxi/sunxi_platform.c: revision 1.38
sys/dev/fdt/fdt_port.c: revision 1.3
sys/dev/fdt/fdt_port.c: revision 1.4
sys/arch/arm/sunxi/sunxi_ccu_fractional.c: revision 1.5
sys/arch/arm/sunxi/sunxi_lcdc.c: revision 1.7
sys/arch/arm/sunxi/sunxi_ccu_fractional.c: revision 1.6
sys/arch/arm/sunxi/sunxi_hdmiphy.c: revision 1.3
Fix CLK_BUS_HDMI bit
Enable TMDS clock
Store the flags passed to SUNXI_CCU_FRACTIONAL macro.
Previously the macro dropped the flags argument entirely, and did not
initialize the structure with it.
Allow bus glue to setup DDC clocks
Add TCON0 clock
HDMI PHY and TX share the same clocks. Do not enable clocks until both
reset resources have been deasserted. Explicitly set DDC clock dividers.
Honour SUNXI_CCU_FRACTIONAL_SET_ENABLE in fractional mode
Use fdtbus_get_reg to read "reg" property
Need to initialize the PHY before HPD sense and DDC will work
Set pixel clock on mode set
Set TCON1 parent to PLL_VIDEO1(1X)
Do not assume that an fb's pitch is width * 4 bytes.
Use actual hw mode, not proposed mode.
Set pre-divider M to 0 in fractional mode, as noted in user manual. Spotted by jak.
Support non-zero fb start pixels.
Set video PLLs to 297MHz
Do not assume the cursor pitch is the same as the primary fb
Enable HDMI and HDMI audio
Try to avoid changing hardware settings when the "nomodeset" kernel arg
is present.
|
| 1.13.2.2 |
| 18-Nov-2019 |
martin | Pull up following revision(s) (requested by jmcneill in ticket #439):
sys/arch/evbarm/conf/GENERIC64: revision 1.115
sys/arch/arm/sunxi/sun50i_a64_ccu.c: revision 1.15
Add SPI clocks
Add sun6ispi
|
| 1.13.2.1 |
| 18-Nov-2019 |
martin | Pull up following revision(s) (requested by jmcneill in ticket #437):
sys/arch/arm/dts/sun50i-a64-sopine-baseboard.dts: revision 1.2
sys/arch/arm/sunxi/sunxi_ccu_div.c: revision 1.6
sys/arch/arm/dts/sun50i-a64.dtsi: revision 1.13
sys/arch/arm/dts/sun50i-a64-pine64.dts: revision 1.2
sys/arch/arm/sunxi/sunxi_dwhdmi.c: revision 1.4
sys/arch/arm/dts/sun50i-a64-pine64-plus.dts: revision 1.3
sys/arch/arm/sunxi/sunxi_i2s.c: revision 1.7
sys/arch/arm/sunxi/sun50i_a64_ccu.c: revision 1.14
Add support for A64 I2S clocks.
Add A64 HDMI audio support.
Enable HDMI audio support on Pine64, Pine64+, and Pine64 LTS boards.
|
| 1.22.8.1 |
| 03-Apr-2021 |
thorpej | Sync with HEAD.
|
